30118/02/E3

(a)PART-I: ESSENTIAL DETAILS OF ITEMS / STORES / SERVICES REQUIRED FOR PORTA CABIN. (i) Supply, Transportation and Installation of Prefabricated Flat Pack Modular High Altitude Containerized Living Shelter of size 6.00 mtr x 3.00 mtr upto height of 2.90 mtr (ii) Internal Size - Size 5.84 mtr x 2.84 mtr x 2.70 mtr. Detail tender drawings are provided along with revised RFP (iii) Anchorage if necessary to stabilize the structure due to wind load shall be provided by vendor. (iv) The shelter should be able to be easily dismantlable for transportation. (v) The Shelter parts like floor. Walls, Roof etc. should be capable of assembling & disassembling by 5-6 men & Hydra Crane in 7-8 Hrs. PUF flooring incl all fixing arrangements complete all as per specifications mentioned in tender documents and as directed by Engineer-in-Charge at site: Note :- The rate of hardware and sealant is deemed to be included in the said item. S & F plywood 19 mm thick, grade BWR, type BB, fixed with screws to timber frame work or steel frame work complete all as specified and directed.S & F 2 mm thick aluminium chequered plate sheet on flooring complete all as specified and directed.S & F 80 mm thick PUF wall panels incl all fixing arrangements complete all as per specifications mentioned in tender documents and as directed by Engineer-in-Charge at site: (b) PART -II: SANITARY FITTINGS Stainless steel premium /1st quality wash down water closet EWC closed pattern incl all necessary accessories like rag bolts/ gel gasket etc with cover complete alll as specified.S & F for PVC low level flushing cistern of 10 ltrs capacity syphonic action type white body with intel ball valve float and handle including bracket and flush pipe etc complete and connecting to WC with PVC flushing pipe and PVC connection 450 mm long.S & F 15mm dia stop valves cast copper alloy, fancy type, chromium plated with long shank and cup screwed down high press with crutch or butterfly handle both ends for iron pipe S & F 15mm dia bib taps cast copper alloy fancy type with crutch or butterfly handle screwed down , screwed for iron pipe or union. Note : Also specified in RFP and as directed by Engr-in-charge (c) PART -III: ELECTRIC SUPPLYS & F Electric items. Internal electrification of the shelter shall be carried out all as per ISI marked. Details of electric fillitngs are as under:- (i) DB’s SPN 8 way 240V (Qty-01 Nos) Make: Havells / Bajaj / Crompton / Phillips (ii) MCB SPN 32 A 240 Volt (Qty-01 Nos) Make : Havells / Bajaj / Crompton / Phillips (iii) MCB SPN 6 to 32 A 240 Volt (Qty-06 Nos) Make : Havells / Bajaj / Crompton / Phillips (iv) Point Wiring for Light/fan/bell (Qty-10 Nos) Make : Finolex/Polycab/Plaza (v) Point Wiring for 5 Amp Socket Outlet on independent Board (Qty- 4 Points) Make : Finolex/Polycab/Plaza (vi) Point Wiring for 5 Amp Socket Outlet on same Board (Qty - 2 Points) Make : Finolex/Polycab/Plaza (vii) Point Wiring for 15 Amp Socket Outlet on independent Board (Qty - 2 Points) Make : Finolex/Polycab/Plaza (viii) Switch Piano 5 Amp (Qty – 15 Nos) M Note: Aslo specified in RFP and as directed by Engr-in-charge (d) Material. All material required for the manufacturing of shelters will be new and will comply with relevant IS as applicable and those given succeeding para. The Building shall be considered and manufactured as per IS: 875 for structural design. Steel used shall be conforming to IS: 2062/2011 for steel for general structural purposes. The material should provide insulation against extreme cold weather condition.ver is later. Complete all as specified and as directed.

Stand -alone- Toilet. The size of each stand alone toilet 2mtr x2mr x 2.90mtr with supply and fitting of stainless steel premium/ 1st quality wash down water closet EWC closed pattern incl all necessary accessories like rag/ gel gasket etc with cover complete all as specified, S& F for PVC level flushing cistern of 10ltrs capacity symphonic action type white body with intel ball valve float and handle including bracket and flush pipe etc complete and connecting to WC and PVC flush pipe and PVC connection 450mm long, S& F 15mm dia stop valve s cast copper alloy fancy type, chromium plated with long shank and cup screwed down high pres with crutch or butterfly handle both end for iron pipe, S & F 15mm dia bib taps cost copper alloy fancy types long body cast copper alloy CP with capstan head, S & F 600mm x 450mm bevelled edge mirror of selected quality mounted on 6mm thick AC building board on commercial Ply board, S & F peg set Chromium plated with six hook suitable distance apart fixed complete all as specified, S & F chromium plated soap dish weighing atleast 125gm fixed in complete wash basin 300mm x300mm including PVC waste pipe 600mm Lont PVC connection 300mm long and chromium plated waste coupling of size including brackets cutting and pinning in ends of buckets complete, supply and fixing switch piano flush type 5 amps one Way 230 volts, ceiling rose 3 terminal size 50 x65mm surface type 230 volts complete, LED light fitting 1 x20 Watt 220V, AC decorative box type with driver, holde including LED tube rod connecting up iwth three core flexible copper wire of suitable size of ceiling. M & L for sub main wring with twin single core 4 sqmm PVC insulated and unsheathed 11 volts grade, stranded copper conductor ISI marked down into PVC casing capping/ concealed and one coninous run of 2.50 sqmm copper conductor PVC insulated (Green colour) as earth wrie fixed into PVC casing caping concealed completed all as specified and directed by engineer in charge. M & L on site LLDPE septic tank designed to carry sewage and sullage water excavation in ay tpye of soil PCC1:4:8 belwo foundation Vent shaft connection etc completed for 10 users, S & F 3-layer PP-R polypropylene random copolymer concealed pipes 20mm outer dia SDR7.4 (PM16) UV stabilizer and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fitting fixed, S & F rectangular moulded polyethylene water storage tanks of 300 ltrs capacity jacketing with PIF panel including ball cock brass of size 20mm dia with polyethylene ball and inlet , outlet including was out with plug/over flow pipe and anti mosquito rose coupling at one end hoisted and fixed in position as specified.