Construction of 100 Bedded Sub District Hospital and Residential Staff Quarters at Akkalkot. Dist. Solapur

Amount

Dismantling flat wooden or Asbestos Cement sheet ceiling with frame work including stacking the materials as directed with all leads, lifts complete.

Removing doors and windows with frames and stacking the materials as directed with all leads, lifts, complete.

Dismantling the Reinforced Concrete work 1:2:4 and sorting out the materials such as steel excetra as directed and stacking them within the specified lead as directed.

Dismantling stone masonry in mud including stacking the materials as directed with all leads, lifts complete.

Dismantling stone masonry in lime or cement mortar including stacking the materials as directed with all leads, lifts complete.

Removing brick bat coba including stacking the spoils as directed with all leads, lifts, complete.

Dewatering on Brake Horse Power basis by using water pump including diversion of stream, providing cofferdams, earthern bunds excetra as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 3.0 BHP pump excetra complete. (Prior approval of Superintending Engineer will be necessary)

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting, excetra complete. (Lift upto 1.5 m.) by Mechanical Means.

Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting, excetra complete. (Lift upto 1.50 m) by Mechanical Means..

Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting, excetra complete. (Lift from 1.5 to 3.0 metre) by Mechanical Means.

Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting, excetra complete (lift upto 1.5 m) by Mechanical Means.

Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming ,watering including shoring and strutting, excetra complete. (Lift from 1.5m To 3.0 m) by Mechanical Means.

Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed.

Excavation for roadway in soft rock, including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading or stacking as directed.

Excavation for roadway in hard rock by wedging and chiselling or line drilling including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed.

Excavation for catch / side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils.

Excavation for catch / side water gutter in Soft rock strata to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed.

Excavation for catch / side water gutters in Hard rock strata to the specified section including stacking the excavated stuff in a regular bund by chiselling and wedging and disposing of unsuitable or excess stuff as directed.

Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, steel centering formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled Reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) excetra complete. With fine aggregate (Crushed Sand Vertical Shaft Impactor Grade).

Providing and laying Cast in situ/Ready Mix cement concrete Mix-30 of trap / granite/quartzite/ gneiss metal for Reinforced Cement Concrete work in foundations like raft, strip foundations, grillage and footings of Reinforced Cement Concrete columns and steel stanchions excetra columns as per detailed designs and drawing or as directed including Steel centering formwork, cover blocks laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing excetra complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With fine aggregate (Crushed Sand Vertical Shaft Impactor Grade) (Ground Floor)

Providing and laying Cast in situ/Ready Mix cement concrete Mix-30 of trap / granite/quartzite/ gneiss metal for Reinforced Cement Concrete columns as per detailed designs and drawing or as directed including steel centering, formwork,cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing excetra complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled Reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With fine aggregate (Crushed Sand Vertical Shaft Impactor Grade) (Ground Floor)

Providing and laying Cast in situ/Ready Mix cement concrete Mix-30 of trap / granite/quartzite/ gneiss metal for Reinforced Cement Concrete columns as per detailed designs and drawing or as directed including steel centering, formwork,cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing excetra complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled Reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With fine aggregate (Crushed Sand Vertical Shaft Impactor Grade) (First Floor)

Providing and laying Cast in situ/Ready Mix cement concrete Mix-30 of trap / granite/quartzite/ gneiss metal for Reinforced Cement Concrete columns as per detailed designs and drawing or as directed including steel centering, formwork,cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing excetra complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled Reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With fine aggregate (Crushed Sand Vertical Shaft Impactor Grade) (Second Floor)

Providing and laying Cast in situ/Ready Mix cement concrete Mix-30 of trap / granite/quartzite/ gneiss metal for Reinforced Cement Concrete columns as per detailed designs and drawing or as directed including steel centering, formwork,cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing excetra complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled Reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With fine aggregate (Crushed Sand Vertical Shaft Impactor Grade) (Third Floor)

Providing and laying Cast in situ/Ready Mix cement concrete Mix-30 of trap / granite/quartzite/ gneiss metal for Reinforced Cement Concrete columns as per detailed designs and drawing or as directed including steel centering, formwork,cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing excetra complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled Reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With fine aggregate (Crushed Sand Vertical Shaft Impactor Grade) (Fourth Floor)

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-30 of trap/ granite/quartzite/ gneiss metal for Reinforced Cement Concrete Beams and Lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/ pumping, compaction and roughening the surface if special finish is to be provided and curing excetra complete. (Excluding reinforcement and structural steel), with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) excetra complete with fine aggregate (Crushed Sand Vertical Shaft Impactor Grade). (Ground Floor)

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-30 of trap/ granite/quartzite/ gneiss metal for Reinforced Cement Concrete Beams and Lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/ pumping, compaction and roughening the surface if special finish is to be provided and curing excetra complete. (Excluding reinforcement and structural steel), with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) excetra complete with fine aggregate (Crushed Sand Vertical Shaft Impactor Grade). (First Floor)

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-30 of trap/ granite/quartzite/ gneiss metal for Reinforced Cement Concrete Beams and Lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/ pumping, compaction and roughening the surface if special finish is to be provided and curing excetra complete. (Excluding reinforcement and structural steel), with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) excetra complete with fine aggregate (Crushed Sand Vertical Shaft Impactor Grade). (Second Floor)

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-30 of trap/ granite/quartzite/ gneiss metal for Reinforced Cement Concrete Beams and Lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/ pumping, compaction and roughening the surface if special finish is to be provided and curing excetra complete. (Excluding reinforcement and structural steel), with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) excetra complete with fine aggregate (Crushed Sand Vertical Shaft Impactor Grade). (Third Floor)

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-30 of trap/ granite/quartzite/ gneiss metal for Reinforced Cement Concrete Beams and Lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/ pumping, compaction and roughening the surface if special finish is to be provided and curing excetra complete. (Excluding reinforcement and structural steel), with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) excetra complete with fine aggregate (Crushed Sand Vertical Shaft Impactor Grade). (Fourth Floor)

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-30 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Slabs and Landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing excetra complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) excetra complete, with fine aggregate (Crushed Sand Vertical Shaft Impactor Grade). (Ground Floor)

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-30 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Slabs and Landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing excetra complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) excetra complete, with fine aggregate (Crushed Sand Vertical Shaft Impactor Grade). (First Floor)

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-30 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Slabs and Landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing excetra complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) excetra complete, with fine aggregate (Crushed Sand Vertical Shaft Impactor Grade). (Second Floor)

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-30 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Slabs and Landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing excetra complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) excetra complete, with fine aggregate (Crushed Sand Vertical Shaft Impactor Grade). (Third Floor)

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-30 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Slabs and Landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing excetra complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) excetra complete, with fine aggregate (Crushed Sand Vertical Shaft Impactor Grade). (Fourth Floor)

Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-25 of trap / quartzite /granite /gneiss metal for Reinforced Cement Concrete Waist Slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/ pumping, compaction, finishing uneven and honeycombed surface with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing excetra complete, with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) excetra complete, with fine aggregate (Crushed Sand Vertical Shaft Impactor Grade). (Excluding Reinforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin ). (Ground Floor)

Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-25 of trap / quartzite /granite /gneiss metal for Reinforced Cement Concrete Waist Slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/ pumping, compaction, finishing uneven and honeycombed surface with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing excetra complete, with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) excetra complete, with fine aggregate (Crushed Sand Vertical Shaft Impactor Grade). (Excluding Reinforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin ).(First Floor)

Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-25 of trap / quartzite /granite /gneiss metal for Reinforced Cement Concrete Waist Slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/ pumping, compaction, finishing uneven and honeycombed surface with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing excetra complete, with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) excetra complete, with fine aggregate (Crushed Sand Vertical Shaft Impactor Grade). (Excluding Reinforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin ). (Second Floor)

Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-25 of trap / quartzite /granite /gneiss metal for Reinforced Cement Concrete Waist Slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/ pumping, compaction, finishing uneven and honeycombed surface with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing excetra complete, with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) excetra complete, with fine aggregate (Crushed Sand Vertical Shaft Impactor Grade). (Excluding Reinforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin ). (Third Floor)

Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-25 of trap / quartzite /granite /gneiss metal for Reinforced Cement Concrete Waist Slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/ pumping, compaction, finishing uneven and honeycombed surface with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing excetra complete, with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) excetra complete, with fine aggregate (Crushed Sand Vertical Shaft Impactor Grade). (Excluding Reinforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin ). (Fourth Floor)

Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Pardi of required thickness including steel centering, formwork, cover blocks, laying/ pumping, compacting, curing, finishing and rougheningthem if special finish is to be provided and curing complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) excetra complete, with fine aggregate (Crushed Sand Vertical Shaft Impactor Grade). (Ground Floor)

Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Pardi of required thickness including steel centering, formwork, cover blocks, laying/ pumping, compacting, curing, finishing and rougheningthem if special finish is to be provided and curing complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) excetra complete, with fine aggregate (Crushed Sand Vertical Shaft Impactor Grade). (First Floor)

Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Pardi of required thickness including steel centering, formwork, cover blocks, laying/ pumping, compacting, curing, finishing and rougheningthem if special finish is to be provided and curing complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) excetra complete, with fine aggregate (Crushed Sand Vertical Shaft Impactor Grade). (Second Floor)

Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Pardi of required thickness including steel centering, formwork, cover blocks, laying/ pumping, compacting, curing, finishing and rougheningthem if special finish is to be provided and curing complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) excetra complete, with fine aggregate (Crushed Sand Vertical Shaft Impactor Grade). (Third Floor)

Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Pardi of required thickness including steel centering, formwork, cover blocks, laying/ pumping, compacting, curing, finishing and rougheningthem if special finish is to be provided and curing complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) excetra complete, with fine aggregate (Crushed Sand Vertical Shaft Impactor Grade). (Fourth Floor)

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Chajja as per detailed design and drawings including steel centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete (Excluding reinforcement and structural steel), with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) excetra complete, with fine aggregate (Crushed Sand Vertical Shaft Impactor Grade). (Ground Floor)

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Chajja as per detailed design and drawings including steel centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete (Excluding reinforcement and structural steel), with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) excetra complete, with fine aggregate (Crushed Sand Vertical Shaft Impactor Grade). (First Floor)

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Chajja as per detailed design and drawings including steel centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete (Excluding reinforcement and structural steel), with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) excetra complete, with fine aggregate (Crushed Sand Vertical Shaft Impactor Grade). (Second Floor)

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Chajja as per detailed design and drawings including steel centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete (Excluding reinforcement and structural steel), with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) excetra complete, with fine aggregate (Crushed Sand Vertical Shaft Impactor Grade). (Third Floor)

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Chajja as per detailed design and drawings including steel centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete (Excluding reinforcement and structural steel), with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) excetra complete, with fine aggregate (Crushed Sand Vertical Shaft Impactor Grade). (Fourth Floor)

Providing and fixing in position TMT FE -500 bar reinforcement of various diameters for Reinforced Cement Concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches excetra as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. (Ground Floor)

Providing and fixing in position TMT FE -500 bar reinforcement of various diameters for Reinforced Cement Concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches excetra as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. (First Floor)

Providing and fixing in position TMT FE -500 bar reinforcement of various diameters for Reinforced Cement Concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches excetra as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. (Second Floor)

Providing and fixing in position TMT FE -500 bar reinforcement of various diameters for Reinforced Cement Concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches excetra as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. (Third Floor)

Providing and fixing in position TMT FE -500 bar reinforcement of various diameters for Reinforced Cement Concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches excetra as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. (Fourth Floor)

Providing fly ash brick masonary with conventional /Indian Standard type fly ash bricks in cement mortar 1:6 in foundation and plinth including bailing out water manually, striking joints, racking out joints, watering and scaffolding complete.

Filling in plinth and floors with approved excavated materials in 15 centimetre to 20 cm layers including watering & compaction complete.

Filling in plinth and floors with contractors soil. Sand or murum materials in 15 centimetre to 20 centimetre layers including watering & compaction complete.

Providing dry trap rubble stone soling 15 centimetre to 20 centimetre thick including hand packing and compacting complete.

Providing fly ash brick masonary with conventional / Indian Standard type fly ash brick in cement mortar 1:6 for superstructure including striking joints, racking out joints, watering and scaffolding complete. (Ground Floor)

Providing fly ash brick masonary with conventional / Indian Standard type fly ash brick in cement mortar 1:6 for superstructure including striking joints, racking out joints, watering and scaffolding complete. (First Floor)

Providing fly ash brick masonary with conventional / Indian Standard type fly ash brick in cement mortar 1:6 for superstructure including striking joints, racking out joints, watering and scaffolding complete. (Second Floor)

Providing fly ash brick masonary with conventional / Indian Standard type fly ash brick in cement mortar 1:6 for superstructure including striking joints, racking out joints, watering and scaffolding complete. (Third Floor)

Providing fly ash brick masonary with conventional / Indian Standard type fly ash brick in cement mortar 1:6 for superstructure including striking joints, racking out joints, watering and scaffolding complete. (Fourth Floor)

Providing Second class fly ash brick masonry with conventional / Indian Standard type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 milimetre diameter/ two hoop iron strips 25 milimetre x 1.60 mm at every third course, properly bent and bounded at ends scaffolding raking out joints and watering excetra complete. (Ground Floor)

Providing Second class fly ash brick masonry with conventional /Indian Standard type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 milimetre diameter/ two hoop iron strips 25 milimetre x 1.60 milimetre at every third course, properly bent and bounded at ends scaffolding raking out joints and watering complete. (First Floor)

Providing Second class fly ash brick masonry with conventional / Indian Standard type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 milimetre diameter/ two hoop iron strips 25 milimetre x 1.60 mm at every third course, properly bent and bounded at ends scaffolding raking out joints and watering excetra complete. (Second Floor)

Providing Second class fly ash brick masonry with conventional / Indian Standard type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 milimetre diameter/ two hoop iron strips 25 milimetre x 1.60 mm at every third course, properly bent and bounded at ends scaffolding raking out joints and watering excetra complete. (Third Floor)

Providing Second class fly ash brick masonry with conventional / Indian Standard type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 milimetre diameter/ two hoop iron strips 25 milimetre x 1.60 mm at every third course, properly bent and bounded at ends scaffolding raking out joints and watering excetra complete. (Fourth Floor)

Providing internal cement plaster 12 milimitre thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing excetra complete. (Ground Floor)

Providing internal cement plaster 12 milimitre thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing excetra complete. (First Floor)

Providing internal cement plaster 12 milimitre thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing excetra complete. (Second Floor)

Providing internal cement plaster 12 milimitre thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing excetra complete. (Third Floor)

Providing internal cement plaster 12 milimitre thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing excetra complete. (Fourth Floor)

Providing and applying plaster with plaster of paris in 6 milimetre thickness to previously plastered surface in all position including preparing the surface scaffolding excetra complete. (Ground Floor)

Providing and applying plaster with plaster of paris in 6 milimetre thickness to previously plastered surface in all position including preparing the surface scaffolding excetra complete. (First Floor)

Providing and applying plaster with plaster of paris in 6 milimitre thickness to previously plastered surface in all position including preparing the surface scaffolding excetra complete. (Second Floor)

Providing and applying plaster with plaster of paris in 6 milimitre thickness to previously plastered surface in all position including preparing the surface scaffolding excetra complete. (Third Floor)

Providing and applying plaster with plaster of paris in 6 milimetre. thickness to previously plastered surface in all position including preparing the surface scaffolding excetra complete. (Fourth Floor)

Providing and applying gypsum plaster (with Gypsum material) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface/ or on newly brick surface (Excluding rough cast plaster) in all position including preparing and finishing the surface scaffolding excetra complete. (Ground Floor)

Providing and applying gypsum plaster (with Gypsum material) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface/ or on newly brick surface (Excluding rough cast plaster) in all position including preparing and finishing the surface scaffolding excetra complete. (First Floor)

Providing and applying gypsum plaster (with Gypsum material) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface/ or on newly brick surface (Excluding rough cast plaster) in all position including preparing and finishing the surface scaffolding excetra complete. (Second Floor)

Providing and applying gypsum plaster (with Gypsum material) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface/ or on newly brick surface (Excluding rough cast plaster) in all position including preparing and finishing the surface scaffolding excetra complete. (Third Floor)

Providing and applying gypsum plaster (with Gypsum material) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface/ or on newly brick surface (Excluding rough cast plaster) in all position including preparing and finishing the surface scaffolding excetra complete. (Fourth Floor)

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 milimetre thick in cement mortar 1:4 using waterproofing compound at 1 kilogram per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm. thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding excetracomplete. (Ground Floor)

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 milimetre thick in cement mortar 1:4 using waterproofing compound at 1 kilogram per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 milimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding excetra complete. (First Floor)

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 milimetre thick in cement mortar 1:4 using waterproofing compound at 1 kilogram per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 milimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding excetracomplete. (Second Floor)

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 milimetre thick in cement mortar 1:4 using waterproofing compound at 1 kilogram per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm. thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding excetracomplete. (Third Floor)

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 milimetre thick in cement mortar 1:4 using waterproofing compound at 1 kilogram per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm. thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding excetracomplete. (Fourth Floor)

Providing and applying Texture plaster with finishing with approved make with Purlina/ Rustic texture material (with texture material of Asian/ Renava/ Nitco/Temtex or equivalent company make) in 3 to 4 millimeter thickness on previously finished plastered surface ,including Plaster Groove 6 milimetre thickness or Tape Grooves 35 to 45 milimetre thickness or as required, in all position including preparing the surface scaffolding excetra complete. (Ground Floor)

Providing and applying Texture plaster with finishing with approved make with Purlina/ Rustic texture material (with texture material of Asian/ Renava/ Nitco/Temtex or equivalent company make) in 3 to 4 millimeter thickness on previously finished plastered surface ,including Plaster Groove 6 milimetre thickness or Tape Grooves 35 to 45 milimetre thickness or as required, in all position including preparing the surface scaffolding excetra complete. (First Floor)

Providing and applying Texture plaster with finishing with approved make with Purlina/ Rustic texture material (with texture material of Asian/ Renava/ Nitco/Temtex or equivalent company make) in 3 to 4 millimeter thickness on previously finished plastered surface ,including Plaster Groove 6 milimetre thickness or Tape Grooves 35 to 45 milimetre thickness or as required, in all position including preparing the surface scaffolding excetra complete. (Second Floor)

Providing and applying Texture plaster with finishing with approved make with Purlina/ Rustic texture material (with texture material of Asian/ Renava/ Nitco/Temtex or equivalent company make) in 3 to 4 millimeter thickness on previously finished plastered surface ,including Plaster Groove 6 milimetre thickness or Tape Grooves 35 to 45 milimetre thickness or as required, in all position including preparing the surface scaffolding excetra complete. (Third Floor)

Providing and applying Texture plaster with finishing with approved make with Purlina/ Rustic texture material (with texture material of Asian/ Renava/ Nitco/Temtex or equivalent company make) in 3 to 4 millimeter thickness on previously finished plastered surface ,including Plaster Groove 6 milimetre thickness or Tape Grooves 35 to 45 milimetre thickness or as required, in all position including preparing the surface scaffolding excetra complete. (Fourth Floor)

Providing and fixing chicken mesh of 22 gauge, with about 30 centimetre width at the junction of Reinforced Cement Concrete members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete/ Brick Burnt masonry and or tying by binding wire excetra complete. (Ground Floor)

Providing and fixing chicken mesh of 22 gauge, with about 30 centimetre width at the junction of Reinforce Cement Concrete members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete/ Burnt Brick Masonry and or tying by binding wire excetra complete. (First Floor)

Providing and fixing chicken mesh of 22 gauge, with about 30 centimetre width at the junction of Reinforced Cement Concrete members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete/ Brick Burnt masonry and or tying by binding wire excetra complete. (Second Floor)

Providing and fixing chicken mesh of 22 gauge, with about 30 centimetre width at the junction of Reinforced Cement Concrete members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete/ Brick Burnt masonry and or tying by binding wire excetra complete. (Third Floor)

Providing and fixing chicken mesh of 22 gauge, with about 30 centimetre width at the junction of Reinforced Cement Concrete members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete/ Brick Burnt masonry and or tying by binding wire excetra complete. (Fourth Floor)

Providing & applying washable oil bound distemper of approved colour and shade to old & new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) complete. (Ground Floor)

Providing & applying washable oil bound distemper of approved colour and shade to old & new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) complete. (First Floor)

Providing & applying washable oil bound distemper of approved colour and shade to old & new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) complete. (Second Floor)

Providing & applying washable oil bound distemper of approved colour and shade to old & new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) complete. (Third Floor)

Providing & applying washable oil bound distemper of approved colour and shade to old & new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) complete. (Fourth Floor)

Providing and applying impression 24 carrat Luxury paint of approved make & approved brand Emulsion paint to interior walls and ceilings of approved quality, colour and shade to new surface in two coats, including sub surface prparation by Acrylic putty and Acrylic primer coats including scaffolding, preparing the surface. excetra complete (Low Viscosity). (Ground Floor)

Providing and applying impression 24 carrat Luxury paint of approved make & approved brand Emulsion paint to interior walls and ceilings of approved quality, colour and shade to new surface in two coats, including sub surface prparation by Acrylic putty and Acrylic primer coats including scaffolding, preparing the surface. excetra complete (Low Viscosity). (First Floor)

Providing and applying impression 24 carrat Luxury paint of approved make & approved brand Emulsion paint to interior walls and ceilings of approved quality, colour and shade to new surface in two coats, including sub surface prparation by Acrylic putty and Acrylic primer coats including scaffolding, preparing the surface. excetra complete (Low Viscosity). (Second Floor)

Providing and applying impression 24 carrat Luxury paint of approved make & approved brand Emulsion paint to interior walls and ceilings of approved quality, colour and shade to new surface in two coats, including sub surface prparation by Acrylic putty and Acrylic primer coats including scaffolding, preparing the surface. excetra complete (Low Viscosity). (Third Floor)

Providing and applying impression 24 carrat Luxury paint of approved make & approved brand Emulsion paint to interior walls and ceilings of approved quality, colour and shade to new surface in two coats, including sub surface prparation by Acrylic putty and Acrylic primer coats including scaffolding, preparing the surface. excetra complete (Low Viscosity). (Fourth Floor)

Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases(NOx, VOC’s, CO, SOx, formaldehydes, excetra) in presence of natural or artificial light. It contains Graphene and nanoparticles of ium oxide. and Absorbs CO2 (4.8 kilogram /15 litre). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company technologist. (Ground Floor)

Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases(NOx, VOC’s, CO, SOx, formaldehydes, excetra) in presence of natural or artificial light. It contains Graphene and nanoparticles of ium oxide. and Absorbs CO2 (4.8 kilogram /15 litre). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company technologist. (First Floor)

Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases(NOx, VOC’s, CO, SOx, formaldehydes, excetra) in presence of natural or artificial light. It contains Graphene and nanoparticles of ium oxide. and Absorbs CO2 (4.8 kilogram /15 litre). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company technologist. (Second Floor)

Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases(NOx, VOC’s, CO, SOx, formaldehydes, excetra) in presence of natural or artificial light. It contains Graphene and nanoparticles of ium oxide. and Absorbs CO2 (4.8 kilogram /15 litre). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company technologist. (Third Floor)

Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases(NOx, VOC’s, CO, SOx, formaldehydes, excetra) in presence of natural or artificial light. It contains Graphene and nanoparticles of ium oxide. and Absorbs CO2 (4.8 kilogram /15 litre). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company technologist. (Fourth Floor)

Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in cement mortar1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with cement mortar1:3 admixed with approved water proofing compound and finally top finishing with average 20 milimitre thick layers of same mortar added with jute fiber at 1 Kilogram per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300 mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test excetra complete. (Fourth Floor)

Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 square metre per kilogram with two coats using Dr. Fixit or alike of chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers excetra complete. (Ground Floor)

Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 square metre per kilogram with two coats using Dr. Fixit or alike of chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers excetra complete. (First Floor)

Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 square metre per kilogram with two coats using Dr. Fixit or alike of chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers excetra complete. (Second Floor)

Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 sqare metre per kilogram with two coats using Dr. Fixit or alike of chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers excetra complete. (Third Floor)

Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 square metre per kilogram with two coats using Dr. Fixit or alike of chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers excetra complete. (Fourth Floor)

Providing water proof bedding for flooring of Bath and Water Closet 25 milimetre thick in cement mortar 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test excetra complete. (Ground Floor)

Providing water proof bedding for flooring of Bath and Water Closet 25 milimetre thick in cement mortar 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test excetra complete. (First Floor)

Providing water proof bedding for flooring of Bath and Water Closet 25 milimetre thick in cement mortar 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test excetra complete. (Second Floor)

Providing water proof bedding for flooring of bath and Water Closet, 25 milimetre thick in cement mortar 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test excetra complete. (Third Floor)

Providing water proof bedding for flooring of Bath and Water Closet 25 milimetre thick in cement mortar 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test excetra complete. (Fourth Floor)

Providing waterproofing in Water Closet and Bath including brick bat coba in all position including providing and laying 12 milimitre bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1kilogram per bag of cement laying brick bat coba of required thickness in cement mortar 1:5 with waterproofing compound 1 kilogram/bag of cement grouting and finishing the top layer with 20 milimetre thick brick bedding in cement mortar mortor 1:3 with waterproofing compound 1 kilogram per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing excetra complete. (Ground Floor)

Providing waterproofing in Water Closet and Bath including brick bat coba in all position including providing and laying 12 milimitre bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1kilogram per bag of cement laying brick bat coba of required thickness in cement mortar 1:5 with waterproofing compound 1 kilogram/bag of cement grouting and finishing the top layer with 20 milimetre thick brick bedding in cement mortar mortor 1:3 with waterproofing compound 1 kilogram per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing excetra complete. (First Floor)

Providing waterproofing in Water Closet and Bath including brick bat coba in all position including providing and laying 12 milimitre bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1kilogram per bag of cement laying brick bat coba of required thickness in cement mortar 1:5 with waterproofing compound 1 kilogram/bag of cement grouting and finishing the top layer with 20 milimetre thick brick bedding in cement mortar mortor 1:3 with waterproofing compound 1 kilogram per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing excetra complete. (Second Floor)

Providing waterproofing in Water Closet and bath including brick bat coba in all position including providing and laying 12 milimetre bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound at the rate of 1kilogram per bag of cement laying brick bat coba of required thickness in cement mortar 1:5 with waterproofing compound 1 kilogram per bag of cement grouting and finishing the top layer with 20 milimetre thick brick bedding in cement mortor 1:3 with waterproofing compound 1 kilogram per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing excetra complete. (Third Floor)

Providing waterproofing in Water Closet and Bath including brick bat coba in all position including providing and laying 12 milimitre bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1kilogram per bag of cement laying brick bat coba of required thickness in cement mortar 1:5 with waterproofing compound 1 kilogram/bag of cement grouting and finishing the top layer with 20 milimetre thick brick bedding in cement mortar mortor 1:3 with waterproofing compound 1 kilogram per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing excetra complete. (Fourth Floor)

Providing and laying polished Kotah stone flooring 25 milimetre to 30milimetre thick & of required width in plain/ diamond pattern on a bed of 1:6 cement mortar including cement float,filling joints with neat cement slurry,curing,polishing and cleaning complete. (Ground Floor)

Providing and laying polished Kotah stone flooring 25 milimetre to 30milimetre thick & of required width in plain/ diamond pattern on a bed of 1:6 cement mortar including cement float,filling joints with neat cement slurry,curing,polishing and cleaning complete. (First Floor)

Providing and laying polished Kotah stone flooring 25 milimetre to 30milimetre thick & of required width in plain/ diamond pattern on a bed of 1:6 cement mortar including cement float,filling joints with neat cement slurry,curing,polishing and cleaning complete. (Second Floor)

Providing and laying polished Kotah stone flooring 25 millimeter to 30 millimeter thick and of required width in plain/ diamond pattern on a bed of 1:6 cement mortar including cement float,filling joints with neat cement slurry,curing,polishing and cleaning complete. (Third Floor)

Providing and laying polished Kotah stone flooring 25 milimetre to 30milimetre thick & of required width in plain/ diamond pattern on a bed of 1:6 cement mortar including cement float,filling joints with neat cement slurry,curing,polishing and cleaning complete. (Fourth Floor)

Providing and fixing in required position skirting or dado of polished Kotah Stone slab 25 milimetre to 30 milimetre thick fixed on base on plaster of cement mortar 1:4 including cement float, filling joints with cement slurry, curing rubbing, polishing and cleaning complete. (Ground Floor)

Providing and fixing in required position skirting or dado of polished Kotah Stone slab 25 milimetre to 30 milimetre thick fixed on base on plaster of cement mortar 1:4 including cement float, filling joints with cement slurry, curing rubbing, polishing and cleaning complete. (First Floor)

Providing and fixing in required position skirting or dado of polished Kotah Stone slab 25 milimetre to 30 milimetre thick fixed on base on plaster of cement mortar 1:4 including cement float, filling joints with cement slurry, curing rubbing, polishing and cleaning complete. (Second Floor)

Providing and fixing in required position skirting or dado of polished Kotah Stone slab 25 milimetre to 30 milimetre thick fixed on base on plaster of cement mortar 1:4 including cement float, filling joints with cement slurry, curing rubbing, polishing and cleaning complete. (Third Floor)

Providing and fixing in required position skirting or dado of polished Kotah Stone slab 25 milimetre to 30 milimetre thick fixed on base on plaster of cement mortar 1:4 including cement float, filling joints with cement slurry, curing rubbing, polishing and cleaning complete. (Fourth Floor)

Providing and laying vitrified matt fininsh tiles for flooring having size 590 milimetre to 605 milimetre x to 605 milimetre of 8 to 10 milimetre thickness and confirming Indian Standard 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning excetra complete. (Ground Floor)

Providing and laying vitrified matt fininsh tiles for flooring having size 590 milimetre to 605 milimetre x to 605 milimetre of 8 to 10 milimetre thickness and confirming Indian Standard 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning excetra complete. (First Floor)

Providing and laying vitrified matt fininsh tiles for flooring having size 590 milimetre to 605 milimetre x to 605 milimetre of 8 to 10 milimetre thickness and confirming Indian Standard 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning excetra complete. (Second Floor)

Providing and laying vitrified matt fininsh tiles for flooring having size 590 milimetre to 605 milimetre of 8 to 10 milimetre thickness and confirming Indian Standard 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning excetra complete. (Third Floor)

Providing and laying vitrified matt fininsh tiles for flooring having size 590 milimetre to 605 milimetre x to 605 milimetre of 8 to 10 milimetre thickness and confirming Indian Standard 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning excetra complete. (Fourth Floor)

Providing and laying in position flooring of telephone black/ Amba White/ Cat bary brown/ Ruby red/ Ocean Brown granite stone of approved shade and size 18 milimitre to 20 milimitre thick on bed 1:6 cement mortar including cement floats striking joints, pointing in Cement Mortar 1:3 curing and cleaning excetra complete. (Ground Floor)

Providing and laying in position flooring of telephone black/ Amba White/ Cat bary brown/ Ruby red/ Ocean Brown granite stone of approved shade and size 18 milimitre to 20 milimitre thick on bed 1:6 cement mortar including cement floats striking joints, pointing in Cement Mortar 1:3 curing and cleaning excetra complete. (First Floor)

Providing and laying in position flooring of telephone black/ Amba White/ Cat bary brown/ Ruby red/ Ocean Brown granite stone of approved shade and size 18 milimitre to 20 milimitre thick on bed 1:6 cement mortar including cement floats striking joints, pointing in Cement Mortar 1:3 curing and cleaning excetra complete. (Second Floor)

Providing and laying in position flooring of telephone black/ Amba White/ Cat bary brown/ Ruby red/ Ocean Brown granite stone of approved shade and size 18 milimitre to 20 milimitre thick on bed 1:6 cement mortar including cement floats striking joints, pointing in Cement Mortar 1:3 curing and cleaning excetra complete. (Third Floor)

Providing and laying in position flooring of telephone black/ Amba White/ Cat bary brown/ Ruby red/ Ocean Brown granite stone of approved shade and size 18 milimitre to 20 milimitre thick on bed 1:6 cement mortar including cement floats striking joints, pointing in Cement Mortar 1:3 curing and cleaning excetra complete. (Fourth Floor)

Providing and fixing machine cut machine polished 18 milimitre to 20 milimitre thick telephone black/ Amba White/ Cat bary brown/ Ruby Red/ Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning excetra complete. (Ground Floor)

Providing and fixing machine cut machine polished 18 milimitre to 20 milimitre thick telephone black/ Amba White/ Cat bary brown/ Ruby Red/ Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning excetra complete. (First Floor)

Providing and fixing machine cut machine polished 18 milimetre to 20 milimetre thick telephone black/ Amba White/ Cat bary brown/ Ruby Red/ Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning excetra complete. (Second Floor)

Providing and fixing machine cut machine polished 18 milimitre to 20 milimitre thick telephone black/ Amba White/ Cat bary brown/ Ruby Red/ Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning excetra complete. (Third Floor)

Providing and fixing machine cut machine polished 18 milimitre to 20 milimitre thick telephone black/ Amba White/ Cat bary brown/ Ruby Red/ Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning excetra complete. (Fourth Floor)

Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing excetra complete. (Ground Floor)

Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing excetra complete. (First Floor)

Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing excetra complete. (Second Floor)

Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing excetra complete. (Third Floor)

Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing excetra complete. (Fourth Floor)

Providing and laying vitrified matt finish tiles for Skirting having size 590 milimetre to 605 milimetre x to 605 milimetre of 8 to 10 milimetre thick ness and confirming Indian Standard 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning excetra complete. (Ground Floor)

Providing and laying vitrified matt finish tiles for Skirting having size 590 milimetre to 605 milimetre x to 605 milimetre of 8 to 10 milimetre thick ness and confirming Indian Standard 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning excetra complete. (First Floor)

Providing and laying vitrified matt finish tiles for Skirting having size 590 milimetre to 605 milimetre x to 605 milimetre of 8 to 10 milimetre thick ness and confirming Indian Standard 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning excetra complete. (Second Floor)

Providing and laying vitrified matt finish tiles for Skirting having size 590 milimetre to 605 milimetre x to 605 milimetre of 8 to 10 milimetre thick ness and confirming Indian Standard 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning excetra complete. (Third Floor)

Providing and laying vitrified matt finish tiles for Skirting having size 590 milimetre to 605 milimetre x to 605 milimetre of 8 to 10 milimetre thick ness and confirming Indian Standard 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning excetra complete. (Fourth Floor)

Providing and laying ceramic tiles having size 30 centimetre x 60 centimetre for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing excetra complete. (Ground Floor)

Providing and laying ceramic tiles having size 30 centimetre x 60 centimetre for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing excetra complete. (First Floor)

Providing and laying ceramic tiles having size 30 centimetre x 60 centimetre for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing excetra complete. (Second Floor)

Providing and laying ceramic tiles having size 30 centimetre x 60 centimetre for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing excetra complete. (Third Floor)

Providing and laying ceramic tiles having size 30 centimetre x 60 centimetre for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing excetra complete. (Fourth Floor)

Providing and fixing solid core flush door shutter in double leaf 32 milimetre thick decorative type of exterior grade as per detailed drawings approved face veneers 3 milimetre thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish excetra complete. (Ground Floor)

Providing and fixing solid core flush door shutter in double leaf 32 milimetre thick decorative type of exterior grade as per detailed drawings approved face veneers 3 milimetre thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish excetra complete. (First Floor)

Providing and fixing solid core flush door shutter in double leaf 32 milimetre thick decorative type of exterior grade as per detailed drawings approved face veneers 3 milimetre thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish excetra complete. (Second Floor)

Providing and fixing solid core flush door shutter in double leaf 32 milimetre thick decorative type of exterior grade as per detailed drawings approved face veneers 3 milimetre thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish excetra complete. (Third Floor)

Providing and fixing solid core flush door shutter in double leaf 32 milimetre thick decorative type of exterior grade as per detailed drawings approved face veneers 3 milimetre thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish excetra complete. (Fourth Floor)

Providing and fixing solid core flush door shutter in single leaf 32 milimetre thick decorative type of exterior grade as per detailed drawings approved face veneers 3 milimetre thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish excetra complete. (Ground Floor)

Providing and fixing solid core flush door shutter in single leaf 32 milimetre thick decorative type of exterior grade as per detailed drawings approved face veneers 3 milimetre thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish excetra complete. (First Floor)

Providing and fixing solid core flush door shutter in single leaf 32 milimetre thick decorative type of exterior grade as per detailed drawings approved face veneers 3 milimetre thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish excetra complete. (Second Floor)

Providing and fixing solid core flush door shutter in single leaf 32 milimetre thick decorative type of exterior grade as per detailed drawings approved face veneers 3 milimetre thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish excetra complete. (Third Floor)

Providing and fixing solid core flush door shutter in single leaf 32 milimetre thick decorative type of exterior grade as per detailed drawings approved face veneers 3 milimetre thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish excetra complete. (Fourth Floor)

Providing and fixing fibre glass reinforced polyster door shutter 30 melimetre thick as per Indian Standard 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, excetra complete. (Ground Floor)

Providing and fixing fibre glass reinforced polyster door shutter 30 melimetre thick as per Indian Standard 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, excetra complete. (First Floor)

Providing and fixing fibre glass reinforced polyster door shutter 30 milimetre thick as per Indian Standard 14856 (2000) (reaffirmed 2006 ) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, complete. (Second Floor)

Providing and fixing fibre glass reinforced polyster door shutter 30 melimetre thick as per Indian Standard 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, excetra complete. (Third Floor)

Providing and fixing fibre glass reinforced polyster door shutter 30 melimetre thick as per Indian Standard 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, excetra complete. (Fourth Floor)

Providing & fixing factory-made Single leaf 2 hour fire rated door as per Indian Standard 3614 Part 2 & BS 476 Part 20 & 22, tested to UL 10 C and conforming to NFPA 80 , tested at NTL /CBRI/ARAI of Plain Steel finish type with a.) Frame of size 143x58 milimetre and thickness of 1.6 milimetre thick skin pass galvanized iron sheet (Confirm to Indian Standard 277 ) formed to single or double rebate profile b.) Shutter of 46 milimetre thick ness and constructed from 1.2 milimetre thick skin pas galvanized iron sheet (Confirm to Indian Standard 277) infill Rockwool / Mineral wool/ Honey comb craft paper c.) Vision glass of 5milimetre thick clear/wired glass Circular or Rectangular d.) Finish : Primed with zinc phosphate stoving primer and finished with Polyurethane aliphatic grade or epoxy paint as required of thickness 60 micron e.) Accessories : Min 8 Anchor fastener of HILTI make, min 3 SS Ball Bearing Butt Hinges, Mortise sash lock with lever handle, Mortise dead bolt , Mortise latch , Door closer and Flush bolts complete. (Ground Floor)

Providing & fixing factory-made Single leaf 2 hour fire rated door as per Indian Standard 3614 Part 2 & BS 476 Part 20 & 22, tested to UL 10 C and conforming to NFPA 80 , tested at NTL /CBRI/ARAI of Plain Steel finish type with a.) Frame of size 143x58 milimetre and thickness of 1.6 milimetre thick skin pass galvanized iron sheet (Confirm to Indian Standard 277 ) formed to single or double rebate profile b.) Shutter of 46 milimetre thick ness and constructed from 1.2 milimetre thick skin pas galvanized iron sheet (Confirm to Indian Standard 277) infill Rockwool / Mineral wool/ Honey comb craft paper c.) Vision glass of 5milimetre thick clear/wired glass Circular or Rectangular d.) Finish : Primed with zinc phosphate stoving primer and finished with Polyurethane aliphatic grade or epoxy paint as required of thickness 60 micron e.) Accessories : Min 8 Anchor fastener of HILTI make, min 3 SS Ball Bearing Butt Hinges, Mortise sash lock with lever handle, Mortise dead bolt , Mortise latch , Door closer and Flush bolts complete. (First Floor)

Providing & fixing factory-made Single leaf 2 hour fire rated door as per Indian Standard 3614 Part 2 & BS 476 Part 20 & 22, tested to UL 10 C and conforming to NFPA 80 , tested at NTL /CBRI/ARAI of Plain Steel finish type with a.) Frame of size 143x58 milimetre and thickness of 1.6 milimetre thick skin pass galvanized iron sheet (Confirm to Indian Standard 277 ) formed to single or double rebate profile b.) Shutter of 46 milimetre thick ness and constructed from 1.2 milimetre thick skin pas galvanized iron sheet (Confirm to Indian Standard 277) infill Rockwool / Mineral wool/ Honey comb craft paper c.) Vision glass of 5milimetre thick clear/wired glass Circular or Rectangular d.) Finish : Primed with zinc phosphate stoving primer and finished with Polyurethane aliphatic grade or epoxy paint as required of thickness 60 micron e.) Accessories : Min 8 Anchor fastener of HILTI make, min 3 SS Ball Bearing Butt Hinges, Mortise sash lock with lever handle, Mortise dead bolt , Mortise latch , Door closer and Flush bolts complete. (Second Floor)

Providing & fixing factory-made Single leaf 2 hour fire rated door as per Indian Standard 3614 Part 2 & BS 476 Part 20 & 22, tested to UL 10 C and conforming to NFPA 80 , tested at NTL /CBRI/ARAI of Plain Steel finish type with a.) Frame of size 143x58 milimetre and thickness of 1.6 milimetre thick skin pass galvanized iron sheet (Confirm to Indian Standard 277 ) formed to single or double rebate profile b.) Shutter of 46 milimetre thick ness and constructed from 1.2 milimetre thick skin pas galvanized iron sheet (Confirm to Indian Standard 277) infill Rockwool / Mineral wool/ Honey comb craft paper c.) Vision glass of 5milimetre thick clear/wired glass Circular or Rectangular d.) Finish : Primed with zinc phosphate stoving primer and finished with Polyurethane aliphatic grade or epoxy paint as required of thickness 60 micron e.) Accessories : Min 8 Anchor fastener of HILTI make, min 3 SS Ball Bearing Butt Hinges, Mortise sash lock with lever handle, Mortise dead bolt , Mortise latch , Door closer and Flush bolts complete. (Third Floor)

Providing & fixing factory-made Single leaf 2 hour fire rated door as per Indian Standard 3614 Part 2 & BS 476 Part 20 & 22, tested to UL 10 C and conforming to NFPA 80 , tested at NTL /CBRI/ARAI of Plain Steel finish type with a.) Frame of size 143x58 milimetre and thickness of 1.6 milimetre thick skin pass galvanized iron sheet (Confirm to Indian Standard 277 ) formed to single or double rebate profile b.) Shutter of 46 milimetre thick ness and constructed from 1.2 milimetre thick skin pas galvanized iron sheet (Confirm to Indian Standard 277) infill Rockwool / Mineral wool/ Honey comb craft paper c.) Vision glass of 5milimetre thick clear/wired glass Circular or Rectangular d.) Finish : Primed with zinc phosphate stoving primer and finished with Polyurethane aliphatic grade or epoxy paint as required of thickness 60 micron e.) Accessories : Min 8 Anchor fastener of HILTI make, min 3 SS Ball Bearing Butt Hinges, Mortise sash lock with lever handle, Mortise dead bolt , Mortise latch , Door closer and Flush bolts complete. (Fourth Floor)

Providing and fixing in position (as per Indian Standard 1868:1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 milimetre at weight 0.637 kilogram per Running metre with window frame bottom track section 92 x 31.75 x 1.30 melimetre at weight 1.070 kilogram per Running metre Top and side track section 92 x 31.75 x 1.30 melimetre at weight 0.933 kilogram per Running metre The shutter should be of bearing bottom 40 x 18 x 1.25 milimetre at weight 0.417 kilogram per Running metre Inter locking section 40 x 18 x 1.10 milimetre at weight 0.469 kilogram per Running metre and handle and top section 40 x 18 x 1.25 milimetre at weight o.417 kilogram per Running metre As per detailed drawings and as directed by Engineer-in-charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 milimetre thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts excetra complete with powder coating without box. (Ground Floor)

Providing and fixing in position (as per Indian Standard 1868:1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 milimetre at weight 0.637 kilogram per Running metre with window frame bottom track section 92 x 31.75 x 1.30 melimetre at weight 1.070 kilogram per Running metre Top and side track section 92 x 31.75 x 1.30 melimetre at weight 0.933 kilogram per Running metre The shutter should be of bearing bottom 40 x 18 x 1.25 milimetre at weight 0.417 kilogram per Running metre Inter locking section 40 x 18 x 1.10 milimetre at weight 0.469 kilogram per Running metre and handle and top section 40 x 18 x 1.25 milimetre at weight o.417 kilogram per Running metre As per detailed drawings and as directed by Engineer-in-charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 milimetre thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts excetra complete with powder coating without box. (First Floor)

Providing and fixing in position (as per Indian Standard 1868:1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 milimetre at weight 0.637 kilogram per running metre with window frame bottom track section 92 x 31.75 x 1.30 milimetre at weight 1.070 kilogram per running metre. Top and side track section 92 x 31.75 x 1.30 milimetre at weight 0.933 kilogram per running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 milimetre at weight 0.417 kilogram per running metre Inter locking section 40 x 18 x 1.10 milimetre at weight 0.469 kilogram per running metre and handle and top section 40 x 18 x 1.25 milimetre at weight o.417 kilogram per running metre. As per detailed drawings and as directed by Engineer-in-charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 milimetre thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts excetra complete with powder coating without box. (Second Floor)

Providing and fixing in position (as per Indian Standard 1868:1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 milimetre at weight 0.637 kilogram per Running metre with window frame bottom track section 92 x 31.75 x 1.30 melimetre at weight 1.070 kilogram per Running metre Top and side track section 92 x 31.75 x 1.30 melimetre at weight 0.933 kilogram per Running metre The shutter should be of bearing bottom 40 x 18 x 1.25 milimetre at weight 0.417 kilogram per Running metre Inter locking section 40 x 18 x 1.10 milimetre at weight 0.469 kilogram per Running metre and handle and top section 40 x 18 x 1.25 milimetre at weight o.417 kilogram per Running metre As per detailed drawings and as directed by Engineer-in-charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 milimetre thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts excetra complete with powder coating without box. (Third Floor)

Providing and fixing in position (as per Indian Standard 1868:1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 milimetre at weight 0.637 kilogram per Running metre with window frame bottom track section 92 x 31.75 x 1.30 melimetre at weight 1.070 kilogram per Running metre Top and side track section 92 x 31.75 x 1.30 melimetre at weight 0.933 kilogram per Running metre The shutter should be of bearing bottom 40 x 18 x 1.25 milimetre at weight 0.417 kilogram per Running metre Inter locking section 40 x 18 x 1.10 milimetre at weight 0.469 kilogram per Running metre and handle and top section 40 x 18 x 1.25 milimetre at weight o.417 kilogram per Running metre As per detailed drawings and as directed by Engineer-in-charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 milimetre thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts excetra complete with powder coating without box. (Fourth Floor)

Providing and fixing in position powder coated aluminium louvered windows/ ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 milimetre x 1.22 milimetre box type, 5 milimetre thick sheet glass louvers, of approved quality excetra complete. (Ground Floor)

Providing and fixing in position powder coated aluminium louvered windows/ ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 milimetre x 1.22 milimetre box type, 5 milimetre thick sheet glass louvers, of approved quality excetra complete. (First Floor)

Providing and fixing in position powder coated aluminium louvered windows/ ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 milimetre x 1.22 milimetre box type, 5 milimetre thick sheet glass louvers, of approved quality excetra complete. (Second Floor)

Providing and fixing in position powder coated aluminium louvered windows/ ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 milimetre x 1.22 milimetre box type, 5 milimetre thick sheet glass louvers, of approved quality excetra complete. (Third Floor)

Providing and fixing in position powder coated aluminium louvered windows/ ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 milimetre x 1.22 milimetre box type, 5 milimetre thick sheet glass louvers, of approved quality excetra complete. (Fourth Floor)

Providing and fixing during laying in Reinforced Cement Concrete Slab rectangular 2 milimetre thick Mild Steel sheet fan hook box of size 180 x 100 milimetre with required depth with holes or notches as required, bottom and top sides of 1.6 milimetre Mild Steel sheet fixed with 3.5 milimetre diametre round headed screws together with 12 milimitre diameter Mild Steel bar bent to shape with hooked ends for fan hook and painting to exposed surface. (Ground Floor)

Providing and fixing during laying in Reinforced Cement Concrete Slab rectangular 2 milimetre thick Mild Steel sheet fan hook box of size 180 x 100 milimetre with required depth with holes or notches as required, bottom and top sides of 1.6 milimetre Mild Steel sheet fixed with 3.5 milimetre diametre round headed screws together with 12 milimitre diameter Mild Steel bar bent to shape with hooked ends for fan hook and painting to exposed surface. (First Floor)

Providing and fixing during laying in Reinforced Cement Concrete Slab rectangular 2 milimetre thick Mild Steel sheet fan hook box of size 180 x 100 milimetre with required depth with holes or notches as required, bottom and top sides of 1.6 milimetre Mild Steel sheet fixed with 3.5 milimetre diameter round headed screws together with 12 milimetre diameter Mild Steel bar bent to shape with hooked ends for fan hook and painting to exposed surface. (Second Floor)

Providing and fixing during laying in Reinforced Cement Concrete Slab rectangular 2 milimetre thick Mild Steel sheet fan hook box of size 180 x 100 milimetre with required depth with holes or notches as required, bottom and top sides of 1.6 milimetre Mild Steel sheet fixed with 3.5 milimetre diametre round headed screws together with 12 milimitre diameter Mild Steel bar bent to shape with hooked ends for fan hook and painting to exposed surface. (Third Floor)

Providing and fixing during laying in Reinforced Cement Concrete Slab rectangular 2 milimetre thick Mild Steel sheet fan hook box of size 180 x 100 milimetre with required depth with holes or notches as required, bottom and top sides of 1.6 milimetre Mild Steel sheet fixed with 3.5 milimetre diametre round headed screws together with 12 milimitre diameter Mild Steel bar bent to shape with hooked ends for fan hook and painting to exposed surface. (Fourth Floor)

Providing and laying telephone black/ Amba White/ Cadburybrown/ Ruby red/ Ocean Brown granite stone of 18 to 20 milimetre thick for door frame/ dado/ window boxing excetra on Cement Mortar 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, excetra complete. (Ground Floor)

Providing and laying telephone black/ Amba White/ Cadburybrown/ Ruby red/ Ocean Brown granite stone of 18 to 20 milimetre thick for door frame/ dado/ window boxing excetra on Cement Mortar 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, excetra complete. (First Floor)

Providing and laying telephone black/ Amba White/ Cadburybrown/ Ruby red/ Ocean Brown granite stone of 18 to 20 milimetre thick for door frame/ dado/ window boxing excetra on Cement Mortar 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, excetra complete. (Second Floor)

Providing and laying telephone black/ Amba White/ Cadburybrown/ Ruby red/ Ocean Brown granite stone of 18 to 20 milimetre thick for door frame/ dado/ window boxing excetra on Cement Mortar 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, excetra complete. (Third Floor)

Providing and laying telephone black/ Amba White/ Cadburybrown/ Ruby red/ Ocean Brown granite stone of 18 to 20 milimetre thick for door frame/ dado/ window boxing excetra on Cement Mortar 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, excetra complete. (Fourth Floor)

Providing and fixing mild steel grill work for windows, ventilators excetra 20 kilogram per square metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. (Ground Floor)

Providing and fixing mild steel grill work for windows, ventilators excetra 20 kilogram per square metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. (First Floor)

Providing and fixing mild steel grill work for windows, ventilators 20 kilogram per square metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. (Second Floor)

Providing and fixing mild steel grill work for windows, ventilators excetra 20 kilogram per square metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. (Third Floor)

Providing and fixing mild steel grill work for windows, ventilators excetra 20 kilogram per square metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. (Fourth Floor)

Provinding and fixing aluminium grill diamond mesh type DG-202 of 7.5 milimetre thick including fixing in position anodised aluminium frame section of 80 x 38 milimetre x 1.22 milimetre size box, cutting to the required size with all wastage, labour, lead lift excetra complete. (Ground Floor)

Provinding and fixing aluminium grill diamond mesh type DG-202 of 7.5 milimetre thick including fixing in position anodised aluminium frame section of 80 x 38 milimetre x 1.22 milimetre size box, cutting to the required size with all wastage, labour, lead lift excetra complete. (First Floor)

Provinding and fixing aluminium grill diamond mesh type DG-202 of 7.5 milimetre thick including fixing in position anodised aluminium frame section of 80 x 38 milimetre x 1.22 milimetre size box, cutting to the required size with all wastage, labour, lead lift excetra complete. (Second Floor)

Provinding and fixing aluminium grill diamond mesh type DG-202 of 7.5 milimetre thick including fixing in position anodised aluminium frame section of 80 x 38 milimetre x 1.22 milimetre size box, cutting to the required size with all wastage, labour, lead lift excetra complete. (Third Floor)

Provinding and fixing aluminium grill diamond mesh type DG-202 of 7.5 milimetre thick including fixing in position anodised aluminium frame section of 80 x 38 milimetre x 1.22 milimetre size box, cutting to the required size with all wastage, labour, lead lift excetra complete. (Fourth Floor)

Providing and Fixing mat finish stainless steel (of 302 grade) railing with top pipe of 50 milimetre diameter and vertical pipe of 38 milimetre diameter at 0.60 metreetre center to center or as required and horizontal pipes of 25 milimetre diameter in three rows, all pipes of 2 milimetre thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 milimetre diameter above newel post of 75 milimetre diameter excetra complete (Prior approval of sample and brand by Executive Engineer is necessary before use). (Ground Floor)

Providing and Fixing mat finish stainless steel (of 302 grade) railing with top pipe of 50 milimetre diameter and vertical pipe of 38 milimetre diameter at 0.60 metreetre center to center or as required and horizontal pipes of 25 milimetre diameter in three rows, all pipes of 2 milimetre thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 milimetre diameter above newel post of 75 milimetre diameter excetra complete (Prior approval of sample and brand by Executive Engineer is necessary before use). (First Floor)

Providing and Fixing mat finish stainless steel (of 302 grade) railing with top pipe of 50 milimetre diameter and vertical pipe of 38 milimetre diameter at 0.60 metreetre center to center or as required and horizontal pipes of 25 milimetre diameter in three rows, all pipes of 2 milimetre thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 milimetre diameter above newel post of 75 milimetre diameter excetra complete (Prior approval of sample and brand by Executive Engineer is necessary before use). (Second Floor)

Providing and Fixing mat finish stainless steel (of 302 grade) railing with top pipe of 50 milimetre diameter and vertical pipe of 38 milimetre diameter at 0.60 metreetre center to center or as required and horizontal pipes of 25 milimetre diameter in three rows, all pipes of 2 milimetre thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 milimetre diameter above newel post of 75 milimetre diameter excetra complete (Prior approval of sample and brand by Executive Engineer is necessary before use). (Third Floor)

Providing and Fixing mat finish stainless steel (of 302 grade) railing with top pipe of 50 milimetre diameter and vertical pipe of 38 milimetre diameter at 0.60 metreetre center to center or as required and horizontal pipes of 25 milimetre diameter in three rows, all pipes of 2 milimetre thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 milimetre diameter above newel post of 75 milimetre diameter excetra complete (Prior approval of sample and brand by Executive Engineer is necessary before use). (Fourth Floor)

Providing and fixing 40 milimetre diameter and 1.5 milimetre thick Stainless steel hand railing in Stainless Steel 304 Grade including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe complete. (Ground Floor)

Providing and fixing 40 milimetre diameter and 1.5 milimetre thick stainless steel hand railing in Stainless Steel 304 Grade including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe excetra complete. (First Floor)

Providing and fixing 40 milimetre diameter and 1.5 milimetre thick stainless steel hand railing in Stainless Steel 304 Grade including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe excetra complete. (Second Floor)

Providing and fixing 40 milimetre diameter and 1.5 milimetre thick stainless steel hand railing in Stainless Steel 304 Grade including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe excetra complete. (Third Floor)

Providing and fixing 40 milimetre diameter and 1.5 milimetre thick stainless steel hand railing in Stainless Steel 304 Grade including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe excetra complete. (Fourth Floor)

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees excetra as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces excetra and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade excetra complete. (Ground Floor)

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees excetra as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted /bolted / welded connections without connecting plates, braces excetra and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade excetra complete. (First Floor)

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees excetra as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces excetra and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade excetra complete. (Second Floor)

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees excetra as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces excetra and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade excetra complete. (Third Floor)

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees excetra as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces excetra and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade excetra complete. (Fourth Floor)

Providing and fixing 20 to 25 milimetre thick rough shahabad box type waterproofing for basement or underground floor on a base of Cement concrete 1:3:6, including sub base of 2.50 centimeter thick cement mortar 1:3 with conceal, setcrete ( RMW ), Algae proof or other alike water proofing liquids, raking of joints upto 35 milimetre depth,filling the joints with 6 milimetre size crushed metal, hand grouting with cement slurry, curing and cleaning, with 7 years guarantee on court fee stamp of Rs. 100/- with ponding test etc complete. (excluding cement concrete 1:3:6 base concrete).

Providing and fixing 20 to 25 milimetre thick rough shahabad box type waterproofing treatment to vertical outside faces of Reinforced Cement concrete walls of basement or underground floor including filling the gap of 25 milimetre between rough shahabad and Reinforced Cement concrete walls with cement grout mixed with water proofing liquid Algae proof or other alike with one tile lift method, brushing the joints horizontally with cement slurry mixed with water proofing liquid for width 30 to 35 milimetre and sloping coping over topmost tile with cement mortar 1:3, butting the bottom most with Cement concrete 1:2:4 mixed with water proofing liquid, curing, with 7 years guarantee on court fee stamp of Rs. 100/- with ponding test etc complete. (excluding Cement concrtete 1:3:6 base concrete).

Supplying and fixing in position Colour Anodized Aluminium four track sliding windows with outer frame made from section of over all size 122 milimetre x 45 milimetre, bottom section with drain section track weighing 1.83 kilogram per metre and top and side section of size 122x 31.75 milimetre weighing 1.15 kilogram per running metre with shutter sections made of 18 milimetre x 40 milimetre size having average weight of 0.6 kilogram per running metre (or as required size) with change in proportionate weight, with 6 milimetre float glass in three equal panels and alluminium coated stainless steel mosquito net in one (2/3 of opening) panel fixed with new neoprene gasket, shutters to be provided with nylon encased stainless steel rollers, necessary locks and handles complete. (Ground Floor)

Supplying and fixing in position Colour Anodized Aluminium four track sliding windows with outer frame made from section of over all size 122 milimetre x 45 milimetre, bottom section with drain section track weighing 1.83 kilogram per metre and top and side section of size 122x 31.75 milimetre weighing 1.15 kilogram per running metre with shutter sections made of 18 milimetre x 40 milimetre size having average weight of 0.6 kilogram per running metre (or as required size) with change in proportionate weight, with 6 milimetre float glass in three equal panels and alluminium coated stainless steel mosquito net in one (2/3 of opening) panel fixed with new neoprene gasket, shutters to be provided with nylon encased stainless steel rollers, necessary locks and handles complete. (First Floor)

Supplying and fixing in position Colour Anodized Aluminium four track sliding windows with outer frame made from section of over all size 122 milimetre x 45 milimetre, bottom section with drain section track weighing 1.83 kilogram per metre and top and side section of size 122x 31.75 milimetre weighing 1.15 kilogram per running metre with shutter sections made of 18 milimetre x 40 milimetre size having average weight of 0.6 kilogram per running metre (or as required size) with change in proportionate weight, with 6 milimetre float glass in three equal panels and alluminium coated stainless steel mosquito net in one (2/3 of opening) panel fixed with new neoprene gasket, shutters to be provided with nylon encased stainless steel rollers, necessary locks and handles complete. (Second Floor)

Supplying and fixing in position Colour Anodized Aluminium four track sliding windows with outer frame made from section of over all size 122 milimetre x 45 milimetre, bottom section with drain section track weighing 1.83 kilogram per metre and top and side section of size 122x 31.75 milimetre weighing 1.15 kilogram per running metre with shutter sections made of 18 milimetre x 40 milimetre size having average weight of 0.6 kilogram per running metre (or as required size) with change in proportionate weight, with 6 milimetre float glass in three equal panels and alluminium coated stainless steel mosquito net in one (2/3 of opening) panel fixed with new neoprene gasket, shutters to be provided with nylon encased stainless steel rollers, necessary locks and handles complete. (Third Floor)

Providing and laying chequered tiles of approved quality of size 30 centimetre x 30 centimetre for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing excetra complete. (Ground Floor)

Providing and laying chequered tiles of approved quality of size 30 centimetre x 30 centimetre for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing excetra complete. (First Floor)

Providing and laying chequered tiles of approved quality of size 30 centimetre x 30 centimetre for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing excetra complete. (Second Floor)

Providing and laying chequered tiles of approved quality of size 30 centimetre x 30 centimetre for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing excetra complete. (Third Floor)

Providing and laying chequered tiles of approved quality of size 30 centimetre x 30 centimetre for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing excetra complete. (Fourth Floor)

Supplying and fixing of 6milimetre thick Exterior Compact Laminate or High Pressure Laminate of approved colour by approving authority with UV resistant Decorative colour paper on both side typically made out of multiple layers of craft papers and then impregnated with thermosetting phenolic resins, on top of it melamine treated barrier paper and decorative paper and wear layer on both the sides saturated with melamine resins and then covered with UV resistant acrylic resin layer which makes it extremely durable and weather resistant compressed together on extremely high pressure and hardened with electron beam curing to get the total desired thickness of 6mm matching European standard specification as per EN 438 -part 6, protected with 60 Micron protective peel-off film on both side which in no case leave any adhesive mark over the panel surface after it is peeled off. Fixing of the same to be done on a supporting frame of 50 milimetre X 5 milimetre X 3 milimetre powder coated aluminium box section to be spaced horizontally and vertically in 600 milimetre X 600 milimetre grid and fixed to building structure as per design through 50 milimetreX50 milimetreX 5 milimetre Mild Steel angle bracket prefixed to masonry slab or columns with Hilti make anchor fastener along with all related hardware and fixtures. The panel should then be fixed on the Aluminium section with the help of pure polyester exterior grade colour coating rivets as per architectural drawings or as directed by Engineer-in-charge. Each panel should be riveted on substructure maintaining a gap of 6mm on all the sides between each Panel for Air circulation and expansion and contraction as per installation specifications provided by the manufacturer. The cost shall include all expenses related to storage, material handling, lifting, freight, labour, scaffolding etc as directed by Engineer-in-charge. (Prior permission of S.E. is necessary before inclusion of this item in estimate). (Ground Floor)

Supplying and fixing of 6milimetre thick Exterior Compact Laminate or High Pressure Laminate of approved colour by approving authority with UV resistant Decorative colour paper on both side typically made out of multiple layers of craft papers and then impregnated with thermosetting phenolic resins, on top of it melamine treated barrier paper and decorative paper and wear layer on both the sides saturated with melamine resins and then covered with UV resistant acrylic resin layer which makes it extremely durable and weather resistant compressed together on extremely high pressure and hardened with electron beam curing to get the total desired thickness of 6mm matching European standard specification as per EN 438 -part 6, protected with 60 Micron protective peel-off film on both side which in no case leave any adhesive mark over the panel surface after it is peeled off. Fixing of the same to be done on a supporting frame of 50 milimetre X 5 milimetre X 3 milimetre powder coated aluminium box section to be spaced horizontally and vertically in 600 milimetre X 600 milimetre grid and fixed to building structure as per design through 50 milimetreX50 milimetreX 5 milimetre Mild Steel angle bracket prefixed to masonry slab or columns with Hilti make anchor fastener along with all related hardware and fixtures. The panel should then be fixed on the Aluminium section with the help of pure polyester exterior grade colour coating rivets as per architectural drawings or as directed by Engineer-in-charge. Each panel should be riveted on substructure maintaining a gap of 6mm on all the sides between each Panel for Air circulation and expansion and contraction as per installation specifications provided by the manufacturer. The cost shall include all expenses related to storage, material handling, lifting, freight, labour, scaffolding etc as directed by Engineer-in-charge. (Prior permission of S.E. is necessary before inclusion of this item in estimate). (First Floor)

Supplying and fixing of 6milimetre thick Exterior Compact Laminate or High Pressure Laminate of approved colour by approving authority with UV resistant Decorative colour paper on both side typically made out of multiple layers of craft papers and then impregnated with thermosetting phenolic resins, on top of it melamine treated barrier paper and decorative paper and wear layer on both the sides saturated with melamine resins and then covered with UV resistant acrylic resin layer which makes it extremely durable and weather resistant compressed together on extremely high pressure and hardened with electron beam curing to get the total desired thickness of 6mm matching European standard specification as per EN 438 -part 6, protected with 60 Micron protective peel-off film on both side which in no case leave any adhesive mark over the panel surface after it is peeled off. Fixing of the same to be done on a supporting frame of 50 milimetre X 5 milimetre X 3 milimetre powder coated aluminium box section to be spaced horizontally and vertically in 600 milimetre X 600 milimetre grid and fixed to building structure as per design through 50 milimetreX50 milimetreX 5 milimetre Mild Steel angle bracket prefixed to masonry slab or columns with Hilti make anchor fastener along with all related hardware and fixtures. The panel should then be fixed on the Aluminium section with the help of pure polyester exterior grade colour coating rivets as per architectural drawings or as directed by Engineer-in-charge. Each panel should be riveted on substructure maintaining a gap of 6mm on all the sides between each Panel for Air circulation and expansion and contraction as per installation specifications provided by the manufacturer. The cost shall include all expenses related to storage, material handling, lifting, freight, labour, scaffolding etc as directed by Engineer-in-charge. (Prior permission of S.E. is necessary before inclusion of this item in estimate) (Second Floor)

Supplying and fixing of 6milimetre thick Exterior Compact Laminate or High Pressure Laminate of approved colour by approving authority with UV resistant Decorative colour paper on both side typically made out of multiple layers of craft papers and then impregnated with thermosetting phenolic resins, on top of it melamine treated barrier paper and decorative paper and wear layer on both the sides saturated with melamine resins and then covered with UV resistant acrylic resin layer which makes it extremely durable and weather resistant compressed together on extremely high pressure and hardened with electron beam curing to get the total desired thickness of 6mm matching European standard specification as per EN 438 -part 6, protected with 60 Micron protective peel-off film on both side which in no case leave any adhesive mark over the panel surface after it is peeled off. Fixing of the same to be done on a supporting frame of 50 milimetre X 5 milimetre X 3 milimetre powder coated aluminium box section to be spaced horizontally and vertically in 600 milimetre X 600 milimetre grid and fixed to building structure as per design through 50 milimetreX50 milimetreX 5 milimetre Mild Steel angle bracket prefixed to masonry slab or columns with Hilti make anchor fastener along with all related hardware and fixtures. The panel should then be fixed on the Aluminium section with the help of pure polyester exterior grade colour coating rivets as per architectural drawings or as directed by Engineer-in-charge. Each panel should be riveted on substructure maintaining a gap of 6mm on all the sides between each Panel for Air circulation and expansion and contraction as per installation specifications provided by the manufacturer. The cost shall include all expenses related to storage, material handling, lifting, freight, labour, scaffolding etc as directed by Engineer-in-charge. (Prior permission of S.E. is necessary before inclusion of this item in estimate) (Third Floor)

Supplying and fixing of 6milimetre thick Exterior Compact Laminate or High Pressure Laminate of approved colour by approving authority with UV resistant Decorative colour paper on both side typically made out of multiple layers of craft papers and then impregnated with thermosetting phenolic resins, on top of it melamine treated barrier paper and decorative paper and wear layer on both the sides saturated with melamine resins and then covered with UV resistant acrylic resin layer which makes it extremely durable and weather resistant compressed together on extremely high pressure and hardened with electron beam curing to get the total desired thickness of 6mm matching European standard specification as per EN 438 -part 6, protected with 60 Micron protective peel-off film on both side which in no case leave any adhesive mark over the panel surface after it is peeled off. Fixing of the same to be done on a supporting frame of 50 milimetre X 5 milimetre X 3 milimetre powder coated aluminium box section to be spaced horizontally and vertically in 600 milimetre X 600 milimetre grid and fixed to building structure as per design through 50 milimetreX50 milimetreX 5 milimetre Mild Steel angle bracket prefixed to masonry slab or columns with Hilti make anchor fastener along with all related hardware and fixtures. The panel should then be fixed on the Aluminium section with the help of pure polyester exterior grade colour coating rivets as per architectural drawings or as directed by Engineer-in-charge. Each panel should be riveted on substructure maintaining a gap of 6mm on all the sides between each Panel for Air circulation and expansion and contraction as per installation specifications provided by the manufacturer. The cost shall include all expenses related to storage, material handling, lifting, freight, labour, scaffolding etc as directed by Engineer-in-charge. (Prior permission of S.E. is necessary before inclusion of this item in estimate) (Fourth Floor)

Providing and fixing false ceiling with eco-friendly light-weight calcium silicate tiles of spintone surface texture “aerolite” make or equivalent of size 595 milimetre x 595 milimetre having 15 milimetre thick densified micro look edge and 100% humidity resistance incombustible as per BS 46 part IV and thermal conductivity 0.043 w/m 0 KC and NRC 0.50 placed in true horizontal level suspended grid of size 600 x600 milimetre made from hot dipped Galvanized Iron steel sections ion silhouette profile, rotary stitched double webbed white with 6mm reveal profile (white/black), wherein, main “T” runner of size 42 milimetrex14 milimetre between main 'T' 600 milimetre center-tocenter and secondary cross “T” of size 33x14x0.43 milimetre thick of length 600 milimetre long spaced inter-locked at middle of the first crossed “T” in each panel to form grid of 1200 mmx600 milimetre resting on periphery wall Profile wall section 19 milimetre (7+7) x 19 milimetre x 0.40 thicknesses and laying false ceiling for services like diffusers grills including cutting, making opening for light fittings, fixtures, smoke detectors excetra, wherever required. Main “T” runners suspended from ceiling with using Galvanized Iron soffit cleats of size 25x35x1.6 milimetre of required length fixed to the ceiling with 6 milimetre dia and 50 milimetre long dash fastener, 4 milimetre diametre Galvanized Iron adjustable rods with powder-coated/ good quality Galvanized Iron level adjustment clips of 35x35x0.8 mm spaced @1200, center-to-center along main “T” all complete at all heights as per the specifications, drawings and as per the directions of Engineer-in-charge. (Ground Floor)

Providing and fixing false ceiling with eco-friendly light-weight calcium silicate tiles of spintone surface texture “aerolite” make or equivalent of size 595 milimetre x 595 milimetre having 15 milimetre thick densified micro look edge and 100% humidity resistance incombustible as per BS 46 part IV and thermal conductivity 0.043 w/m 0 KC and NRC 0.50 placed in true horizontal level suspended grid of size 600 x600 milimetre made from hot dipped Galvanized Iron steel sections ion silhouette profile, rotary stitched double webbed white with 6mm reveal profile (white/black), wherein, main “T” runner of size 42 milimetrex14 milimetre between main 'T' 600 milimetre center-tocenter and secondary cross “T” of size 33x14x0.43 milimetre thick of length 600 milimetre long spaced inter-locked at middle of the first crossed “T” in each panel to form grid of 1200 mmx600 milimetre resting on periphery wall Profile wall section 19 milimetre (7+7) x 19 milimetre x 0.40 thicknesses and laying false ceiling for services like diffusers grills including cutting, making opening for light fittings, fixtures, smoke detectors excetra, wherever required. Main “T” runners suspended from ceiling with using Galvanized Iron soffit cleats of size 25x35x1.6 milimetre of required length fixed to the ceiling with 6 milimetre dia and 50 milimetre long dash fastener, 4 milimetre diametre Galvanized Iron adjustable rods with powder-coated/ good quality Galvanized Iron level adjustment clips of 35x35x0.8 mm spaced @1200, center-to-center along main “T” all complete at all heights as per the specifications, drawings and as per the directions of Engineer-in-charge. (First Floor)

Providing and fixing false ceiling with eco-friendly light-weight calcium silicate tiles of spintone surface texture “aerolite” make or equivalent of size 595 milimetre x 595 milimetre having 15 milimetre thick densified micro look edge and 100% humidity resistance incombustible as per BS 46 part IV and thermal conductivity 0.043 w/m 0 KC and NRC 0.50 placed in true horizontal level suspended grid of size 600 x600 milimetre made from hot dipped Galvanized Iron steel sections ion silhouette profile, rotary stitched double webbed white with 6mm reveal profile (white/black), wherein, main “T” runner of size 42 milimetrex14 milimetre between main 'T' 600 milimetre center-tocenter and secondary cross “T” of size 33x14x0.43 milimetre thick of length 600 milimetre long spaced inter-locked at middle of the first crossed “T” in each panel to form grid of 1200 mmx600 milimetre resting on periphery wall Profile wall section 19 milimetre (7+7) x 19 milimetre x 0.40 thicknesses and laying false ceiling for services like diffusers grills including cutting, making opening for light fittings, fixtures, smoke detectors excetra, wherever required. Main “T” runners suspended from ceiling with using Galvanized Iron soffit cleats of size 25x35x1.6 milimetre of required length fixed to the ceiling with 6 milimetre dia and 50 milimetre long dash fastener, 4 milimetre diametre Galvanized Iron adjustable rods with powder-coated/ good quality Galvanized Iron level adjustment clips of 35x35x0.8 mm spaced @1200, center-to-center along main “T” all complete at all heights as per the specifications, drawings and as per the directions of Engineer-in-charge. (Second Floor)

Providing and fixing false ceiling with eco-friendly light-weight calcium silicate tiles of spintone surface texture “aerolite” make or equivalent of size 595 milimetre x 595 milimetre having 15 milimetre thick densified micro look edge and 100% humidity resistance incombustible as per BS 46 part IV and thermal conductivity 0.043 w/m 0 KC and NRC 0.50 placed in true horizontal level suspended grid of size 600 x600 milimetre made from hot dipped Galvanized Iron steel sections ion silhouette profile, rotary stitched double webbed white with 6mm reveal profile (white/black), wherein, main “T” runner of size 42 milimetrex14 milimetre between main 'T' 600 milimetre center-tocenter and secondary cross “T” of size 33x14x0.43 milimetre thick of length 600 milimetre long spaced inter-locked at middle of the first crossed “T” in each panel to form grid of 1200 mmx600 milimetre resting on periphery wall Profile wall section 19 milimetre (7+7) x 19 milimetre x 0.40 thicknesses and laying false ceiling for services like diffusers grills including cutting, making opening for light fittings, fixtures, smoke detectors excetra, wherever required. Main “T” runners suspended from ceiling with using Galvanized Iron soffit cleats of size 25x35x1.6 milimetre of required length fixed to the ceiling with 6 milimetre dia and 50 milimetre long dash fastener, 4 milimetre diametre Galvanized Iron adjustable rods with powder-coated/ good quality Galvanized Iron level adjustment clips of 35x35x0.8 mm spaced @1200, center-to-center along main “T” all complete at all heights as per the specifications, drawings and as per the directions of Engineer-in-charge. (Third Floor)

Providing and fixing false ceiling with eco-friendly light-weight calcium silicate tiles of spintone surface texture “aerolite” make or equivalent of size 595 milimetre x 595 milimetre having 15 milimetre thick densified micro look edge and 100% humidity resistance incombustible as per BS 46 part IV and thermal conductivity 0.043 w/m 0 KC and NRC 0.50 placed in true horizontal level suspended grid of size 600 x600 milimetre made from hot dipped Galvanized Iron steel sections ion silhouette profile, rotary stitched double webbed white with 6mm reveal profile (white/black), wherein, main “T” runner of size 42 milimetrex14 milimetre between main 'T' 600 milimetre center-tocenter and secondary cross “T” of size 33x14x0.43 milimetre thick of length 600 milimetre long spaced inter-locked at middle of the first crossed “T” in each panel to form grid of 1200 mmx600 milimetre resting on periphery wall Profile wall section 19 milimetre (7+7) x 19 milimetre x 0.40 thicknesses and laying false ceiling for services like diffusers grills including cutting, making opening for light fittings, fixtures, smoke detectors excetra, wherever required. Main “T” runners suspended from ceiling with using Galvanized Iron soffit cleats of size 25x35x1.6 milimetre of required length fixed to the ceiling with 6 milimetre dia and 50 milimetre long dash fastener, 4 milimetre diametre Galvanized Iron adjustable rods with powder-coated/ good quality Galvanized Iron level adjustment clips of 35x35x0.8 mm spaced @1200, center-to-center along main “T” all complete at all heights as per the specifications, drawings and as per the directions of Engineer-in-charge. (Fourth Floor)

Providing and fixing in position Gypsum board false ceiling with 12.5 milimetre thick Gypsum boards, screwed/ fixed to the under structure of suspended galvanised iron Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 milimetre maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts excetra all complete. (Ground Floor)

Providing and fixing in position Gypsum board false ceiling with 12.5 milimetre thick Gypsum boards, screwed/ fixed to the under structure of suspended galvanised iron Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 milimetre maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts excetra all complete. (First Floor)

Providing and fixing in position Gypsum board false ceiling with 12.5 milimetre thick Gypsum boards, screwed/ fixed to the under structure of suspended galvanised iron Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 milimetre maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts excetra all complete. (Second Floor)

Providing and fixing in position Gypsum board false ceiling with 12.5 milimetre thick Gypsum boards, screwed/ fixed to the under structure of suspended galvanised iron Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 milimetre maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts excetra all complete. (Third Floor)

Providing and fixing in position Gypsum board false ceiling with 12.5 milimetre thick Gypsum boards, screwed/ fixed to the under structure of suspended galvanised iron Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 milimetre maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts excetra all complete. (Fourth Floor)

Providing and fixing in position, Single shuttered aluminium extruded powder coated openable door of overall size 0.90 metre x 2.40 metre with aluminium door frame of powder coated section 101.60 x 44.75 milimetre, 3.18 milimetre thick and shutter comprising of powder coated section having bottom and lock rail of size 150 milimetre x 44.5 milimetre, 2.90 milimetre thick top rails 47.62 x 44.45 milimetre, 3.18 milimetre thick , vertical style 47.62 x 44.45 milimetre, 3.00 milimetre thick and for shutter plain glass panes 5 milimetre thick for top panels and 12 milimetre thick both side laminated phenol bonded particle board panels for bottom panels excetra, Indian Standard Institution mark, heavy duty, Hydraulic floor spring of 150 kilogram capacity, having heavy duty concealed lock, necessary beeding, glazing clips, Polyvinyl Chloride gaskets, 250 milimetre length tower bolts, 150 milimetre diameter pad handle, excetra as per detailed design and drawing or as directed by engineer in charge including all materials, labours, and equipments excetra (Ground Floor)

Providing and fixing in position, Single shuttered aluminium extruded powder coated openable door of overall size 0.90 metre x 2.40 metre with aluminium door frame of powder coated section 101.60 x 44.75 milimetre, 3.18 milimetre thick and shutter comprising of powder coated section having bottom and lock rail of size 150 milimetre x 44.5 milimetre, 2.90 milimetre thick top rails 47.62 x 44.45 milimetre, 3.18 milimetre thick , vertical style 47.62 x 44.45 milimetre, 3.00 milimetre thick and for shutter plain glass panes 5 milimetre thick for top panels and 12 milimetre thick both side laminated phenol bonded particle board panels for bottom panels excetra, Indian Standard Institution mark, heavy duty, Hydraulic floor spring of 150 kilogram capacity, having heavy duty concealed lock, necessary beeding, glazing clips, Polyvinyl Chloride gaskets, 250 milimetre length tower bolts, 150 milimetre diameter pad handle, excetra as per detailed design and drawing or as directed by engineer in charge including all materials, labours, and equipments excetra (First Floor)

Providing and fixing in position, Single shuttered aluminium extruded powder coated openable door of overall size 0.90 metre x 2.40 metre with aluminium door frame of powder coated section 101.60 x 44.75 milimetre, 3.18 milimetre thick and shutter comprising of powder coated section having bottom and lock rail of size 150 milimetre x 44.5 milimetre, 2.90 milimetre thick top rails 47.62 x 44.45 milimetre, 3.18 milimetre thick , vertical style 47.62 x 44.45 milimetre, 3.00 milimetre thick and for shutter plain glass panes 5 milimetre thick for top panels and 12 milimetre thick both side laminated phenol bonded particle board panels for bottom panels excetra, Indian Standard Institution mark, heavy duty, Hydraulic floor spring of 150 kilogram capacity, having heavy duty concealed lock, necessary beeding, glazing clips, Polyvinyl Chloride gaskets, 250 milimetre length tower bolts, 150 milimetre diameter pad handle, excetra as per detailed design and drawing or as directed by engineer in charge including all materials, labours, and equipments excetra (Second Floor)

Providing and fixing in position, Single shuttered aluminium extruded powder coated openable door of overall size 0.90 metre x 2.40 metre with aluminium door frame of powder coated section 101.60 x 44.75 milimetre, 3.18 milimetre thick and shutter comprising of powder coated section having bottom and lock rail of size 150 milimetre x 44.5 milimetre, 2.90 milimetre thick top rails 47.62 x 44.45 milimetre, 3.18 milimetre thick , vertical style 47.62 x 44.45 milimetre, 3.00 milimetre thick and for shutter plain glass panes 5 milimetre thick for top panels and 12 milimetre thick both side laminated phenol bonded particle board panels for bottom panels excetra, Indian Standard Institution mark, heavy duty, Hydraulic floor spring of 150 kilogram capacity, having heavy duty concealed lock, necessary beeding, glazing clips, Polyvinyl Chloride gaskets, 250 milimetre length tower bolts, 150 milimetre diameter pad handle, excetra as per detailed design and drawing or as directed by engineer in charge including all materials, labours, and equipments excetra (Third Floor)

Providing and fixing in position, Single shuttered aluminium extruded powder coated openable door of overall size 0.90 metre x 2.40 metre with aluminium door frame of powder coated section 101.60 x 44.75 milimetre, 3.18 milimetre thick and shutter comprising of powder coated section having bottom and lock rail of size 150 milimetre x 44.5 milimetre, 2.90 milimetre thick top rails 47.62 x 44.45 milimetre, 3.18 milimetre thick , vertical style 47.62 x 44.45 milimetre, 3.00 milimetre thick and for shutter plain glass panes 5 milimetre thick for top panels and 12 milimetre thick both side laminated phenol bonded particle board panels for bottom panels excetra, Indian Standard Institution mark, heavy duty, Hydraulic floor spring of 150 kilogram capacity, having heavy duty concealed lock, necessary beeding, glazing clips, Polyvinyl Chloride gaskets, 250 milimetre length tower bolts, 150 milimetre diameter pad handle, excetra as per detailed design and drawing or as directed by engineer in charge including all materials, labours, and equipments excetra (Fourth Floor)

Providing structural steel work in hollow section of various thickness and sizes in square, rectanular and round shape from 25 milimetre to 450 milimetre section as per Indian Standard 4923 YST 310 Grade produced from iron ore and blast furnace route excetra as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/welded connections and painting complete. (Ground Floor)

Providing structural steel work in hollow section of various thickness and sizes in square, rectanular and round shape from 25 milimetre to 450 milimetre section as per Indian Standard 4923 YST 310 Grade produced from iron ore and blast furnace route excetra as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/welded connections and painting complete. (First Floor)

Providing structural steel work in hollow section of various thickness and sizes in square, rectanular and round shape from 25 milimetre to 450 milimetre section as per Indian Standard 4923 YST 310 Grade produced from iron ore and blast furnace route excetra as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/welded connections and painting complete. (Second Floor)

Providing structural steel work in hollow section of various thickness and sizes in square, rectanular and round shape from 25 milimetre to 450 milimetre section as per Indian Standard 4923 YST 310 Grade produced from iron ore and blast furnace route excetra as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/welded connections and painting complete. (Third Floor)

Providing structural steel work in hollow section of various thickness and sizes in square, rectanular and round shape from 25 milimetre to 450 milimetre section as per Indian Standard 4923 YST 310 Grade produced from iron ore and blast furnace route excetra as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/welded connections and painting complete. (Fourth Floor)

Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gram / square metre total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 milimetre Base Metal Thickness ( BMT ) (0.5 milimetre TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 micrometre exterior coat on top surface and nominal 10 micrometre reverse coat on back surface. Profile sheet shall have nom. 950-1050 milimetre effective cover width and nominal 25-30 milimetre deep ribs with subtle square fluting in the five pan at nominal 180-250 milimetre center-to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 micrometre Zinc-Tin alloy coated, Hex head, self-drilling screw excetra complete. (weight of profile 4.52 kilogram per square metre). (Ground Floor)

Providing and fixing of colour coated Zincaluminium( R ) AZ150 ( min 150 gram / square metre total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 milimetre Base Metal Thickness ( BMT ) (0.5 milimetre TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated withAluminium-Zinc alloy (55% aluminiumm 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyster paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 milimetre, comprising of nominal 25 milimetreexterior coat on top surface and nominal 10 micrometre reverse coat on back surface. Profile sheet shall have nom. 950-1050 milimetre effective cover width and nominal 25-30 milimetre deep ribs with sublet square fluting in the five pan at nominal 180-250 milimetrecenter-to-center. The end rib shall be designed for anti-capacity groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. including fasteners with min. fastened with min. 25 micrometre Zinc-Tin alloy coated, Hex head, self-drilling screw excetra complete. (weight of profile 4.52 kilogram per square metre) 600 milimetre girth (Surface Width). (First Floor)

Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/ structure, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40 milimetre diameter Mild Steel tube, placed 1.5 metre centre to centre, horizontal and vertical tubes joint with cup and lock system with Mild Steel Tubes, Mild Steel tube challis, Mild Steel clamps and staircase system in the scaffolding for working platform excetra and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen excetra, complete as per directions and approval of Engineer-in-charge. Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works. (Fourth Floor)

Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-15 of trap/ granite/ quartzite/ gneiss metal for plain or molded sills, cornice, jambs, block in course, or architraves of required size and shapes including steel centering, plywood/ steel formwork, laying/ pumping, compacting, roughening them if special finish is to be provided,finishing uneven and honeycombed surface and curing excetra complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin excetra (Wooden centering will not be allowed.) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled Reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With fine aggregate (Crushed Sand Vertical Shaft Impactor Grade). (Ground Floor)

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-15 of trap/ granite/ quartzite/ gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing excetra complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin excetra (Wooden centering will not be allowed). With fine aggregate (Crushed Sand Vertical Shaft Impactor Grade). (Ground Floor)

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-15 of trap/ granite/ quartzite/ gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing excetra complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin excetra (Wooden centering will not be allowed). With fine aggregate (Crushed Sand Vertical Shaft Impactor Grade). (First Floor)

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-15 of trap/ granite/ quartzite/ gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing excetra complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin excetra (Wooden centering will not be allowed). With fine aggregate (Crushed Sand Vertical Shaft Impactor Grade). (Second Floor)

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-15 of trap/ granite/ quartzite/ gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing excetra complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin excetra (Wooden centering will not be allowed). With fine aggregate (Crushed Sand Vertical Shaft Impactor Grade). (Third Floor)

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-15 of trap/ granite/ quartzite/ gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing excetra complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin excetra (Wooden centering will not be allowed). With fine aggregate (Crushed Sand Vertical Shaft Impactor Grade). (Fourth Floor)

Providing and laying in situ/ Ready Mix cement concrete Mix-20 of trap/ granite/quartzite/ gneiss metal for Reinforced Cement Concrete work in foundations like raft, strip foundations, grillage and footings of Reinforced Cement Concrete columns and steel stanchions excetra including bailing out water, steel centering formwork, laying/ pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided, (Excluding reinforcement and structural steel) excetra complete, with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) excetra complete, with fine aggregate (Crushed Sand Vertical Shaft Impactor Grade). (Ground Floor)

Providing and laying cast in situ/ Ready Mix cement concrete Mix-20 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing excetra complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) excetra complete with fine aggregate (Crushed Sand Vertical Shaft Impactor Grade). (Ground Floor)

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-20 of trap/ granite/quartzite/ gneiss metal for Reinforced Cement Concrete Beams and Lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/ pumping, compaction and roughening the surface if special finish is to be provided and curing excetra complete. (Excluding reinforcement and structural steel), with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) excetra complete with fine aggregate (Crushed Sand Vertical Shaft Impactor Grade). (Ground Floor)

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-20 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Slabs and Landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing excetra complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) excetra complete, with fine aggregate (Crushed Sand Vertical Shaft Impactor Grade). (Ground Floor)

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-20 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Chajja as per detailed design and drawings including steel centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete (Excluding reinforcement and structural steel), with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) excetra complete, with fine aggregate (Crushed Sand Vertical Shaft Impactor Grade). (Ground Floor)

Providing Autoclaved Areated Concrete block masonary of Ecolite or equivalent make conforming to Indian Standard:2185(Part 3)- 1984 in extra fine jointing mortor of fixoblock of UltraTech or equivalent in superstructure including striking joints, racking out joints watering and scaffolding excetra complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972)

Providing Autoclaved Aerated Concrete Block masonary of conforming to Indian Standard:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in Half brick thick wall including striking joints, raking out joints and scaffolding excetra Complete. (The test shall be carried out conforming to Indian Standard:6441 (Part I) - 1972)

Providing patti/ band 75 milimetre wide on plastered surface 12 milimetre to 15 milimetre thick in cement mortar 1:3 line and level including neat finishing scaffolding curing excetra complete. (Ground Floor)

Providing patti/ band 75 milimetre wide on plastered surface 12 milimitre to 15 milimetre thick in cement mortar 1:3 line and level including neat finishing scaffolding curing excetra complete. (First Floor)

Providing patti/ band 75 milimetre wide on plastered surface 12 milimitre to 15 milimetre thick in cement mortar 1:3 line and level including neat finishing scaffolding curing excetra complete. (Second Floor)

Providing patti/ band 75 milimetre wide on plastered surface 12 milimitre to 15 milimetre thick in cement mortar 1:3 line and level including neat finishing scaffolding curing excetra complete. (Third Floor)

Providing patti/ band 75 milimetre wide on plastered surface 12 milimitre to 15 milimetre thick in cement mortar 1:3 line and level including neat finishing scaffolding curing excetra complete. (Fourth Floor)

Providing patti/ band 100 milimetre wide on plastered surface 12 milimitre to 15 milimetre thick in cement mortar 1:3 line and level including neat finishing scaffolding curing excetra complete. (Ground Floor)

Providing patti/ band 100 milimetre wide on plastered surface 12 milimitre to 15 milimetre thick in cement mortar 1:3 line and level including neat finishing scaffolding curing excetra complete. (First Floor)

Providing patti/ band 100 milimetre wide on plastered surface 12 milimitre to 15 milimetre thick in cement mortar 1:3 line and level including neat finishing scaffolding curing excetra complete. (Second Floor)

Providing patti/ band 100 milimetre wide on plastered surface 12 milimitre to 15 milimetre thick in cement mortar 1:3 line and level including neat finishing scaffolding curing excetra complete. (Third Floor)

Providing patti/ band 100 milimetre wide on plastered surface 12 milimitre to 15 milimetre thick in cement mortar 1:3 line and level including neat finishing scaffolding curing excetra complete. (Fourth Floor)

Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 milimetre x 450 milimetre size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 milimetre thick supports with kadappah top 35 to 40 milimetre thick and polished granite 16 to 20 milimitre top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 centimetre height and top granite of 75 x 40 centimetre including cutting, opening for sink of required size in kadappah as well as granite excetra complete. Platform top size 5.00 metre x 0.60 metre and height is 0.75 metre) (Ground Floor)

Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 milimetre x 450 milimetre size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 milimetre thick supports with kadappah top 35 to 40 milimetre thick and polished granite 16 to 20 milimitre top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 centimetre height and top granite of 75 x 40 centimetre including cutting, opening for sink of required size in kadappah as well as granite excetra complete. (Platform top size 5.00 metre x 0.60 metre and height is 0.75 metre) (First Floor)

Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 milimetre x 450 milimetre size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 milimetre thick supports with kadappah top 35 to 40 milimetre thick and polished granite 16 to 20 milimitre top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 centimetre height and top granite of 75 x 40 centimetre including cutting, opening for sink of required size in kadappah as well as granite excetra complete. (Platform top size 5.00 metre x 0.60 metre and height is 0.75 metre) (Second Floor)

Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 milimetre x 450 milimetre size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 milimetre thick supports with kadappah top 35 to 40 milimetre thick and polished granite 16 to 20 milimitre top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 centimetre height and top granite of 75 x 40 centimetre including cutting, opening for sink of required size in kadappah as well as granite excetra complete. (Platform top size 5.00 metre x 0.60 metre and height is 0.75 metre) (Third Floor)

Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 milimetre x 450 milimetre size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 milimetre thick supports with kadappah top 35 to 40 milimetre thick and polished granite 16 to 20 milimitre top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 centimetre height and top granite of 75 x 40 centimetre including cutting, opening for sink of required size in kadappah as well as granite excetra complete. (Platform top size 5.00 metre x 0.60 metre and height is 0.75 metre) (Fourth Floor)

Providing and fixing 50 milimetre diameter water meter with non return valve including strainer, sockets/ union nut and including water meter box making locking arrangement and lock. [ without chamber ]

Providing and fixing 15 milimetre diameter screw down bib/stop tap of brass including necessary socket union nut complete.

Providing and fixing screw down for 25 milimetre diameter wheeled stop tap of brass including necessary sockets nut complete.

Providing and fixing screw down for 40 milimetre diameter wheeled stop tap of brass including necessary sockets/union nut complete.

Providing and fixing screw down for 50 milimetre diameter wheeled stop tap of brass including necessary sockets / union nut complete.

Providing and fixing screw down for 25 milimetre diameter wheeled stop tap of brass including necessary union nut complete.

Providing and fixing 45 centimetre wide steel ladder of 40 milimetre x 6 milimetre mild steel flat stringers and steps of 18 milimetre diameter mild steel bar for water tank including fixing it in (1:2:4) Mix-15 cement concrete block 60 centimetre x 30 centimetre x 30 centimetre & painting the ladder complete. (Anti Corrosive Paint)

Providing and fixing Ivory / Approved Color Glazed Earthenware full stall type Urinal with Polyvinyl Chloride flushing cistern of 5 litre capacity with fittings, inlet pipes and stop tap, brackets for fixing the cistern, 32 mm diameter Polyvinyl Chloride flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap and soil pipe connection up to the outside face of the wall.

Providing and fixing Ivory / Approved Color Glazed earthenware Wash Hand Basin of 63 centimetre x 45 centimetre size including cold water piller tap/cold and hot water piller tap brackets, rubber plugs and brass chain,stop tap and necessary pipe connections including P.V.C. waste pipe and trap upto the outside face of the wall.

Providing and fixing Ivory / Approved Color Glazed earthenware sink 600 milimetre x 200 milimetre x 450 milimetre including all connection of the Galvanised Iron supply and Poly Venyl Chloride waste pipes upto the outside face of the wall,cold water chromium plated screw down bib tap, rolled steel or cast iron brackets, rubber plug with chain and stop tap complete.

Providing and fixing 10 centimetre Cast Iron Nahani Trap including Cast Iron grating ,bend and piece of Cast Iron pipe upto the outside face of the wall complete.

Providing and fixing 15 centimetre x 10 m salt glazed stoneware gully trap in cement concrete 1:4:8 out side the building including cast iron grating in the sink, connecting glazed stonewre pipe brick masonry chamber with cast iron lid and cast iron grating for the gully trap.

Providing & constructing Brick Masonry Inspection Chamber 60 centimetre x 45 centimetre x 90 centimetre including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round Glazed Stone Ware pipes, Brick Masonry, plastering from inside and airtight Cast Iron cover of 75 Kg with lid and frame fixed in cement concrete excetra complete.

Providing & constructing Brick Masonry Inspection Chamber 90 centimetre x 45 centimetre x 90 centimetre including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round Glazed Stone Ware pipes, Brick Masonry,plastering from inside and Cast Iron lid 75 Kg with frame fixed in cement concrete excetra complete..

Providing & constructing Brick Masonry Inspection Chamber 60 centimetre x 45 centimetre x 90 centimetre including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round Glazed Stone Ware pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with Reinforced Cement Concrete cover medium duty 140 kilogram with frame excetra complete.

Providing & constructing Brick Masonry Inspection Chamber 90 centimetre x 45 centimetre x 90 centimetre including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round Glazed Stone Ware pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with Reinforced Cement Concrete cover medium duty 140 kilogram with frame excetra complete.

Providing and fixing 450 milimetrex550 milimetre size superior type Belgium mirror with 16 milimetre diameter nickel plated towel rod excetra complete. (Ground Floor)

Providing and fixing 450 milimetrex550 milimetre size superior type Belgium mirror with 16 milimetre diameter nickel plated towel rod excetra complete. (First Floor)

Providing and fixing 450 milimetrex550 milimetre size superior type Belgium mirror with 16 milimetre diameter nickel plated towel rod excetra complete. (Second Floor)

Providing and fixing 450 milimetre x 550 milimetre size superior type Belgium mirror with 16 milimetre diameter nickel plated towel rod complete. (Third Floor)

Providing and fixing 450 milimetrex550 milimetre size superior type Belgium mirror with 16 milimetre diameter nickel plated towel rod excetra complete. (Fourth Floor)

Providing, laying & fixing Polyvinyle Clorine pipe of 110 milimetre diameter with fittings such as bends, tees, reducers, clamps excetra including necessary excavation, trench filling excetra complete. Including removing existing pipe line if necessary and conveying and stacking the same in Public Works Department chowky or as directed excetra complete.

Providing and fixing partition with kadappa stone of all sizes and 25 milimetre thick polished on both side and edges to original including fixing in position in cement mortar 1:4 curing polishing, cleaning excetra complete. (Ground Floor)

Providing and fixing partition with kadappa stone of all sizes and 25 milimetre thick polished on both side and edges to original including fixing in position in cement mortar 1:4 curing polishing, cleaning excetra complete. (First Floor)

Providing and fixing partition with kadappa stone of all sizes and 25 milimetre thick polished on both side and edges to original including fixing in position in cement mortar 1:4 curing polishing, cleaning excetra complete. (Second Floor)

Providing and fixing partition with kadappa stone of all sizes and 25 milimetre thick polished on both side and edges to original including fixing in position in cement mortar 1:4 curing polishing, cleaning excetra complete. (Third Floor)

Providing and fixing partition with kadappa stone of all sizes and 25 milimetre thick polished on both side and edges to original including fixing in position in cement mortar 1:4 curing polishing, cleaning excetra complete. (Fourth Floor)

Providing and fixing 1st class Ivory / Approved Color Glazed earthenware 'Orisa Type' Water Closet Pan 580 mm diameter including 'P' or 'S' trap cast iron soil and vent pipe upto the outside face of the wall (1:5:10) cement concrete bedding 15 milimetre thick 10 litre Polyvinyl Chloride flushing cistern with all necessary pipe connection excetra complete.

Providing and fixing European type Ivory / Approved Color Glazed earthenware coupled closet syphonic trap with syphonic low level white glazed 10 litres cistern with black backlite seat with all necessary pipe connection excetra complete.

Providing and fixing 75 milimetre diameter stabiliser pipe/ Polyvinyl Chloride soil vent/ waste pipe and with necessary fixtuers and fiting such as bends, tees, single junctions slotted vent, clamps excetra complete.

Providing and fixing 100 milimetre diameter stabiliser pipe/ Polyvinyl Chloride soil vent/ waste pipe and with necessary fixtuers and fiting such as bends, tees, single junctions slotted vent, clamps excetra complete.

Providing and fixing High Density Polythene container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity between 1000 to 20000 liters.

Providing and fixing on walls / ceiling / floor 15 milimetre diameter Chlorinated Poly Venyl Chloride pipe with necessary fittings, remaking good the demolished portion. Including removing existing pipe line if necessary and conveying and stacking the same in Public Works Department chowky or as directed complete.

Providing and fixing on walls /ceiling /floor 25 milimetre diameter Chlorinated Polyvinyl Chloride pipe with necessary fittings, remaking good the demolished portion. Including removing existing pipe line if necessary and conveying and stacking the same in Public Works Department chowky or as directed excetra complete.

Providing and fixing on walls /ceiling /floor 50 milimetre diameter Chlorinated Polyvinyl Chloride pipe with necessary fittings, remaking good the demolished portion excetra complete.

Providing and laying in trenches 50 milimetre diameter Chlorinated Polyvinyl Chloride pipe with necessary excavation, fittings, refilling trenches. Including removing existing pipe line if necessary and conveying and stacking the same in Public Works Department chowky or as directed excetra complete.

Providing and fixing reinforced cement concrete Heavy duty (160 Kilogram) cover of size 60centimeter x 45centimeter with frame over inspection chamber excetra complete.

Providng and fixing stainless steel sink of size 600 x 510 x 200 millimeter of Nirali or equivalent make including coupling, outlet pipe, elbow and other necessary fitting, finishing complete.

Providing and fixing Chrome Plated pillar cock long neck with aerator of approved make including necessary sockets/union nut excetra complete.

Providing and fixing Chlorinated Polyvinyl Chloride Rain water pipes of 160 milimetre outer diameter and having wall thickness of 2.2 to 2.7 milimetre confirming to Indian Standard 13592-1992 including proper rainwater receiving recess with Polyvinyl Chloride plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25 milimetre to 40 milimetre from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on Cement Concrete or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the Polyvinyl Chloride fittings and additional 2 piece socket clips shall be got approved from engineer in charge excetra complete. (The contractor shall give 3 yrs guarantee bond for payment)

Providing and fixing Oval Type Under Counter Wash Hand Basin of 16 inch x 22 inch size and of special colour shade having Telephonic Black / Colour Granite of 180 milimetre thick fixed on Black Kadappa Framework, including Chromium Plated coupling Bottle-Trap using CERA company or equivalent Oval Type Wash basin Model No. 3448 as per detailed drawing or as directed by Engineer-In-Charge excetra Complete.

Providing and fixing on walls/ ceiling/ floor 50 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion excetra complete.

Providing, constructing and fixing 600 milimetre diameter Inspection chamber made up of Polypropylene/ polyethylene material having 315 milimetre diameter inlet(s)/outlets and with eccentric reducers as per requirement to connect 160 milimetre and 200 milimetre pipes having thickness of 5 milimetre and 600 milimetre in height, with inbuilt shaft achieve the invert depth as per site condition of wall thickness of 5 milimetre having Reinforced Cement Concrete cover and frame fixing in 150 milimetre thick in Cement Concrete 1:2:4, having crushed sand bed of 150 milimetre thick of size 750 milimetre diameter including excavation and refilling the sides of chamber by sand crushed cushioning 150 milimetre thickness, connecting all required Unplasticised Poly Venyl Chloride fittings with rubber lubricant complete.

Providing and laying cement concrete pipe of Indian Standard 458:2003 non pressure-2 class of 450 milimetre diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 complete.

Providing and laying cement concrete pipe of Indian Standard 458:2003 non pressure-2 class of 600 milimetre diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 complete.

Providing and laying cement concrete pipe of Indian Standard 458:2003 non pressure-2 class of 800 milimetre diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 complete.

Providing and laying cement concrete pipe of Indian Standard 458:2003 non pressure-2 class of 900 milimetre diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 complete.

Construction of granular sub-base by providing close graded Material, spreading in uniform layers with Motor Grader/ Paver on prepared surface, mixing by mix in place method with rotavator at Optimum Moisture Content and compacting with vibratory roller to achieve the desired density complete as per clause 401. For Grading II Material.

Providing and laying in situ cement concrete Mix-30 with tremix treatment for 200 milimetre thickness for Concrete Road including laying plastic sheet of 125 micron with groove cutting of 4 milimetre wide and 20 milimetre deep, with necessary refilling with Refilling with Polysulfide Sealent (pouring Grade) conforming to BS:5212-1989 into sawed groove widened at top for sealent reservoir of specified size and shape as per detailed drawing including fixing polyethylene foam backer road of required diameter (excluding reinforcement) with course and fine agreegates using VSI quality artificial sand excetra complete.

Providing and casting in situ or precast tapering Reinforced Cement Concrte Mix -20 Semi Barrier type Kerb with gutter (as per Indian Road Congress:86-1983) embedded 125 milimetre below ground level over Mix-10 Plain Cement Concrete finished neatly with cement mortar 1:2, setting the same in cement mortar 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant.

Providing and Laying hot applied thermoplastic road marking strip on Bituminous Surface of specified shade/ colour of 2.5 milimetre thick including 1.5 Refractive index reflectorizing glass beads @ 250gram / square metre .Thickness of 2.5 milimetre is exclusive of surface applied glass beads as per Indian Road Congress 35:2015. Initial Dry reflectivity RL shall be > 250 mcd/sqm/lux measured in the initial 7 days and sustained reflectivity RL of 100 mcd/sqm/ lux and Qd of 100 mcd/sqm/ lux measured at the end of 2 years by means of a Standard Reflectometer of Zehntner, Easylux, Delta make capable of measuring RL & QD both according to Indian Road Congress 35:2015 clause 15.5. The finished surface to be level, uniform, and free from streaks and holes complete as per direction of Engineer-in-charge and in accordance with applicable specifications. (Refer Ministry of Road, Transport & Highways Clause 803 for technical Specification and Performance for Indian Road Congress 35:2015).

Providing and fixing factory made Hydraulically pressed Mechanically vibrated and compacted precast inter locking cement concrete paving blocks 80 milimetre thick in Mix-40 grade of approved size and shape for City streets, small /medium market roads,low volume roads, utility cuts on arterial roads excetra as specified and as per Indian Standard 15658:2006 including cost of all materials, manufacturing, curing, transportation of blocks to work site including loading, unloading and stacking as directed, laying paving blocks in position over prepared bed of natural sand/ crushed sand of 50 milimetre thickness including necessary excavation in all stratas, spreading blindge of fine sand over the prepared bed, compacting blocks by plate vibrator excetra complete.

Providing and fixing heavy duty inter locking concrete RUBBER MOULD GLOSSY PAVING BLOCKS of 60 millimeter thickness of having a strength of 400 Kilogram/square metre of approved quality and shape on a bed of crushed sand of 25 to 30 millimeter thick including striking joints and cleaning excetra complete. (using 100% crushed sand)

Design, supply, fabrication and fixing of SS, non glare Signage board (2 feet x 2 feet.- 1 number) for the accessible parking, as per the approved design and make, having 1.2milimetre thick SS non glare base plate and Grade 2/ Grade 1 Braille (raised dots)to be etched/ engraved and be raised 0.5milimetre above base plate and Upper Case San Serif words and Universal Accessibility Symbol to be etched/ engraved and signage to be installed at a height of 2100mm from the ground level using a post of MS hollow square section (50 milimetre x 50 milimetre) as per the installation procedure specified by the manufacturer and as per accessibility standards and up to the satisfaction of the engineer in charge.

Design, supply, fabrication and fixing of SS, non glare multilingual Braille (raised dots) entrance signage (size 1 feet x 1 feet) as per the approved design and make,indicating the name of the building. Having 1.2milimetre thick SS non glare blue coloured base plate with the 'Universal Accessibility Symbol' and Upper case Sans Serif words of height 15mm engraved on it along with the equivalent word/ s written in Hindi using Devnagri script of height 15mm in white colour. Grade 2/ Grade 1 Braille to be etched/ engraved and be raised 0.5milimetre above base plate.The signage to be installed at the specified location on the compound wall near the site entrance gate installed at a height of 1200 milimetre from the finished ground/ floor level, using the necessary hardware specified by the manufacturer and to be installed up to the satisfaction of the engineer in charge.

Grab bars-Providing Stailess Steel grab bars set for accessible toilets comprising of 4 numbers Grab bars as specified below.(1 number wing grab bar + 1 number L shaped grab bar + 2 numbers straight grab bars = 1 typical set) 27a) Swing grab bar (1 Numbers) Providing a Stainless Steel. 304 SWING HANDICAP GRAB BAR - 700 milimetre and of Diameter: 32milimitre and thickness 1.5milimetre of the roved brand and make. 27b) L Shaped grab bar (1 Number) Providing Stainless Steel 304 L SHAPED DISABLED GRAB BAR of SIZE-600 milimetre (H) X 600 milimetre (D) and 32Milimetre Diameter and thickness mm of the approved brand and make. 27c) Straight grab bar (2 NOS) Providing Stainless Steel 304 GRAB RAIL (600 milimetre), 32Milimetre Diameter and thickness 1.5milimetre of the approved brand and make.

Providing and fixing Chrome Plated Angular stop cock with wall flange of approved make including necessary sockets/ union nut excetra complete.

Providing and fixing Chrome Plated Two way BIB cock of approved make including necessary sockets/ union nut excetra complete.

Providing and fixing Chrome Plated BIB cock with wall flange of approved make including necessary sockets/ union nut excetra complete.

Providing and fixing 15 milimetre diameter Polyvinyle Chlorine Aqua kraft type of approved make super jet spray with flange 2 in 1 faucet 1.50 metre long including all accessories etc complete

Providing and fixing sink cock with regular swinging spout (Wall / floor Mounted Model) with wall flange having flow rate up to 6.0 Litr/Minute of Jaquar/Cera/Hindware /Perryware or equivalent make incluidng other necessary fitting, excetra complete as directed by Engineer in charge.( Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.)

Providing and fixing Chrome Plated wall mixer with provision for overhead shower with 115 milimetre long bend pipe & wall flange of approved make including necessary sockets/ union nut excetra complete.

Providing and fixing Chrome Plated pillar cock long neck with aerator of approved make including necessary sockets/union nut excetra complete.

Providing and fixing Chrome Plated sink cock with raised 'J' shaped swinging casted spout of approved make including necessary sockets/union nut excetra complete.

Providing and fixing 900milimetre high Stainless Steel 304 Grade Stainless steel railing with 40milimetre diameter and 1.5milimetre thick at top, 40mm diameter and 1.5milimetre thick vertical supports spaced at 1.5metre center to center and 8mm thick toughened glass including fabricating ,fixtures, errecting , necessary welding, grinding, finishing, buffing to stainless steel pipe excetra complete. (Ground Floor)

Providing and fixing 900milimetre high Stainless Steel 304 Grade Stainless steel railing with 40milimetre diameter and 1.5milimetre thick at top, 40mm diameter and 1.5milimetre thick vertical supports spaced at 1.5metre center to center and 8mm thick toughened glass including fabricating ,fixtures, errecting , necessary welding, grinding, finishing, buffing to stainless steel pipe excetra complete. (First Floor)

Providing and fixing 900milimetre high Stainless Steel 304 Grade Stainless steel railing with 40milimetre diameter and 1.5milimetre thick at top, 40mm diameter and 1.5milimetre thick vertical supports spaced at 1.5metre center to center and 8mm thick toughened glass including fabricating ,fixtures, errecting , necessary welding, grinding, finishing, buffing to stainless steel pipe excetra complete. (Second Floor)

Providing and fixing 900milimetre high Stainless Steel 304 Grade Stainless steel railing with 40milimetre diameter and 1.5milimetre thick at top, 40mm diameter and 1.5milimetre thick vertical supports spaced at 1.5metre center to center and 8mm thick toughened glass including fabricating ,fixtures, errecting , necessary welding, grinding, finishing, buffing to stainless steel pipe excetra complete. (Third Floor)

Providing and fixing 900milimetre high Stainless Steel 304 Grade Stainless steel railing with 40milimetre diameter and 1.5milimetre thick at top, 40mm diameter and 1.5milimetre thick vertical supports spaced at 1.5metre center to center and 8mm thick toughened glass including fabricating ,fixtures, errecting , necessary welding, grinding, finishing, buffing to stainless steel pipe excetra complete. (Fourth Floor)

Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-15 of trap/ granite/ quartzite/ gneiss metal for plain or molded sills, cornice, jambs, block in course, or architraves of required size and shapes including steel centering, plywood/ steel formwork, laying/ pumping, compacting, roughening them if special finish is to be provided,finishing uneven and honeycombed surface and curing excetra complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin excetra (Wooden centering will not be allowed.) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled Reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With fine aggregate (Crushed Sand Vertical Shaft Impactor Grade). (First Floor)

Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-15 of trap/ granite/ quartzite/ gneiss metal for plain or molded sills, cornice, jambs, block in course, or architraves of required size and shapes including steel centering, plywood/ steel formwork, laying/ pumping, compacting, roughening them if special finish is to be provided,finishing uneven and honeycombed surface and curing excetra complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin excetra (Wooden centering will not be allowed.) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled Reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With fine aggregate (Crushed Sand Vertical Shaft Impactor Grade). (Second Floor)

Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-15 of trap/ granite/ quartzite/ gneiss metal for plain or molded sills, cornice, jambs, block in course, or architraves of required size and shapes including steel centering, plywood/ steel formwork, laying/ pumping, compacting, roughening them if special finish is to be provided,finishing uneven and honeycombed surface and curing excetra complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin excetra (Wooden centering will not be allowed.) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled Reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With fine aggregate (Crushed Sand Vertical Shaft Impactor Grade). (Third Floor)

Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-15 of trap/ granite/ quartzite/ gneiss metal for plain or molded sills, cornice, jambs, block in course, or architraves of required size and shapes including steel centering, plywood/ steel formwork, laying/ pumping, compacting, roughening them if special finish is to be provided,finishing uneven and honeycombed surface and curing excetra complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin excetra (Wooden centering will not be allowed.) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled Reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With fine aggregate (Crushed Sand Vertical Shaft Impactor Grade). (Fourth Floor)

Tensile membrane structure - Main Fabric Designing, Supplying, Providing, fabricating, assembling and erection of Tensile membrane Mild Steel structure by Serge Ferrari accrediated category A fabricator using Precontraint TX30 of Serge Ferrari including associated civil work, foundation design, plates, foundation bolts, gutter, flashing, gabel ends wherever required and complete structural design considering wind load & height of installation and providing structural stability certificate for the same from registered structural engineer in project area as per technical specifications and the rate inclusive of all taxes, duties & levies, labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels and shall be as directed by Engineer in charge excetra complete.

Providing and fixing Mipolam Ambiance Ultra Everacre or approved equivalent of Tarkett or Armstrong make, 2milimetre thick homogeneous calendered compacted floor covering in sheet including caping & coving, with non directional design, colour dyed as a raw mixture to ensure even colour throughout the thickness including densely compacted surface for improved wear and ease of maintenance including Level 0 should be ensured with Self leveling compound. This includes providing, laying and curing of average maximum of 5milimetre thick self leveling compound of Level “0” Indiana floorings or as per manufacture's recommendation below the Vinyl flooring for achieving the smooth, hard and absolutely leveled surface to avoid undulations in the top vinyl flooring.Also it should receive a Polyurethane Reinforced (EVERCARE) special maintenance treatment for ease of maintenance and to avoid the use of an acrylic emulsion after installation. The flooring should comply with the EN 649 (34-43) and has a Group T (K5) wear rating. It is suitable for heavy traffic areas. Weight of the material is 2750 g/m2. Procurement and installation of the vinyl flooring shall be started, only after Architects written approval on shade, make and methodology statement submitted by the contractor. the vinyl should be in multiple shades as per design. The installation should be done with gerflor or as per manufacture's recommended wielding Rods as per technical specifications and the rate inclusive of all taxes, duties & levies, labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels and shall be as directed by Engineer in charge.

General hollow metal doors (with or without vision panel 150 milimetre x 600 milimetre)-Stainless Steel 304 Grade Hair line finish. Providing and fixing of Hollow metal doors with Pressed Stainless Steel 304 Grade Hair Line finish. Door frame shall be single rebate profile of size 100 x 57 milimetre (without groove) or 100 x 58milimetre (with groove) made out of 1.20 milimetre (18gauge) minimum thick stainless steel 304 Grade hair line finish sheet. Frames shall be Mitered and field assembled with self tabs. All provision should be mortised, drilled and tapped for receiving appropriate hardware. Rubber door silencers should be provided on the striking jamb. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Once frame installed should be grouted with cement & sand slurry necessary for fire doors on the clear masonry opening, including grouting of frames and filling gaps between wall and frames. Door leaf shall be 46milimetre thick fully flush double skin door with or without vision lite. Door leaf shall be manufactured from 0.8milimetre (22guage) minimum thick Stainless steel 304 grade hair line finish sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be resin bonded honeycomb core. All doors shall be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4mm. For pair of doors astragals has to be provided on the meeting stile for both active and inactive leaf. Vision panel of size 150 milimetre x 600 milimetre wherever applicable should be provided as per manufacturers recommendation. The glass should be 6milimetre clear toughened glass. The door leaf and frame shall have passed minimum 250 hours of salt sprey test. Rate should include supply and installation of door and hardware set as mentioned in the door and hardware schedule. Hardwares – Stainless Steel Ball bearing butt hinges - 4 numbers (for single doors) & 8 numbers. (for double doors) , Stainless steel D handle 250 or 300milimetre long - 1 pair (for single doors) & 2 pairs (for double doors), Mortise Dead Lock - 1 number One side key one side thumb turn cylinder with or without master key - 1number heavy duty door closer - 1 number (for single doors) & 2 number (for double doors), Stainless Steel Door stopper with magnetic catcher - 1 number (for single doors) & 2 numbers (for double doors), Polyvinyle Chloride door buffer for doors adjoining walls/ partitions. Grooved frame seal/gasket for frames as per tender technical specifications and the rate inclusive of all taxes, duties & levies, labour, material, wastage, scaffolding, transportation, including all leads, lifts at all levels and shall be as directed by Engineer in charge.

Providing and fixing of Curtain wall system as per MYWINDOW CW Series. The extruded aluminium sections of Alloy 6063 tolerances confirming to DIN standard from approved raw material source by NALCO using specially designed framework including of profile sections with average minimum thickness of 2 millimetre -MULLION 60 millimetre x 128.5 millimetre & transome 60 millimetre x 134millimeter with powder coated All externally visible surface and the internal visible surfaces will have powder coating finish RAL 9010 of 60-70 micron thickness. The non visible aluminiurn surfaces will have minimum chromatizing treatment aluminium extrusions (min 60 micron) in approved colour, hot dip galvanized required brackets/clamps: bolts, nuts, washers and shims: Stainless Steel expansion fasteners with bolts, nuts and washers, silicon/ethylene propylene diene monomer (M-class) rubber gaskets, drainage provisions: weather seals flashings and seals at all interfaces with building structure, openings and cladding system, excetra Glass-8 millimetre Blue tinted toughened glass DOW Corning silicon/GE/ Wackers with Stainless Steel 304 screws complete to make the structural glazing air tight and water tight as per Indian Standards/Bharat standards complete as per architectural drawings and specifications as directed by the Engineer-in-charge and the rate inclusive of all taxes, duties & levies, labour, material, scaffolding, transportation, price escalations including all leads, lifts at all levels and shall be as directed by Engineer in charge however excluding Goods & Service Tax

Tensile membrane structure - Secondary Fabric Designing, supplying, providing, fabricating, assembling and erection of Tensile membrane Mild Steel structure by Serge Ferrari accredited category A fabricator using Polyvinyle Chloride / PVDF composition of Precontraint 1002 S2 High Tensile of Serge Ferrari including including associated foundation design, plates, foundation bolts, gutter, flashing, gabel ends wherever required complete including structural design considering wind load & height of installation and providing structural stability certificate for the same from registered structural engineer in project area as per tender technical specifications and the rate inclusive of all taxes, duties & levies, labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels and shall be as directed by Engineer in charge.

GARDEN SOIL : Supplying on site garden soil well sieved, 90% to pass through Indian Standard sieve of 10 milimetre size, free from stones rubbish like dried grass mots and other such materialsand the soil should be fresh from quarry and the colour of the soil generally be red including Royalty charges, Transporting upto lead of 20 kilometres, stocking, loading, unloading excetra complete as directed by Engineer in charge.

Preparing Lawn of 30 centimetres deep including excavating the ground to a required depth of 30 centimetres, removing & conveying unwanted stuff to a required distance as directed, Filling fresh garden soil/silt & manure in excavated area in 3:1 proportion to a height of 30 Centimetres, mixing garden soil and manure thoroughly well, levelling, watering on previous night and planting required variety of lawn grass as directed and maintaining till well established by watering, weeding, clipping, rolling excetra complete as directed by engineer incharge.

Preparing Instant Lawn, excavating the ground to a required depth of 20 Centimetre, removing & conveying unwanted stuff to a required distance as directed and Filling fresh garden soil/silt & manure in excavated area in 3:1 proportion to a height of 20 Centimetre, Mixing garden soil and manure thoroughly well, levelling, watering on previous night. Planting required variety of lawn grass as directed and maintaining till well established by watering, weeding, clipping, rolling excetra complete as directed by engineer incharge.

Preparing Shrubbery:- Excavating the ground to a required depth of 30 centimetres, removing rubbish & conveying unwanted stuff to a required distance as directed and filling fresh garden soil & manure in excavated area in 3:1 proportion to a height of 30 centimetres, mixing garden soil and manure thoroughly well, levelling, watering on previous night. Planting well, levelling, watering on previous night. Planting well developed shrubs plants, 0.50 meter height, 0.45 meter, apart as dircted and maintaining till well established by watering, weedings, Stirring replacing, replacing casualaties excetra complete as directed by engineer incharge.

Planting large flowering/Shady trees:- (Minimum Height to 2 Meter) Digging pit with size 0.9 meter × 0.9 meter × 0.9 meter, removing & conveying unwanted stuff to a required distance as directed, filling the pit with approved excavated material up to a height of 0.30 meter and remaining height of 0.60 metre with fresh garden soil & manure in in 3:1 proportion mixing soil and manure thoroughly well, levelling, as directed, watering previous night, planting two or three year old minimum 2.0 meter height and healthy tree sapling as per specifications, maintaining till well established by watering, weedings, Stirring of soil, staking, replacing of casualties excetra complete as directed by engineer incharge.

Designing, providing, constructing, hydraulic testing, commissioning and giving satisfactory trials of Integrated Wetland Technology (IWT) BASED SEWAGE TREATMENT PLANT (STP)- Designing, providing, constructing, hydraulic testing, commissioning and giving satisfactory trials of Integrated Wetland Technology (IWT) based Sewage Treatment Plant (STP) consisting of Screen chamber, Oil &Grease trap, Reinforced Cement Concrete Primary treatment tanks (including manholes, vent pipes and graded gravel media) and RCC Secondary treatment tanks (SBBR) (including gravel media, PVC sheets, wetland plants, plastic mesh, excetra as required.) tank, Reinforced Cement Concrete intermediate and treated water tank, sludge recirculation pump and pipe network, room for tertiary treatment unit, E&M works for tertiary treatment including associated piping work, internal pathways, wire fencing, excetra complete as turnkey job with all involved civil, electrical and mechanical works inclusive of following items, units as per detailed specifications for civil, electrical and mechanical components with all duties and taxes, excetra complete as directed by Engineer-In-charge. Allied structure shall be constructed as per the provision in appropriate and relevant standards and design guidelines of respective authorities. Reinforced Cement Concrete and civil works will be as directed by Engineer-in-charge. Sewage Treatment Plant (STP) to be designed to treat the row water sewage with the characteristics in table number "A" to produce the treated sewage with characteristics as mentioned in table number"B" 0.07 Million Liter per Day (Ground Floor)

OXYGEN SYSTEM - 42+42 manifold complete. Supply Installation, Testing & Commissioning of 02 manifold system of approved make with pig tail pipes & non- return valves with middle frame complete in all aspect as per tender technical specifications attached having rate inclusive of all labour, material wastage, scaffolding, transportation, import duties, transit insurances including all leads and lifts at all levels and shall be as directed by Engineer in charge excetra complete. Approved Makes- Aktiv Technologies / Delta P / G Samaras / BeaconMedas / Drager

OXYGEN SYSTEM Supply, installation Testing & Commissioning fully automatic 02 control panel complete of approved make in all aspect with 35001 IPM Fully Compiles and meets as per tender technical specifications attached having rate inclusive of all labour, material, wastage scaffolding. transportation, import duties transit insurances including all leads and lifts at all levels and shall be as directed by Engineer in charge excetra complete. Approved Makes- Aktiv Technologies / Delta P / G Samaras / BeaconMedas / Drage

OXYGEN SYSTEM - 1 x 24 manifold complete Supply Installation, Testing & Commissioning of 02 manifold complete of approved make with pig tail pipes & non- return valves with middle frame complete in all aspect as per tender technical specifications attached having rate inclusive of all labour material wastage scaffolding transportation, import duties, transit insurances, including all leads and lifts at all levels and shall be as directed by Engineer in charge excetra complete.

OXYGEN SYSTEM Supply, fixing, testing and commissioning of Oxygen Terminal Unit ( Gas outlet points) of approved make with probe/adaptor complete in all aspect, fully Complies and meets with HTM02-0/NFPA99/ISO 7396-1 as per tender technical specifications attached having rate inclusive of all labour, material, wastage, scaffolding, transportation, import duties, transit insurances, including all leads and lifts at all levels and shall be as directed by Engineer in charge excetra complete. Approved Makes- Aktiv Technologies / Delta P / G Samaras / BeaconMedas / Drager

OXYGEN SYSTEM Supply, Installation,Testing & Commissioning of Oxygen flow meter of approved make with Humidifier Bottle 0-15Liters / minute standard flow rate fully Complies and meets with HTM02-0/NFPA99/ISO 7396-1 as per tender technical specifications attached having rate inclusive of all labour, material, wastage, scaffolding, transportation, import duties, transit insurances, including all leads and lifts at all levels and shall be as directed by Engineer in charge excetra complete. Approved Makes- Aktiv Technologies / Delta P / G Samaras / BeaconMedas / Drager

OXYGEN SYSTEM Supply, Installation, Testing & Commissioning of Oxygen High pressure antistatic tube white, as per tender technical specifications attached having rate inclusive of all labour, material, wastage, scaffolding, transportation, import duties, transit insurances, including all leads and lifts at all levels and shall be as directed by Engineer in charge excetra complete.

MEDICAL AIR PLANT Supply, installation, testing and commissioning of DUPLEX Oil Lubricated Rotary Screw Compressor with Duplex Dessicant Dryer & Filteration System of required capacity with Vertical air receiver tank along with accessories like Auto drain valve, gauges, safety valve, excetra. Fully complies and meeta as per HTM-02-01/NFPA99/DIN / EN / ISO -7396-1 standards - Each Compressor should be minimum 7 KW @ 8.5 bar pressure which delivers minimum 40 Cubic Feet per Minute (Free Air Delivery-FAD) and Duplex Dessicant dryer & Filteration System and Air Receiver of require capacity as per MS IS 2825 standard with Duplex Pressure reducing station, rate inclusive of all labour, material, wastage, scaffolding, transportation, import duties, transit insurances, including all leads and lifts at all levels and shall be as directed by Engineer in charge excetra complete. Approved Makes- Gardner & Denver / Delta P / Aktiv Technologies / Ingersoll Rand

MEDICAL AIR PLANT Supply, fixing, testing and commissioning of Medical Air MA-4 Terminal Unit (Gas outlet points) of approved make with probe/adaptor complete in all aspect fully Complies and meets with HTM02-0/NFPA99/ISO 7396-1 as per tender technical specifications attached having rate inclusive of all labour, material, wastage, scaffolding, transportation, import duties, transit insurances, including all leads and lifts at all levels and shall be as directed by Engineer in charge excetra complete. Approved Makes- Aktiv Technologies / Delta P / G Samaras / BeaconMedas / Drager

MEDICAL AIR PLANT Supply, Installation,Testing & Commissioning of Medical Air High pressure tube of approved make as per tender technical specifications. It should be colour coded for individual services i.e. white for Oxygen, Blue for N2O and Yellow for Vacuum, Black for air & Grey for CO2. Antistatic rubber tube should be as per Indian StandardO standards as per tender technical specifications attached having rate inclusive of all labour, material, wastage, scaffolding, transportation, import duties, transit insurances, including all leads and lifts at all levels and shall be as directed by Engineer in charge excetra complete. Approved Makes- Aktiv Technologies / Delta P / G Samaras / BeaconMedas / Drager

VACUUM CENTRAL SYSTEM Supply, fixing, testing and commissioning of Quadeuplex / Duplex Medical Vaccum Plant, twin Vertical vacuum receiver tank and bacterial filter, one Power Control Unit control complete in all aspect, fully complies and meets with HTM02-0/NFPA99 / ISO7396 - 1 Including Vacuum Pump, Double Cylinder, Single Stage, Air Cooled type suitably mounted on M.S. Channel base frame to be driven by AC 3 Phase 440 Volts TEFC Electric Motor complete with V-Belt Drive, Belt Guard & DOL with Size-5” & 5” X 3-1/2”,Speed 750 RPM Piston Displacement-60.00 CFM (1698 LPM), Max. Vacuum referred to 737 mm 29” HG,B.H.P. required-3.60 H.P.,Motor required-5.00 H.P.and Vacuum Tank 1000 Ltr Capacity as per Indian Standard 2062. Standard Thickness (Shell/Dish) - 8/10 milimetre, Standard Working Pressure - 8.5 Bar, Standard Design Pressure 10 Bar, Standard Test Pressure - 15 Bar Standard Diamensions Fully Complies and meets with Health Technical Memorandum 02-0 / National Fire Protection Association 99 / International Organization for Standardization 7396-1 as per tender technical specifications attached having rate inclusive of all labour, material, wastage, scaffolding, transportation, import duties, transit insurances, including all leads and lifts at all levels and shall be as directed by Engineer in charge excetra complete. Approved Makes- Bosch / Delta P / Aktiv Technologies / Ingersoll Rand

VACUUM CENTRAL SYSTEM Supply, fixing, testing and commissioning of Vacuum Terminal Unit (Gas outlet points) of approved make with probe/adaptor complete in all aspect, fully complies and meets with HTM02-01 as per tender technical specifications attached having rate inclusive of all labour, material, wastage, scaffolding, transportation, import duties, transit insurances, including all leads and lifts at all levels and shall be as directed by Engineer in charge excetra complete. Approved Makes- Aktiv Technologies / Delta P / G Samaras / BeaconMedas / Drager

VACUUM CENTRAL SYSTEM Supply, Installation, Testing & Commissioning of Vacuum regulator : High suction type of approved make, fully Complies and meets with HTM02-0/NFPA99/ISO 7396-1 of approved make as per tender technical specifications attached having rate inclusive of all labour, material, wastage, scaffolding, transportation, import duties, transit insurances, including all leads and lifts at all levels and shall be as directed by Engineer in charge excetra complete.

VACUUM CENTRAL SYSTEM Supply, Installation,Testing & Commissioning of vacuum collection jar size of polysulfone jar with lid complete in all aspect, fully Complies and meets with HTM02-0/NFPA99/ISO 7396-1 of approved make as per tender technical specifications attached having rate inclusive of all labour, material, wastage, scaffolding, transportation, import duties, transit insurances, including all leads and lifts at all levels and shall be as directed by Engineer in charge excetra complete.

Backboxes for Outlets Supply, fixing, testing and commissioning of rectangular Plastic box (75milimetre x 105milimetre) of approved make with clamp & screw for gas outlets or equivalant compatible with the gas outlet as per tender technical specifications attached having rate inclusive of all labour, material, wastage, scaffolding, transportation, import duties, transit insurances, including all leads and lifts at all levels and shall be as directed by Engineer in charge excetra complete.

MEDICAL GRADE COPPER PIPING Supply, Installation,Testing & Commissioning of Copper Pipes of 12 milimetre Outer Diameter and 0.9 milimetre thick of approved make as per tender technical specifications attached having rate inclusive of all labour, material, wastage, scaffolding, transportation, import duties, transit insurances, including all leads and lifts at all levels and shall be as directed by Engineer in charge excetra complete. Approved Makes - Copper Piping: Mexflow / Rajco / Mandav / Janya Approved Makes - Copper Fittings: IBP Conex / Mexflow / Rajco / Mandav / Janya

MEDICAL GRADE COPPER PIPING Supply, Installation,Testing & Commissioning of Copper Pipes of 15 milimetre Outer Diameter and 0.9 milimetre thick of approved make as per tender technical specifications and Supply, Installation,Testing & Commissioning of Vacuum HP antistatic tube, yellow, fully Complies and meets with HTM02-0/NFPA99/ISO 7396-1 as per tender technical specifications attached having rate inclusive of all labour, material, wastage, scaffolding, transportation, import duties, transit insurances, including all leads and lifts at all levels and shall be as directed by Engineer in charge excetra complete. Approved Makes - Copper Piping: Mexflow / Rajco / Mandav / Janya Approved Makes - Copper Fittings: IBP Conex / Mexflow / Rajco / Mandav / Janya

MEDICAL GRADE COPPER PIPING Supply, Installation,Testing & Commissioning of Copper Pipes of 22 milimetre Outer Diameter and 0.9 milimetre thick of approved make as per tender technical specifications attached having rate inclusive of all labour, material, wastage, scaffolding, transportation, import duties, transit insurances, including all leads and lifts at all levels and shall be as directed by Engineer in charge excetra complete. Approved Makes - Copper Piping: Mexflow / Rajco / Mandav / Janya Approved Makes - Copper Fittings: IBP Conex / Mexflow / Rajco / Mandav / Janya

MEDICAL GRADE COPPER PIPING Supply, Installation,Testing & Commissioning of Copper Pipes of 28 milimetre Outer Diameter and 0.9 milimetre thick of approved make as per tender technical specifications attached having rate inclusive of all labour, material, wastage, scaffolding, transportation, import duties, transit insurances, including all leads and lifts at all levels and shall be as directed by Engineer in charge excetra complete. Approved Makes - Copper Piping: Mexflow / Rajco / Mandav / Janya Approved Makes - Copper Fittings: IBP Conex / Mexflow / Rajco / Mandav / Janya

MEDICAL GRADE COPPER PIPING Supply, Installation,Testing & Commissioning of Copper Pipes of 35 milimetre Outer Diameter and 0.9 milimetre thick of approved make as per tender technical specifications attached having rate inclusive of all labour, material, wastage, scaffolding, transportation, import duties, transit insurances, including all leads and lifts at all levels and shall be as directed by Engineer in charge excetra complete. Approved Makes - Copper Piping: Mexflow / Rajco / Mandav / Janya Approved Makes - Copper Fittings: IBP Conex / Mexflow / Rajco / Mandav / Janya

MEDICAL GRADE COPPER PIPING Supply, Installation,Testing & Commissioning of Copper Pipes of 42 milimetre Outer Diameter and 0.9 milimetre thick of approved make as per tender technical specifications attached having rate inclusive of all labour, material, wastage, scaffolding, transportation, import duties, transit insurances, including all leads and lifts at all levels and shall be as directed by Engineer in charge excetra complete. Approved Makes - Copper Piping: Mexflow / Rajco / Mandav / Janya Approved Makes - Copper Fittings: IBP Conex / Mexflow / Rajco / Mandav / Janya

MEDICAL GRADE COPPER PIPING Supply, Installation,Testing & Commissioning of Copper Pipes of 54 milimetre Outer Diameter and 0.9 milimetre thick of approved make as per tender technical specifications attached having rate inclusive of all labour, material, wastage, scaffolding, transportation, import duties, transit insurances, including all leads and lifts at all levels and shall be as directed by Engineer in charge excetra complete. Approved Makes - Copper Piping: Mexflow / Rajco / Mandav / Janya Approved Makes - Copper Fittings: IBP Conex / Mexflow / Rajco / Mandav / Janya

BED HEAD PANELS Supply, Installation,Testing & Commissioning of 1200 milimetre BED HEAD WALL PANEL of approved make as per tender technical specifications attached having rate inclusive of all labour, material, wastage, scaffolding, transportation, import duties, transit insurances, including all leads and lifts at all levels and shall be as directed by Engineer in charge excetra complete. Approved makes- AKTIV/ DELTA P/ G SAMARAS / BEACON MEDAS / DRAGER

ZONE VALVE BOX - 3 Gas Services Supply, Installation,Testing & Commissioning of Zone Valve Box (3 Gas Services) of approved make, Fully Complies and meets with HTM02-0/NFPA99/ISO 7396-1 as per tender technical specifications attached having rate inclusive of all labour, material, wastage, scaffolding, transportation, import duties, transit insurances, including all leads and lifts at all levels and shall be as directed by Engineer in charge excetra complete. Approved Makes- Aktiv Technologies / Delta P / G Samaras / Beacon Medas / Drage

ZONE VALVE BOX - 2 Gas Services Supply, Installation,Testing & Commissioning of Zone Valve Box (2 Gas Services) of approved make, Fully Complies and meets with HTM02-0/NFPA99/ISO 7396-1 as per tender technical specifications attached having rate inclusive of all labour, material, wastage, scaffolding, transportation, import duties, transit insurances, including all leads and lifts at all levels and shall be as directed by Engineer in charge excetra complete. Approved Makes- Aktiv Technologies / Delta P / G Samaras / Beacon Medas / Drage

AREA ALARM - 3 Gas Services Supply, Installation,Testing & Commissioning of 3 Gases Service area alarm of approved make, fully Complies and meets with HTM02-0/NFPA99/ISO 7396-1 as per tender technical specifications attached having rate inclusive of all labour, material, wastage, scaffolding, transportation, import duties, transit insurances, including all leads and lifts at all levels and shall be as directed by Engineer in charge excetra complete. Approved Makes- Aktiv Technologies / Delta P / G Samaras / BeaconMedas / Drager

AREA ALARM - 2 Gas Services Supply, Installation,Testing & Commissioning of 2 Gases Service area alarm of approved make, fully Complies and meets with HTM02-0/NFPA99/ISO 7396-1 as per tender technical specifications attached having rate inclusive of all labour, material, wastage, scaffolding, transportation, import duties, transit insurances, including all leads and lifts at all levels and shall be as directed by Engineer in charge excetra complete. Approved Makes- Aktiv Technologies / Delta P / G Samaras / BeaconMedas / Drager

AREA ALARM - MAIN MASTER PANEL Supply, Installation,Testing & Commissioning of MAIN MASTER GAS ALARM FOR 6 GASES of approved make, fully Complies and meets with HTM02-0/NFPA99/ISO 7396-1 as per tender technical specifications attached having rate inclusive of all labour, material, wastage, scaffolding, transportation, import duties, transit insurances, including all leads and lifts at all levels and shall be as directed by Engineer in charge excetra complete. Approved Makes- Aktiv Technologies / Delta P / G Samaras / BeaconMedas / Drager

LOCKABLE LINE VALVES Supply, Installation,Testing & Commissioning of 15 milimetre lockable line valves of approved make as per tender technical specifications attached having rate inclusive of all labour, material, wastage, scaffolding, transportation, import duties, transit insurances, including all leads and lifts at all levels and shall be as directed by Engineer in charge excetra complete. Approved Makes- Aktiv Technologies / Delta P / G Samaras / Beacon Medas / Drager

LOCKABLE LINE VALVES Supply, Installation,Testing & Commissioning of 22 milimetre lockable line valves of approved make as per tender technical specifications attached having rate inclusive of all labour, material, wastage, scaffolding, transportation, import duties, transit insurances, including all leads and lifts at all levels and shall be as directed by Engineer in charge excetra complete. Approved Makes- Aktiv Technologies / Delta P / G Samaras / Beacon Medas / Drager

LOCKABLE LINE VALVES Supply, Installation,Testing & Commissioning of 28 milimetre lockable line valves of approved make as per tender technical specifications attached having rate inclusive of all labour, material, wastage, scaffolding, transportation, import duties, transit insurances, including all leads and lifts at all levels and shall be as directed by Engineer in charge excetra complete. Approved Makes- Aktiv Technologies / Delta P / G Samaras / Beacon Medas / Drager

LOCKABLE LINE VALVES Supply, Installation,Testing & Commissioning of 35 milimetre lockable line valves of approved make as per tender technical specifications attached having rate inclusive of all labour, material, wastage, scaffolding, transportation, import duties, transit insurances, including all leads and lifts at all levels and shall be as directed by Engineer in charge excetra complete. Approved Makes- Aktiv Technologies / Delta P / G Samaras / Beacon Medas / Drager

LOCKABLE LINE VALVES Supply, Installation,Testing & Commissioning of 42 milimetre lockable line valves of approved make as per tender technical specifications attached having rate inclusive of all labour, material, wastage, scaffolding, transportation, import duties, transit insurances, including all leads and lifts at all levels and shall be as directed by Engineer in charge excetra complete. Approved Makes- Aktiv Technologies / Delta P / G Samaras / Beacon Medas / Drager

LOCKABLE LINE VALVES Supply, Installation,Testing & Commissioning of 54 milimetre lockable line valves of approved make as per tender technical specifications attached having rate inclusive of all labour, material, wastage, scaffolding, transportation, import duties, transit insurances, including all leads and lifts at all levels and shall be as directed by Engineer in charge excetra complete. Approved Makes- Aktiv Technologies / Delta P / G Samaras / Beacon Medas / Drager

ELECTRICAL SYSTEM Supply, Installation,Testing & Commissioning of Complete Vaccum & Compressed Air Plant and Manifold cabeling from electrical control panel & with three phase supply (supplied by the Hospital) of approved make as per tender technical specifications attached having rate inclusive of all labour, material, wastage, scaffolding, transportation, import duties, transit insurances, including all leads and lifts at all levels and shall be as directed by Engineer in charge excetra complete.

ELECTRICAL SYSTEM Supply, Installation,Testing & Commissioning of Electrical Control Panel of approved make as per tender technical specifications attached having rate inclusive of all labour, material, wastage, scaffolding, transportation, import duties, transit insurances, including all leads and lifts at all levels and shall be as directed by Engineer in charge excetra complete.

LIQUID OXYGEN TANK Supplying, fixing, testing & commissioning Vaccum + Perlite insulated 6 kilolitre capacity vertical storage tank designed for LOX service to EN-13458-2 code with STD PBU-12 of approved make as per tender technical specifications attached and rate shall include approval from PESO for all systems installed and the rate shall be inclusive of all liasoning charges in securing license from all government authorities, of preparation of approval design drawings, as-built drawings, arranging government officials inspection visits from any location in India and any other incidental expenses inclusive of all labour, material, wastage, scaffolding, transportation, import duties, transit insurances, including all leads and lifts at all levels and shall be as directed by Engineer in charge excetra complete. Approved makes- INOX/ SPARKS/ AMBICA/ SHELL& TUBE

LIQUID OXYGEN TANK Supplying, fixing, testing & commissioning low pressure Ambient Air Vaporizer designed to ASME code for 8 hours Duty cycle of approved make as per tender technical specifications attached including connecting piping/bends/fittings between tank and vaporizers as per system P&ID, Cost shall include securing approval from PESO for all systems installed, inclusive of all labour, material, wastage, scaffolding, transportation, import duties, transit insurances, including all leads and lifts at all levels and shall be as directed by Engineer in charge excetra complete. Approved makes- INOX/ SPARKS/ AMBICA/ SHELL& TUBE

LIQUID OXYGEN TANK Supplying, fixing, testing & commissioning Pressure Reducing Spool Assembly of approved make and approval from PESO is mandatory for all systems installed and the rate inclusive of all labour, material, wastage, scaffolding, transportation, import duties, transit insurances, including all leads and lifts at all levels and shall be as directed by Engineer in charge excetra complete. Approved makes- INOX/ SPARKS/ AMBICA/ SHELL& TUBE/ VANAZ

LIQUID OXYGEN TANK Providing, supplying and fixing in position Civil, electrical, plumbing, fire fighting work for Liquid Oxygen Tank platform strictly as per PESO guidelines, inclusive of preparation of detail Civil Foundation design, drawing, execution for tank & vaporizer, excavation, backfilling, casting civil foundation and any other civil work within battery limit (with in Liquid Oxygen Tank platform as specified by PESO), Site Fencing, Gate installation with lock & key as per PESO guideline, including stainless steel pipe welding with Non Destructive Testing Inspection, Installation of Pipe support & Miscellaneous structure work, Pipeline flushing & Pneumatic test for Piping system, supplying and fixing of Dry nitrogen cylinder 99.99% Gr-1 including cabling work (Cabling Signal & Multicore cable),Tubing, instrument installation, Loop check, Tubing, Instrument support, Foundation Bolts Fitting, GROUTING, Curing, Earthing PIT (Copper Rod)– Supply & installation as per PESO requirement. Installation of Sign Board & safety Sticker as per PESO requirement, Hard Stand & Flooring as per PESO requirement, Supply & installation of Fire Extinguisher, Fire Bucket as per PESO guideline. Water line installation as per PESO with tap from nearest water main. Supply of Touch up Painting of the facility with epoxy system (only for tank outer vessel). All work to be strictly carried out as per PESO guidelines and the rate shall also be inclusive of all liasoning charges in securing license from all government authorities including PESO and the rate shall be inclusive of preparation of approval design drawings, as-built drawings, arranging government officials inspection visits from any location in India and any other incidental expensesand the rate shall also include on Site Staff training for one day and hand over system and supplying of one number of Vaccum + Corrugated Cryogenic Filling Hose with flange & nut as per tender technical specifications attached having of all labour, material, wastage, scaffolding, transportation, import duties, transit insurances, including all leads and lifts at all levels and shall be as directed by Engineer in charge excetra complete.

Wall system in Operation Theatre complex :-Supply, Installation, Testing & Commissioning of Wall Panels in Operation Theatre as per tender technical specification & this Bill of Quantities

Ceiling system in Operation Theatre complex:-Supply, Installation, Testing & Commissioning of Ceiling System in Operation Theatre as per tender technical specification & this Bill of Quantities

Flooring:-Supply, Installation, Testing & Commissioning of Antistatic & Conductive Flooring in operation theatre as per tender technical specification & this Bill of Quantities

Supply, Installation, Testing & Commissioning of Exhaust Air Shaft/Cabinets as per tender technical specification & this Bill of Quantities

Supply, Installation, Testing & Commissioning of Pressure relief damper as per tender technical specification & this Bill of Quantities

Hospital Doors:-Supply, Installation, Testing & Commissioning of Operation Theatres door’s Automatic Single Leaf lead lined Sliding door with SS 304 door blade surface, each 2100 milimetre x 1500 mm as per tender technical specification & this Bill of Quantities

Supply, Installation, Testing & Commissioning of Storage cabinet system as per tender technical specification & this Bill of Quantities

Supply, Installation, Testing & Commissioning of Ergonomic Lights as per tender technical specification & this Bill of Quantities

Supply, Installation, Testing & Commissioning of X-Ray Viewing System as per tender technical specification & this Bill of Quantities

Supply, Installation, Testing & Commissioning of Magnetic Writing Board in each operating theatre. It should be made of ceramic having Magnetic properties and should be flushed to the wall of the operating room as per tender technical specification & this Bill of Quantities

Supply, Installation, Testing & Commissioning of Scrub Sink 2 Bay as per tender technical specification & this Bill of Quantities

Supply, Installation, Testing & Commissioning of Pass- Through box of dimension 600 milimetre (width) x 600 milimetre (Height) and depth shall be minimum 600 milimetre as per tender technical specification & this Bill of Quantities

Supply, Installation, Testing & Commissioning of Corner Guard Protection System in OT complex as per tender technical specification & this Bill of Quantities

Supplying and erecting HMS PVC conduit FRLS grade 20 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC. 1-1-7

Supplying and laying HMS PVC conduit FRLS grade 20 mm dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC. (1-1-8)

Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC. (1-1-9)

Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC. (1-1-10)

Supplying and erecting HMS PVC conduit FRLS grade 32 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC. (1-1-11)

Supplying and erecting HMS PVC conduit FRLS grade 20 mm dia. with PVC accessories on wall / ceiling as per specification No: WG-MA/CON. (1-2-3)

Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with PVC accessories on wall /ceiling as per specification No: WG-MA/CON. (1-2-4)

Supplying and erecting HMS PVC conduit FRLS grade 32 mm dia. with PVC accessories on wall / ceiling as per specification No: WG-MA/CON. (1-2-5)

Supplying and erecting green colour earthing with 1x 2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW (1-3-2)

Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW (1-3-2)

Supplying and erecting green colour earthing with 1x 4 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW (1-3-3)

Supplying and erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW. (1-3-3)

Supplying and erecting mains with 2x 6 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW (1-3-4)

Supplying and erecting green colour earthing with 1x 6 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW (1-3-4)

Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete. (1-6-1)

Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete. (1-6-2)

Supplying and erecting modular type bell-push 6A / 10A duly erected on provided plate and box with wiring connections complete. (1-6-3)

Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete. (1-6-10)

Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete. (1-6-11)

Supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete. (1-6-23)

Supplying and erecting modular type blanking plate one module, duly erected on provided plate & box. (1-6-24)

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. (1-6-34)

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. (1-6-36)

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. (1-6-38)

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. 1-6-40

Point wiring for light/bell concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/CW. (1-7-5)

Point wiring for ceiling fan concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/CW. (1-7-6 New)

Point wiring for light/bell hybrid type (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/HW 1-7-15

Point wiring with two way control light in stair case concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm. (2+1E) FR grade copper wires modular type switch earthing and required accessories as per specification No: WG-PW/CW 1-7-6

Point wiring for independent plug, concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No WG-PW/SW. (1-7-8)

Wiring for plug on board with Switch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification No: WG-PW/CW. (1-7-26)

Supplying and erecting anodized aluminium corridor / passage / mirror light LED fitting (2 feet) Max. 12W with high transitivity diffuser with min. system lumens output of 1200 lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver with end caps on provided PVC Block / wooden board with 3 years warranty. 2-1-16

Supplying and erecting LED square / circular Max. 18 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. 2-1-5

Supplying and erecting LED Panel Light(600mm X 600mm) Max. 35 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min 4200 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. 2-1-8

Supplying and erecting anodized aluminium corridor / passage light LED fitting (4 feet) Max. 22W with high transitivity diffuser with system lumens output of Min.2200 lumens , min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty. 2-1-18

Supplying and erecting LED square / circular Max. 7W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 770 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. 2-1-2

Supplying and erecting anodized aluminium corridor / passage / mirror light LED fitting (2 feet) Max. 12W with high transitivity diffuser with min. system lumens output of 1200 lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver with end caps on provided PVC Block / wooden board with 3 years warranty. 2-1-16

Supplying and erecting ding dong / electronic musical type call bell with heavy duty coil suitable to operate on 230V A.C. supply erected on polished double wooden block/sunmica block of suitable size (2-3-13)

Supplying and erecting luminous / modular type call bell indicator with plastic body, heavy duty coil and indicator lamp working on 230V A.C. supply with resetting arrangement complete erected on double wooden/ sunmica board. (2-3-14)

Supplying and erecting Electronic type cordless call bell erected on T.W. board having portable bell push working on 9V D.C. battery and (effective range upto 45 meter) bell on 250 V A.C. supply. (2-3-15)

Supplying & erecting 0.5W, 230V integral type LED Lamp suitable for B-22/E-27 base. (2-8-7)

Supplying and erecting bracket fan 400 mm. sweep A. C. 230 volts 50 cycles 1350 RPM. Oscillating type, plastic or metal blades chrome plated guard with speed regulator and moisture proof treatment to winding and with ‘E’ class insulation. (2-10-4)

Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 225mm. 1400 RPM rust proof body & blades, wire mesh, duly erected, complete. (2-10-14)

Supplying and erecting exhaust fan heavy duty 230 V, A.C. 50 cycles 375/380 mm. 900 RPM complete erected in position as per specification no. FG-FN/EXF (2-10-16)

Supplying and erecting energy saving ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FN/CF (2-10-21)

Supplying and erecting fan hook of 10 mm. M.S. round bar grouted in RCC slab with making the site as original. (2-11-4)

Supplying and erecting ‘B’ class G.I .pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire. (2-11-6)

Supplying and erecting storage type water heater 25 litres capacity having standing loss <0.511kWh/24hour/45°C, high impact resistance engineering plastic body with anti corrosive high grade steel inner tank, heating element having hard water & corrosion protection, with minimum 3 safety protections (i.e. thermostat & thermal function cut-out, valve) with total pressure 8 bar withstanding capacity duly tested and marking sr. no. and date of erection complete. specification no. AP-WH/STWH (3-1-2)

Supplying, erecting, testing and commissioning self contained water cooler 230/250V 50Hz nominal cooling capacity of 150 litres per hour and storage capacity 150 litres with partially stainless steel body as per specification no. AP-WCR/WC (3-3-10)

Supplying and erecting ultra violet storage type water purifier (RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water minimum 0.33 litre/min with activated carbon filter and softener operating on 230V, single phase A.C. supply with UV fail & filter change indication system .(for TDS more than 200) (3-5-1)

Supplying, erecting, testing and commissioning of 6kVA capacity online pure sine wave with backup time of 30 min. PWM & IGBT based UPS with 0.9 to unity output pf, single phase input & 1 phase output complete with all protections with 12v/100Ah SMF Battries as per specification no. AP-UPS 3-7-4

Supplying, erecting, testing and commissioning of 10kVA capacity online pure sine wave with backup time of 30 min. PWM & IGBT based UPS with 0.9 to unity output pf, single phase input & 1 phase output complete with all protections with 12v/100Ah SMF Battries as per specification no. AP-UPS (3-7-5)

Supplying and erecting 12V/42Ah SMF battery with battery terminal wire, duly charged with 24 months warranty complete 3-8-10

Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB (5-3-2)

Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB (5-3-3)

Supplying, erecting & marking TPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB (5-3-10)

Supplying, erecting & marking DPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB (5-3-6)

Supplying, erecting & marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB (5-3-11)

Supplying, erecting & marking FPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB (5-3-12)

Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB (5-3-13)

Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB (5-4-8)

Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB (5-4-9)

Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 4 ways /12 Poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB (5-4-4)

Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 8 ways /24 poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB (5-4-5)

Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole/4 pole MCCB as incomer & outgoing SP MCB (36 poles) or TP MCB of 12 ways (36 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB1 (5-4-17)

Supplying, fixing and commissioning 2 pole, RCBO 6/10/16/20/25A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCCB/RCBO (5-6-9)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 95 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (7-1-19)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 120 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (7-1-20)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (7-1-27)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (7-1-28)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (7-1-29)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 25 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (7-1-15)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 35 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (7-1-16)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 70 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (7-1-18)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 185 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (7-1-22)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½core 240 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (7-1-23)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 300 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (7-1-24)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (7-1-26)

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 150 mm width & 100 mm height comprising all required standard accessories. (7-11-1)

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 300 mm width & 100 mm height comprising all required standard accessories. (7-11-3)

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 200 mm width & 75 mm height complete with necessary coupler plates & hardware. (7-11-7)

Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP (9-1-1)

Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP. (9-2-3)

Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation complete. (9-3-1)

Providing and Back filling back filling ground enhancing compound 25 kg bag complete. (9-3-2)

Supplying, erecting, testing and commissioning 11KV HT metering cubical (compact / vertical type) approved by MSEDCL / licensee fabricated with 2 mm (14 SWG) M.S. sheets with supporting angle, painted with powder coating / epoxy paint of required shade, copper bus bar size 25 x 6 mm, heavy duty mechanical lock, with counter meter for measuring no of times the opening of meter door, top side cover (CT, PT cover) interlock with meter door, epoxy casted 3 nos. CT having required ratio between 10/5A to 50/5A, VA10 or 15, Class 0.5S, epoxy casted 3 nos. PT having ratio 11000/V3/110/V3 VA 50, Class 0.5 suitable for provided trivector meter, and provision for incoming and outgoing cables complete duly tested by licensee with necessary test certificates and erected on provided plinth/ cc foundation.(6-4-1)

Supplying and erecting 200 kVAr, 440 V 3 phase, 50 Hz., Contactor Logic & Intelligent Relay micro APFC passive filter panel, consisting of suitable steps of APP/MPP type capacitor units with Detuned (harmonic filter) reactors of suitable rating , APFC panel shall be compliance to IEC 61439 and power quality IEC 61921 standard as per specification no CP-ED/APFC.(6-7-9)

Supplying & erecting G.I. pipe ‘A’ class 75 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE .(7-6-4)

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.(7-6-9)

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 120 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. (7-6-12)

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 160 mm outside dia, double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. (7-6-14)

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 200 mm outside dia, double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. ( 7-6-16)

Supplying & erecting 100 x 50 x 6 mm with 4.7 mm thick web and 7.5 mm thick flange channel iron cross arm of suitable length for 2.4 m wide DP structure and erecting on DP with 50x6mm clamp complete as per specification no. OH-PL/BKT (8-3-11)

Supplying and erecting iron sheet metal work consisting of CRCA sheets various sections of iron plates chequered plates rods bars MS pipes etc. for panel board or any other purpose with bending cutting drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. ( For Cross Angles 4.5 Mtrs of 25 X 25 angles 4 Nos. 18 Mtrs @1.4 Kg.per mtr 25 2 Kg say 25 Kg.) (6-1-19)

Supplying and erecting porcelain disc type insulator 45KN with necessary hardware suitable for 11kV line, complete as per specification no. OH-INS/DI (8-5-6)

Supplying and erecting porcelain pin type insulator with GI pin suitable for 11kV line, complete as per specification no. OH-INS/PN (8-5-9)

Supplying and erecting distribution class, 11 kV thyrite type lightening arrester with nut bolts, on provided MS channel as per specification no. OH-INS/LA (8-5-15)

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results as per specification no. EA-EP ( 9-1-3)

Providing earthing with copper earth plate size 60 x 60 x 0.315 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover with minimum 25 kg Carbon based environment friendly back fill Ground Enhancing compound complete with all materials, testing & recording the results as per specification no ESE -LA (9-1-6)

Supplying and erecting copper strip of high purity required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint with joints required. As per specification no. EA-EP. ( 9-2-2)

Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP. ( 9-2-3)

Supplying and erecting 11 kV outdoor type gang operated air break, triple pole switch 200 A capacity with 3 post pin type insulator per phase, mounted in horizontal or vertical position with necessary channels on provided cross arm with adequate length of "C" class G.l. pipe for operating handle erected on extended square shaft. The operating handle provided with lock and key at suitable height from ground level with necessary clamp. ( 10-6-1)

Supplying and erecting, 11 kV outdoor type drop out fuse with insulator complete with fuse holders, fuse barrel with metal fitting, fuse element mounted on M.S. channel with working current of 15A capacity complete erected on provided cross arm. (10-6-5)

Supplying and erecting hard drawn copper solid wire no. 0 to 6 SWG complete erected for connections on H.T. sides. (10-6-10)

Supplying and erecting extra thick alkathene pipe 10 mm dia. erected to enclose bare conductor wires complete.. (use shall be restricted to H.T.) (10-6-11)

Supplying heavy duty operating rod, outer dia 25 mm & inner dia 20 mm suitable for 11 kV with brass couplings etc. for removing drop out fuses at 6 meters length, 4 pieces each with rain shade with hand grip including earthling chain 1.5m complete. (10-6-13)

Supplying and erecting fencing of section having size 2450 mm in height from ground level and 1200 mm width with angle iron frame work erected in CC foundation and painted complete as per specification no SS-AS/FSG. (10-6-18)

Supplying and erecting 50 x 50 x 6 mm angle iron as corner support 2m long fixed at the middle of the fencing frame and the other side inclined at 30 degree angle, in cement concrete foundation of 15 x 15 x 40 cm complete duly painted with one coat of red oxide and two coats aluminium paint complete. (10-6-19)

Supplying and erecting double leaf hinged door each 1500 mm in width x 1850 mm in height using B class, GI pipe with angle iron supports, chain link wire mesh (jali) complete supported on channel iron, erected in foundation, and painted complete as per specification no SS-AS/DLD.(10-6-20)

Supplying & erecting barbed wire two ply with 12 SWG ply and 12 SWG barb with a gap between two bars of 75 mm. firmly fixed on provided angle supports with necessary materials complete. (6.044 meters/kg.). (10-6-21)

Providing printed instruction chart for treating persons suffering from electric shock, printed in English & Marathi and duly laminated complete.(10-6-22)

Providing pair of duly tested rubber hand gloves as per IS :47705 suitable for working up to 22 kV supply complete.(10-6-23)

Providing Round bottom fire bucket of 9 Litres capacity as per IS : 2546 made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and red outside with FIRE Mark, on provided stand/ wall hook complete. NON-CSR

Providing Floor mounting stand for keeping 4 Nos. of FIRE buckets 1500mm in length, 900mm in height frame made out of 30x30x4 mm angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of silver paint complete. NON-CSR

Supplying standard first aid box with necessary antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-Aid) adhesive tape for medicinal use, scissors, anti-septic solution, etc. (All above contents shall be of standard makes)(10-6-24)

Supplying and fixing PVC synthetic elastomer electrically insulating mat with class A insulation conforming to IS: 15652 – 2006 having 2 mm thickness up to 3.3 Kv. (10-6-25)

Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete.(13-15-1)

Supplying, installing, testing & commissioning 3 phase, 11/0.433 kV, 50 Hz., 630 kVA, Mineral oil immersed and naturally cooled outdoor type, Copper wound Non-sealed transformer delta/star connected additional neutral brought out on load side, temperature rise should not exceed 45℃ by thermometer in oil and 50℃ by the resistance method in winding at full load rating, using type A winding insulation (kraft paper) with HV tapping (with off load tap changer) off load +5 to -10 in steps of 2.5%, having 7 number of tap positions , with standard accessories complete with test certificate with losses below 1860 Watts at 50% load, 5300 Watts at 100% load as per IS:1180 (part 1) : 2014 with necessary permissions of Electrical Inspector, as per specification no SS- TR-NSL. 10-1-10

Supplying, erecting, testing and commissioning of diesel generating set with alternator of 250 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %, with performance class G2 and maximum fuel consumption 42.30 Ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 425 Ltr etc. on provided M20 Grade CC Foundation and obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG 11-1-18

Supplying, erecting, testing and commissioning of Microprocessor based Generator Control Unit (Synchronization panel) panel suitable for diesel generating set of 320 kVA capacity Three phase, 415 Volts, 50Hz A.C. with all standard features and safeties etc as per specification no. GEN-SYNC. 11-2-16

Making cement concrete foundation including excavation (60 x 60) cm x deep 1/6 of pole length in 1:3:6 cement concrete 20 x 25 mm stone metal, 45 cm x 45 cm x 45 cm /45 cm dia. x 45 cm. height plinth duly plastered, with necessary curing and finishing complete. (for above 9 m poles) ( 16-3-4)

Making transformer plinth (1.5 x 1.5 x 1.5) m in size with necessary excavation in ground with 150 mm. thick M- 10 PCC at the bottom and top and 250 mm. thick, burnt brick wall constructed at periphery and remaining hollow portion shall be filled with 40mm hard broken aggregate. External surface duly plastered by 12 mm thick including watering etc complete.(16-3-1)

Making cement concrete foundation in 1:2:4 cement concrete with foundation bolts and nuts complete. (cost of wooden box is included) (for pumps). (16-3-5)

Making cement concrete foundation including excavation (60 x 60 x 150) cm deep in 1:3:6 cement concrete, (20 to 25) mm stone metal with necessary curing and finishing complete.(for stay).(16-3-6)

Supplying and erecting ON LOAD four pole automatic transfer switch, 415V, 100-125A, 50 Hz with enclosure, flexibility of neutral connection, line and load reversibility, changeover with phase barriers, source separator, terminal covers along with staggered termination for cable connection and ATS controller with provision of time delay protection of OV, UV, phase sequence changing, single phasing and event logging, connected with provided leads complete complying to IS/IEC 60947-3 Part-1/6 . 5-1-10

Supplying and erecting feeder pillar with 800 A FPMCCB as incomer and 2 Nos 4 Pole . 630 A FP MCCB anf 2 Nos4 Pole 100 A MCCB with aluminium,bus bar 500 V 800 A. complete erected in 14 gauge CRCA sheet box with supporting angles, self locks, gasket and slanting top tobe erected on provided foundation as per per specificationNo. SW-SWR/MFP Size - L-1200 mm, H-1200mm, D-600 mm

Making trench in Hard murum/Tar road having 0.75 m depth and minimum 0.3mtr width as per IS for laying provided cables up to voltage level 1.1Kv cable complete as per specification No. CW-EXN-CTR 16-1-2

Providing and fixing reinforced cement concrete cover of size 60 cm x 45 cm with frame over inspection chamber etc. complete of medium duty (100 Kilogram). 16-2-4

Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 11 kV(UE), 3 x 185 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no. CB-HT 7-3-12

Supplying & laying (including excavation) half round reinforced cement concrete pipe of IS 458:2003 NP-2 class of 250 mm internal diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. 7-6-8

MAIN LT PANEL - HOSPITAL Design,fabrication,assembling,supply,inst allation,testingand commissioning of cubicle type LT panels suitable for415 V 3 phase ,4 wire 50 Hz AC supply system fabricatedin compartmentised design from CRCA sheet steel of 2mm thick for frame work IP 52 and covers,3 mm thick forgland plates i/c cleaning and finishing complete 9 tank process for powder coating in approved shade RAL 7032, extendable type TPN aluminium alloy bus bars of high conductivity,DMC/SMC busbar supports, with bottom base channel of MS section not less than 75mm X 50 mm X 5mm thick, entire panel shall have a common copper earthbar of required size at the rear with 2 nos earthstuds, solid connection from main busbar to switchgearswith require size of aluminium busbar & control wiring with 2.5sqmm FRLS insulated copper conductor cable ,cablealleys ,cable gland plates i/c accessories as per specification and providing switchgears, metering instruments etc. for follwing panelsINCOMER: 630 AMP MCCB 36 KA(Ics=Icu=100% upto 415 V) with R-Y-B & On/off/triplamps, ammeter, voltmeter & multifunction meter.BUSBAR: 800A, 36kA FP Aluminium Busbar with heat shrinkable Sleeves with copper earth bus bar.OUTGOING: (50kA Ics=Icu=100% upto 433V) with on/off/trip indication lamps & multifunction meter O/G 630 Amp FP MCCB. - 3 Nos 200 Amp FP MCCB - 3 Nos 160 Amp FP MCCB - 1 Nos 315 Amp FP MCCB - 1 Nos 100 Amp FP MCCB - 1 Nos 200 Amp FP MCCB - 1 Nos

4WAY FEEDER PILLAR PANEL Design,fabrication,assembling,supply,inst allation,testingand commissioning of cubicle type LT panels suitable for415 V 3 phase ,4 wire 50 Hz AC supply system fabricatedin compartmentised design from CRCA sheet steel of 2mm thick for frame work IP 52 and covers,3 mm thick forgland plates i/c cleaning and finishing complete 9 tank process for powder coating in approved shade RAL 7032, extendable type TPN aluminium alloy bus bars of high conductivity,DMC/SMC busbar supports, with bottom base channel of MS section not less than 75mm X 50 mm X 5mm thick, entire panel shall have a common copper earthbar of required size at the rear with 2 nos earthstuds, solid connection from main busbar to switchgearswith require size of aluminium busbar & control wiring with 2.5sqmm FRLS insulated copper conductor cable ,cablealleys ,cable gland plates i/c accessories as per specification and providing switchgears, metering instruments etc. for follwing panelsINCOMER: 1000 AMP 4P ACB 36 KA(Ics=Icu=100% upto 415 V) with R-Y-B & On/off/triplamps, ammeter, voltmeter & multifunction meter.BUSBAR: 1250A, 36kA FP Aluminium Busbar with heat shrinkable Sleeves with copper earth bus bar.OUTGOING: (50kA Ics=Icu=100% upto 433V) with on/off/trip indication lamps & multifunction meter O/G 250 Amp FP MCCB - 1 Nos 315 Amp FP MCCB - 1 Nos 100 Amp FP MCCB - 1 Nos

EMERGENCY PANEL Design,fabrication,assembling,supply,inst allation,testingand commissioning of cubicle type LT panels suitable for415 V 3 phase ,4 wire 50 Hz AC supply system fabricatedin compartmentised design from CRCA sheet steel of 2mm thick for frame work IP 52 and covers,3 mm thick forgland plates i/c cleaning and finishing complete 9 tank process for powder coating in approved shade RAL 7032, extendable type TPN aluminium alloy bus bars of high conductivity,DMC/SMC busbar supports, with bottom base channel of MS section not less than 75mm X 50 mm X 5mm thick, entire panel shall have a common copper earthbar of required size at the rear with 2 nos earthstuds, solid connection from main busbar to switchgearswith require size of aluminium busbar & control wiring with 2.5sqmm FRLS insulated copper conductor cable ,cablealleys ,cable gland plates i/c accessories as per specification and providing switchgears, metering instruments etc. for follwing panelsINCOMER: 315 AMP 4P MCCB - 1 Nos 36 KA(Ics=Icu=100% upto 415 V) with R-Y-B & On/off/triplamps, ammeter, voltmeter & multifunction meter.BUSBAR: 400A, 36kA FP Aluminium Busbar with heat shrinkable Sleeves with copper earth bus bar.OUTGOING: (50kA Ics=Icu=100% upto 433V) with on/off/trip indication lamps & multifunction meter O/G 32 Amp FP MCB - 19Nos 200 Amp FP MCCB - 1Nos

MAIN LT PANEL-RESI. QUARTER Design,fabrication,assembling,supply,inst allation,testingand commissioning of cubicle type LT panels suitable for415 V 3 phase ,4 wire 50 Hz AC supply system fabricatedin compartmentised design from CRCA sheet steel of 2mm thick for frame work IP 52 and covers,3 mm thick forgland plates i/c cleaning and finishing complete 9 tank process for powder coating in approved shade RAL 7032, extendable type TPN aluminium alloy bus bars of high conductivity,DMC/SMC busbar supports, with bottom base channel of MS section not less than 75mm X 50 mm X 5mm thick, entire panel shall have a common copper earthbar of required size at the rear with 2 nos earthstuds, solid connection from main busbar to switchgearswith require size of aluminium busbar & control wiring with 2.5sqmm FRLS insulated copper conductor cable ,cablealleys ,cable gland plates i/c accessories as per specification and providing switchgears, metering instruments etc. for follwing panelsINCOMER:200 AMP 4P MCCB - 1 Nos 36 KA(Ics=Icu=100% upto 415 V) with R-Y-B & On/off/triplamps, ammeter, voltmeter & multifunction meter.BUSBAR: 250A, 36kA FP Aluminium Busbar with heat shrinkable Sleeves with copper earth bus bar.OUTGOING: (50kA Ics=Icu=100% upto 433V) with on/off/trip indication lamps & multifunction meter O/G 32 Amp DP MCB - 16Nos 63 Amp FP MCCB - 1Nos

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 16 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (7-1-11)

Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP (9-1-1)

Supplying, installation and testing of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete, and recording the results Specification no. EA-MOBI (9-1-5)

Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with insulating and non-corrosive bond with required joints As per specification no. EA-EP. (9-2-7)

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and non-corrosive bond with required joints As per specification no. EA-EP.(9-2-8)

Carrying out core cutting of size 3" to 5" dia x 15" length in the C.C./rock/stone wall with the help of specialized core cutting machine in proper manner and finishing the site as original.(3-11-77)

MSEDCL CHARGES

Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.(6-1-19)

Providing Round bottom fire bucket of 9 Litres capacity as per IS : 2546 made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and red outside with FIRE Mark, on provided stand/ wall hook complete.(Non-CSR)

Providing Floor mounting stand for keeping 4 Nos. of FIRE buckets 1500mm in length, 900mm in height frame made out of 30x30x4 mm angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of silver paint complete.(Non-CSR)

Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete.(13-15-1)

Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kg capacity with necessary clamp for erection on wall.(Non-CSR)

Supplying, installation, testing and commissioning of main fire pump (MFP / EP) suitable for water discharge of 2280 to 2850 LPM at 90 to 70 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 55kW or of suitable kW capacity for manual/automatic operation and consisting of following : (a) Horizontal type, single stage, centrifugal/split casing pump of cast iron body & bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation on with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/SSC/EP (13-1-5)

Supplying, installation, testing and commissioning of jockey fire pump (JP) suitable for water discharge of 180 to 240 LPM at 140 to 110 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 15 kW or of suitable kW capacity for manual/automatic operation and consisting of following : (a) Horizontal/vertical type, multi stage, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft(SS410 grade), mechanical seal conforming to IS 1520. (b) Suitable kW Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003)complete, as per specification no. FF-MFP/JP (13-2-4)

Supplying and erecting G.I. pipe ‘C’ class ERW 25 mm dia with necessary fittings complete as per specification no. FF-PP (13-6-2)

Supplying and erecting G.I. pipe ‘C’ class ERW 50 mm dia with necessary fittings complete as per specification no. FF-PP (13-6-3)

Supplying and erecting ISI mark GI pipe 32 mm. dia ‘C” class at position with accessories complete. Specification no. CW-PLB/GP. (16-5-10)

Supplying and erecting G.I. pipe ‘C’ class ERW 75/80 mm dia with necessary fittings complete as per specification no. FF-PP (13-6-5)

Supplying and erecting G.I. pipe ‘C’ class ERW 100 mm dia with necessary fittings complete as per specification no. FF-PP (13-6-6)

Supplying and erecting G.I. pipe ‘C’ class ERW 150 mm dia with necessary fittings complete as per specification no. FF-PP (13-6-7)

Providing coating of bitumen paint & 4mm thick wrapping for underground 100 mm ring main of fire fighting system. (13-6-9)

Supplying and erecting 100 mm dia cast iron foot valve ball type/flap type with strainer for negative suction complete as per specification no. FF-VL/FV (13-7-2)

Supplying and erecting 150 mm dia cast iron foot valve ball type/flap type with strainer for negative suction complete as per specification no. FF-VL/FV (13-7-3)

Supplying and erecting 100 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV (13-7-20)

Supplying and erecting 150 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV (13-7-21)

Supplying and erecting 100 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV (13-7-24)

Supplying and erecting 150 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV (13-7-25)

Supplying and erecting 25 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL/GV (13-7-32)

Supplying and erecting gun metal single outlet hydrant valve fitted with necessary accessories complete as per specification no. FF-VL/HV. (13-7-34)

Supplying and installing one piece moulded HDPE / fibre water tank for negative suction only, having capacity 1000 litres fitted with necessary accessories complete as per specification no. FF-FFA/PT (13-8-1)

Supplying and installing wall mounting swinging hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose) along with necessary accessories complete as per specification no. FF-FFA/HV (13-8-2)

Supplying and erecting 63mm dia, controlled percolation (C.P.) hose pipe, 15m in length, fitted with necessary accessories complete as per specification no. FF-FFA/CPH (13-8-3)

Supplying and erecting gun metal branch pipe of 63 mm dia fitted with 20 mm dia detachable hexagonal nozzle complete as per specification no. FF-FFA/NZ (13-8-7)

Supplying and erecting 150 mm dia fire brigade header suitable for supplying water in fire tank complete as per specification no. FF-FA/FBC ( 13-8-10)

Supplying and erecting fire brigade header ( Siamese connection )of 150 mm dia, for supplying water in fire tank complete as per specification no. FF-FA/FMC (13-8-11)

Supplying and erecting 300 mm dia 1.5m in height air vessel / tank fabricated from min 5mm thick M.S. sheet complete as per specification no. FF-FFA/ACT ( 13-8-12)

Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV (13-8-13)

Supplying and erecting 12/15 mm dia pressure switch with provided isolation valve, G.I. nipple, elbow, etc complete as per specification no. FF-FFA/PS (13-8-15)

Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, erected with provided G.I. pipe, elbow etc. complete as per specification no. FF-FFA/PG (13-8-15)

Supplying and erecting M.S./CRCA cabinet for housing single hydrant valve of size ( 400 x 400 x 400)mm or hose pipe box of size ( 600 x 600 x 200)mm made from min. 1.5 mm thick CRCA sheet with angle iron work of min. of size (25 x 25 x 4) mm having front doors with viewing glass of size (200x150) mm and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour( Code 538 of IS 5) (13-8-18)

Supplying, erecting, testing and commissioning of quartzoid bulb sprinkler, 15 mm (½") dia. NBCM Body chrome finished, 68º C fixed temperature rating with deflector disc of conventional construction complete as per specification no. FF-SPR.(13-12-1)

Supply, Installation, testing & commissioning of UL listed / FM approved S S Braided flexible drops 25 mm dia capable to with stand maximum working pressure of 175psi with all fittings for making connection to sprinklers andwith the branches 1.2 Mtrs in length

Supplying, installing, testing and commissioning remote response indicators suitable to operate on 5 - 28 V dc supply having FR Polymer ABS Housing complete as per specification no. FF-FAAS/RRI (13-9-9)

Supplying, installing, testing and commissioning FRLS, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU (13-9-10) 2% Add on for FRLS

Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with PVC accessories on wall /ceiling as per specification No: WG-MA/CON. (1-2-4)

Supplying and erecting HMS PVC conduit FRLS grade 32 mm dia. with PVC accessories on wall / ceiling as per specification No: WG-MA/CON.(1-2-5)

Supplying and erecting HMS PVC conduit FRLS grade 20 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.(1-1-7)

Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC. (1-1-9)

Supplying, installing, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the 8 loop capacity and capable of supporting upto 250 devices and detectors per loop, with on-board LCD display with min 16 lines of text, operating at 230 V 50 HZ - AC with inbuilt Battery Backup of a minimum 24 hours in normal condition and 30 min in alarm condition, suitable provision for network connectivity, interfacing with third party equipment via a MODBUS/ OPC/ L-ON interface etc. conforming to IS 15908:2021, IS 2189: 2008, EN 54 & VDS / FM/ UL 864 (10th edition) with 3 years replacement warranty FF-AFAS/CP

Supplying, installing, testing and commissioning of repeater panel with suitable battery backup of a minimum of 24 hours in normal condition and 30 min in alarm condition, 80 backlit alphanumeric LCD display with inbuilt buzzer to indicate fault/fire alarm, manual control keys for silence/mute and to reset the FACP from the repeater station. Panel size shall not more than 175 x 275 x 65 mm conforming to EN 54 or UL approved with 3 years equipment replacement warranty FF-AFAS/RP 13-10-5

Supplying, installing, testing and commissioning of addressable optical smoke detector, single/twin LED’s with 360 degree view, suitable for low voltage 15 to 32 V DC two wires supply, in-built locking mechanism to check the removal and pilferage of the detector, in built isolation mode, start up current 300µA and alarm condition current shall be maximum 6.5 mA, operating temperature 0°C to 50°C, humidity 0-95% RH, IP 41, conforming to IS 2189: 2008, 11360_1985_Reff2020 EN 54 or UL Approved with 3 years equipment replacement warranty FF-AFAS/SD . 13-10-6

Supplying, installing, testing and commissioning of intelligent addressable thermal/heat detector with rate of rise cum fixed temperature thermistor complete with base as required, suitable for temperature variations from -20°C to 38°C for fixed-heat and rate-of-rise type detectors and 0°C to 66°C for high heat type detectors, in built isolation mode, suitable for offices/ceiling cable trenches/less ventilation area's etc. with 3 years equipment replacement warranty IS : 2175 - 1988 reaffirmed 2000, IS 15908:2021 standards FF-AFAS/SD. 13-10-7

Supplying, installing, testing and commissioning of addressable manual call points ( break glass type/pull station type), made of addressable break glass plastic square in shape surface/flush mounted with "Break Glass" massage embedded on the glass, complete erected with mounting base and required accessories conforming to EN 54 or UL listed with 3 years equipment replacement warranty FF-AFAS/MCP. 13-10-9

Supplying, installing, testing and commissioning of addressable fire isolator module complete as required. EN 54 /FM or UL Listed with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 Reed relays FF-AFAS/ISM 13-10-12

Supplying, installing, testing and commissioning of addressable horn cum strobe sound/ hooter, output frequency 500 to 1000 Hz with dB as per Chart given in IS 15908:2021, with flashing at 1 Hz over the strobe’s entire operating voltage range EN 54, conforming to IS 2189: 2008, IS 15908:2021 standards with 3 years equipment replacement warranty FF-AFAS/SSH. 13-10-13

Providing, supplying and fixing self Luminous Exit sign in accordance with BS 5499 as per sample approved byClient ( Fire Exits) Size 450 x 150 mm Non CSR

Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP (9-1-1) ( Main Pump 6 Nos. ,Jocky Pump 2 Panel 2= 10 N0s. )

Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP.(9-2-3) ( 25 x 3 Mm G.I.Strip 80 Mtr X 0.590 Kg/mtr = 47.20 Kg. )

Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC. 1-1-9

Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC. 1-1-10

Supplying and erecting mains with 1x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW 1-3-2

Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW 1-3-2

Supplying and erecting mains with 1x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW 1-3-3

Supplying and erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW 1-3-3

Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete. 1-6-2

Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete. 1-6-11

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. 1-6-34

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. 1-6-35

Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.7TR to 2.0TR capacity having ISEER minimum 3.8 to maximum 4.39 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. APAC/ WAC 3-2-12

Supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia/size 12mm complete. 3-2-26

Supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia/size 16mm complete. 3-2-27

Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 12 mm for solar water heater/AC system. 4-2-9

Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 16 mm for solar water heater/AC system. 4-2-10

Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB 5-3-2

Supplying, erecting & marking DPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB 5-3-6

Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB 5-4-8

Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 41.3mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete 3-11-89

Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 34.9mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. 3-11-90

Supply, installation, testing and commissioning air curtain of 6 feet width having air throw velocity of 21 m/sec, low noise level up to 38 to 46dBA suitable for door height upto 9 feet, working on 1 phase, 230V, 50Hz, A.C. supply. 3-11-76

Supply, installation, testing and commissioning of manually operated, opposed blade, duct mounted, flanged volume control dampers of required sizes in GI construction with operating mechanism, mounting arrangement, rubber refrigerant kits etc. complete. 3-11-80

Supply, installation, testing and commissioning of volume control box with collar for control damper of required sizes in GI construction with operating mechanism, mounting arrangement, rubber refrigerant kits etc. complete. 3-11-81

Supply, fabrication, installation and testing of flexible canvas connections constructed between ductable unit/dampers/ducting of suitable size with fire resist flexible double canvas sleeve complete. 3-11-82

Providing adhesive thermal insulation for supply return air duct with 19mm nitrile rubber insulation having R-value as per the prevailing provisions in ECBC- 2017. 3-11-83

Providing and applying of acoustic insulation for air ducts with 25mm thick, 48 kg/cu.m fiber glass faced with RP tissue and covered with 26 SWG perforated aluminium sheets complete. ( FOR DUCTING-45Sqm PLANT ROOM - 155 Sqm) 3-11-84

Providing aluminium Supply air diffusers / Return air double diflaction grills with coller damper to balance the flow of air from all risers 3-11-85

GSS Ducting:Supplying fabrication installation testing and commissioning of GI. Sheet metal ducting. Zinccoated. Complete with all Standard Accessories, G.I..Hardware, Self Adhesive elastomeric foam gasket, support etc as per SMACNA specification. 22 SWG. 6-1-3

GSS Ducting:Supplying fabrication installation testing and commissioning of GI. Sheet metal ducting. Zinccoated. Complete with all Standard Accessories, G.I..Hardware, Self Adhesive elastomeric foam gasket, support etc as per SMACNA specification. 20 SWG. 6-1-4

Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. 6-1-19

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification. 7-2-31

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification. 7-2-32

Providing & erecting hot dipped galvanised ladder type cable tray (Perforated) manufactured from 16 SWG (1.6 mm thick) GI sheet of 400 mm width & 75 mm height complete with necessary coupler plates & hardware. 7-11-9

Providing & erecting hot dipped galvanised cover suitable for perforated typeCable tray manufactured from 18 SWG `GI sheet of 400 mm width & 20 mm height complete with necessary hardware. 7-11-14

Providing and fixing of Super Hepha filter in machine so we can provide filtered clean air inside the operaton theater with remove at least 99.97% of airborne particles 0.3 micrometers (μm) in diameter. The filter's minimal resistance to airflow, or pressure drop, is usually specified around 300 pascals (0.044 psi) at its nominal flow rate. (Rates are as per Sanct.letter estimate No:- 1532/ 2021-22 )(Rate sanctioned By SE Mumbai estimate) (NON-CSR)

Supplying and fixing of UV Light in the machine to emitts of ultra violet light to distroy mould spores bacterias and viruses Voces preventing them entering in supply air to the Operation theater (Rates are as per Sanct.letter estimate No:- 1532/ 2021-22 )(Rate sanctioned By SE Mumbai estimate) (NON-CSR)

Providing and fixing of Eliminator Mist or Moisture Eliminators remove humidity from moving air. Typically they are used where there is a high likelihood of rain or moisture being drawn into a ventilation system through the air intake vents. The specially designed blade captures the moisture and drains it away in carefully designed drain channels so as no moisture is carried back into the air stream. The Barclay moisture eliminators can be design and manufactured in a range of shapes, sizesand colors to suit your vessel. Also available with coalescent pads this Eliminator helps The polypropylene-bladed moisture eliminators are specially designed to meet many requirements in air treatment. The screwed extruded aluminium frame is extremely solid and gives sturdiness to the whole system. Also available with/without bottom drains (Rates are as per Sanct.letter estimate No:- 1532/ 2021-22 )(Rate sanctioned By SE Mumbai estimate). (NON-CSR)

Supply and installation of Valve station for AHU to regulate the refrigiration insiade the systen with neassary controller wich are present in side the outdoor unit to regulate the refrigirant in side the system for temprature (Rates are as per Sanct.letter estimate No:- 1532/ 2021-22 )(Rate sanctioned By SE Mumbai estimate) (NON-CSR)

Supply,Installation, testing & commissioning of outdoor units. Condensing unit shall be complete with hermatically sealed rotary/ scroll inverter type compressor Including anti corrosive coating. R410A refrigerant, The units should be complete with condensing unit, controls, control panel, wiring, refrigerant piping ,drain piping and all accessories required for a complete system. The wiring and insulated refrigerant piping shall be as required as per the schematic drawing. Power supply for the ODU will be provided near unit and contractor has to take care. ODU should be BMS compactible. Outdoor Units for AHU'S Capacity - 8.5 TR - ( For FM AHU ) (Rates are as per Sanct.letter estimate No:- 1532/ 2021-22 )(Rate sanctioned By SE Mumbai estimate) (NON-CSR)

Supply, testing & commissioning of Display Type Thermostat (Rates are as per Sanct.letter estimate No:- 1532/ 2021-22 )(Rate sanctioned By SE Mumbai estimate) (NON-CSR)

Drain Piping SITC of PVC Drain piping of 6mm thick for the units With 9mm Insulation of Nitrile Rubber and suitable for 6 Kg/cm2 Pressure as per specification 50mm dia (NON-CSR)

Providing fresh air damper with crowl piece,bird screen and removable type prefilters (NON-CSR)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire Un-armoured (strip) cable 3C x 1.5 Sq.mm. (NON-CSR)

SITC of Antistatic Conductive Flooring: Providing & fixing of 2mm thick 100% PVC flexible homogeneous conductive flooring, conforming to static electrical charge EN 1081 104 less then or equal to Rt less then or equal to 106 ohms, calendared compacted floor covering, total weight 2985 g/m2 in sheet of size 2mtrs. x 20 mtrs. in approved pattern & colour combination having wear resistance of less then or equal to 4.0 mm3 as per EN 660.2 and have binder Type I and should have a residual indentation of approx 0.02mm confirming to EN ISO 24343-1 (EN-433). The laid flooring should be colour dyed as a raw mixture to ensure even colour throughout the thickness and its surface should be densely compacted for improving wear and ease of maintenance with Anti-bacterial and fungicidal properties. The flooring shall incorporate a specially formulated Evercare TM Surface Treatment that avoids staining of chemical products used in healthcare like betadine, eosin or anti-bacterial hand gel and increases the durability of the flooring. The laid flooring shall confirm the fire rating Bfl-s1 class as per EN 13501-1, slip resistance of R9 as per DIN 51130 class & colour fastness ec6 degree as per EN 20105-802. The product must be Pentachlorophenol (PCP) free and confirm to Anti-Viral activity (human corona virus 229E) - ISO 21702 _ 99. 7% (after 2h00). It incorporate, bacteriostatic and fungistatic actions, tested for Anti-bacterial activity (ISO 22196 - >99% inhibit the growth of bacteria). It should have low voe contain as 1VOC after 28 days < 10 μg/m3 as per ISO 16000-6. REACH compliant. Floorscore certified. 12 years manufacturer's product warranty. (Copper wire to be used below the flooring). (NON-CSR)

Providing & fixing of multipurpose 1.0mm homogeneous vinyl wall covering which complies with EN649. Roll width of 2 m. fire classification Bs2-DO. PUR Protect surface treatment. Anti-Viral activity (human 2 coronavirus 229E) - ISO 21702 99,37% (after 2h00). Bacteriostatic and fungistatic according to ISO 22196 >99% inhibits growth. 100% recyclable. (For Conventional OT Wall Cladding) (NON-CSR)

SITC OF Anaesthesia Pendant: Double Arm - Supply & Installation of Double Arm Anaesthesia Pendant, 3 with 800 + 800 mm long movable arm, movable by 330°. Having weight carrying capacity of approximately 80Kg, Six Electrical Sockets S/1S ampere & Data Point, one adjustable monitor shelf, one fixed shelf with drawer and 6 nos. of Gas Outlets (NON-CSR)

SITC OF Surgeon Pendant: Double Arm . Supply & Installation of Double Arm Surgeon Pendant with 4 800 + 800 mm long arm having weight carrying capacity of 150Kg, movable by 330°, Six Electrical Sockets 5/15 ampere & Data Point, Twcadjustable monitor shelves, one fixed shelf with drawer and 6 nos. of Ga, Outlets (NON-CSR)

SITC OF Surgeon Control Panel Screen touch type, mounted fiush in the theatre wall, comprising of the following: I No. Day Time Clock 1 No. s Elapse Time Clock I Set dimmer for peripheral/ plan air lights 1 No. hands free telephone I No. Medical Gas status/ alarm I No, HEPA status/ alarm 1 set indicator only for tempera ture and humidity display Size . 650X 650 x115 m w,th all advance features. (NON-CSR)

SITC HEPA Plenum with SS-304 Diffuser grill & Terminal HEPA Filters For genral OT Plenum designed as per NABH standards 1.Plenum MOC: Stainless steel 304, 2. Plenum Si_ze : 3 1800mm x 2400mm (6ft x 8ft) 3. Plenum Diffuser Grill: High quality S.S.304 Diffuser grill for securing Unidirectional air flow according to to EN ISO 14644. SS 304 grill designed to deliver uniform air velocity across the entire HEPA plenum to maintain uniform air displacement on the OT table. 4• Central Opening: Plenum design with opening for OT lamp not more than 600 x 600mm 5. Filter housing and pressure chamber: MOC stainless steel 304 matt polish, thickness 1.2 mm. 6.Filtrer Section : A)Mini-pleat (H14) grade HEPA Filters placed as Terminal Filters B)FIiters to be D.O.P, tested to remove particles up to 0.3.micron. C)FIiters to be 0,0,P, tested to remove particles up to 0.3.micron. 7.Plenum mounted Periphery Hanging - 8 nos. ceiling suspended system (NON-CSR)

SITC X-Ray Film Viewer : LED Type Specifications Light : LED light Display : 2 Film display, - Provision for brightness control Dimensions • 880 x 503 x 29mm, - Auto film insertion Operations : Flicker free luminance for the film viewing purpose Digital Dimmer for high quality film interpretation Installation / Fitment Flushed with theatre wall for hygenic and ease of cleaning Purpose . (NON-CSR)

SITC OF Cascade Pressure Stabilizer having multi 304 graded stainless steel blades to control room ai r pressure Size - 305 X 335 mm (NON-CSR)

SITC OF Storage Unit having two shelves and made out of Stainless steel of grade SS304, having 5 mm thick glass door and mounted flush with the theatre wall and anti microbial coated. (NON-CSR)

SITC OF Writing Board (Size 950 mm x 650 mm) Flush mounted with wall panel surface (NON-CSR)

SITC OF Sensor based Hermetically Sealing type of Sliding / Swing Door having thickness of 40-48mm of size 1500 X 2100 mm single / dual leaf with PUF core sandwiched between Antimicrobial High Pressure laminates {HPL), with viewing window of size 300 X 300 mm. The door leafs hung on extruded heavy duty aluminium alloy extrusion Doorframe for single sid, swing Doors, Sliding Door leafs runs on (nylon wheels) within an extruded heavy duty aluminium alloy extrusion track / frames, for smooth effortless sliding with the help of handle. (NON-CSR)

SITC OF Microprocessor based Electronic Automation (Operator ) for Manual Door for controlling the direction of movements, the acceleration and speed qf the door, with a low noise level pulse generator motor. includes a photocell for users safety. (For sliding door) (NON-CSR)

SITC OF Radar Hand Switch (NON-CSR)

SITC of Foot Switch (NON-CSR)

SITC OF Electrical wiring and condult!ng Inside OT Power distribution within the departments should be provided from distribution boards located local to each theatre Sub mains power to these panels should be by th, general electrical contractor. From these panels all distribution service, within the departments should run. electrical Distribution Board located 7 Inside OT complex lnculding Heavy duty (HMS) PVC conduting, circui wiring (FRLSZH), AntiBactrial Switch Scokets and face plate, PVC bakcboxes etc complete as directed by Engineer-In Charge (NON-CSR)

SITC OF HVAC Ducting Inside OTD s Aluminium ducting with 22 Gauge Sheet including all fixtures and accessories, Insulation with 25 mm thick N1tnle rubber insulation for supply duct and 19 mm thick for return air ducts (NON-CSR)

SITC OF Return air grill made out of 1.5 mm thick Stainless Steel Grade 304 sheet, with damper for return air riser and should be placed at four corners of the OT (NON-CSR)

SITC OF LED Peripheral lights : Recess mounted IP54 Protocol, Non hygroscopic Peri~heral lights having power LED elements with suitable electronic driver and controls. The Peripheral light diffusers fixed in powder coated aluminium frame. (NON-CSR)

SITC OF 2- Bay Scrub Sink, with Infrared Photo sensor, Digital Timer with user defined nme interval 1,3,5 and 10 minutes,! no. mixture valve and I nos. solenoid valves along with Manual Option Foot Operated mechanism/ Foot switch. Anti-splash metal body construction made ol Stainless Steel Grade 304 polished finished . The Scrub Sink is provided w~h front access panel for ease of maintenance and repairs. I - Position sizE 1600mmlong. (NON-CSR)

SITC OF MEDICAL ISOLATION PANEL SINGLE/THREE PHASE 20kVA Fully complies with EN standard IEC 60364-7-710 regulation Electric panels provided with isolation transfonner 230/415V, 50Hz, main switch, bipola1 switches, isolation monitoring device for 230Va.c separated circu~, control panel and alarm completed with mounting box Isolation transformer power (kVA) 20 Main switch ln=63A 1 MTS ln=20A 12 Isolation monitoring device 230/415 Va.c. X Control panel and monitoring alarm 230/415Va.c. X (') lnduding ISOLATION MONITORING DEVICES REMOTE CONTROL ALARM PANEL TECHNICAL INFORMATION Regulation correspondence CE! EN 60439-1/3 Building material galvanized steel Thickness 50 Grey color RAL 7035 Degree of protection IP30 Gass of protection II Equipments (NON-CSR)

SITC OF Ceiling suspended Double skin inline centrifugal fan DIDW Exhausl defumingabon fan, 1200 CFM/25mm Static pressure with necessar) accessories with cabling & earthing, 0.5 HP DOL Starter panel,having IP54/55 etc complete. (NON-CSR)

SITC Hatch Box• Mechanical/Electrical/Pneumatic interlocking which is maintenance-free, fail safe and maintains cleanroom integrity by preventing both doors from being opened at the same time. • The main body of the pass box is constructed of MEDICAL • grade stainless steel ( S.S. 304 ). • The pass box base surface is constructed of stainless steel, making th, work zone easy to clean. • The door of pass box is double skin with the 300*300mm glass at the centre. • Medical grade U.V. tube for sterilization of inside material. Mechanical interlock is required due to one door can be open at on, time, same time another door Is closed. Both doors can not be open at a time. 55 304 Coving Is required Inside the edges mandotary. UV Tubes are required inside the hatchbox ( 2 Nos., 1 Working condition and 1 Standby Condition). It must be operated on 15 Amp. Electrical supply • Internal size of pass box is 750 mm W x 750 mm H x 750 mm L (NON-CSR)

SITC Of PLC based Dedicated AHU control Panel HVAC system _control panel having server based PLC controls for secure remote access in case of maintanene for ensuring minimum downtime. • Auto Temperalure and Humidity control • Built in password protection • Built in data loger, for minimum 30 days • LAN compitable - Remote monitoring control setting _ Master and Slave design • Graphyical format reports The panel will incorporate all the necessary controls for the correct operation and monitoring of the equipment and services with following 1. VFD (Variable frequency drive for motor protection) 2. MCB for AHU 3 MCB for heater 4. MCB for AC 5. Contractor 6, HP/LP trip protection (NON-CSR)

SITC Particle count of air delivered across HEPAfilterAir Validation Bacterial count Air velocity at operating areaClass 100as per ( Federal Standard 209D Class Limits ) Or as per (ISO 14644•1) Classes ISO- s 25,000.00 set 75,000.00< 10 cru./rn3 As per guid e line by International Federation of Infection Conlrol (IRC)0.4 5 m/sec minimum(As per recommendations of ASHRAE HOSPITAL HVAC/NABL approved Lab) (NON-CSR)

SITC Pressure Release Damper Mechanically Adjusted Pressure of 5 • 15 Pascal, Size 300 x 300 mm inside. Outside grill ss 304/poweder Coated size 310x 310 mm. (NON-CSR)

SITC of Electric Traction Passenger Lift with • Rated capacity :- 8 Passenger/544Kg • Floors :- G+1 floor (2 Stops/2 Landings) • Travel :- 20 mtrs • Location of Lift Machine:- MR/MRL • Rated speed :- 1.0 mps VS • Car/Landing door clear opening of 800 mm wide x 2000 mm high • Clear Car size of 1300mm wide x 1100mm deep x 2250mm high • Lift shaft available having clear size of 1900mm wide x 1900mm deep, 1900mm Pit depth, 4500mm Overhead. • Doors type :- COPO/TOPO Doors with frame made from SS 304 grade solid(non-cladded) sheet of 1.5mm thick in hairline finish for car and all landing doors with SS door architraves/frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory). • Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. The lift car interior design shall be done as per the directions of engineer in charge. • COP with SS face plate having metallic push buttons with Braille code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with / without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor. • LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings. • ARD complete with necessary SMF VRLA batteries. • Fireman controller having fireman switch at fire Landing. (CSR - 17-1-3) • CCTV surveillance system comprises of 2 nos minimum 2.0 MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup min. 90 days with min. 18” FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge. • Lift Machine of Gearless PMSM of suitable kW with duty cycle of minimum 120 starts/hr (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory), with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength. • Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work. • Minor civil work such as alteration work if any necessary for erection of landing door frames and it's accessories e.g. sill, header, hole pass etc complete with plaster finish, civil work for erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails, providing and fixing steel girders/RCC work having adequate strength for mounting and hoisting lift machine etc. complete as per specification no. LFT. • General: - Job includes entire procedure of obtaining all necessary erection permissions & "License to Work the Lift" from Electrical Inspector(Lifts) with submission to the Engineer In Charge. • The above rate includes Fully Comprehensive AMC for one year from the date of commissioning. Add on : A2 : For Lift having 800mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade solid (non-cladded) landing door [Two panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows-indicators, extension of guide rails, shaft wiring with trunking, traveling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete.

SITC of Electric Traction Passenger cum Stretcher/Hospital Lift with • Rated capacity :- 20 Passenger/1360Kg • Floors :- G+1 floor (2 Stops/2 Landings) • Travel :- 3 to 4.2 mtrs • Location of Lift Machine:- MR/MRL • Rated speed :- 1.0mps VS • Car/Landing door clear opening of 1100/1200 mm wide x 2000 mm high • Clear Car size of 2000mm wide x 1500mm deep x 2250mm high • Lift shaft available having clear size of 2100mm wide x3000mm deep, 1900mm Pit depth, 4500mm Overhead. • Doors type :- COPO/TOPO Doors with frame made from SS 304 grade solid(non-cladded) sheet of 1.5mm thick in hairline finish for car and all landing doors with SS door architraves/frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory) • Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. The lift car interior design shall be done as per the directions of engineer in charge. • COP with SS face plate having metallic push buttons with Braille code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with / without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor. • LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings. • Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port. The controller shall have necessary protections such as overcurrent, overvoltage, over speed, overheat for all devices including lift motor and travel direction protection, protection for phase loss at input or output etc. various operation modes such as maintenance, change direction by attendant, full load bypass, VIP call operation, self levelling operation, call cancel facility, auto return to home landing, fireman evacuation operation, earthquake operation, door open/close operation from COP etc. The system can record information for minimum 30 latest faults, with real-time clock management and handheld keypad with LCD screen for view and setting of parameters, The control panel duly wired with proper size & strength, copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class. • ARD complete with necessary SMF VRLA batteries. • Fireman controller having fireman switch at fire Landing. • CCTV surveillance system comprises of 2nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for min. 90 days with min. 20" FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge. • Lift Machine of Gearless PMSM of suitable kW with duty cycle of minimum 120 starts/hr (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory), with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength. • Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work. • Minor civil work such as alteration work if any necessary for erection of landing door frames and it's accessories e.g. sill, header, hole pass etc complete with plaster finish, civil work for erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails, providing and fixing steel girders/RCC work having adequate strength for mounting and hoisting lift machine etc. complete as per specification no. LFT. • General: - Job includes entire procedure of obtaining all necessary erection permissions & "License to Work the Lift" from Electrical Inspector(Lifts) with submission to the Engineer In Charge. • The above rate includes Fully Comprehensive AMC for one year from the date of commissioning. Add on For Lift having 1100mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade solid(non-cladded) landing door [Two panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows-indicators, extension of guide rails, shaft wiring with trunking, travelling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete. ( CSR No : 17-1-10 )

Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.1-6-1

Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete. 1-6-10

Supplying and erecting PVC Surface modular switch box with double mounting plate for 4 module duly erected. 1-6-29

Supplying and erecting CRCA powder coated corridor/passage light LED fitting (4 feet) Max. 17W with high transitivity diffuser with system lumens output of Min. 2000 lumens , min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty. 2-1-17

Supplying and erecting bulk head LED fitting max. 10W with high transitivity diffuser with system lumens output of min. 1100 lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., THD<10%, p.f. >0.95, operating range of 140-260V, in built surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, IP66, IK09 rated on provided PVC Block / wooden board with 3 years warranty. 2-1-15

Supplying and erecting exhaust fan heavy duty 230 V, A.C. 50 cycles 375/380 mm. 900 RPM complete erected in position as per specification no. FG-FN/EXF (2-10-16)

Point wiring for light/fan/bell in 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire with flush type switch and required accessories as per specification No: WG-PW/SW 1-7-3

Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB 5-3-3

Supplying, erecting & marking DPMCB 6 A to 32 A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB 5-3-7

Supplying, erecting & marking FPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB 5-3-12

Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 2 ways (2 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB 5-4-7

Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame. 5-4-13

Supplying, fixing and commissioning 2 pole, RCBO 6/10/16/20/25A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCCB/RCBO 5-6-9

Supplying, fixing and commissioning 4 pole RCBO 6/10/16/20/25A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indications per specification no SW-RCCB/RCBO 5-6-12

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 2 core 4 sq mm copper conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU 7-2-9

Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results as per specification no. EA-EP 9-1-2

Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with insulating and non-corrosive bond with required joints As per specification no. EA-EP. 9-2-7 ( 25 X 5 mm Copper Strip @0.67 Kg/ Mtr For 40 Mtr.=26.80 Kg

Supplying and erecting PVC insulated PVC round sheathed 2.5 sq.mm (50 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV 1-3-15

Supplying and erecting Gate/garden light fitting with 300mm dia. glass bowl suitable for upto 12W LED Lamp on provided pipe as per specification No. FG-ODF/GLT(2-5-1)

Providing and erecting galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT (8-2-21)

Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B-22 / E-27 base. (2-8-11)

Supplying, erecting & marking DPMCB 6 A to 32 A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB 5-3-7

Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame. 5-4-13

Supplying and erecting integrated LED street light fitting 40 to 50W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 4400 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K,THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2. (2-4-4)

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.(7-6-11)

Supplying & erecting G.I. pipe ‘A’ class 40 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE(7-6-2)

Providing & erecting 6 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL 8-2-12

Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP 9-1-4

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole).(16-3-9)

Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose).(16-3-7)

Supplying & erecting four pole ON LOAD change over switch, 415V, 40A, open execution having staggered termination, phase barrier, shroud termination and terminal cover along with auxiliary contacts and ready to upgrade with fuse protection kit, rotary handle,operational current category AC23A complying to IS/IEC 60947-3 Part-1/3. 5-1-2

Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB (5-3-13)

Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB 5-3-3

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL(7-1-27)

Supplying & erecting G.I. pipe ‘A’ class 40 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE 7-6-2

Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP ('9-1-1)

Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP. ( 60 Mtrs @0.104 Kg/mtr=6.24 Say 6 Kg 9-2-3

Supplying and erecting minimum Three & above star rated submersible pump set of 3.75 KW/5 HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell suitable for 210 to 860 LPM discharge at 38 to 13 m head & discharge & delivery Pipe of Size-65mm diameter with a necessary H type clamps as per specification No. WP-SMP 12-2-6

Supplying and erecting minimum Three & above star rated submersible pump set suitable for erection on open well of 3.75 KW/5 HP with 415 V 50 c/s. A.C. supply, having delivery head from 43 to 11m and discharge from 120 to 840 litres. per minute & pipe of Suction 65mm / Delivery 50 mm diameter erected with necessary H type clamps as per specification No. WP-OSP 12-3-2

Supplying and erecting minimum Three & above star rated submersible pump set suitable for erection on open well of 5.625 KW/7.5 HP with 415 V 50 c/s. A.C. supply, having delivery head from 36 to 14m and discharge from 225 to 1680 litres. per minute& pipe of Suction 75 mm/Delivery 65 mm diameter erected with necessary H type clamps as per specification No. WP-OSP

Supplying & erecting Water level controller 230/415 V, A.C. , Four way under ground & Over head tank operation only. 12-4-15

Supplying & erecting automatic control panel for 3 Phase , 415 volt, A.C, Submersible/centrifugal pump set up to 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc .('12-4-17)

Supplying & erecting flat flexible 3 core 6 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete. 12-4-10

Supplying and erecting high density polythene pipe ISI mark 50 mm. dia. suitable for pressure of 6 kg. / cm2 connected to jet/submersible pump with required material complete. 16-5-18

Supplying and erecting CI flange 50 mm. dia with necessary nuts bolts and washers with rubber seal in position complete. 16-6-27

Supplying & erecting Float sensor switch for water level controller working on 250V & rated current 8A, with 2 mtr. wire & High quality of wire & plastic body. ('12-4-28)

Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW (1-3-1)

Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC. (1-1-9)

Supplying and erecting ISI mark GI pipe 50 mm dia.‘B’ class at position with accessories complete as per specification no. CW-PLB/GP.('16-5-6)

Supplying and erecting ISI mark GI pipe 65 mm. dia. ‘B’ class at position with accessories complete. Specification no. CW-PLB/GP.

Supplying and erecting 65 mm dia. gun metal foot valve at position with necessary materials complete.('16-6-4)

Supplying and erecting 50 mm dia. gun metal sluice valve at position with necessary materials complete.('16-6-15)

Supplying and erecting non return valve 50 mm dia in position made of gun metal complete.('16-6-21)

Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.(1-1-10 )

Supplying and erecting HMS PVC conduit FRLS grade 32 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC. (1-1-11)

Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with PVC accessories on wall /ceiling as per specification No: WG-MA/CON. (1-2-4)

Supplying and erecting HMS PVC conduit FRLS grade 32 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC. (1-1-11)

Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW (1-3-2)

Supplying and erecting green colour earthing with 1x 1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW 1-3-2

Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.(1-6-1)

Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete.(1-6-2)

Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.(1-6-10)

Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.(1-6-11)

Supplying and erecting PVC Surface modular switch box with double mounting plate for 3 module duly erected.(1-6-28)

Supplying and erecting modular type telephone socket one gang with safety shutter, duly erected on provided plate and box with wiring connections complete.(1-6-15)

Supplying and erecting modular type computer Jack RJ45 with safety shutter, duly erected on provided plate and box with wiring connections complete.(1-6-17)

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.(1-6-34)

Supplying & erecting 2 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, Nylon Rip Cord & grey colour sheathed with FR PVC, conforming to ITD specification S/WS 113C laid in provided PVC casing capping/conduit as per specification No. WG-TW 1-8-1

Supplying & erecting 50 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, Nylon Rip Cord & grey colour sheathed with FR PVC, conforming to ITD specification S/WS 113C laid in provided PVC casing capping/conduit as per specification No. WG-TW 1-8-7

Supplying, erecting & commissioning MDF Box 100x100 pairs made from min. 1.5mm thick MS sheet as per specification no. WG-TW 1-9-2

Supplying, erecting & commissioning 30 pairs FR junction box with moulded plastic enclosure as per specification no. WG-TW 1-9-13

Supplying, erecting & commissioning 10 pair module for connection & disconnection of telephone cable as per specification no. WG-TW 1-9-18

Supplying and installing, testing & commissioning of digital (hybrid) type EPABX of 6 x 32 extensions suitable upto 96 extensions complete. 1-9-26

Supplying, installing, testing & commissioning push button telephone instrument desk top/wall mount with caller ID & Speaker unit as per specification complete.(1-9-29)

Supplying, installing, testing & commissioning key telephone / IP telephone instrument as per specification complete. 1-9-30

Supplying and installing cat-6 cable suitable for networking as per specification no. WG-COC/NC 1-10-1

Supplying and fixing 1 m UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC (1-10-16)

Supplying and fixing 3 m UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC(1-10-19)

Supplying and erecting LSZH armoured multimode optical fibre cable with 6 fibres, core dia 50/125 µm (OM3), suitable upto 10 GBPS, ethernet distance at 850 nm of wavelength, on wall/ceiling or laid in provided pipe/trench as per specification no. WG-COC/OFC LSZH 1-10-8

Supplying and fixing 3 m UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC(1-10-19)

Supplying, fixing, and configuring 24 ports + (4 SFP+) POE switch, 370W, 6KV surge protection on ethernet port and console port for management on provided rack as per specification No. WG-NWC/ENS 1-11-9

Supplying, fixing, and configuring 20 Ports+4G Combo, Managed Layer 2, POE Switch erected in provided rack complete.('1-11-6)

Supplying, fixing, and configuring 1-port mini-GBIC SX MM fibre transceiver (up to 550m, support 3.3V power) erected in provided rack complete.(1-11-16)

Supplying and fixing tool-less IO (Ethernet) flush/surface type in provided modular box as per specification no. WG-NAS/IO 1-12-2

Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP('1-12-4)

Supplying and fixing 12 ports light guide unloaded interconnect unit, wall mounted type, with adapter panel for termination of optical fibre cables on wall in provided U rack complete as per specification no. WG-NAS/ LIU('1-12-6)

Supplying and fixing 12 ports light guide unloaded interconnect unit, rack mounted type, with adapter panel for termination of optical fibre cables in provided U rack complete as per specification no. WG-NAS/ LIU 1-12-5

Supplying and fixing SC/LC type multimode pigtails (OM3) for LIU to terminate OFC in LIU as per specification No. WG-NAS/LIU2('1-12-13)

Supplying and fixing SC/LC type multimode pigtails (OM3) for LIU to terminate OFC in LIU as per specification No. WG-NAS/LIU2 1-12-13

Supplying and fixing 9U wall mount rack (Dimension-DxWxH – 500x600x500 mm) as per specification No. WG-NAS/RAK('1-12-18)

Supplying and fixing 22 U floor mount rack (Dimension-DxWxH – 800x600x1176 mm) as per specification No. WG-NAS/RAK ('1-12-22)

Supplying, fixing, and configuring 8-ports 1 G unmanaged gigabit POE switch erected in provided rack complete.('1-11-1)

Supplying, fixing, and configuring Supplying Installation testing and commissioning of 32 Channel HD Network Video Recorder : Quad-core embedded processor Embedded LINUX IP camera INPUTS - 32 Channels two way talk 1 Channel Input/2 Channel Output RCA interface 2 HDMI 2VGA RESOLUTION - up to 3840 × 2160; 2688x1520 Multy screen dusplay 32 Ch 1/4/8/9/16/25/36 compression smart compression smart H.265+ - 2nd HDMI output FISHEYE VIDEO DE-WARPING Supported in local and web user interface FRAME RATE 1-15 fps (12 MP and 8 MP); 1-25/30 fps rest of the resolutions) RECORD BIT RATE- 320 Mbps BIT RATE- 16 kbps ~ 20 Mbps per channel RECORDING MODE Schedule (Regular/Continuous Motion Detection Alarm); Manual; Stop RECORDING INTERVAL 1 to 120 minutes (default 60 min) PRE-EVENT RECORDING INTERVAL 1 to 30 seconds POST-EVENT RECORDING INTERVAL 10 to 300 seconds VIDEO DETECTION AND ALARMS TRIGGER EVENTS Recording; PTZ; Tour; Alarm; Video Push; Email; FTP; Snapshot; Buzzer VIDEO DETECTION Motion Detection-MD Zones: 396 (22 × 18); Video Loss; Camera Blank ALARM INPUT 16 Channels RELAY OUTPUT 6 ChannelsSUPPORTED PROTOCOLSHTTP TCP/IP IPv4/IPv6 UPnP RTSP UDP SMTP NTP DHCP DNS IP Filter PPPoE DDNS FTP Alarm Server IP Search P2P MAXIMUM NUMBER OF USERS - 128 users for PC communication and keyboard RS 495-1 port for PC PTZ control Certification CE FCC UL listed (3 years warranty) (Non CSR)

Supplying, fixing, and configuring Supply and Installation of 8 TB (7200 RPM) Surveillance hard disk 8 TB storage capacity with SATA support 6GB/s NCQ 64 MB cache 3.5 inches (3 years warranty) (Non CSR)

SITC of 5 MP Full IP Bullet Camera Complete. Camera Sensor 1/2.7", 5.0 megapixel, progressive scan, CMOS Lens [email protected] Distance 60 Meter Detect Shutter Auto/Manual, 1 ~ 1/100000s Colour: 0.01Lux (F2.0, AGC ON) Minimum Illumination 0Lux with IR onDigital noise reduction 2D/3D DNR Day / Night IR-cut filter with auto switch (ICR)S/N >52dBIR Range Up to 30m (98ft) IR rangeWavelength 850 nmIR On/Off Control Auto/ManualDefog Digital DefogWDR DWDRVideo Compression Ultra 265, H.265, H.264, MJPEGH.264 code profile Baseline profile, Main ProfileFrame Rate Main Stream: 5MP (2592*1944), 30 fps; Sub Stream: 720P (1280×720),30 fps, Video Bit Rate 128 Kbps~16 MbpsOSD Up to 4 OSDs Privacy Mask Up to 4 areas ROI Up to 2 areas Motion Detection Up to 4 areas Image Compression, colour, brightness, sharpness, contrast, white balance, exposure control, Backlight compensasion. Auto/ Outdoor/Fine Tune/Sodium Lamp/ Locked / Auto 2Digital noise reduction 2D/3D DNRSmart IR Support FlipNormal/ Vertical / Horizontal /180°Dewarping NAHLC SupportedBLC Supported Network Protocols IPv4, IGMP, ICMP, ARP, TCP, UDP, DHCP, RTP, RTSP, RTCP, DNS, DDNS, NTP, FTP, UPnP, HTTP, HTTPS, SMTP, SSL, QoSInterface 10/100M Base-TX Ethernet Compatible Integration ONVIF (Profile S, Profile T), Built in microphone, Password Protection, IP adress Filtering, User access log, along with IP 66 Protection BOX, Operating temprature- 0 to 50 degree C, API Certifications Certifications CE: EN 60950-1/UL: UL60950-1/FCC: FCC Part 15 (3 Years Warrenty)

SITC of 5 MP Full IP Dome Camera Complete. Camera Sensor 1/2.7", 5.0 megapixel, progressive scan, CMOS Lens [email protected] Distance 60 Meter DetectShutter Auto/ Manual, 1 ~ 1/100000s Colour: 0.01Lux (F2.0, AGC ON) Minimum Illumination 0 Lux with IR onDigital noise reduction 2D/3D DNR Day / Night IR-cut filter with auto switch (ICR) S/N >52dBIR Range Up to 30m (98ft) IR rangeWavelength 850 nmIR On/Off Control Auto/ManualDefog Digital DefogWDR DWDRVideo Compression Ultra 265, H.265, H.264, MJPEGH.264 code profile Baseline profile, Main ProfileFrame Rate Main Stream: 5MP (2592*1944), 30 fps; Sub Stream: 720P (1280×720), 30 fps, Video Bit Rate 128 Kbps~16 MbpsOSD Up to 4 OSDs Privacy Mask Up to 4 areas ROI Up to 2 areas Motion Detection Up to 4 areas Image Compression, colour, brightness, sharpness, contrast, white balance, exposure control, Backlight compensasion. Auto/ Outdoor/ Fine Tune/Sodium Lamp/ Locked / Auto 2Digital noise reduction 2D /3D DNRSmart IR Support Flip Normal/ Vertical / Horizontal /180° Dewarping NAHLC SupportedBLC Supported Network Protocols IPv4, IGMP, ICMP, ARP, TCP, UDP, DHCP, RTP, RTSP, RTCP, DNS, DDNS, NTP, FTP, UPnP, HTTP, HTTPS, SMTP, SSL, QoS Interface 10/100M Base-TX Ethernet Compatible Integration ONVIF (Profile S, Profile T), Built in microphone, Password Protection, IP adress Filtering, User access log, Along with Tamper Resistant casing Box. Operating temprature- 0 to 50 degree C, API Certifications Certifications CE: EN 60950-1/UL: UL60950-1/FCC: FCC Part 15 (3 Years Warrenty)

Supplying & erecting 65" professional LED display with 1920 *1080 ( Full HD) Display, suitable for 64 channel NVR and following features Brightness: minimum 500 Cd/m2 Contrast Ratio: minimum 1000:1 Viewing angle: 178/178 deg. Response time: maximum 8 ms Inputs: HDMI, VGA, BNC,USB, Audio In, Built-in speakers maximum 10 W, Suitable to operate on 100-240 V 50 Hz AC supply and 24/7 Duty Cycle duly erected on wall or table top with standard accessories like wall mount stand and wiring connections etc. complete as per specifications no. CCTV-MON

Shah EPC Services & Projects Private Limited (BID ID -6206072)