PWD/SE/JJR/B.garh/Special repair of Toilet at Govt. College of Bahadurgarh in Jhajjar

Amount

Dismantling Brick Work, Tile Masonry or Tile lining and Tile Terracing. (HSR 8.5) (i) dry brick work

Removing door and windows (wood and steel) with together with the dismantling of walls (HSR 8.17) (a) Doors

Vantilation

Dismantling cement conglomerate terrazzo floors 25 mm to 50 mm thick including concrete bases (HSR 8.25)

Cement concrete 1:4:8 with stone aggregate 20 mm nominal size in foundation and plinth. (HSR 10.38)

First class brick work laid in cement sand mortar 1:6 in first storey up to 4 metres above plinth level(HSR.11.7)

Providing & Fixing Ist quality Ceramic glazed wall tiles confirming to I.S. 15622 (thickness to be specified by the manu-facturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-In-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including ointing in white cement mixed with pigment of matching shades complete. (b) Size of ceramic Glazed tiles 300 x 450 mm of reputed manufacturer like:- RAK, NITCO, KAJARIA shall be used as approved by Engineer-in-charge. HSR 14.92(b). Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material.

Laying and fixing Granite stone in all shades 15mm to 18mm thick in skirting/dado, risers of steps, pillars and wall facing, laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of granite including labour for fixing cramps pins and dowels etc. (Ex-cluding the cost of granite stone) (HSR 14.95)toilet

Factory manufactured solid flush door shutters, with block board core as per I.S. No. 1659-1969 bonded with water proof type phenol formaldehyde synthetic resin, hot-pressed, conforming to I.S. 2202 part I. and II, fixed in position, including iron hinges, screws, chocks/cleats and stops etc. (HSR 17.93) (a) Commercial veneering with vertical grains or cross bands and face veneer on both sides commercial facing with laminated core and lipped edges:- Note:- (iii) 35 mm thick

Providing and fixing glazing in aluminium door, windows, ventilator shutter and partitions etc. with Pvc/Neoprene gasket etc. complete (cost of aluminium snap beading shall be paid in basic items). (HSR 17.98) (a) with flet glass panes of 40 mm thickness.

Pressed steel sheet frames (chowkats), consisting of 2mm thick steel sheet of the specified section, including iron lugs (hold fasts), iron hinges, conforming to P.W.D. specifications including polls for fixing stops, lock Notch, provision for receiving towerbolts and finished with one coat of ready mixed paint red lead Non setting primer, of approved quality, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame, and cement concrete 1:3:6 for lugs complete :- (HSR 18.34 ) a) Door and window frame of size 89 mm x 50 mm with 40 mm wide single rebate

P.H Item Providing fixing PVC rain water pipe 6kg pressure of ISI mark in cement mortar during masonry work.(HSR 13.89) (a) 100 mm dia PVC pipe 6kg presure

(b) 150 mm dia PVC pipe 6kg presure

Providing & fixing PVC bend ISI mark(HSR 13.90) (a) 100 mm dia PVC Band

(b) 150 mm dia PVC Band

Labour for laying jointing, fixing and testing G.I./P.V.C./W.I. pipe lines and specials tees bends, sockets elbows etc., inside building and testing etc. complete including cutting threading. (HSR 28.18) a (Excluding cost of special ) (i) 15 mm internal diameter of pipeline

(ii) 20 mm internal diameter of pipeline

Providing & fixing in position best indian make (to the approval of the Engineer-in-charege).indian type orissaor orya water closet suite for sinking into floor, with raised foot treads complete with 100mm HCI 'P' with or without vent as required and all other necessary fittings as fully (HSR.30.2) (a) size 580 mm thick (i) white

Providing and fixing in position best indian make (as approved by the engineer-in-charge European type water closet suite, syphonic type consisting of- (i) VITREOUS CHINAWARE SYPHONIC SUITE WITH 15 LITRES CAPACITY MATCHING CHINAWARE CISTERN and all internal brass fittings COMPLETE WITH ‘P’ or ‘S’ TRAP with or without vent; (as approved by the Engineer-in-charge). (ii) One piece SEAT AND LID IN HOLLOW BLACK OR WHITE PLASTIC fitted with chromium plated hinges and rubber buffers, (to the approval of the Engineer-in-charge) COMPLETE in all respects INCLUDING CUTTING AND MAKING GOOD THE WALLS AND FLOORS. (HSR-30.5) (b) Double trap syphonic W.C Suite (ii) Single Color.

Providing and fixing in position best indian make flat back or angular liped fron urinal 465 mm high consisting of :- i) Flat back lipped fron urinal basin of Vitreous china ware ( to the approval of the Engineer-in-chief ) HSR-30.19

Providing and fixing in position best Indian make a range of four squatting urinals in vitreous china-aware with two nos. 5 ltr capacity C.I automatic flushing cistern with fitting and flush pipe complete as fully describe in item no. 30.33 above (HSR - 30.36) (ii) Single Colour

Providing and fixing 25 mm thick marble partitions for different type of erinals (HSR 30.40) (a) 375 mm x 750 mm

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE (ORDINARY) LAVATORY SUITES consisting of Lavatory in VITREOUS CHINAWARE s ize as give below ( to the approval of the Engineer- in-c harge) including china plug for tap hole where necessary ; R.S. or C.I.BRACKETS for building into wall including painting;32mmC.P.BRASS WASTE WITH C.P. brass chain and rubber plug;15mm C.P.BRASS SCREW DOWN PILLAR TAP WITH jam nuts or couplings best design (as approved by the Engineer-in-charge) ALL FITTINGS BEST INDIAN MAKE (HSR.30.41) (Single colour ) (ii) Size 450 mm x300 mm with one no. tap

Providing and fixing in position 32mm Dia G.I waste pipe embedded in wall or lead waste pipe (weighing 3.47 Kg per meter and 2.8mm thick ) upto floor level including cost of wipped solder joint etc. complete (as required by the Engineer - in - charge) HSR-30.48

Providing & fixing in position 15mm i/d C.P. brass bib cocks of best quality (as required by the Engineer-in-chargre). (HSR 30.75) (a) Bib cock long body

Providing and fixing HDPE water storage tanks of sintex, diplats, o.k suprememake with covers/lids marked with IS:12701 on roof top of buildings including cost of hoisting and placing in position, making connections with inlet and outlet pipes.(HSR.30.119) 1000 Ltr. capacity Note:- 1. in case of any difference in the Unit & nomenclature of any HSR item of Civil. P.H. work depicted in this DNIT and the given in HSR, the unit and nomenclature given in HSR shall be applicable. 2. Only reputed make material will be used (make / brand exhibited in HSR and exhibited in approved standard document) as approved by Engineer-in-charge, while executing various items / works at site.

Rajesh Goel

SHIVA CONSTRUCTIONS

Rajat Sehrawat

HIMANSHICONSTRUCTION

Jitender Singh