REPAIR/ MAINT OF JOINERY AND OTHER B/R SERVICES IN TECH AREA AT AF STN JAISALMER

Amount

Taking down chowkhat with shutter (without taking off shutter from the frame) n. exc 1.5 sqm complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and directed.

S&F for Framed work as in doors or gates of angle or other sectionwith gusset plates,rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooksn and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-410 W (Gde E-250 Quality B) complete all as specified and directed.

S&F for 30mm thick flush shutters factory made solid core construction with block boards core and plywood face panels, commercial type on both sides (ISI marked) fixed to chowkhats complete all as specified and directed.

S&F for wood grain printed 1mm PVC sheet fixed or laid on to flush doors by using rubber based adhesive, supplying & fixing at site as per specification complete all as specified and directed.

S&F for Factory made Second class hard wood 30mm thick gauzed and skeleton door shutters, divided into squares with plain chamfered or rounded, mitred and rebated sash bars fitted with cut and mitred beads for securing wire cloth any number complete all as specified and directed.

Supply and fixing for wire cloth 0.56mm nominal dia of wire and avg width of aperture 1.18mm complete all as specified and directed.

Ditto but fixed in repair - ditto - complete all as specified and directed.

S&F for anodised aluminium extruded sections as in frame for doors, windows, ventillators, partions including joining cleat for fixing etc complete all as directed.

S&F for anodised aluminium sections for door shulters (aluminium sections weighing 0.55 Kg/m) including necessary joining cleats, glazing clips, rubber neoprane packing, extruded anodised aluminium handle 2 Nos in each door shutter and 04 Nos hinges each shutter complete all as specified and directed.

S&F for anodised aluminium extruded sections as in window and ventillator shutters, side hung type without sash bars ( aluminium sections weighing 0.55 Kg/m) including necessary joining cleats, glazing clips, rubber packing and anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (01 No each shutter) extruded anodised aluminium alloy with galvanised mild steel hinge pin 100mm long (03 Nos each shutter) extruded enodised aluminium handle suitable type (01 No each shutter) complete all as specified and directed.

S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet rainforced with MS square tube 19mmx19mmx19 gauge & PDM rubber gasket wealther seal to be provided through out the frame. The profile shall be mitre cut at two corners and jointed by inserting 02 Nos of 150mm long brackets of 15mmx15mmx15 guage MS square tube inside the 19mmx15mm MS square tube and suitably screwed complete all as specified and directed.

S&F for factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes 19mmx19mmx19gauge for stiles & 15mmx15mmx19 gauge for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side & as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading & joined together with solvent cement etc complete all as specified and directed.

S&F for MS hold fast and similar article conforming to Fe-290 Gde-E-165-0 or Fe-310-0 complete all as specified and directed.

S&F for 100 mm long medium weight, cold rolled mild steel Butt hinges complete all as specified and directed.

S&F for (aluminium extruded section body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F for aluminium alloy, anodised, 250mm sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded msections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F for aluminum anodized barrel tower bolt of extruded section size of bolt 100mm complete all as specified and directed.

S&F for aluminum handle cast type anodized 125mm size complete all as specified and directed.

S&F for floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor of 150 mm length complete all as specified and directed.

S&F for 4mm thick figured glass pin head type and glazing with oil putty or aluminium beads and rubber in squares n. exc 0.50 Sqmtr each pane complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for 3mm thick sheet glass ordinary quality and glazing with oil putty or aluminium beads in square not exc 0.50 sqm in each pane, complete all as specified and directed.

M&L for preparation of new steel surface of any description over 10 cm in width or girth not other wise described and applying two coat of synthetic enemal paint over one coat of red oxide primer complete all as specified and directed.

M&L for preparation of new wood surface of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enemal paint over a coat of pink primer complete all as specified and directed .

Welding in repairs n. exc 2.5cm in length thickness of metal n.exc 6 mm complete all as specified and directed.

Easing and adjusting of steel door/ window/ventilators incl removing rusted and forging materials and replacing broken hinges including welding and all labour complete all as specified and directed.

Easing and adjusting of wooden door/ windows complete all as specified and directed.

Easing and adjusting of aluminium door/window including necessary joining cleats, glazing clips, rubber packing and anodised aluminium snap beading, screws, anodised aluminium fittings fixing aluminium bedding, rubber beding removing rusted and forging materials and replacing broken hinges including fixing necessary aluminium flat and aluminium angle complete all as specified and directed.

S&F in repairs (aluminium extruded section body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F in repairs plain aluminium sheet 0.56mm thick fixed with screw complete all as specified and directed.

Demolition of Brick work of stone/boulder masonry, built in cement mortar excluding ashlars facing dressed stone work and pre-cast concrete complete all as specified and directed.

M&L for square rubble walling Jodhpur type brought up to courses well bonded, bedded and solidly hearted in cement morgtar 1:6 complete all as specified and directed.

M&L for precast cement concrete (1:3:6) type C1 (20mm graded stone aggregate) solid block masonary exc 10 cm in width and set in CM (1:6) complete all as specified and directed.

M&L for rendering 10mm thick on concrete surfaces of any description in cement mortar (1:6) is to be finished even and smooth (without using extra lime or cement) complete all as specified and directed.

M&L for preparation of newly plastered of wall surfaces and applying two coat of oil emulsion distemper over a coat of cement primer as approved complete all as specified and directed.

M&L for PCC (1:3:6) TYPE C1 (using 20mm graded stone aggregate) as in coping and other similar bands incl weathering, slightly rounded or chamfered, angles and waste of form work throating as directed incl necessary form work complete all as specified and directed.

Hammer dressing to face stones with maximum depression on face from a straight edge n exc 20 mm and dressing face beds and joints as specified to rubble walling Jodhpur Type brought up to squared course complete all as specified and directed.

M&L for Key pointing to squared rubble masonry brought upto courses in CM (1:4) complete all as specified and directed.

Dismantling floor, hearth or wall tiling or stone partitions including cement mortar bedding (but not backing) and rubbish off the debris from premises complete all as specified and directed.

M&L for Glazed coloured ceramic tiles in dado/skirting 300mmx450mmx6-7mm / 350mm x250mm x6-7mm thick on vertical surfaces, dado and skirting over and including 15mm thick cement and sand mortar (1:4) backing coat set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tile complete all as specified and directed.

M&L for Non Skid coloured ceramic tiles 7-8mm thick (square or rectingular)area of each tile 400 x 400 mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 etc complete all as specified and directed.

M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm as in floors etc over 15mm thick in cement and mortar (1:6) bedding set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M&L for 20mm thick black granite slabs/Tiles laid in floors/treads over 15mm thick screed bed in CM (1:6), set and jointed in neat cement slurry and pointed in white cement with admixture of pigment to match the shade of granite complete all as specified and directed.

M&L for 20mm thick black granite slabs/Tiles laid in Wall surfaceover 15mm thick rendering in CM (1:6), set and jointed in neat cement slurry and pointed in white cement with admixture of pigment to match the shade of granite complete all as specified and directed.

Beenu Co. Company (BID ID -3140303)

deepaktraders (BID ID -3087082)