Renovation and reconditioning of cable trench , main drain , peripheral lighting with Repairing of oil soak pits at 33 kv 11 kv main sub station MRSS Dhori Area.

Amount

Supplying and fixing of 32mm dia X 2.00 metres long G.I.pipe (medium class) bracket for mounting of fluorescent/HPMV/HPSV street light fitting on pole including bending the pipe to the required shape,2nos 40mmX3mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required.

Supply of metallic pole 80 mm GI pipe medium class 6 mtr length (6*777.67)

Erection of metallic pole of following length in cement concrete1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.Above4.5metreandupto6.5metre

Supplying and drawing following sizes of FRLS PVC insulated copper conductor ,single core cable in the existing surface/recess steel/PVC conduit as required. (4x6sq.mm)

Laying of one number PVC insulated and PVC Sheathed /XLPE Power cable of 11kV grade of following size in the existing masanory open duct as required Above 120sqmm and upto 400 sq mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Upto 35 sq. mm

Providing, installation of distribution box of strip with powder coat paint of mcb of 63 amps with auto timer & operational contactor unit of 630 amps for dusk to dawn operation .

Painting with two coat of aluminum paint and one coat of red oxide primer of approved brand and manufacture to give and even shade on new steel tubular poles installed in overhead line .

Fixing of LED Street Light of 90 watt on pole .

Supplying and installing following size of perforated painted with powder coating M.S .cable trays with perforation not more than 17.5% , convenient sections , joined with connectors , suspended from the ceiling with M.S.suspenders including bolts & nuts , painting suspenders etc as required. ( 300 mm width X 50 mm depth X 1.6 mm thickness)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size).

12mm cement plaster of mix 1:6 (1 cement : 6 fine sand).

Brick work with common burnt clay F.P.S.(non modular) bricks of class designation 5.0 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand).

Excavation of the cable trench in trenches, in hard rock not exceeding 1.5 meters in width and lift upto 1.5 meters , including getting out the excavated soil and disposal of excavated soil as directed within a lead of 50 meters .

Earthing with copper earth plate 600mm X 600mm X 3mm thick including accessories , and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal /coke andsalt as required.

Providing and fixing Chlorinated Poly vinyl Chloride (CPVC) pipes , having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement , trenching , refilling & testing of joints complete as per direction of Engineer in Charge. External work (65 mm nominal size )

Providing and fixing Chlorinated Poly vinyl Chloride (CPVC) pipes , having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement , trenching , refilling & testing of joints complete as per direction of Engineer in Charge. External work (25 mm nominal size )

Providing and fixing brass bib cock of approved quality : 20 mm nominal bore

Providing and fixing H.T. danger notice plate of 250mm X 200mm ,made of mild steel ,at least 2mm thick,and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

Supplying and laying 25mm X 5mm copper strip at 0.50 metre below ground as strip earth electrode , including connection / terminating with nut , bolt , spring , washer etc. as required. ( Jointing shall be done by over lapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

Total impact of GST for the purpose of CTC