8119/SAR-46/E8 PROVN OF CERTAIN CYCLE STAND AT MD ACCN FOR NCS(E) AND DSC AT AF STN SARSAWA

Amount

Surface excavation n.exc (not exceeding 30cm deep and averaging 15 cm deep and getting out in soft/loose soil

M&L for excavating in trenches not exc 1.50 mtr wide and not exc 1.50m in depth for foundation, etc not exc 10 sqm on plan area and not exc 1.50 m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning filling in including spreading levelling, watering and well ramming inlayers not exc 25cm

Removing excavated materials to a distance not exc 50 mtrs and depositing where directed at a level not exc 1.50 mtr above the starting point complete all as specified and directed.

M&L for PCC (1:4:8) type D2(using 40mm Crust graded stone agg) as in foundations, fillings and mass concrete complete all as specified and directed.

M&L for Reinforced cement concrete (Design mix) M25 (20mm Crust graded stone aggregate)for foundation, including rafts, footings, foundation beams, bases for columns, etc complete all as specified and directed.

M&L for Reinforced cement concrete (Design mix) M25 (20mm Crust graded stone aggregate) for columns, piilars, posts and struts etc complete all as specified and directed.

M&L for Reinforced cement concrete(Design mix) M25 (20mm graded aggregate) for brace beams cantilever bressummers lintels over 1.5m span etc complete all as specified and directed.

M&L for Reinforced cement concrete (Design mix) M25 (20mm Crust graded stone aggregate) for slab supported walls, Retaining walls, basement walls, ballest walls and the like any thickness above top of the footings; including attached pilasters and buttress etc complete all as specified and directed.

M&L for brick work with flyash bricks, straight or curved on plan exc 6m mean radious built in CM 1:4 complete all as specified and directed.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4, rendering is to be finished even and smooth without using extra cement

Rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:3, with WPC as per manufacturer instruction complete all as specified and directed.(WPC to be paid seperately) complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for Rendering 5mm thick on fair faces of brick work/concrete works (CM 1:4)and for ceilling etc complete all as specified and directed

M&L for formwork to sides of concrete foundation, footins, bases of columns, rafts and raft beam sides and soffits(if any) of foundations and plinth beam and similar work vertical or battered rough finished surfaces of concrete curved plane etc complete aall as specified and directed.

M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions for circular plane complete all as specified and directed.

M&L for formwork sides and soffits of floors or roof beam, beam hanchings, girders, bressum-mers, lintels, cantilevers, shelves including supports as in girder etc comlete all as specefied and directed.

M&L for formwork to soffits of suspanded slab such as roof slab floor slab and similar work etc complete allas specified and directed

Steel bars 10mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding width and including mild steel wire (annealed) not less then 0.9mm dia or securing with clips quality conforming to TMT bars complete all as specified and directed.

ditto for sl.no 18 but 6mm to 8mm dia bars complete all as specified and directed.

ditto for sl.no 18 but 5mm and over upto and including 10mm dia in stirrups, spaces and binders complete all as specified and directed.

M&L Cement concrete 100mm thick type D-2 1:4:8(40mm Crust graded aggregate as in sub base complete all as specified and as directed.

M&L Cement concrete 50mm thick type B-1 1:2:4(20mm graded aggregate as in flooring complete all as specified and as directed.

M&L for PVC dividing strip, 1.5mm thick 28mm wide and inserted in position complete all as specified and as directed

M&L for a coat of Bitumen 85/25 @ 1.20 Kg/Sqm in roof complete all as specified and as directed

M&L for preparation of new plastered surface of wall and apply three coat of white wash complete all as specified and as directed.

M&L for preparation of new plastered surface of ceiling and apply three coat of white wash complete all as specified and as directed.

M&L for preparation of new plastered surface of wall and apply two coat of cement base paint over a coat of primer complete all as specified and as directed.

M&L for forming embankments including raising (or lowering) earth obtained from item No 2 above, spreading in layers n exc 30cm thick watering ramming and finishing to required size shape etc n,exc 1.5m high from base complete all as specified and directed.

M&L for hardcore of broken stone or boulders 75mm thick n.exc 63mm deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for PCC 50mm thick type C-2 1:3:6 (20mm graded aggreagate) complete all as specified and as directed.

RAJAN TRADERS

SUBHASH CHAND CONTRACTOR

NAQLI LAL SHARMA AND ARUN SHARMA