GE (W)/HSR-42/2024-25 COMPREHENSIVE B/R MAINTENANCE OF BLDGS OF ZONE B AT HISAR MIL STN UNDER GE (W) HISAR

Amount

S&F, PVC Floor trap 75mm bore with grating including jointing using solvent cement to waste pipe fixed in cement concrete type B1 (1:2:4) in repair complete all as specified and directed.

Dismantling 75mm dia and upto 150mm dia drain of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches/wall, if required complete all as specified and directed.

S&F, 110mm dia PVC bend any radius complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) pipes75 mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed.

S&F PVC (SWR) pipes75 mm bore single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed.

S&F PVC (SWR) bends 110 mm bore with/without access door any radius complete all as specified and directed.

S&F PVC (SWR) bends 75mm bore with/without access door any radius complete all as specified and directed.

S&F PVC (SWR) single junction 'T' 75 mm bore with access door any radius complete all as specified and directed.

S&F PVC (SWR) single junction 'T' 110 mm bore with access door any radius complete all as specified and directed.

Taking up or down 15mm bore dia, steel tubing & connections incl cleaning for refixing or removal to store.

Taking up or down for 20mm bore steel water tubing galvanised with connection complete all as specified and directed.

S&F steel water tubing galvanised 15mm bore, med grade fixed to walls and ceiling or in floor complete all as specified and directed.

S&F steel water tubing galvanised 20mm bore, medium grade with all fittings fixed to wall and ceiling or in floor complete all as specified and directed.

Supplying and laying of 20 mm dia CPVC pipes SDR 11 & fittings on walls/ceilings or laying in floors complete all as specified and directed.

S&F Brass Elbow for special fitting of 20 mm bore CPVC pipe complete all as specified and directed.

S&F Brass Tee for special fitting of 20 mm bore CPVC pipe complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding complete all as specified and directed.

M&L glazed ceramic coloured tiles, (350x450)x7mm / (350x250)x7mmthick as in vertical surfaces like dado or skirting over 10mm thick in CM 1:4 set & joined in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M&L Non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for coloured non-skid tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M & L, vitrified ceramic tiles 10mm thick light shade (square or rectangular) area of each tile not .exceeding 0.36 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade, over and including 15mm thick cement sand screed in CM 1:6 complete all as specified and directed.

M&L for vitrified ceramic tiles (light shade) 10mm thick (square /rectangular) polished, area of each tiles not exceeding 0.36 sqm. in skirting etc set and jointed in neat cement slurry ad pointed in white or coloured cement to the match over and including 10mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

M & L, vitrified ceramic tiles 10mm thick dark shade/duble charger/ultra charger shade (square or rectangular) area of each tile exc 0.42sqm but n.exceeding 1.00 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade, over and including 15mm thick cement sand screed in CM 1:6 complete all as specified and directed.

M&L for Vitrified ceramic tiles (light shade) 10mm thick (square /rectangular) polished, area of each tiles exceeding 0.42 but not exc1.00 sqm. in skirting etc set and jointed in neat cement slurry ad pointed in white or coloured cement to the match over and including 10mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

Supply only water proofing compound complete all as specified and directed.

S&F in repair vitreous china squatting pan "ORISSA" pattern size 580mm x 440mm, white with integral foot rest including PVC/CI 'P' or 'S' trap and WC Connector with leaping ring connection to trap includintg cement concrete, and to flushing pipe, anti-syphonage pipe, etc. including making good to floor complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding and flush pipe) complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (semi pedestal pattern),Anglo-indian type, white (excluding and flush pipe) complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of 450 mm long complete all as specified and directed.

S&F in repair, PVC Low Level cistern 10 litre capacity, valveless, syphonic action type with float, handle including 32mm dia flush pipe of polyethylene of low or high density or PVC & bracket etc, including complete all as specified and directed.

S&F Vitreous china wash basin white flat back size 550 x 400mm size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe and 15mm pillar tap cast copper alloy with capstan head chromium plated complete fixed in repair complete all as specified and directed.

S&F Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm chromium plated cast copper alloy bib taps fixed in repair complete all as specified and directed.

S&F in repair fancy type chromium plated Angle valves, cast copper alloy with cruitch or butterfly handles screwed down high pressure, screwed both ends for 15mm bore iron pipe or brrass ferrule complete all as specified and directed.

S&F in repair fancy type chromium plated with long shank and cup (concealed type) stop valves, cast copper aloy with cruitch or butterfly handles screwed down high pressure, screwed both ends for 15mm bore iron pipe or brass ferrule complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125mm size fitted to steel pipe or union complete all as specified and directed.

Dismantling water tanks exceeding 250 and not exceeding 500 litres capacity and removing to store complete all as specified and directed. Note:- Disturbed surface should be make good by 20 mm graded stone PCC.

S&F rotational moulded polyethylene water storage tanks (tripple layer White in colour cylindrical vertical with closed top) of 500 litres capacity, hoisted and fixed in position including connecting up pipes i.e. nipple socket / unions etc fixed in repairs complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. of capacity exc 500 ltr but n.exc 1000 ltr complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. of capacity exc 250 ltr but n.exc 500 ltr complete all as specified and directed.

S&F Ball valves, high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball , screwed for iron pipe or brass ferrule 20mm bore complete all as specified and directed.

S&F Ball valves, high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball , screwed for iron pipe or brass ferrule 20mm bore fixed in repairs complete all as specified and directed.

S&F Ball valves, high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball , screwed for iron pipe or brass ferrule 15mm bore fixed in repairs complete all as specified and directed.

S&F Grating round 140 mm size of PTMT with hole or without hole fixed in repair complete all as specified and directed.

S&F as in repair 15mm bore Pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore complete all as specified and directed.

S&F gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed for 20mm bore pipe complete all as specified and directed.

Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed.

M&L, 15mm thick rendering in Cement Mortar 1:6 to brick/concrete wall surfaces trowelled to even & smooth without using extra cement complete all as specified and directed.

Description all as per item No 49.00 above but in Cement Mortar 1:4 including WPC complete all as specified and directed.

M&L, 10mm thick rendering in Cement Mortar 1:3 to brick/concrete ceiling including extra dubbing/ floating to making good surface surfaces trowelled to even & smooth without using extra cement complete all as specified and directed.

Complete removal of existing treatment on walls and roughening surfaces of old plaster by picking sweeping clean and washing down with water to remove dust etc to recceve rough plaster complete all as specified and as directed.

M&L for 10mm thick cement plaster in Cement Mortar 1:4 as in backing coat for rough plaster complete all as specified and as directed.

M&L for Rough cast plaster with rough mixture consisting of crushed stone or fine gravel agg, size 6 to 12mm mixed with course sand and cement in the ratio of 1:1:1 shall be applied and finished even on external wall complete all as specified and as directed.

M & L two coat of oil bound distemper over a coat of primer on newly plastered surfaces of walls including preparation of surfaces complete all as specified and directed.

M & L one coat of oil bound distemper on old plastered surfaces of walls including preparation of surfaces complete all as specified and directed.

M & L two coat of cement base paint on new surfaces of walls including preparation of surfaces complete all as specified and directed.

M & L one coat of cement base paint on old surfaces of walls including preparation of surfaces completeall as specified and directed.

M&L of three coat of white wash on newly plastered surface as on celing including preparation complete all as specified and directed.

M&L of two coat of white wash on old plastered surface as on celing including preparation complete all as specified and directed.

Taking down chowkhats or frame n exc 1.50 Sqm each with shutters (Without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkhats or frame exc 1.50 Sqm but n exc 4 Sqm each with shutters (Without taking off shutters from the frames) complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm & nexc 2 Sqm each resecuring, easing and adjusting and re-fixing in the same opening complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm & nexc 2 Sqm each complete all as specified and directed.

S & F for pressed steel frames of size 105 X 60 mm with one or more rebates including necessary fixing lugs, butt hinges, locks strike plate etc (thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:6 complete all as specified and directed

S & F for pressed steel frames of size 125 X 60 mm with one or more rebates including necessary fixing lugs, butt hinges, locks strike plate etc (thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:6 complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20mm Graded Stone Aggregate) as in filling of Chowkhats complete all as specified and directed.

S & F 2nd class Hard Wood 35mm thick panelled shutters with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Pt-I) kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F flush shutter 30 mm thick, solid core construction, with block board core and both face covered with decorative face veneer with lipping/frame to match plywood face panels complete all as specified and directed.

S&F 2nd class Hard Wood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR PartI, Section 8, clause 8.24 (a) complete all as specified and directed.

Providing and fixing factory made 100% solid WPC (wood polymer composite)- door frame of size 75mmx50mm made from wood polymer composite (single extruded process) material comprising of virgin PVC polymer of K value 57-60(suspensive Grade), calcium carbonate and natural fibers (wood powder/rice Husk/wheat husk) and non toxic additivies fabricated with meter joints after applying PVC solvent cement & screwed with full body threaded star headed screws having minium frame density of 780Kg/cbm manufacture by and ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawel strength of (Min 990N/mm, minimum copressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof,water/moisture proof & fire retardent & fixed in position with SS draft fasteners/hold fast of required dia and length for WC/Bathroom/Toilet and external uses complete all as specified and directed.

Providing and fixing 30mm thick factory made 100% solid WPC (wood polymer composite) solid plain/prelam/enrouted plain/enrouted painted flush door shutter of required size comprising of virgin PVC resin of K value 57-60(suspension grade) calclum carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives made from Extrusion process WPC foam sheet single extruded (inner) with density not less than 650 kg/cbm manufacture by an ISO 9001-2015 certificate company, having good screw holding capcity (screw withdrawl strength of 2000 n (face) and 1100 N (edge) minimum copmressive strength of 50 n/mm2, Modulus of elasticity 850/N/mm2 and resistance of spread flame of class A category with property of being termite/borer free, water/moisture proof, fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws for WC/bathroom/toilet/Kitchen/Balcony doors complete all as specified and directed.

S & F GI wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed in steel windows and wooden shutters complete all as specified and directed.

S & F in repair GI wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed in steel windows and wooden shutters including necessay arrangements like welding etc complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolt of extruded section and fixed, 150 mm size complete all as specified and directed.

S&F in repair aluminium, anodised, barrel tower bolt of extruded section and fixed, 150 mm size complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolt of extruded section and fixed, 200 mm size complete all as specified and directed.

S&F in repair aluminium, anodised, barrel tower bolt of extruded section and fixed, 200 mm size complete all as specified and directed.

S&F Extruded aluminium alloy handles, fabricated type, anodised 125 mm long complete all as specified and directed.

S&F in repair Extruded aluminium alloy handles, fabricated type, anodised 125 mm long for cup boards and PVC doors complete all as specified and directed.

S&F extruded aluminium alloy handles fabricated types, anodised, size 150 mm complete all as specified and directed.

S&F in repair extruded aluminium alloy handles fabricated types, anodised, size 150 mm complete all as specified and directed.

S&F extruded aluminium alloy ,anodised ,sliding door bolt 250 mm in length with hasp, staple (bolt type) and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

S&F in repair extruded aluminium alloy ,anodised ,sliding door bolt 250 mm in length with hasp, staple (bolt type) and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

S&F extruded aluminium alloy ,anodised ,sliding door bolt 150 mm in length with hasp, staple (bolt type) and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

S & F MS butt hinges medium weight cold rolled mild steel 75mm long complete all as specified and directed.

S & F in repair MS butt hinges medium weight cold rolled mild steel 75mm long in wooden/ steel/ iron frame complete all as specified and directed.

S&F rubber beading to aluminium door / window / aluminium frame and like of best quality complete all as specified and directed.

S&F in repair rubber beading to aluminium door / window / aluminium frame and like of best quality complete all as specified and directed.

S&F in repair door handle 2 nos for aluminium door / window / aluminium frame and like of best quality complete all as specified and directed.

S&F 12mm thick Veneered particle board, solid core, interior grade, with decorative face veneers one face complete all as specified and directed.

S&F in repair door closer Aluminium (Die cast) body hydraulic regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and directed.

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Hacking out old broken glass exc 1.5 sqm (any thicknes, size and description) from wooden / metal frames glazed with putty or fixed with beads complete on any storey of the bldg complete all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality & glazing with oil putty in square n.exc 0.5 sqm each pane complete all as specified and directed.

S&F 3 mm thick figured glass pin head type in square n.exc 0.5 sqm each pane complete all as specified and directed.

S&F sheet glass 4 mm thick ordinary quality in squares n exc 0.5 sq m each pane complete all as specified and directed.

S&F sheet glass 4.8 mm thick ordinary quality in squares n exc 0.5 sq m each pane complete all as specified and directed.

M&L preparation of new steel surfaces of any description, over 10 cm in width or girth, and applying two coats of synthetic enamel paint complete all as specified and directed.

M & L for preparations of new or previously untreated wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer to wooden surfaces complete all as specified and directed.

S & F in repair mild steel, 4-lever, mortice lock, vertical type, size 100mm complete all as specified and directed.

S & F mild steel 25 mm dia drapery rod, decorative type, with PVC coating and fixed in repairs complete all as specified and directed.

S & F MS bracket, decorative, superior quality, suitable for 25 mm dia drapery rods, complete all as specified and directed.

S&F Floor door stopper of aluminium alloy body 150 mm long with rubber shoes complete all as specified and directed.

S&F Floor door stopper of aluminium alloy body 150 mm long with rubber shoes fixed in repair complete all as specified and directed.

Repair/adjust Pivote and fixture of old double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repair including taking down existing aluminium door and re-fixing the after carryout necessary repair work complete all as specified and directed.

S & F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repair, including taking down existing aluminium door and re-fixing the after carryout necessary repair work , securing Rubber beading, aluminium cleat/beading complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Brickwork with old size flyash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed.

S & F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished in repair complete all as specified and directed.

M&L taking down Aluminium door of size exc 1.50 sqm but n.exc 2.50 sqm & refixing the same after carryout necessary repair work /securing/adjustments the loose parts and Replaced the damge parts with new including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc complete all as specified and directed.

M&L taking down Aluminium door of size exc 2.50 sqm but n.exc 3.50 sqm & refixing the same after carryout necessary repair work /securing/adjustments the loose parts and Replaced the damge parts with new including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc complete all as specified and directed.

S&F Powder coated Anodised aluminium frame for doors, windows ventilators and partition with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sectionsweighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminiumsnap beading, screws, anodised aluminium fittings such as peg stays150mm long (1 no.). hinges type B-21100mm long (2 no.) suitable handle (1no.) complete all as specified and directed. Note : (i) Glass panes and wire cloth shall be measured & paid separately . (ii) Rubber beading will not be weighed and not to be paid seperately.

S&F Anodised aluminium door shutters/partition ,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified and directed. Note : (i) Glass panes and wire cloth shall be measured & paid separately . (ii) Rubber beading will not be weighed and not to be paid seperately.

Dismantling of Brick tiles or terracing tiles, single layer on roof and removing complete all as specified and directed.

Demolition of Mud in roofs, any thickness,including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.

M&L for cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate in padding ,levelling course and the like finish even and Fair 50mm average thickness or as required at site including preparation of RCC roof surface(old or new) with wire brush , drying and cleaning top remove loose particles, filling the cracks by crack filler complete all as specified and directed.

S&F 40mm thick brick tiles laid on 15mm thick screed of cement mortar(1:6) and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on PCC padding complete all as specified and directed.

Description all as per item No 119.00 above but except bricks tiles complete all as specified and directed.

M&L for flush pointing to bricks laid flat or brick tiles over roof in cement morter (1:3) inlcuding handing out/ taking out old pointing complete all as specified and directed.

S&F as in repair brass Mortice lock, vertical type, 4 lever size 100 mm complete all as specified and directed.

S&F as in repair brass Mortice lock, vertical type, 4 lever size 65 mm complete all as specified and directed.

S&F Hollow PVC wall panelling,super strong quality single side prelaminated with flat or fancy patterned on laminated side, incl PVC 'L'and U section for finishing of corners and ends etc inclusive of fixing with screw or with solvent cement required at site on walls, including dismantling old panelling /lining etc complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/ slabs/ blankets , any thickness, including cover fillets complete all as specified and directed.

S&F Anodised aluminium snap grid of size 605mmX605mm frame work for false ceiling all as specified including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

Supply & fixing Exposed metal frame ceiling with calcium silicate board 6mm thick of siliceous and calcareous material reinforced with cellulose fibre or E-ceiling or similar material Board for fixing in 600mm x 600mm grid complete all as specified and directed. Note : Frame work for ceiling shall be measured and paid separately.

Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions joint with tap, including 1.5mm thick (average thickness) putty and over a two coat of oil bound distemper complete all as specified and directed.

Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including complete all as specified and directed.

Removing all disintregated and loose concrete of any thickness including plaster if any in RCC Column, Chajjas, Slabs, Beams, Lintels etc, removing all loose rust/scale from exposed reinforcement bars by using wire brushes and sand paper including cleaning of exposed surfaces of reinforcement with protective anti corrosive epoxy bonding chemical (Mate Pidilite) and tide reinforcement bars/IRC fabric 50mm x 50mm x 12 gauge if reqd to reinforcement concrete primer to exposed surfaces and applying cement mortar 1: 3:4 with MPC (one part cement 3 part sand : 4 part 6mm coarse aggregate) and average thickness note less than 20mm including IRC 50mm x50mm)x 12mm gauge or reinforcement bars in the removing debris complete all as specified and directed. Note : Upto the height of 3(Three) storey building including necessary scafolding to execute the work and IRC 50mmx50mmx12 guage or reinforcement bars shall be paid separatly.

Supply only IRC 50m x 50mm x 12 guage welded mesh complete all as specified and directed.

PRINCE CONSTRUCTION (BID ID -3079726)

OM CONSTRUCTION CO. (BID ID -3094122)

M/S D.N Choudhary (BID ID -3094491)

Shiva Constructin Co. (BID ID -3092510)

moti construction company (BID ID -3086819)

Siya constructions (BID ID -3081574)

SHRI HARI BUILDERS (BID ID -3087910)