Construction of Balance work of School Building (under Strengthing RAMSA) for High School at Chingam.

Amount

Earth work in excavation by manual means over areas (Exceeding 30 em and upto 1.5 mtr in depth, 1.5 mtr inwidth as well as 10 sqm. on plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed in :All kinds of Soil (including all leads, lifts and carriage etc. complete job)

Random Rubble masonry with hard stone from nallah in foundation and plinth including levelling up with cement concrete 1 :6:12 ( 1 Cement: 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with cement mortar 1:6 (1 Cement: 6 coarse sand) (including all leads, lifts and carriage etc. complete job)

Dumping stone including cost of stone in horizential on level (including all leads, lifts and carriage etc. complete job)

Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm nominal size stone aggregate.Crushed. (including all leads, lifts and carriage etc. complete job)

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:4:8 (1 cement: 4 fine sand : 8 graded stone aggregate 40mm nominal size) Crushed (including all leads, lifts and carriage etc. complete job)

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge. Second kail wood (including all leads, lifts and carriage etc. complete job)

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Second Class kail wood (including all leads, lifts and carriage etc. complete job)

Providing and fixing glass panes, with Putty & Nails wherever necessary Float glass panes of thickness 4mm (including all leads, lifts and carriage etc. complete job)

Providing and fixing 30 mm thick wire gauze shutters using galvanised M.S. wire gauze .of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows: Kail wood II (including all leads, lifts and carriage etc. complete job)

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position :Budloo I Fir wood (including all leads, lifts and carriage etc. complete job)

Providing and fixing plained eaves boarding. 2nd class kail wood 250x32 mm (nominal size) (including all leads, lifts and carriage etc. complete job)

Providing and Fixing 06mm thick ply wood ceiling with nails and screus etc complete (including all leads, lifts and carriage etc. complete job)

Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggreagate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. Crushed. (including all leads, lifts and carriage etc. complete job)

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand) (including all leads, lifts and carriage etc. complete job)

Applying preming coat with ready mixed pink and grey prime of approved brand and manfacture on wood work ( hard and Soft wood)(including all leads, lifts and carriage etc. complete job)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work (including all leads, lifts and carriage etc. complete job)

Distempering with 1st quality acrylic washable distemper (ready made) of approved manufacturer and of required shade/ colour complete as per manufacturer's specifications Two or more coats on new work (including all leads, lifts and carriage etc. complete job)

Providing and fixing of aluminium

Sliding door bolt 250 x16mm

Tower boult 150x10mm

Handles 100mm

Shri Raman Kumar

NASEER AHMED

M/S RAJ CONSTRUCTION and co

Sh. Abdul Majeed

Mohd Ahsan Malik

naseer ahmed