Construction of Govt polytechnic college at Kalpa Distt Kinnaur SH Providing EI in phase I therein

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.

Group C.

Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with 2-way, 5/6 amps. modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.

Group C.

Providing and installation of surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver with minimum 2 years warranty suitable for input voltage: 220-240 V, 50/60 Hz, complete with all accesories, including mounting clips & loop in loop out wire, connections, testing and commissioning etc. as required, Make: Twinkle, Philips, GE or any other approved by Engineer-in-Charge.

LED Batten Light 20 Watt. (length 4 Feet)

Providing and installation of following type of Surface mounting round LED Downlight with AL die-cast body, finish with drop down PC diffuser to deliver low glare illumination with optimized heat sink for efficient heat dissipation suitable for input voltage: AC 220-240 V, 50/60Hz with minimum 2 years warranty complete with all accessories, including making connections, testing and commissioning etc. as required. Make: Philips, Twinkle, GE, or any other approved by Engineer-in-Charge.

LED Downlight 6 WH RD

LED Downlight 18 WH RD

Providing and installation of following type of LED MIRROR LIGHT 10 Watt. Extruded Aluminium batten available in 2ft run length with multiple lumen packages with minimum 2 year warranty suitable for input voltage: 220-240 V, 50/60 Hz, complete with all accesories, including mounting clips & loop in loop out wire, connections, testing and commissioning etc. as required, Make: Philips , GE, Twinkle or any other approved by Engineer-in-Charge.

LED Mirror Light 10 Watt. (length 2 Feet)

Providing and installation of following type of Surface mounting Square type LED Panel Light with minimum 2 years warranty powder coated housing made of CRCA sheet, suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, including making connections, testing and commissioning etc. as required. Make: Philips, GE, Twinkle or any other approved by Engineer-in-Charge.

LED Panel Light 30 Watt. (Size:- 1' x 1' feet)

LED Panel Light 36 Watt. (Size:- 2' x 2' feet)

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:-

Exhaust Fan, Heavy duty, 300 mm sweep

Providing & fixing the louvers/shutters complete with frame for exhaust fans of all sizes as required:-

Shutter for Exhaust Fan 12 Inch.

Providing and installation of following type of Fresh Air Ventilating fan Non-metallic range with lower Shutter of following sizes in the existing opening, including making the hole to suit the size of the fan, making good the damages, connections, testing and commissioning etc. as required Make: Havells, Khaitan, Bajaj, Crompton, Standard or any other approved by Engineer-in-Charge.

Fresh Air Ventilating fan 250 mm sweep

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required:-

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required.

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-

Single pole 6 Amp. Cat-A.

Providing and fixing following rating, double pole (single phase & neutral) 10 KA breaking capacity 240 volts, Residual Current Breaker with Overcurrent Protection (RCBO), having a sensitivity current up to 300 miliampers, suitable for protection against leakage current, short circuit & over load, the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: L&T, Havells, Schneider or any other approved by Engineer-in-Charge.

Double Module RCBO 25 Amp.

Double Module RCBO 40 Amp.

Four Module RCBO 63 Amp.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-

Double door-8 way

Double door-12 way

Double door-16 way

Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.

2x1.5 Sq. mm.

2x6.0 Sq. mm.

Wiring for circuit / sub-main with 4x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.1.5 Sq.mm. (4x1.5+2x1.5) HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Supplying and fixing sheet metal bus-bar chamber suitable for 100 Amp. 415 volts capacity with 4 No. copper strip bus-bars Each of length 300mm & cross-sectional area (25.4mmx3.17mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions (380mmx400mmx150mm) nominal with all accessories including connections, earthing the body etc. as required:-

vijan agencies

ARUN KUMAR SHARMA