PROVN OF 250 MTR SECURITY FENCING WITH BARBED WIRE AND CHAIN LINK FENCING AT BACK SIDE OF NOOK MESS FOR 190 MTN BDE UNDER GE TAWANG

Amount

Excavating in post holes (or similar holes) each not exc 0.5 Cum, getting out, returning filling in and ramming earth or broken rubble mosed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance n exc 50M and making good surface and getting out hard/dense soil.

M & L for cement concrete post holes walls or retaining walls, any thickness,size or shape including pilasters, butttressses columns, pillars boundary pillars n type C2 1:3:6 (40mm graded aggregate)

S & F for FE 410-W (Gde-E-250) Quality A joist, channel, angle or tee section fixed independently without connectiong plates etc cut to ordinary length within 20mm of the length indicated)

S & F for hand rails, half round or other steel section or core for wooden hand rail straight portion, drilled and countersunk for balusters running bars, for doors, blusters, nosing to steps including embeding in concrete and screwing etc, wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes notching for wire etc including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165

S&F mild steel screw bolt (machine made) with hexagonal at one ends and screwed the other ends, each screwed ends to be fitted with washer and one hexagonal nuts, size of bolt 12mm dia and length (from under side of head to the end in 75mm), complete all as specified and directed.

Supply of chink link MS galvanised fencing any size or type

Fixing only chain link fencing including line wires any mesh, size and type to any type of standards rails, straining bolts, etc including provision of binding wire.

S & F for galvanised, 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75mm spacings and straining and fixing to sny type of standard rails straining bolts, including securing rying at crossings with and proision of galvanised mild steel wire, staples or steel pins as directed (each line wire to be measured

S & F of round bars 10mm dia and over cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not lesss than 0.90mm dia or securing with clips quality conforming all as specified and directed.

M & L for two coat of synthetic enamel paint over a coat of red oxide zinc chrome on new steel surfaces complete.

M/S P D ENTERPRISES

M/S THONGDOK ASSOCIATES

PARBIN SIDDIKI

KAILSON

M/S ACE BUILDERS

M/S L.N. TRADERS

M/S P W ENTERPRISES