SPL REPAIRS TO PATH PAVEMENT AREA IN MAIN OFFICE AREA AND TO BLDG NO P-82 OF 102 INF BN (TA) PUNJAB AND SPL REPAIR TO WALL FENCING AROUND 271 TRANSIT CAMP AT MIL STN KALKA UNDER GE JUTOGH

Amount

Dismantling posts & struts; (wood, steel or R.C.C) any section, including taking out embedded portion & making good distributed ground complete all as specified and directed. (Post embeded in natural ground)

Dismantling fencing wire mesh, any type and removing from site complete all as specified and directed.

Excavation in tranches n. exc. 1.50 m wide and n. exc. 1.50m depth for foundation, footings, plinth beams etc. in hard/ dense soil complete all as specified and directed.

Demolition of brick/ precast cement concrete blocks walling and removing of debris out side premices complete all as specifed and directed.

Taking down cement plaster on brick or stone wall etc. including racking out joints, hacking for key and scrubbing down with water etc. complete all as specified and directed.

Returning filling in including spreading, levelling watering & well ramming in layers n. exc. 25cm thick in each layers complete all as specified and directed.

Excavation in post holes (or similar holes) each n. exc. 0.5 cum in hard/dense soil and getting out returning filling in and ramming earth or broken rubble mixed with eareth around in layers not exc. 25 cm watering and removing surplus soil to a distance n. exc 50 m and making good surface complete all as specified and directed.

M&L for plain cement concrete (1:2:4) type B-2 (using 40 mm graded crushed stone aggregate) as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses coloumns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate in foundation filling and mass concrete, sub base or levelling course complete all as specified and directed

S&F mild steel work as in post and struts in fencing including cutting tops to shape as directed drilling holes, notching for wire etc. flat iron fillets securing wire mesh including all necessary drilling and bolting and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for mild steel TMT bar 10 mm dia & over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia as specified .

S&F mild steel screw bolts (machine made) dia of neck exceeding 5 but not exc 10 mm with hexagonal or square head at one end and screwed the other end or screwed both end, each screw end to be fitted with washers and one hexagonal or square nuts, n.exc 5cm long complete all as specified and directed.

Supply only MS chain link fencing 4mm dia, GI plain wire, 100x100mm mesh. complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh size and type to any type of standard rails, straining bolts etc, including provision of binding wire, complete all as specified and directed.

S&F galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolt, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins complete all as specified and directed. (Each line wire to be measured)

S&F in repair galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolt, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins complete all as specified and directed. (Each line wire to be measured)

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in coping rounded and chamfered on edges, including necessary form work complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces finished surfaces even and smooth with out using extra cement complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on surface other than fair faces of brick work or one side of lathing finished surfaces even and smooth with out using extra cement complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description not exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of any description wood, steel, iron, concrete, brick, stone etc over 10 cm width or girth and applying two coats of black bituminous paint complete all as specified and directed.

M&L for preparation of old treated surfaces of wall and applying one coat of cement base paint complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer suitable for cement base paint all as specified & directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) removing of rubbish outside premices as directed by Eng-in-charge complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings exceeding 15 cm thickness (below or above ground level) removing of rubbish outside premices as directed by Eng-in-charge complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base including finishing the surface even and fair complete all as specified and directed.

M&L for providing 20mm thick screed bed in CM 1:6 finished even and rough for laying floor finishes complete all as specified and direced.

M & L for rubber moulding precast interlocking paver block of any size any shape conforming to IS -15658 - 2006 of 60 mm thick, M-35 Grade, with grey cement and pigment set over and cushining as required complete all as specified and directed.

M&L for durastone/ endura tile of size 300x300mmx10mm or 400x400mmx10mm thick in floors/ skirting etc. set and join ted with neat cement slurry with grey cement and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Prepolished chequered cement concrete tiles 300 x 300 x 22-25mm thick set, jointed and pointed in neat coment slurry in floors with grey cement and pigment complete all as specified and directed.

Removing excavated material (soil) to a distance n.exc 50m and depositing where directed at level not exc 1.5m above the starting point complete all as specified and directed.

m/s jupiter builders

AAR PEE ENTERPRISES

M/s Krishan Aggarwal

Babu Ram Sud and Sons

M/S Dahiya Builders