SPECIAL REPAIRS TO 04 TOILETS, PROVISION OF 01 TOILET, DRAINAGE, JAFFRI WALL AND OUT DOOR GARDEN LIGHTS AT MIL STATION JAISALMER

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m all kind of soil complete all as directed by Engineer-in-charge.

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc not exceeding 10 Sqm on plan and getting out in soft/ disintegrated rock complete all as specified & directed by Engineer-in-Charge.

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in hard/dense soil complete all as specified & directed by Engineer-in-Charge.

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified & directed by Engineer-in-Charge.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil all as specified & directed by Engineer-in-Charge.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soft/ disintegrated rock complete all as specified & directed by Engineer-in-Charge.

Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified & directed by Engineer-in-Charge.

Removing excavated soft/ disintegrated rock to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified & directed by Engineer-in-Charge.

M&L for plain cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete all as specified & directed by Engineer-in-charge.

M&L moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as directed by Engineer-in-charge.

M & L for hardcore of gauge not exceeding 63 mm of broken granite stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified & directed by Engineer-in-charge.

M&L for 75 mm thick plain cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in sub base of flooring finished the surface even & fair without using extra cement complete all as specified & directed by Engineer-in-charge.

M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified & directed.

Extra over stone walling for hammer dressing to face stones with maximum depression on face from a straight edge not exceeding 20mm & dressing face beds and joints as specified to squared rubble walling Jodhpur type brought up to courses all as specified & directed.

M&L for keyed pointing in cement mortar (1:4) to squared rubble masonry, Jodhpur type, coursed or un coursed all as specified & directed by Engineer-in-charge.

M&L for precast cement concrete (1:3:6) type C-1 (using 20mm graded stone aggregate) as in block masonry with solid blocks exceeding 10cm width and setting in cement mortar (1:6) complete all as specified & directed by Engineer-in-Charge.

M&L preparation of new plastered surfaces and applying three coats of white wash on wall surfaces complete all as specified and directed by Engineer-in-charge.

M&L Jodhpur stone roof slabs, self faced 7.5cm to 10cm thick, 25cm to 35cm wide, hoisted and set, jointed and grouted in cement lime (1:3) or cement mortar (1:6) complete all as specified & directed by Engineer-in-charge.

M&L for plain cement concrete (1:2:4) type B0 (using 12.5 mm graded stone aggregate) for levelling course for consolidated thickness shall be varied from 60 to 85 mm as per the requirements all as specified & directed by Engineer-in-charge.

Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner complete all as specified & directed by Engineer-in-charge.

M&L for non skid ceramic coloured tiles of size 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, as in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified & directed by Engineer-in-charge.

S&F glazed ceramic coloured tiles of size 450mmx300mm x7-8mm thick on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick backing coat in CM (1:4) complete all as specified and directed by Engineer-in-charge.

S&F butt hinges medium weight, 100mm long made of stainless steel complete all as directed by Engineer-in-charge.

S&F 125 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified & directed by Engineer-in-charge.

S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified & directed by Engineer-in-charge.

S&F steel ventilators with top hung shutters incl hinges, steel peg stay complete all as specified & directed by Engineer-in-charge.

M&L for roughly squared stone 5 cm thick and not exceeding 3m length, lintels hammer dressed on face and soffits, hoisted, set and pointed in cement mortar (1:6) complete all as specified & directed by Engineer-in-charge.

S&F 5 cm thick sand stone slabs Jaisalmer pattern/colour in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc not exceeding 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar (1:4) complete all as specified & directed by Engineer-in-charge.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10cm girth complete all as specified & directed by Engineer-in-charge.

S&F gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for the 20mm sizes with ISI marked and as per IS 14846 all as specified and directed by the Engineer-in-Charge.

S&F gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for the 25mm sizes with ISI marked and as per IS 14846 all as specified and directed by the Engineer-in-Charge.

S&F 15mm bore stop cock, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions all as specified & directed.

S&F 15 mm bore stop valve, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for union complete all as specified & directed by Engineer-in-charge.

S&F 15 mm bore fancy type, bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified & directed by Engineer-in-charge.

S&F 15 mm bore, bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified & directed by Engineer-in-charge.

S&F Towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified & directed by Engineer-in-charge. Make :-Silver shine model no SSTR-501DX , Cera Cat Part No FS003103, Prayag -BA 20)

S& F Soap dish, size 160x160x90mm, fixed to plugs with chromium plated brass screws complete all as specified and directed by Engineer-in-charge.

S&F CP Shower rose 125mm size with swivel joint including fixing sted pipe for union complete all as specified and directed by Engineer-in-charge.

S&F pillar taps 15 mm bore cast copper alloy with capstan head chromium plated screwed down high pressure with or without 'Hot' & 'Cold' with long screwed shanks and fly nuts, screwed complete all as specified & directed by Engineer-in-charge. (Make :- Prayag Cat Part No.- 9202, Cera Cat Part no. -F 2006101,,Silver shine model no:-1065)

S&F Viterious china White Wash Hand Basin 450 x 300mm fixed including 32 mm brase CP waste fitting, PVC waste pipe 32 mm dia, 450mm long PVC connection 15mm dia complete all as specified and directed by Engineer-in-charge.

S&F 10 ltrs capacity PVC valve less, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of 32 mm dia & PVC connection 15mm size, 450 mm long with PTMT nuts complete all as specified & directed by Engineer-in-charge.

S & F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified & directed by Engineer-in-charge.

Cutting holes in to or through in brick or stone walls built in cement mortar and making good in CM (1:3) or cement concrete (1:2:4) type B1 (using 20 mm graded stone aggregate) as required, exc 150 sqcm & n. exc 400 sqcm complete all as specified & directed by Engineer-in-charge.

M&L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified & directed by Engineer-in-charge.

S&F PVC (SWR) pipes of 110 mm dia, single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed by Engineer-in-charge.

S&F 110mm bore PVC (SWR) vent cowl all as specified & directed by Engineer-in-charge.

S&F, 110 mm bore (SWR) PVC bends any radius complete as directed by Engr-in-Charge.

S&F 110 mm dia PVC (SWR) junction single, (single T) equal or unequal complete all as specified & directed by Engineer-in-charge.

M&L for plain cement concrete (1:3:6) type C-1 (using 20 mm graded stone aggregate) as in copings including weathering, slightly rounded or chamfered angles and throating including necessary use & waste of form work (straigth or curved) complete all as specified & directed.

M&L for cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in surface channels and drains etc like including necessary forms/ moulds complete all as specified & directed by Engineer-in-charge.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified & directed by Engineer-in-charge.

M&L for 200mm bore reinforced cement concrete pipes, class NP-2 laid in trenches jointed and pointed in cement mortar (1:1) with collars complete all as specified & directed by Engineer-in-charge.

M&L for reinforced cement concrete (1: 1½:5) type A-1 (using 20mm graded stone aggregate) as in slabs supported on walls complete all as specified & directed directed by Engineer-in-charge.

M&L for 65mm thick precast cement concrete (1:3:6) type C-0 (using 12.5mm graded stone aggregate) as in louvers or jallies (measured solid), including all mouldings but excluding frame, set in cement mortar (1:4) complete all as specified & directed by Engineer-in-charge.

M&L for precast cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate in window cills or door cills, lintels, bressumers, steps, quoin blocks, string courses, copings, knellers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bounders, corbels, brackets etc with plain fair faces, including chamfers, weatherings, throating etc and setting in CM (1:4) complete all as directed by Engineer-in-charge.

M&L for precast reinforced cement concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in water through and the like including weathering, slightly rounded or chamfered angles and throating including necessary use & waste of form work (straigth or curved) set in CM (1:4) complete all as specified & directed by Engineer-in-charge. Note :- (i) Work will be carried out for out door garden lights as per size and shape specified by Engineer-in-charge. (ii) Reinforcement will be measured and paid separately.

Taking down cement or cement lime plaster from stone walls etc including racking out joints hacking for key scrubbing down with water etc & removing rubbish out side MD land complete all as specified & directed by Engineer-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise complete all as specified and directed by Engineer-in-charge.

Demolition of cement concrete (un reinforced) in ground floors and pavings n.exc 15 cm thick (below or above ground level) & removing rubbish out side MD land all as directed by Engineer-in-charge.

M&L for non skid ceramic coloured tiles of size 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, as in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6.complete all as specified & directed by Engineer-in-charge.

M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in floors & finished the surface even & fair without using extra cement all as specified.

M&L for rendering 10 mm thick on concrete surface in cement mortar (1:6) & finished the surface even & fair without using extra cement all as specified.

M&L for rendering 15 mm thick in cement mortar (1:6) on stone masonry wall surfaces or surfaces other than fair faces of brick work or one side of lathing and finishing the surface even and smooth without using extra cement complete all as specified & directed by Engineer-in-charge.

M&L for rendering 15 mm thick in cement mortar (1:4) on stone masonry wall surfaces or surfaces other than fair faces of brick work or one side of lathing and finishing the surface even and smooth without using extra cement complete all as specified & directed by Engineer-in-charge.

M&L for rendering 5mm thick on fair faces of concrete surfaces in ceiling in CM( 1:3), finished even and smooth without using extra cement complete all as specified.

M&L for preparation of new plastered surfaces of walls and apply two coats of distempering oil emulsion over a coat of primer complete all as specified & directed by Engineer-in-charge.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified & directed by Engineer-in-charge.

M&L preparation of new plastered surfaces and applying three coats of white wash on ceiling surfaces complete all as specified and directed by Engineer-in-charge.

S&F flush pipe of polyethylene of low or high density of PVC 32mm dia for low level flushing cistern / WHB complete all as specified and directed by Engineer-in-charge.

S & F in repair Vitreous china wash down water closet pan (Pedestal pattern), white (EWC)with necessary P/S Trap and fixed in repairs including jet spray and seat cover complete all as specified and directed by Engineer-in-charge. (Make :- Cera Cat Part No-S1050104, hindware cat Part No-20011)

S&F in repair PVC low level white flushing cistern syphonic action type 10 ltrs capacity incl flush pipe 32 mm dia incl PVC connection 450 mm long complete all as specified and directed by Engineer-in-charge. (Make:-Cera Cat part No B1010102, Hindware (Sleek) , Commander(Water Bird)

S&F in repair 700 x 500 mm 5 mm thick glass mirror with double coat for protaction and longevity grounded edges for safety and siliver plating on the back for better reflection complete all as specified and directed by Engineer-in-charge. (Make:-Prayag Cat part No BLM-01,Cera Cat part No B3510112,Swastic,Modi Guard, Saint Gobin)

Taking down Chowkhats or frames with shutter (without taking off shutters from the frames)not exc. 1.5 sq. m each and removing to store complete all as specified and directed by Engineer-in-charge.

Taking down Chowkhats or frames exc. 1.5 sq. m but n.exc 4 sqm each with shutter (without taking off shutters from the frames) and removing to store complete all as specified and directed by Engineer-in-charge.

S&F 105mm X 600mm size pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed by Engineer-in-charge.

S&F 150 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engineer-in-charge.

S&F 150 mm long Aluminium handles, cast type, anodised complete all as specified and directed by Engineer-in-charge.

S&F, 100mm size, butt hinges, medium weight, cold rolled mild steel including necessary welding if required all as specified & directed by Engineer-in-charge.

S&F, 100mm size, cold rolled mild steel butt hinges, medium weight complete all as specified & directed by Engineer-in-charge.

S & F MS Pressed handle 150mm size oval type stove enameled black complete all as specified and directed by Engineer-in-charge.

S & F mild steel tower bolts 150 mm long stove enameled black with bright bolt complete all as specified and directed.

S & F mild steel sliding bolt 300 mm long plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fix complete all as specified and directed by Engineer-in-charge.

S&F factory made 2nd class hardwood plain framed, panelled shutter 35 mm thick with locking rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneered on both face. The size of rail and style as per IS 1003 (Part-I) kiln seasoned and chemically pressure treated 2nd class hard wood complete all as specified and directed by Engineer-in-charge.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed by Engineer-in-charge.

S&F 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drwn steel spring, fixed in floor complete as directed by Engr-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame exc 1.5 sqm including punching or drilling out old glazing pins/ springs clips and providing and fixing new ones.

S & F 4 mm thick plain glass and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane.

S & F in repairs Galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples

Taking up or down steel tubing 15mm dia and connections including cleaning for refixing

Taking up or down steel tubing 20mm dia and connections including cleaning for refixing

S&F steel water tubing (ISI marked) medium grade galvanised, 15mm bore with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed by Engineer-in-charge.

S&F steel water tubing (ISI marked) medium grade galvanised, 20mm bore with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed by Engineer-in-charge.

S&F steel water tubing (ISI marked) medium grade galvanised, 25mm bore with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed by Engineer-in-charge.

Cutting the existing 80 mm bore pipe CI/DI pipes and reducing to required length in position for insertion of new tees (80x80x25mm) , branches, etc complete all as specified and directed by Engineer-in-charge.

S&F in repairs 15 mm bib taps fancy type cast copper alloy with crutch with butter fly handle, screwed for iron pipe or brass ferrule complete all as specified and directed by Engineer-in-charge.

S&F in repairs 15 mm dia stop valves cast copper alloy, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and directed by Engineer-in-charge.

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed by Engineer-in-charge.

S&F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed by Engineer-in-charge.

S & F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors fixed to walls all as directed by Engineer-in-Charge.

S & F in reapir 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors fixed to walls all as directed by Engineer-in-Charge.

M&L for 50 mm thick PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) laid in alternative bays as in plinth protection including finished the surface even & fair without using extra cement & filling the joints with mastic filling i.e one part of bitumen 85/25, 3 parts of sand by weight complete all as specified and directed by Engineer-in-charge.

M&L preparing of new wood surfaces and wood based materials of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified & directed by Engineer-in-charge.

S & F 1000 litres capacity, three layered, white colour Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling existing water storage tank of any descripiton complete all as specified & directed.

S&F 1000 litres capacity, three layered, white colour Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified & directed.

S&F in repair 20mm bore ball brass valve, high pressure with polythene float & fly nut screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed by Engineer- in -charge.

S&F 20mm bore ball brass valve, high pressure with polythene float & fly nut screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed by Engineer- in -charge.

S&F in repair Vitreous Cliina wash basin, white, flat back, size 580x450 mm (for Hospilal use) excluding taps, waste, chain and plug and porcelain stopper but including brackets including cutting for and pinning in ends of brackets errect stand, fixing waste pipe complete all as specified & directed by Engineer-in-charge.

S&F in repair 15 mm pillar taps fancy type cast copper alloy with capstan heads, chromium plated, screed down high pressure, with or without lettered 'Hot; or 'cold' with long screwed shanks and fly nut, screwed for iron pipe complete all as specified and directed by Engineer-in-charge.

S&F in repairs Vitreous china urinals with urinal spreader, full stall (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing complete all as specified and directed by Engineer-in-charge. (Make :- Cera Cat Part No- 54020102,Hindware Cat Part No-60002)

S&F in repair Towel rail 600 mm long of CP brass fixed with and including chromium plated brass screw and wooden/plastic cleats (minimun weight 190 gms) complete all as specified and directed by Engineer-in-charge.

S&F in repair PVC connections 450mm long, 15mm size with PTMT nuts for WHB, flushing cistern, geysers etc complete all as specified & directed by Engineer-in-charge.

S&F PVC connections 450mm long, 15mm size with PTMT nuts for WHB, flushing cistern, geysers etc complete all as specified & directed by Engineer-in-charge.

S&F factory made steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded all as specified & directed by Engineer-in-charge.

S&F factory made steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete without glazing bars, dovetailed or welded all as specified & directed by Engineer-in-charge.

S&F framed work such as grills, gratings, etc with ends of bars shouldered and / or riverted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, raillings, frame work of water tanks and similar work confirming to Fe-290 grade E-165 complete all as specified & directed by Engineer-in-charge.

S&F in repair 15 mm bore stop cock/angle cock, fancy type, chromium plated, with long shank and cup (concealed type) cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for union complete all as specified & directed by Engineer-in-charge.

S&F 15 mm bore stop cock, fancy type, chromium plated, with long shank and cup (concealed type) cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for union complete all as specified & directed by Engineer-in-charge.

S & F in repair Soap dish, chromium plated complete all as specified and directed by Engineer-in-charge.

S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed by Engineer-in-charge.

S&F 3mm thick, sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 sqm in each panes complete all as specified & directed by Engineer-in-charge.

S & F in repairs 100 mm bore Cast Iron Sand cast pipes, Soil, waste and vent pipes in any length with or without ears, with cement joints fixed to walls complete all as specified and directed by Engineer-in-charge.

S & F in repairs 75 mm bore Cast Iron Sand cast pipes, Soil, waste and vent pipes in any length with or without ears, with cement joints fixed to walls complete all as specified and directed by Engineer-in-charge.

S&F in repairs cast iron cowls 100 mm dia complete all as specified and directed by Engineer-in-charge.

M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested complete for 150mm dia pipe complete all as specified & directed by Engineer-in-charge.

M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested complete for 200mm dia pipe all as specified & directed by Engineer-in-charge.

M&L for 150mm dia SGSW drain pipes grade `A’ (ISI marked) laid in trenches and jointed in CM 1:1 and tested complete all as directed by Engineer-in-charge.

M&L for 200mm dia SGSW drain pipes grade `A’ (ISI marked) laid in trenches and jointed in CM 1:1 and tested and including demolition and breaking up drain pipes including cement bedding and hauching complete and removing debris outside MD land complete all as directed by Engineer-in-charge. Note :- Excavation and earth work shall be measured and paid separately.

Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced concrete) of 150mm bore set in cement mortar all as directed by Engineer-in-charge. (Note :- Excavation and earth work shall be measured and paid separately.

M&L for demoltion of reinforced cement Concrete of any description and in any position not otherwise specifically provided for cut as required to facilitate demolition) complete all as specified & directed by Engineer-in-charge.

M&L for precast reinforced cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) shelves, cover slabs (manholes etc) and similar articls with plain faces, set in cement morat 1:4 with and including necessary form work complete all as specified & directed by Engineer-in-charge.

M&L for mild steel TMT bars 10mm dia & over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed by Engineer-in-Charge.

M&L for mild steel TMT bars 6mm to 8mm dia & over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed by Engineer-in-Charge.

Taking down all loose plaster and concrete if any in RCC columns, Chajjas, beams,slabs or any other type of RCC members,removing all loose ruts/scale from reinforcement etc by using wire brushes ,sand paper or any other chemicals, applying a coat appoxy coating on old reinforcement, tying IRC fabric of size 75x75mm of 3mm dia and binding with mild steel wire annealed with exsting reinforcement and applying cment slurry uniformaly to exposed surfaces and gunniting using CM 1:3 avg thickness of gunniting not less then 30mm and finishing the surfaces with 10mm thick rendering in CM 1:4 finished even and smooth with out using extra cement and removing the debris from the site, complete all as specified and directed by Eng-in-charge.

Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified and directed by Engineer-in-charge.

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including MCBs any type and capacity making good the disturbed surfaces to match with the existing finishes complete all as specified and directed by Engineer-in-charge.

Taking down of old unsv tubelight fitting /bulkhead/ garden light/ gate light of any descriptionlight fitting any type any watt complete all as specified and directed.

M & L for Point wiring using colour coding as per IS with 1.5 Sq mm multistranded copper conductor single core FRLS PVC insulated unsheathed 1100 Volts, ISI-694 marked drawn through and including heavy duty ISI marked PVC concealed Conduit alongwith its accessories of suitable size, with GI sunken boxes of 1.2 mm thick, 60 mm depth of suitable size including fixing/ grouting sunken as per site requirement and making good to match with existing finishes including provision of cover with white colour hylum sheet of 3.0 mm thickness switches/ sockets/ regulators etc including running up of 1.5 Sq mm copper conductor FRLS, PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly all as specified for the following :

(a) One light point controlled by one, one way switch

(b) One exhaust fan point controlled by one switch

(c) One three pin 5 Amps socket outlet point controlled by one No one way switch on independant board

All as per item No 141.00 above but with copper conductor cable 4 sqmm for 3 pin socket outlet, 15 Amps including provision of 4sq mm PVC insulated copper conductor cable as earth continuity conductor on independent board complete all as specified & directed by Engineer-in-charge.

S&F for Switch piano flush type single pole one way, and 6 amp complete ISI mark complete all as specified & directed by Engineer-in-charge.

S&F for Socket outlet multipurpose having provision for 2 in 1, 3 pin 6 amp piano flush type complete all as specified & directed by Engineer-in-charge.

S & F for ceiling rose, 3 phase/PVC/ polycarbonate, isolated body, isolated body ISI marked complete all as specified & directed by Engineer-in-charge.

S & F for MCB DB SPN 4 way double door IP 43 complete prewired including 200 amps rated bus bar etc suitable for operation on 240 volt 50 Hz AC supply including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified & directed by Engineer-in-charge.

S&F MCB single pole & neutral 32 Amps, 240 Volts, 10 KA rapturing capacity, 'C' curve with connection testing and commissioning complete all as specified & directed by Engineer-in-charge.

S&F MCB single pole 6 to 32 Amps, 240 Volts, 10 KA rapturing capacity, 'C' Curve with connection testing and commissioning complete all as specified & directed by Engineer-in-charge.

S & F for LED tube light fitting 20 Watt 4 Feet or 1183 MM in lenth, IP 20 Protection, wall mounted type, Slim LED Batten with polycarbonate housingand diffuser, elegant design with end caps, having excellent thermally managed polycarbonate extrution, LM 80 Certified LED having Integral Electronic Constant Current Driver , IP 20 Protection, Opreating voltage 240 V , 50Hz AC Supply and Operating tempraeture 0 to 50 C, Power factor ≥ 0.9, Lumen output ≥ 2000, necessary mounting arrangements on PVC Square box 2 Nos, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting with white color flexible pipe complete all as specified and directed by Engineer-in-charge.

S & F for LED tube light fitting 10 Watt, 2 Feet or 591 MM in length, IP 20 Protection, wall mounted type, Slim LED Batten with polycarbonate housingand diffuser, elegant design with end caps, having excellent thermally managed polycarbonate extrution, LM 80 Certified LED having Integral Electronic Constant Current Driver, IP 20 Protection, Opreating voltage 240 V , 50Hz AC Supply and Operating tempraeture 0 to 50 C, Power factor ≥ 0.9, Lumen output ≥ 1000, necessary mounting arrangements on PVC Square box 2 Nos, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting with white color flexible pipe complete all as specified and directed by Engineer-in-charge.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers and provision of cable 3 core, 0.5 sqmm multistranded copper conductor PVC insulated flixible wire from ceiling rose to fan complete all as specified and as directed by Engineer-in-charge.

Supply and fix geysers of 25 ltr capacity BEE 5 Star made of rust proof body to withstand pressure capacity puf insulation and inner container coated with unique polymer protective coating technology to resist corrosion from hard water, including surface and vetical type thermostat and cutout and outsmart three level safety against high temperature and pressur provided with high tech adjustable thermostat and internation standards multifunction valves complete all as specified and directed.

M&L for Single pole enclosure with a two pin and earth plug and socket complete with one single pole MCB SP 20 Amps, 240 volts complete all as specified & directed by Engineer-in-charge.

M&L for sand cushioning to underground PVC/XLPE cable with tibba sand and punning to provide required cover complete all as specified & directed by Engineer-in-charge. (Note :- For the purpose of payment, punned thickness of sand cushioning shall only measured).

Supply & laying 40 to 50mm thick roughly hammer dressed Jodhpur stone patti cable cover 25cm to 30cm wide and n. exc 60cm long each laid dry abutting with each other with maximum gap between adjacent slabs n. exc 10mm complete all as specified & directed by Engineer-in-charge.

M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 Sqmm 2 core complete all as specified and directed by Engineer-in-charge.

S&F integral decorative LED bollard with polycarbonate diffuser square shape with IP 65 protection suitable for 10 watts LED, 0.6 mtr with necessary MS base box made out of MS sheet of 2mm thick suitable size abbended in PCC (1:2:4) base and electrical connections complete all as specified and directed by Engineer-in-charge. Make :- Crompton, Havells, Philips or equivalent as approved by GE.

S&F PVC insulated copper conductor 2.5 sq mm 3 Core drawn through and including PVC conduit medium grade with necessary fixing arrengements and connecting items complete all as specified and directed by Engineer-in charge.

M&L for lamp holder, PVC/ polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and directed by Engineer-in charge.

S&F LED Bulb 9 Watt of Base E-27 complete all as specified and directed by Engineer-in charge.

AMBEY MAA CONSTRUCTION COMPANY

S K TRADER

M/s Shri Inder Construction Company

Leelashah Enterprises

Dadhich Engineers