Upgradation of GNM Training School to B Sc Nursing College, Churachandpur.

Amount

EARTH WORKS

Earthwork in excavation in foundation trenches or drains including dressing of sides & ramming of bottoms lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 mts.

Loose/ soft soil

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers notexceeding 20 cm in depth, solidating each deposited layer by ramming and watering lead upto 50 metres lift upto 1.5 metre

Filling in plinth with sandy soil under floors including watering raming consolidating & dressing complete

- CONCRETE WORKS

Providing and laying cement concrete in foundation and plinth excluding the cost of centering and shuttering in

1:4:8 (1 cement:4 coarse sand: 8 graded stone aggregate 40 mm nominal size)

R.C.C WORKS

Providing and Laying RCC work in position specified grade of reinforced cement concrete, excluding the cost of centering,shuttering,finishing and reinforcement.All work upto plinth level in

a)1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sill, staircases and spiral staircase upto floor five level but excluding cost of centering, shuttering and reinforcement.

b)1:1.5:3(1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size).

Reinforced cement concrete work in walls (any thickness) i/e attached pilaster buttresses plinth & string courses fillets, columns, pillars, piers, abutments, posts and struts etc upto floor five lvl excluding the cost of centering shuttering finishing and reinforcement in

a)1:1.5:3(1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size).

Reinforcement of RCC work including bending, binding, & placing in position complete.

Thermo-Mecanical treated bars

FORM WORK

Providing form works i/c centering and shuttering so as to give a rough finish, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 m and removal of the same for in-situ reinforced concrete and plain concrete work in : [Using 12 mm shuttering ply]

i) Foundation, footings, bases of columns etc. and mass concrete.

ii) ( i)sides and soffits of beams, beam haunchings, cantilevers, girders, bressumers and lintels not exceeding 1 m in depth.

iii) Columns, pillars, posts and struts(square, rectangular or polygonal in plan

(iv) Flat surface such as suspended floor, roofs landings and the like floors etc. upto 200 mm in thickness.

(d) Stair cases wit sloping or stepped soffits i/c risers and stringers excluding landing

- BRICK WORKS

2nd class (local first class) brick work in foundation and plinth in cement mortar 1:4(1 cement:4 fine sand)

Half brick masonary 2nd class (local 1st class) in cement mortar 1:3 (1 cement : 3 coarse sand) in superstructure.

- WOOD WORK

Providing wood works in frames of door, windows clerestory windows & other frames, wrought frame & fixed in position. With hold fast lugs or with dash fastener of required diameter and length ( hold fast lugs or dash fastener shall be paid seperately.

Local best quality Uningthou

Providing and fixing 35mm. thick panelled ,glazed or panelled and glazed shutters for doors ,windows and clerestory windows i/c bright finished brass hinges ( with Heavy Type) with necessary screws.

a)Local best quality Uningthou wood.

P/F M.S. fan clamps type-I of 16mm dia. and M.S.bar bent to shape during laying i/c hooked ends in RCC slab during laying i/c painting the exposed portion of loop all per std. design complete.

Providing and fixing M.S Sliding bolts bright finished or/and black enamelled with nuts and screws etc.complete .

Providing and fixing MS Tower bolts (barrel type) with screws etc. complete

Providing & fixing brass. handles with necessary screws screws etc.complete.

Providing and fixing MS Tee Hinges Bright finished or / and B;ack enamelled with necessary screws etc. complete.

i) 300x 115x 2.24mm

Providing and fixing 75 x 60 mm moulded hand rail in straight lengths complete in Uningthou wood.

Providing & fixing 75 mm x 60 mm Uningthou caps turned to match the hand rails & mitred in i/c/hand rail screws & dowels (dia of cap to be twice the width of the hand rail 75 mm x 60 mm)

Providing & fixing 75 mm x 60 mm Uningthou wood scrolls made to suit the moulded hand rails (dia of scrolls to be three times the width of the hand rail 75 mm x 60 mm)

Providing & fixing 25 mm x 25 mm Uningthou wood balusters 25 mm x 25 mm square, wrought fixed with ends housed (square or splay) to hand rails & treads or strings complete.

Aluminium glazed windows and ventilators of standard aluminium extrusion section joints mitred and riveted/screwed with 15x3 mm lugs 10 cm long with steel plugs embedded in cement concrete block 15x10x10 cm of 1:3:6 (1 cement:3 coarse sand:6 stone aggregate 20 mm nominal size) or wooden plugs and screws of rawl plugs and screws or with fixing clips with bolts and nuts as required including providing and fixing of glass panes 4 mm thick, projecting hinge, handles, peg stays, bolting devices, locking arrangements, spring catch & aluminium clip beading etc as required complete.

Ready made aluminium windows (fixed)

Providing wood work in frame of false ceiling, partition etc sawn & put up in position.a) Leihao Wood

Providing & fixing 12 mm thick fiber insulating board lining with butt, jointing & nails complete (frame work & cover files to be measured & paid separately).

Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a coat of approved steel primer red oxide zinc chrome primer conforming to IS:2079) welded and bolted including special shape washer etc. complete. (a) Electric resistant welded tube (Conforming to IS:1611-1979)

Dyna brand pre-painted profile sheet roofing fix with self drilling & self tapping screws of 68mm long Xylan coated conforming to AS3566, 1000h SSt fitted with EPDM washers & PVC caps complete, excluding the coat of purlins, rafter & trusses (a) 0.50mm thick consider a shed of 60' X 30' ( externals dimensions at plinth) area of roffing= 61X32.50 = 1982.50 sft = 184.27 Sqm. a) Pre painted Galvalune sheets (PPGL)

Profile sheet 0.50mm/4.2kgs/Sqm

Trapezoidal Pre-painted profile sheet for ridges gutter or valley 610mm wide of approved brand DYNA roof or equivalent with self drilling screws of 68 mm long Xylon coated screws with PVC washer & caps complete, excluding the coat of purlins and trusses. a) Pre painted Galvalune sheets (PPGL)

Profile sheet 0.50mm/4.2kgs/Sqm

50 mm cement concrete flooring 1:2:4 (1 cement: 2 coarse sand:4 stone aggregate 20 mm & down gauge) finished with a floating coat of neat cement.

20 mm thick cement plaster skirting (upto 30cm height) with cement mortar 1:3 (1 cement:3 coarse sand ) finished with a floating coat of neat cement i/c. rounding of junctions with floors.

15mm cement plaster1:4 ! Cement: 4 fine sand )

12mm cement plaster1:4 ! Cement: 4 fine sand )

Applying one coat of cement primer of approved quality on wall surface.

Finishing walls with water proofing cement paint of approved quality on new work ( Two or more coats) to give shade.

Distermpering (two or more coats) with oil bound washable distemper of approved quality on new work i/c priming coat to give an even shade.

Applying ready mixed priming coat pink primer of approved quality on wood work.

Painting two or more coat (excluding priming coat) with superior ready mixed paint of wood work of approved quality in all shade on new work to give an even shade

Providing plinth protection with bricks 3rd class (local mixed class) in cement mortar 1:6 (1 cement: 6 fine sand) i/c pointing top surface of bricks with cement mortar 1:2 (1 cement:2 sand).

Sanitary & Water supply

Providing and fixing 100 mm soil, waste & vent pipes.

Providing and fixing 50 mm HCI soil, waste & vent pipes.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:

1.1 ) W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :

One urinal basin with 5 litre white P.V.C. automatic flushing cistern

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:

a) White Vitreous China Flat back wash basin size 550x 400 mm with single 15mm C.P. brass pillar tap

b) White Vitreous China Angle back wash basin size 600 x 480 mm with single 15mm C.P. brass pillar tap

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets, 15 mm CP brass pillar taps and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required

Kitchen sink with drain board

510x1040 mm bowl depth 178 mm

Providing and fixing Toilet papper holder

Providing and fixing MS holder bat clamps of approved design to 100 mm HCI pipe socket i/c cost of cutting holes and making good the walls etc.

Providing and fixing GI pipes complete with GI fittings i/c trenching and refilling etc. (external work).

a) 15mm dia

b) 25mm dia

c) 50mm dia

Making connection of GI Distribution branc with GI Main 25mm to 40 mm diameter by providing and fixing tee, including cutting and threading pipe etc. complete .

Providing and fixing brass stop cock of approved quality

a) 50mm dia

b) 25mm dia

c) 15mm dia

Providing and fixing 610 x 20 mm Diplomat brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screws

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing soap container of glass with C.P. lid and brackets fixed to wooden cleats with C.P. brass screws.

Providing and fixing grating of approve quality for nahni trap. Sainless Steel.

125mm nominal diameter with 25mm waste hole.

Providing and fixing Water Storage Tanks with 400 mm diameter nominal base G.I. overflow tube 25 mm nominal G.I. inlet and 15 mm nominal G.I. outlet tube i/c hoisting a height of 10 m above ground level

a) 2000 litres net capacity storage tanks

I.E.I .Works

Sub-Head -I (Wiring)

Wiring for light point / fan point/Exhaush Fan point /call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable inPVC casing and capping with modular type switch,modular plate size, G.I. box and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc as required.

Group C

Wiring for light point /power point plug with 2x4 sq.mm FR PVC insulated copper conductor single core cable in PVC casing & capping along with 1 N0. 4.sq.mm FR PVC insulated copper conductor single core cable for loop earting etc as required.

Wiring for circuit / sub main wiring alongwith earth wire with following size of FR PVC insulated copper conductor, single core cable in surface /recessed steel conduit as required.

a) 2X1.5.mm² +1x1.5mm² earth wire

b) 2X2.5.mm² +1x2.5mm² earth wire

c) 4X4.mm² +2x4mm² earth wire

Sub- Head-II

( Fittings & Accessories)

S/F Vertical down lighters with CFL 1x10/13 white powder coated CRCA ring, bright finished reflector i/c connection etc. (ref. 538536 BJDR 110/113 WEB/VI, D type CFL 1x10/13 W).

Supplying, installation testing and commissiong of ceiling fan, capacitor type suitable for low voltage operation including wiring the down rods of standard length (upto 30 cm ) with 1.5 sq.mmFR PVC insulated, copper conductor, single core cable including providing and fixing phenolic laminated sheet cover on the fan box etc. as required. (ISI marked approved)

a) 1200 mm sweep

Supplying, Installation of exhaust fan upto 305 mm sweep in the opening, including marking the holes to suit the size of above fan, making good the damage, connection, testing, commissioning etc. as required.

S/F 1.5 tone capacity split type Air conditioner(Diamond, 3 star , 5G 30, G-SC 18 FD 3 WJH) complete with indo voltage stabilizer Automatic 4 KVA( 140-280 for 1 ton).

Sub- Head- III

(DB,s & MCB,s)

Supplying and fixing following way, single pole and neutral ( SPN) , sheet steel, MCB disbutribution board ,240 Volts on surface / recess, neutral bus bar, earth bar, din interconnection,s phosphatized and power paintted including earthing etc. as required.( But without MCB/RCCB /Isolator).

a)10 way (2+10 way) Single Door

S/F "B" series,SP MCB. Supplying and fixing following 5 amps to 32 amps rating 240 Volts, B series, miniture circuit breaker suitable for lighting and other load of following poles in the existing MCB DB complete with connection, testing and commissioning etc as required.

a) Single Pole and neutral.

S/F DP MCB isolator : Supplying and fixing following rating, double pole,240 volts, isolator in the existing MCB DB complete with connection,testing and commissioning etc. as required.

b)63 amps.

Sub-Head - IV

( Earthing )

Earthing with Copper earth plate 600mmx600mmx6mm thick i/c accessories, and providing masonary encloure with cover plate having locking arrangement and watering pipe etc.(but without charcoal or coke and salt ) as required.

Providing and fixing 8 SWG dai G wire on surface of in surface or in recess for loop earthing along with existing surface/recessed conduit/submain wiring /cable,as required.

Sub- Head- V

Switch Gear (Main Switch) Change Over

P/F 125 amp. TPN stand ground on load change over switch (Compact design) 415/500 V including connection etc as reqd.

Elsalin Kamei

M/S PAMESHOR ENTERPRISES