REPAIRS TO COMPOUND WALL PROTECTIVE WORK GI PARKING SHED INCLUDING CONNECTED WORKS UNDER AGE B R I AT GE DSSC WELLINGTON

Amount

Demolition of brick or stone/ boulder masonary, built in cement mortar complete as all specified and directed.

Demolition of un-reinforced cement concrete in ground floors not exceeding 15 cm thickness including floor finish complete as all specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed.

Add to item 03 for each additional 1.5m or part thereof in depth beyond the first 1.5 m complete all as specified and directed.

Removing excavated soils exc. 250 m and n.exc.500 m depositing where directed at a level n. exc. 1.5 m above starting point complete as all specified and directed..

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

M&L for Plain Cement Concrete Type 1:3:6 type C-2 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M&L Precast cement concrete type C1 1:3:6 (Using 20 mm graded aggregate) block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:6 complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. all as specified and as directed

Rendering 15mm thick CM of 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement as all specified and directed

Rendering 15mm thick CM of 1:4 on o on stone masonry surfaces or surface other than fair face of brick-work without using extra cement as all specified and directed

M&L Preparing new surfaces on external walls and applying two coats of Cement base paint complete all as per manufacturer instruction complete as all specified and directed.

M&L Stone walling of random rubble un coursed well bonded bedded and solidly hearted built in cm 1:6 and pointed the dressed surface with same mortar as the work process complete as all specified and directed.

Extra over stone walling for Granite or Trap stone for Hammer dressing to faces stones and dressing of face of beds and joints as specified of random rubble walling un coursed or brought up to course with maximum depression on face straight edge held against the dressing surface not exc 40mm complete as all specified and directed.

M&L for keyed pointing to random or polygonal rubble uncoursed or brought upto courses in CM (1:4) complete all as specified and directed.

M&L for PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in coping, benching, in lintels upto 1.5m clear span, cills, steps; plinth courses, parapets and railings upto 60 cm in height, including weathering, slightly rounded or chamfered angles and throating complete as all specified and directed.

Excavating over areas, n.exc 1.5 m deep and getting out in hard/dense soil complete all as specified and directed.

M&L for broken stone or boulders hardcore of gauge n. exc. 63 mm , deposited, spread and levelled in layers n. exc. 15 cm thick, watered and rammed to a true surface complete as all specified and directed.

M&L PCC 1:4:8 type D 2 (40 mm graded stone aggregate) 75mm thick as in sub base complete as all specified and directed.

M&L PCC 1:2:4 type B 1 (20 mm graded stone aggregate) upto 40 mm thick as in sub base complete all as specified

M&L Cement concrete tiles 20cm x 20cm x20mm thick, machine pressed with grey cement and pigment; set, jointed and pointed in net cement slurry in floors, and cut and polished including 20mm thick screed bed in CM 1:4 complete as all specified and directed. Make : Niligiri pavers

M&L Sand filling of from 50mm to 75mm in footpaths to courtyards including watering and consolidation complete as all specified and directed.

M&L Machine pressed precast concrete interlocking paver block with grey cement and no pigment any shape and size of confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete as all specified and directed.

Providing and laying or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required ling, level and curvature, jointed with CM 1:3 incl making joints with or without grooves incl making drainage Opening complete as all specified and directed.

M&L for petty repairs to plaster, floor, plinth etc and like in cement mortar 1:4 incluidng preparation roughing and cleaning the surface, making good, finishing even and smooth without using extra cement in patches area not exc 0.50 sqm each patch complete as all specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete as all specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise described complete as all specified and directed.

S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing, including distance pieces (Fe 410 -W (Gde E-250 ) Quality -A) complete as all specified and directed.

M&L for Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete as all specified and directed.

M&L for Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall/ berge board etc, fixed with self tapping screws complete as all specified and directed.

S & F in Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to FE 410-W(Gde -E-250) quality-A complete all as specified and as directed.

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L for preparing new steel surfaces and applying two coat of synthetic enamel paint over a coat of red oxide primer on steel surfaces of any description over 10 cm width or girth incluidng necessary preparation of surface complete as all specified and directed.

M&L Extra for forming fair finished drain or channel of 30cm inner girth in cement concrete using extra cement including forms moulds etc complete as all specified and directed.

Demolition and breaking up drain pipes 300 mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete as all specified and directed.

M&L for Reinforced concrete pipes 300 mm dia, class NP2, laid and jointed complete with collars all as specified and directed.

All as above item 36 but 600 mm dia complete all as specified and directed.

M&L for Concrete bed to 300 mm dia drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested; in cemet concrete 1:3:6 type C2 complete all as specified and directed.

M&L for Concrete bed to 600 mm dia drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested; in cemet concrete 1:3:6 type C2 complete all as specified and directed.

Demolition of reinforced cement Concrete of any description and in any position not otherwise specifically provided for such as RCC post, manholes, landings etc (reinforcement to be cut as required to facilitate demolition) complete as all specified and directed.

M&Lfor Precast cement concrete 1:2:4 type B1 Using 20 mm graded aggregate as landings in cover slab (for manholes etc.) and similar work including necessary form work and set in mortar 1:6 complete all as specified and directed. Note :- Reinforcement shall be measured and paid separately

M&L for RCC using B-1 1:2:4 (20mm graded stone aggregate) Slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L RCC using B-1 1:2:4 (20mm graded stone aggregate) as in chajjas complete all as specified and directed.

M&L for use and waste of timber as in formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillarstress, buttresses rtc.,vertical or to batter for fair finished surfaces of concrete fla complete as all specified and directed.

M&L for Mild steel bars TMT 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete as all specified and directed. .

All as item no.45 above but 6 mm dia & over upto and including 10mm dia in stirups, spacers and binders

S&F of Fibre Glass Reinforced plastic manhole cover slabs made of thermoset polyester resin high in compressive, tensile and flexural strength with a load bearing capacity of 2.50 ton to 5.00 ton complete all as specified and directed.

Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each (without taking frames) complete as all specified and directed.

Taking down Shutters of any description exc 2 sq. m (without taking frames) as all specified and directed

Taking down chowkhats or frame n.exc 1.5 Sqm each with shutters (without taking off shutters from frame). complete as all specified and directed.

Taking down chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each (without taking off shutters from frame) complete as all specified and directed..

Supply & Fixing 2nd class hard wood plain solid ,straight chowkhats and frames wrought framed, rebated on the solid rounded or chamfered put together with glue pinned at joints complete as all specified and directed.

S&F for 40 mm thick Flush shutters particle board core construction, with block Board Core and plywood face panels covered with decorative Face Veneer with lipping/ frame on one faces , complete all as specified and as directed.

Glazed and skeleton shutters, of second class hard wood of thickness 35 mm open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); all as specified and as directed.

M&L Plain, framed, panelled shutters using second class hard wood of 40mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats all as specified and as directed.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staplesall as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete as all specified and directed.

Supply & Fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete as all specified and directed.

Supply & Fixing MS work as in hold fast etc conforming (Fe-290 Gde-165) complete as all specified and directed.

M&L for tarring back of chowkat, area tarred exc 0.10 sqm but n.exc 0.5 sqm each complete as all specified and directed.

All as per item No : 6 here in before but treating small articles such as hold fast etc tarred area n. exc 0.10 sqm each complete as all specified and directed.

M&L two coats of synthetic enamel paint over a coat of pink primer to newly untreated wooden surface including preparation of new surface exc 10 cm width or girth all as specified and as directed.

Supply & Fixing MS Butt hinges medium weight cold rolled & fixed 125 mm long all as specified and as directed.

Supply & Fixing in aluminum anodized barrel tower bolts of extruded section 150 mm long all as specified and as directed.

Supply & Fixing aluminum handles, cast type, anodised extruded section 150 mm long all as specified and as directed.

S&F Aluminium alloy anodised sliding door 300mm size bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed size 300mm long complete as all specified and directed.

M&L for Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) (A) Area not exceeding 2.00 sqm each complete as all specified and directed.

Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) (A) Area exceeding 2.00 sqm each complete as all specified and directed.

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension,EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixinghardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & complete as all specified and directed.. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

M&L for Sheet glass 4.0mm thick, ordinary quality and glazing with oil putty in square n.exc 0.5 sq. m in each pane all as directed and specified.

M&L for Sheet glass 4.0mm thick, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane all as directed and specified.

M&L for Sheet glass 4.8mm thick, ordinary quality and glazing with oil putty in square n.exc 0.5 sq. m pane in each all as directed and specified.

M&L for Sheet glass 4.8mm thick, ordinary quality and glazing with oil putty in square exc 0.5 sq. m pane in each all as directed and specified.

M&L for Toughned glass 15mm as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required all as directed and specified.

Excavating in post holes each n.exc 0.50 cum getting out hard dence soil including returning filling in and ramming earth or broken rubble mixed with earth around ,in layers n.exc 25 cm ,watering and removing surplus soil to a distance n.exc 50 mtr and making good surface complete all as specified and as directed.

M&L for PCC 1:3:6 type C2 using 40 mm graded stone aggregate in foundations,filling and mass concrete all as specified and directed

S&F mild steel sections of any description conforming to grade E 165 fixed as in posts and struts in fencing, including flat iron fillets for security wire mesh etc with all necessary drilling holes, bolting or revetting etc. complete all as specified and as directed

Supply only MS round bars conforming to Grade E-250 quality A , 10 mm dia cut to length bent to shape required and fixing as directed in fencing complete all as specified and directed. Note : Fixing includes in chain link fixation

Supply only chain link MS galvanised fencing, 50x50 mm mesh or as specified of 3.8mm dia or more wire including line wires as approved and complete as all specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and ttype to any type of standard, rails straining bolts etc including provision binding wire complete all as specified and directed.

S&F mild steel screw bolts n exc 5 cm long of 11 mm to 15 mm diameter (machine made) with hexagonal or square heads at one screwed the other each screwed end to be fitted with washers and one hexaganal or square nut complete all as specified and directed

S&F for galvanized two strand,steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing any type of standard rail straining bolts including securing or tying at crossing with and provision of galvanized MS steel wire with staples or steel pins all as specified and as directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. Note :1. Rates shall be quoted with required scafolding for a height upto 10 meter buildings inclusive of working of Item No. 01 hereinbefore.

M&L for preparation of old treated/ untreated stone/ brick wall surfaces and applying one coats of Exterior Emulsion Paint ( Anti Fungal) white or tinted complete all as specified and as directed. Note :1. Rates shall be quoted with required scafolding for a height upto 10 meter buildings.

M&L for preparation of new plastered surfaces and applying two coats of Oil Bound Distemper over one coat of primer on wall complete all as specified and directed.

M&L for preparation of old plastered surfaces and applying one coat of Oil Bound Distemper over one coat of primer on wall complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of Oil Bound Distemper over coat of primer on ceiling complete all as specified and directed.

M&L for preparation of old plastered surfaces and applying one coat of Oil Bound Distemper over one coat of primer on ceiling complete all as specified and directed.

M&L for 3mm thick wall care putty on wall complete all as specified and directed.

M&L for 3mm thick wall care putty on ceiling complete all as specified and directed.

S&F in repair 75 mm dia PVC floor trap with cockroach trap and grating (double bowl type) of size 150 x 150 mm with hole for waste pipe in grating including jointing to waste pipe complete all as specified and as directed. Make:Prayag Cat No:119

Labour only for making hole in granite and RCC slab for gas connection pipe as required dia including necessary mechinary complete all as specifies and as directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specifies and as directed.

M&L PCC 1:2:4 type B 1 (20 mm graded stone aggregate) 40 mm thick as in sub base/floor etc complete all as specified

M&L for granite of any type tile 20 mm thick machine cut bedded and jointed with grey cement slurry & pointed with white cement to match the shades of granite stone including grading and polishing type with and including 15 mm thick screed in cement mortar 1:6 complete all as specified and as directed.

Taking down and refixing of shutters in the same opening of any description n exc 1 sq. m each complete as all specified and directed.

Taking down and refixing of shutters in the same opening of any description exc 1 sq. m and n. exc 2.00 each complete as all specified and directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with screed bed 15mm thick of CM 1:6 complete all as specified and as directed.

S&F PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing

S&F Anodised aluminium snap grid of size 605mm x 605mm frame work for false ceiling all as specified and as directed

Dismantling wall and ceiling board fibre pulp insulation etc or insulation boards/ slabs blankets any thickness, including cover fillets/ frame all as specified and directed.

M&L for Welding in repairs n. exc 2.5cm in length N exc 6mm all as specified and directed.

Dismantling of boarding, any descreption, fixed in any position with nails all as specified and directed

S&F 18/19mm thick Particle board, exterior grade prelaminated both sides with decorative choice lamination, fixed with nails/ screw screws to timber frame work including liping work teak wood beading 6mm thick comple all as specified and directed

S&F Continuous (Piano) hinges SS, bright finish width of flaps 40mm complete all as specified and as directed

Supply and fix in repairs Magnetic closer of suitable size for kitchen/bedroom cupboards fixed with screws complete all as specified and directed.

Supply and fix in repairs stainless steel telescopic ball bearing channel, zinc plated finish for drawer including necessary fittings up to length of 600mm fixed with screws complete all as specified and directed.

S&F brass knobs 35-40mm dia complete all as specified and directed

sree devi construction (BID ID -3445396)

shree jayam enterprises (BID ID -3445459)

LAKSHMI ELECTRICAL ENTERPRISES (BID ID -3445490)

VVM CONSTRUCTIONS (BID ID -3446320)

GUNASEKARAN AND CO (BID ID -3445182)

m/s prabakaran (BID ID -3445841)

VENKATESH (BID ID -3446241)