SPL REPAIRS TO BLDG NO P31 JCOS MD ACCN AT BIKRAM ENCLAVE AND SPL REPAIRS TO ROOF TREATMENT OF BLDG NO P116 GOVT MD ACCN AT BIKRAM ENCLAVE OF ASCON NODE UNDER GE SOUTH UDHAMPUR

Excavation in trenches not exc 1.5m wide and not exc. 1.5m depth in any type of soil for foundation etc or for shafts, well drain pipes getting out in any type of soil complete all as specified and as directed.

Returning fillling in including spreading, levelling watering and well ramming in layers not exc 25cm thick in each layer complete all as specified and as directed.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position and in un framed work complete all as specified and as directed.

Removing excavated soil to a distance n exc 50m and depositing at alevel n exc 1.5m above the starting point complete all as specified and as directed.

Dismantling asbestos cement/galvalum sheet/CGI (corrugated , semi corrugated etc) sheets as in roof covering complete all as specified and as directed.

Dismantling water tanks and removing to store exc 250 & n.exc 500 ltrs of capacity complete all as specified and as directed.

Demolition of reinforced cement concrete in roof floor (other than ground floors) beams staircase, landing chajja and similar work complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided complete all as specified and as directed.

Demolition of brick/stone masonry built in CM complete all as specified and as directed.

Demolition & breaking up drain pipes (SGSW) of 150/ 200 mm dia pipe complete all as specified and as directed.

M&L Providing cement concrete in steps, seismic and other similar bands, parapets and railings up to 60 cm in hieght, coping, kneeless apex stones , bed plates, kerbs not provided for including weathering, slightly rounded or chamfered angles all as directed, 1:2:4 mix type B-0.

M&L for providing 75mm thick cement concrete 1:3:6 type C-2 using 40 mm graded crushed stone aggregates as in plinth protection finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified.

M&L for PCC 1:2:4 type B1 using 20mm graded aggregate as in PCC filling in hold fast and similar work complete all as specified and as directed.

M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and fair complete all as specified and as directed.

M&L for reinforced cement concrete type B-1 (using 20mm graded crushed stone graded aggregate work as in Chajjas etc

M&L PCC 1:3:6 type C-1 as in surface channels/drains all as specified and as directed.

M&L for reinforced cement concrete type B-1 (using 20mm graded crushed stone graded aggregate work as in slabs supported on walls , beams etc complete all as specified and as directed.

M&L for Plain cement conc 1:3:6 type C-2 using 40mm graded agg as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for DWCPE (SN8) 180mm (OD) pipes complete all as specified and as directed.

M&L for 75 mm thick PCC 1:4:8, type D-2 by using 40 mm graded stone aggregate as in sub base floor complete all as specified and as directed..

Machine pressed (factory made) precast plain cement concrete 1:2:4 type B-1 (20mm graded crushed stone aggregate), kerb stone & the like of size 300mm x 300mm x 100mm thick or of size as approved by GE, with plain fair faces including chamfers, weathering etc, embedding in position/laid in trenches on edges of roads, including excavation in any type of soil, setting in cement mortar (1:4) returning filling and removal of surplus soil/debris to a distance n.exc. 50m from the starting point, complete all as specified and as directed.

M&L for form work to soffits of suspended slabs and similar work not exceeding 200mm thick complete all as specified and as directed.

M&L brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:6 complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks exc 6m mean radi

M&L for hardcore of broken stone of guage n.exc 63mm deposited spread and levelled in layer n.exc 15cm thick watered and well rammed to true surfaces complete all as specified and as directed.

M&L for sand cushion 20 to 30 mm thick for laying and fixing interlocking tiles complete all as specified and as directed.

us straight or curved on plan built in cement mortar 1:4 complete all as specified and as directed.

M&L half brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:4 complete all as specified and as directed.

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions complete all as specified and as directed.

M&L for Rendering 5mm thick on brick or concrete surface as in ceiling in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for Non skid Ceramic coloured tiles (square/rectengular) 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floor etc incl 10mm thick screed bed in cement mortar 1:4 for laying floor finishes under floo etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface.

M&L for Non skid Ceramic coloured tiles (square/rectengular) 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm 10mm thick screed bed in cement mortar 1:4 for laying floor finishes under floo etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and as directed.

All as per item No 44 above but on vertical surfaces as in skirting incl laid over 10 mm thick rendering in CM 1:4 complete all as specified and as directed.

M&L for Glazed Coloured Ceramic tiles in vertical surface 450x300x7mm thick incl laid over 10 mm thick rendering in CM 1:4, set and joint in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 20-25 mm thick over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete including 20mm thick screed bed in CM 1:3 complete all as specified and as directed.

M&L for machine cut kota stone 20-25 mm thick in riser of steps/skirting, laid over 10 mm thick rendering in cement mortar 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms (in one piece) and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with granite shade and including 20mm thick screed bed in CM 1:3 complete all as specified and as directed.

M&L machine pressed precast concrete coloured interlocking paver block (glossy finish) any shape and size (sample approved by GE) confirming to IS 15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment. complete all as specified and as directed.

Moulding of Granite/Kota stone full round moulding complete all as specified and as directed.

M&L for applying one coat of wall putty on walls to give uniform surface complete all as specified and directed.

M&L Machine pressed factory made cement concrete tiles 30cmx30cmx20mm thick set jointed in neat cement slurry in floors with grey cement and no pigement over 20mm thick screed bedding layer of cement 1:4 complete all as specified and as directed.

M&L one coats of cement cement base paint on walls including preparation on new surfaces complete all as specified and directed.

M&L for preparation of steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.

M&L two coats of oil bound distemper on walls including preparation on new surfaces over a coat of primer complete all as specified and directed.

M&L for applying two coats of white washing on ceiling including preparation of new/old plastered surfaces complete all as specified and as directed.

S&F in replacement 25 Watt lighting luminaire with unique peanut optics to ensure uniform distribution, higher spacing between poles and maintenance free system for city roads and Streets, 50% Energy Savings, IP66 Protection PC and FG Cover, High Impact Resistance complete including LED Lamps and all accessories including bracket made out of 25mm bore GI pipe (light grade), 1.20 m long made to shape and fixed to existing pole or bldg by means of 2 Nos mild steel flat iron 40x6mm clamps with suitable size bolt, nuts & washers and connecting with three core flexible copper wire of size 23/0.0076 from ceiling rose to existing junction box complete all as specified and directed. Make Philips/ Havells/ Bajaj/ Crompton greaves.

Roughing surfaces of old conc surfaces by picking up , sweeping,cleaning and washing down with water to remove dust etc including taking down tarfelt and brushing neat cement slurry @3kg/Sqm including 20mm thick screeding in CM (1:4) finished even and smooth complete all as specified and as directed.

M&L for Preparation of newly plastered surfaces on wall/ roof projections including facia, cornices etc and applying exterior water proof wall care putty @ 1 Kg(undiluted) per sq mtr. of average thickness 1 mm to 2mm over the prepared plastered wall /ceiling surfaces, one or more coats and grinding the puttied surfaces with mechanical grinder for make the surface even and smooth for receiving primer and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives & Color stay technology, Excellent dirt pickup resistance @ 1.79 litre/10 sqm diluted with water as per manufactures instructions over and including priming coat of exterior primer applied @ 0.9 litre (Undiluted)/ 10 Sqm over old/new putty surfaces of wall/ceiling complete all as specified and directed. Note:-Paint to be applying with using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed.

M&L for two coats of weather proof exterior emulsion paint over a coat of primer including preparation of new plastered surfaces of any description complete all as specified and as directed.

Writing letters or figures (Block, Roman, Italic or Indian) n exc. 30 cm high complete all as specified and as directed.

S&F pre-laminated 18mm thick lead free factory made 100% solid WPC (wood polymer composite) sheet having high natural fiber conter 25 to 30% wood colour sheets with density not less than 500 kg/cum and the weight of sheet of 1 Sqm should be 11 kg (+/- 5%) manufactured by ISO 9001-2015 certified company. the sheet should be 100% water proof, ermite proof, fire ratardant, manufacured by single layer extrusion process with exellent screw holding capacity and shore D hardnes, compete as per direction by Engr-in-Charge.

S&F steel window (box type) factory made with side hung shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all specified. Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 ii) MS fillets, glazing, wire gauge shall be measured and paid separately.

S&F factory made mild steel ventilators box type with upper top hung shutters and bottom fixed type shutters including pintol hinges,steel peg stay and one shop coat of red oxide primer complete all specified. Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1302/2009 Sheet 1/3 to 3/3 ii) MS fillets, glazing, wire gauge shall be measured and paid separately

All as pe

S&F 18/19mm thick ISI, termite proof , chemically well pressed, prelaminated particle board exterior grade prelaminated, one side with decorative choice lamination and other side balancing white lamination fixed with screws to frame work for kitchen cabinetstand cup boards etc includimg 6mm th teak wood beading all around complete all as specified and directed Make;- Win Tuff or its equevelent

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe 290 Gd E-165 complete all as specified and as directed.

S&F 4mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and as directed.

S&F stainless steel wire cloth 0.36mm nominal and average width of apreture 1.40mm and fixed with tinned teaks or wire staple complete all as specified and as directed.

M&L Roughening surfaces of old concrete surfaces by picking up, sweeping, cleaning and washing down with water to remove dust etc including taking down tarfelt and brushing neat cement slurry @ 3 kg/Sqm including 15mm thick screeding in CM (1:3) finished even and smooth mixed with water proofing compound and applying bituminous primer on roof surfaces @ 0.40 ltr/sqm and applying one coat of hot blown bitumen of grade 85/25 @ 1.20 kg/sqm and provide APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced and bonded completely to the surfaces with min end overlap of 15 cms and side lap 75 mm (overlaps to be bounded with thermo fused by flame) all as specified and directed. Make of APP membrane : STP/IWL

S&F stainless steel sliding door bolt plate type 250 mm long bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified and as directed.

S&F 100mm size hasp and staple safty type aluminum anodized with mild steel hinges pin including bolt to hinge plate and fixed with screw complete all as specified and as directed.

S&F in repair curtain rod of stainless steel 25mm dia with brackets, stops, end bulbs, rollers etc complete all as specified and directed.

Health faucet ABS body with wall hook and 1 mtr chrome plated PVC hose pipe in repair complete all as specified and directed. Make : CERA Cat Part No F8030103 and equivalent in Parrywar .

Chromium plated toilet paper holder in repair complete all as specified and directed. Make : Jaquar Cat Part No ACN 1153N and equivalent in CERA/ Parryware.

Supply only cast iron 'P' or 'S' trap 100mm dia complete all as specified and as directed.

Supply only Flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern complete all as specified and as directed.

S&F in repair 1mm thik plate rack made of stainless steel, 600x750x250 mm (Wt not less than 7.5 Kg) including brackets and embedded in brick wall all as specified and as per manufacturers instruction.

S&F 10 ltr capacity PVC valveless, syphonic action type flushing cistern low level white with inlet, ball valve, float and handle including connetion to pipe but fixed in repair complete all as specified and as directed.

S&F C P brass magic eye in main door as per sample complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) pipes single socketed of pipe wall thickness 2.20mm in any length with rubber ring joints fixed to walls with MS bracket of size 25mmx3mm with necessary nuts, bolts & washer duly painted with black paint complete all as specified and directed.

S&F stainless steel peg set of six as per sample complete all as specified and as directed.

S&F PVC (SWR) branch piece 110mm bore, single (single Y) equal or unequal pipe wall thickness not less than 2.00mm complete all as specified and as directed.

S&F PVC (SWR) junction single 110mm bore, (Single T) equal or unequal with access door pipe wall thickness not less than 2.00mm complete all as specified and as directed.

S&F PVC (SWR) junction single 75mm bore,(Single T) equal or unequal pipe wall thickness not less than 2.00mm complete all as specified and as directed.

S&F PVC (SWR) bend any radius for upto 110mm bore pipe pipe wall thickness not less than 2.00mm complete all as specified and as directed.

S&F PVC (SWR) vent cowl 110mm bore pipe pipe wall thickness not less than 2.00mm complete all as specified and as directed.

S&F PVC (SWR) vent cowl 75mm bore pipe pipe wall thickness not less than 2.00mm complete all as specified and as directed.

S&F PVC (SWR) reducers 110mm bore pipe pipe wall thickness not less than 2.00mm complete all as specified and as directed.

PVC (SWR) couplers 110mm bore pipe pipe wall thickness not less than 2.00mm complete all as specified and as directed.

PVC (SWR) couplers 75mm bore pipe pipe wall thickness not less than 2.00mm complete all as specified and as directed.

S&F PVC (SWR) Floor trap, 75 mm dia of outlet, plain with grating including jointing with solvent cement all as directed.

S &F Soap dish holder, fixed in repairs, complete all as specified and as directed.

S&F in repairs 600mm long brass chromium plated towel rail fancey type make Jaquar Cat No ACN-1111NM and equivalent Parryware.

S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar including fixing cantilever brackets connecting union to pipe and 32mm dia GI pipe duly painted upto Nihani Trap or Floor trap complete as directed at site, overall size 495mmx420mm bowl size 410mm x 330mm x160mm complete all as specified and as directed.

S&F PVC (SWR) pipes 75mm bore single socketed , in any length with rubber ring joints fixed to wall complete all as specified and as directed.

S&F in repairs Corner Glass shelf with chromium plated guard rails Make J

aquar Cat No ACN-1171N and equivalent in CERA/Parryware.

S&F in repairs Front Glass shelf with chromium plated guard rails Make Jaquar Cat No ACN-1171N and equivalent in CERA/Parryware.

M & L 15mm bore galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete including taking down all as specified and as directed.

M & L 20mm bore galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete including taking down all as specified and as directed.

S&F in repairs 15 mm dia Wall mixer, WHB & Sink mixer chromium plated screwed down high pressure with crutch or butterfly handle screwedboth ends for iron pipes or for unions and fixed complete all as specifie and as directed. Make : Jaquar or equivalent in CERA/Parryware.

S&F in repairs 15mm bore Bib tap Chromium plated complete all as specified and as directed.

S&F in repairs 15mm bore angular stop cock with wall flange complete all as specified and as directed.

S&F in repairs PVC connection 15mm bore 450 mm long complete all as specified and as directed.

M&L in repairs Gun metal globe of gate valve with iron wheel head, screwed both ends of size 20mm complete all as specified and as directed.

M&L in repairs Gun metal globe of gate valve with iron wheel head, screwed both ends of size 15mm complete all as specified and as directed.

M&L for Mild steel Rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails guides for sliding doors, and vertical posts of pipes sections fixed with angle cleats or other connecting plates, Fe-410-W (Gde - E -250), complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M & L in repairs brass chromium plated shower rose 125mm size with swivel joint fixed to pipe or union of 15mm bore complete all as specified and as directed.

Taking down main switches, distribution boards and cut outs etc. of any type and capacity along with the existing boards and removing the same from site and making good the disturbed surface/portion of walls complete all as specified and directed By Engr-in-Charge.

Taking down carefully sub main wiring of any nos of wire and size with earth wire on wooden batten/surface conduit/casing caping complete with its all accessories complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 1000 liters including all accessories complete all as specified and as directed.

S&F for DWCPE (SN8) 180 (OD)/163(ID) mm diameter pipes laid on 150mm thick bed to execute and make sewer line functional complete all as specified and as directed.

S&F for DWCPE (SN8) 200 (OD)/175(ID) mm diameter pipes laid on 150mm thick bed to execute and make sewer line functional complete all as specified and as directed.

Taking down carefully, copper/ aluminum point wiring (light, fan, socket or power) complete including fitting such as switch, sockets, ceiling rose, pendants socket,fan regulators any type, rectangular board ,light fittings,terminal boxes etc removing materials for taking credit and making good disturbed surfaces of walls floors and ceiling complete all as specified and as directed.

Point wiring for one light/ fan/bell point controlled by one switch using 1.5 Sq mm FRLSH copper conductor cables (multistranded) PVC insulated and unsheathed in and including PVC concealed conduit pipe as per site requirement (size not less than 20mm dia), medium grade with Modular sunken boxes & PVC/metal back plate for mounting modular type switches, sockets & regulators etc with cover plate modular type including supplying and laying PVC insulated and stranded unsheathed 1100 volts coppper conductor cable 1.5 Sq mm as earth wire connected to earth dolly including cutting of chases in wall /ceiling etc and making good the disturbed surfaces match to existing with cement mortar and putty white /colour wash complete all as directed . Make: Havells/ Finolex/ Polycab.

All as per item no 139 above but with cable 2.5 sqmm FRLSH for one 3/5 pin 6 Amp socket outlet point on an independent board.

All as per item no 4 above but an independent board with cables of size 4.0 sqmm.

All as per item no 139 above but with cable 2.5 sqmm FRLSH for one 3/5 pin 6 Amp socket outlet point on the same board with other switch.

All as per item no 139 above but for one bell/buzzer point controlled by one bell push single pole one way .

All as per item no 139 above but for Two way point control by Two two way 6 Amp switch.

All as per item no 139 above but for one 3/6 pin 16 amps socket outlet point on an independent board with cables of size 2.50 sqmm.

S&F for modular switch 6 Amps single pole one way 230 V, 50 Hz, AC , with outer cover complete all as specified and directed by Engr In charge. Make:Legrand/Havell crabtree/L &T

S&F Switch modular, flush type, single pole, Two way 5/6 Amp 230 Volts complete all as specified and directed. Make:Legrand/Havell crabtree/L &T

S&F Lamp holder PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F LED retrofit lamp of capacity 12 watt, B-22 holder base with polycabonate body and aluminium heat sink warm white/day light complete all as specified and directed.

S&F LED retrofit Inverter lamp of capacity 9 watt,power backup upto 4 hrs B-22 holder base with polycabonate body and aluminium heat sink warm white complete all as specified and directed.Make-Philips or techno commercial equivalent in approved make

S&F in replacement ceiling rose,3 terminal,PVC/ Polycarbonate, insulated body, surface bakelite sheet 63.50mm dia complete all as specified and directed.

S&F in replacement electric bell ding dong type AC 230 Volts, 50 Hz single pole complete all as specified and directed.

S&F modular bell push, flush type, single pole, one way 5/6 Amp 230 volts complete all as specified and directed. Make:Legrand/Havell crabtree/L &T

S&F in replacement sheet metal enclosure for MCB DB double door type, single pole and neutral 12 way 240Volts with 200 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

Supply and fixing in replacement 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 Amp current carrying capacity in the MCB DB complete with connection testing and commissioning.

S&F in replacement MCB Single Pole, 6 to 32 Amps 240 volts, 10KA breaking capacity, convenient to 'C' Curve complete all as specified and directed.

S&F for modular socket 3 Pin 6 Amps flush type 230 V, 50 Hz, AC , with outer/inner cover complete all as specified and directed by Engr In charge. Make:Legrand/Havell crabtree/L &T

S&F for modular switch 16 Amps single pole one way 230 V, 50 Hz, AC , with outer cover complete all as specified and directed by Engr In charge. Make:Legrand/Havell crabtree/L &T

S& F in replacement LED tube light fittings of 20 wattage Aluminium Extruded Body including rawl/plug ,making connection with and including 23/0.0076 flexible copper wire three core from connector to ceiling rose not more than 1.2 mtr fixed to wall firmly , complete all as specified and directed.

S & F LED lights fitting 1x 20W, 230V,AC white/warm white decorative box type with driver,which gets automatically switched ON during Power cut and Run effectively up to 3 Hours, Lumens Capacity-2000lm ,PF-0.9(min) ,colour temp 6500K,CRI>80,IP 20 light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-In-Charge. Make- Havells Pride Plus Inverter Batten cat Part No LHEXACP7FN1W020 or techno commercial equivalent make in Syska/Bajaj

S & F Modular TV Socket outlet single with inner and outer cover required module including TV cable required length from roof complete all as specified and directed by Engr-in-charge.

S&F for modular socket combined 2-in-1, 6 Pin 6 & 16 Amps 230 V, 50 Hz, AC , flush type with outer/inner cover complete all as specified and directed by Engr In charge. Make:Legrand/Havell crabtree/L &T

S&F in replacement electronic step type fan regulator 100 watt 230 volts 50Hz two module C/S deluxe type complete all as specified and directed. Make: Havells Crabtree/ Legrand/ Indoasian.

M & L for Earthing complete with galvanized steel earth plate electrodes 600 mmx600 mm x6.3 mm thick buried directly in ground earth plate not less than 2.25 m deep below normal ground level with top edge of the plate not less than 1.5 m below normal ground level connected to and including galvanized steel earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and steel including PCC pit in PCC 1:2:4 type B-1using 20 mm graded crushed stone aggregate, RCC frame with 40mm thick RCC cover reinforced with 8mm dia deformed bars handle. including excavation and earth work in any type of soil medium grade GI watering pipe 20mm bore with funnel and wire mesh and light grade GI protection pipe 15mm bore main board complete all as shown in electrical plate No 3 connected to main control board all as specified and testing on completion. Note: Excavation earthwork charcoal PCC pit is covered under this item including taking out existing earth plate etc If earth resistance of earthing is not found (2 to 5 Ω) satisfactory earthing shall be redone by the contractor.

Supply and fixing in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. Make- Havells LED Pride Plus Neo Batten 10 W Cat Part No LHEXACP7IN1W010 or Equivalent make in Bajaj/C&S

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with serv

ice value 6.00 BEE.Five star rated with brushless direct current motor (BLDC) with Remote complete all as directed and specified by Engr-In-Charge. Make- Bajaj Energos 35NR or Techno commercial equivalent in Usha/CG

Supply and fix exhaust fan made of sturdy Engineering plastic body complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm including making hole for exhaust fan plastering making good surface all as directed and specified by Engr-In-charge.

Supply, laying and testing (in replacement) of cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core

S & F in repair LED light fitting 1x 9W/10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. Make- Wipro/Bajaj /Philips

S&F Double Walled corrugated DWC Pipe of size 40 mm including snap fit coupler Pt-II for protection of LT Cable in underground all as specified.

Taking down Ceiling fans/Exhaust Fan, cleaning its dust particles oiling,greasing,one coat of synthetic enamel white spray painting with blade ,reassemble the same along with all fittings and hanging the same back to its original position including connecting the wire to ceiling rose etc complete after completing the wiring all as specified and as directed by Engr-in-Charge.Note :- (i) The spares like condensor, ball bearing, cotter pin, nuts & bolts, connecting rods & hooks etc if found defective/damage deemed to be replaced and make the ceiling fans functional. No extra payments will be done on this account.

S&F Decorative wall light fixture including LED bulb of 12 W (B-22 Base) Warm White/Day Light made up of polycarbonate body, weather proof, LED light fitting fixture with co extruded polycarbonate body, environmental friendly, energy efficient complete with all accessories, prewired and making connection with and including three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp complete all as specified and directed. Make- Havells/Philips/Crompton greaves.