Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.7 CrAccepted-AOC UNIT NO 1 10TH FLOOR VB CAPITAL SURVEY NO 209 CTS NO 2709 RANGE HILLS ROAD SHIVAJINAGAR PUNE | PUNE | PUNE | MAHARASHTRA | ₹15.7 Cr | L1 | Accepted-AOC Accepted at Bid value |
| 2 | L2₹16.1 CrRejected-Finance | ₹16.1 Cr | L2 | Rejected-Finance Rejected Due to Accepted L1 |
| 3 | L3₹17.4 CrRejected-Finance | ₹17.4 Cr | L3 | Rejected-Finance Rejected Due to Accepted L1 |
Tender Value
₹17.4 Cr
EMD Value
₹8.7 L
Closing Date
17 Jun 2022, 2:00 pmClosed
Chairman and Managing Director
MAHARASHTRA STATE WAREHOUSING CORPORATION, GULTEKADI,MARKET YARD,PUNE-37
Construction of New Administrative office building with ancillary works at Gultekdi Pune
2022_CMTDM_799179_1
MSWC/ENGG/3/2022-23 SR NO 1
Open Tender
Civil Works
540 days
Gultekdi Dist Pune
Please refer Tender documents.
8 documents required · 8 mandatory
₹3,540
₹8.7 L
24/05/2022
18 Oct 2022
18 May 2022
20 Jun 2022
18 May 2022
17 Jun 2022
18 May 2022
24 May 2022
Amount
Removing steel Tubular truss of 22M span from roof including purlins and stacking the materials as directed with all leads and lifts etc. complete.
Removing galvalume Sheets from roof including stacking the materials as directed with all leads, lifts etc. complete.
Dismantling brick masonry in lime or cement mortar dispose of the debris and other unserviceable material, transporting the same to the PMC approved dumping ground, with due permissions of the local authorities, at his own cost. as directed with all leads, lifts etc
Dismantling the R.C.C. Work 1:2:4 dispose of the debris and other unserviceable material, transporting the same to the PMC approved dumping ground, with due permissions of the local authorities, at his own cost as directed with all leads, lifts etc.
Dismantling stone masonry in lime or cement mortar dispose of the debris and other unserviceable material, transporting the same to the PMC approved dumping ground, with due permissions of the local authorities, at his own cost as directed with all leads, lifts etc.
Removing rich mix cement concrete dispose of the debris and other unserviceable material, transporting the same to the PMC approved dumping ground, with due permissions of the local authorities, at his own cost as directed with all leads, lifts etc.
Removing Stone metal & murum from Plinth Filling including Excavation, dispose of the debris and other unserviceable material, transporting the same to the PMC approved dumping ground, with due permissions of the local authorities, at his own cost. transportation ,Labour etc Complete as directed with all leads, lifts etc.
Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete
Removing Steel Rolling Shutters with guide Channel, Housing box,Springs,Suspension Shaft,Laths,Locking Rail Etc. and stacking the materials as directed with all leads, lifts etc. complete
Creditng the removed material like Trusses, Purlins , Rolling shutter and windows etc including loading ,unloading and shifting at contractors location. Note :- Entire dismentailed structural steel qty and amount of this item will be deducted through this item.
Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 metre beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting, dewatering etc. complete. (Lift upto 1.5 metre) by Mechanical Means.As directed by Engineer in charge..
Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting, dewatering etc. complete. (Lift from 1.5 metre) by Mechanical Means.As directed by Engineer in charge...
Excavation for foundation in hard murum and boulders including removing the excavated material up to a distance 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting, dewatering etc. complete. (Lift upto 1.5 metre) by Mechanical Means.As directed by Engineer in charge..
Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting, dewatering etc. complete (lift upto 3.00 metre) by Mechanical Means.As directed by Engineer in charge..
Excavation for foundation in Hard rock by chiselling, wedging, line drilling, also with pockland etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/ murum watering, ramming etc. complete. (Lift upto 4.50 metre) by Mechanical Means.As directed by Engineer in charge..
Conveying the materials obtained from excavation including laying in layers, breaking clods, dressing to the required lines, curves, grades and section for all leads & lifts from the site of excavation to the site of deposition away from building ,to the PMC approved dumping ground, with due permissions of the local authorities, at his own cost. transportation ,Labour etc Complete. as directed engineer in charge.
Filling in plinth and floors with approved excavated material in 15 centimetre to 20 centimetre layers including watering and compacting etc. complete, As directed by Engineer in charge... Spec. No. : Bd.A. 11/Page No. 262
Filling in plinth and floors with contractors material/ brought from outside and approved by Engineer incharge in layers of 15 centimetre to 20 centimetre including watering and compaction etc. complete.As directed by Engineer in charge.. Spec. No. : Bd.A. 11/Page No. 263
Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 centimetre to 20 centimetre thick including hand packing and compacting etc. complete.As directed by Engineer in charge..
Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper.
Providing preconstructional antitermite treatment as per I.S. 6313 (Part-I) to the soil along the external face of building by punching holes of 1.2 of 1.5 C.M. diametre about 30 -60 cm deep at 15 cm c/c as close to the wall as possible and to inject 0.5 percent of aldrin or clorophyrifos at the rate of 7.5 litres per hole and sealing the same with proper filling and covering 10 years guarantee on bond paper.
Providing and fixing 20 to 25 milimetre thick rough shahabad box type waterproofing for basement or underground floor on a base of Cement concrete 1:3:6, including sub base of 2.50 centimetre thick Cement mortar 1:3 with conceal, setcrete (RMW), Algaeproof or other alike water proofing liquids, raking of joints upto 35 milimetre depth,filling the joints with 6 milimetre size crushed metal, hand grouting with cement slurry, curing and cleaning, with 7 years guarantee on court fee stamp of Rs. 100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete).
Providing and fixing 20 to 25 milimetre thick rough shahabad box type waterproofing treatment to vertical outside faces of Reinforced Cement concrete walls of basement or underground floor including filling the gap of 25 milimetre between rough shahabad and Reinforced Cement concrete walls with cement grout mixed with water proofing liquid Algaeproof or other alike with one tile lift method, brushing the joints horizontally with cement slurry mixed with water proofing liquid for width 30 to 35 milimetre and sloping coping over topmost tile with cement mortar 1:3, butting the bottom most with Cement concrete 1:2:4 mixed with water proofing liquid, curing, with 7 years guarantee on court fee stamp of Rs. 100/- with ponding test etc complete. (excluding Cement concrtete 1:3:6 base concrete).
Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-15 of trap/ granite/ quartzite/ gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, plywood/ steel formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface including all lead , lift and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand V.S.I. Grade).As directed by Engineer in charge..
Providing and laying in situ/ Ready Mix cement concrete Mix-25 of trap/ granite/quartzite/ gneiss metal for Reinforced Cement Concrete work in foundations like raft, strip foundations, grillage and footings of Reinforced Cement Concrete columns and steel stanchions etc. including bailing out water, steel centering formwork, laying/ pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided, including all lead , lift and curing (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade).
Providing and laying cast in situ/ Ready Mix cement concrete Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided along with all lead , lift and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete with fine aggregate (Crushed sand V.S.I. Grade). As directed by Engineer in charge..
Providing and laying Cast in situ/ Ready Mix cement concrete Mix-25 of trap/ granite/quartzite/ gneiss metal for Reinforced Cement Concrete Beams and Lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/ pumping, compactionand roughening the surface if special finish is to be provided including all lead , lift and curing etc. etc. complete. (Excluding reinforcement and structural steel), with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete with fine aggregate (Crushed sand V.S.I. Grade). As directed by Engineer in charge..
Providing and laying Cast in situ/ Ready Mix cement concrete Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Slabs, Landings, waist Slab & steps of staircase as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/ pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided including all lead , lift and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade).
Providing and laying Cast in situ/ Ready Mix cement concrete Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Chajja as per detailed design and drawings including steel centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided along including all lead , lift and curing etc complete (Excluding reinforcement and structural steel), with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade). As directed by Engineer in charge..
Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Pardi of required thickness including steel centering, formwork, cover blocks, laying/ pumping, compacting, curing, finishing and rougheningthem if special finish is to be provided including all lead , lift and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade).As directed by Engineer in charge..
Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-20 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/ pumping, compacting , including all lead , lift and curing, finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel), with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade).As directed by Engineer in charge..
Providing and laying Cast in situ/ Ready Mix cement concrete Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Canopy as per detailed design and drawings including steel centering, formwork, cover blocks compacting ,including all lead , lift and curing , finishing and roughening the surface if special finish is to be provided and curing complete (Excluding reinforcement and structural steel), with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade). As directed by Engineer in charge..
Providing and fixing in position Thermo Mechanically Treated (TMT) FE -500 bar reinforcement of various diameters for Reinforced Cement Concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches including all lead , lift etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.As directed by Engineer in charge..
Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc.as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/ bolted/ welded connections with out connecting plates, braces etc. and including one coat of anticorrosive paint and overit two coats of oil painting of approved quality and shade including all lead , lift etc. completeAs directed by Engineer in charge..
Providing structural steel work of rectangular hollow steel section for steel trusses, other similar trussed items like purlin and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/ bolted/ welded connections and one coat of anticorrosive paint and overit two coats of oil painting of approved quality and shade including all lead , lift etc complete.As directed by Engineer in charge..
Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/ Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting,including all lead , lift etc complete.As directed by Engineer in charge..
Providing second class Burnt Brick masonry with conventional /Indian Standard type bricks in cement mortar 1:6 in foundations and plinth of inner walls /in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering complete.As directed by Engineer in charge..
Providing second class Burnt Brick masonry with conventional /Indian Standard type bricks in cement mortar 1:6 in superstructure of inner walls /in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and including all lead , lift and curing etc complete.As directed by Engineer in charge..
Providing Autoclaved Areated Concrete block masonary of Ecolite or equivalent make conforming to IS:2185(Part 3)- 1984 in extra fine jointing mortor of fixoblock of UltraTech or equivalent in superstructure including striking joints, racking out joints including all lead , lift and curing etc. and scaffolding complete.
Providing Autoclaved Areated Concrete block masonary of Ecolite or equivalent make conforming to IS:2185(Part 3)- 1984 in extra fine jointing mortor of fixoblock of UltraTech or equivalent in Half brick thick wall including striking joints, racking out joints including all lead , lift and curing etc and scaffolding complete.As directed by Engineer in charge..
Providing and applying gypsum plaster (with Gypsum material of Gypsum India/ Mega Sign or equivalent make) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface/ or on newly brick surface (Excluding rough cast plaster) in all position including preparing and Finishing the surface scaffolding including all lead , lift and curing etc. complete.As directed by Engineer in charge..
Providing internal cement plaster 12 milimetre thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding along with all lead , lift and curing etc. complete.As directed by Engineer in charge..
Providing neeru finish to plastered surfaces in all positions including scaffolding and including all lead , lift and curing etc. complete.As directed by Engineer in charge..
Providing & laying water proof treatment of terrace slab with B.B. Coba in all position with an average thickness of 150 milimetre consisting specialised materials as per the manufactures specifications and covering 10 years guarantee on court fee stamp paper including all lead, lift, etc. complete.As directed by Engineer in charge..
Providing water proof bedding for flooring of bath and water closet, 25 milimetre thick in cement mortar 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, including all lead, lift,Curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etc. complete.As directed by Engineer in charge..
Providing waterproof plaster in water closet and bath 12 milimetre thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 kilogram per bag of cement of approved make and manufacturer and curing,including all lead, lift, etc. complete. (Excluding Tiles)As directed by Engineer in charge..
Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 milimetre thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 milimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding,including all lead, lift, etc. complete.
Providing and applying impression 24 carrat Luxury paint of approved make & approved brand Emulsion paint to interior walls and ceilings of approved quality, colour and shade to new surface in two coats, including sub surface prparation by Acrylic putty and Acrylic primer coats including scaffolding, preparing the surface, including all lead, lift,etc. complete (Low VOC).As directed by Engineer in charge..
Providing and applying antipeel paint of approved make & approved brand exterior Emulsion paint of approved quality, colour and shade to old and new surface in two coats, including exterior acrylic primer coat, scaffolding, preparing the surface including all lead, lift, etc. complete (Heat Reflective Paint).As directed by Engineer in charge..
Providing and laying in situ cement concrete M-20 with tremix treatment for 100 milimetre thickness for flooring with groove cutting of 4 milimetre wide and 20 milimetre deep with necessary refilling with bitumen including all lead, lift,etc. complete.As directed by Engineer in charge..
Providing and laying vitrified matt finish tiles for Skirting having size 590 milimetre to 605 milimetre x to 605 milimetre of 8 to 10 mm thickness and confirming Indian Standard 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning including all lead, lift etc complete. As directed by Engineer in charge..
Supply & Fixing of Rock / Stone Finished outdoor vitrified flooring Tiles 16 mm thick and required width wide in plain pattern including Cement float, filling joints, with neat cement slurry, Natural sand, curing, cleaning including all lead, lift etc complete. with prior approval of concerned General Manager ( Engineering).
Providing and laying Antiskid Ceramic tiles of approved quality of size 30 centimetre x 30 centimetre and conforming to Indian Standard 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing, including all lead, lift etc complete.As directed by Engineer in charge..
Providing and laying ceramic tiles of RAK/ Kajaria/ Nitco/Asian or equivalent make having size 30 centimetre x 45 centimetre for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing including all lead, lift etc . complete.As directed by Engineer in charge..
Providing and laying telephone black/ Amba White/ Cadbury Brown/ Ruby red/ Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. on Cement Mortar 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, including all lead, lift etc complete.As directed by Engineer in charge..
Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite/ Amba White /Catbary brown/ RBI red/ Ocean Brown granite stone partition with full moulding the edges, including all lead, lift etc complete.Both side polish.As directed by Engineer in charge..
Providing sills of required material 20 mm to 25 mm thick, on a bed of cement mortar 1:4 including cement float, filling joints withne at cement slurry, curing, moulding edges, including all lead, lift etc complete.polishing,cleaning complete. b) Granite.As directed by Engineer in charge..
Sliding Window- 3 Track (2 Glass shutter + 1 flymesh) of approved make with DGU, providing and fixing of Sliding Window- 3 Track (2 Glass shutter + 1 flymesh ). For details refer to Specifications. As directed by Engineer in charge.
Providing and fixing 30 milimetre thick Made Solid Panel Poly Venyl Chloride Internal Door Shutter consisting of frame made out of Mild Steel tubes of 19 gauge thickness and size of 40 milimetre x 20 milimetre for stiles, top, lock and bottom rails. Mild Steel frame shall have a coat of steel primers of approved make and manufacture. Mild Steel frame shall be covered with 5 milimetre thick heat molded “Rajshri” Poly Venyl Chloride ‘C’ channel of size 30 x 100 milimetre forming stiles, and 5 milimetre thick, 125 milimetre wide Poly Venyl Chloride sheets for top rail, lock rail and bottom rail on either side and 15 milimetre (5 milimetre x 3) thick, 20 milimetre wide cross Poly Venyl Chloride sheet as gap insert for top rail and bottom rail. Paneling of 10 milimetre thick prelam Poly Venyl Chloride sheet to be fitted in the Mild Steel frame welded/ sealed to the stiles and rails with 30 milimetre wide x 5 milimetre thick Poly Venyl Chloride sheet beading on either side and joined together with solvent cement adhesive. An additional 5 milimetre thick Poly Venyl Chloride strip of 20 milimetre width is to be stuck on the interior side of the ‘C’ channel using Poly Venyl Chloride solvent cement adhesive including stainless steel fixtures and fastening complete, as per direction of Engineer-in- charge.
Providing and fixing in position powder coated aluminium louvered windows ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 milimetre x 1.22 milimetre box type, 5 milimetre thick sheet glass louvers, of approved quality complete.As directed by Engineer in charge..
Providing and fixing machine cut machine polished 18 milimetre to 20 milimetre thick telephone black/ Amba White/ Cat bary brown/ Ruby Red/ Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning ,including all lead, lift etc complete.As directed by Engineer in charge..
Providing and fixing frame with / without ventilator of size as specified with teak wood for doors and windows including chamferring, rounding, rebating, iron holdfast size 300 milimetre x 40 milimetre x 5 milimetre with oil painting complete. As directed by Engineer in charge..
Providing and fixing in position, Double shuttered aluminium extruded powder coated openable door of overall size 1.50 metre x 2.40 metre or as specified with aluminium door frame of powder coated section 101.60 x 44.75 milimetre, 3.18 milimetre thick and shutter compr Indian Standard Institute ng of powder coated section having bottom and lock rail of size 150 milimetre x 44.5 milimetre, 2.90 milimetre thick top rails 47.62 x 44.45 milimetre, 3.18 milimetre thick, vertical style 47.62 x 44.45 milimetre, 3.00 milimetre thick and for shutter plain glass panes 5 milimetre thick for top panels and 12 milimetre thick both side laminated phenol bonded particle board panels for bottom panels, Indian Standard I. mark, heavy duty, Hydraulic floor spring of 150 kilogram capacity, having heavy duty concealed lock, necessary beeding, glazing clips, Poly Venyl Chloride gaskets, 250 milimetre length tower bolts, 150milimetre diameter m. pad handle, as per detailed design and drawing or as directed by engineer in charge including all materials, labours and equipments.
Providing and fixing 40 milimetre diameter and 1.5 milimetre thick Stainless steel hand railing in S.S. 304 Grade including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe complete. As directed by Engineer in charge..
Providing and Fixing mat finish stainless steel (of 302 grade) railing with top pipe of 50 milimetre diameter and vertical pipe of 38 milimetre diameter at 0.60 metre center to center or as required and horizontal pipes of 25 milimetre diameter in three rows, all pipes of 2 milimetre thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 milimetre diameter above newel post of 75 milimetre diameter etc. complete (Prior approval of sample and brand by Ex.Engineer is necessary before use).
Providing and fixing in position Gypsum board false ceiling with 12.5 milimetre thick Gypsum boards, screwed/ fixed to the under structure of suspended galvanised iron Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 milimetre maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete.As directed by Engineer in charge..
Providing and fixing 15 milimetre thick eco-friendly densified edge calcium silicate fall ceiling (like aeroltie) of approved texture spintone/cosmos/hexa or equivalent of size 595 milimetre x 595 milimetre in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections (galvanising at the rate 12 gram per square metre including both sides) consisting of main “T” runner suitably spaced at joints to get required length and size 24 x 38 milimetre made from 0.33 milimetre thick (minimum ) sheet, spaced 1200 milimetre center to center and cross “T” of size 24x28 milimetre made of 0.33 milimetre thick (minimum ) sheet to be interlocked at the middle of the 1200 x 600 milimetre panel to form the grid of size 600 x 600 milimetre resting on periphery walls/partitions on a perimeter wall angle precoated steel of size 24 x24x 3000 made of 0.4 milimetre thick (minimum) sheet with the help of all plugs at 450 milimetre and laying 15 milimetre thick densified edges calcium silicate ceiling tiles of approved texture (spintone/ cosmos/ hexa) in the grid, including light fittings, fixtures, smoke detectors, wherever required. Main “T” runners suspended from ceiling with using Galvanised Iron slotted cleats of size 25x35x1.6 milimetre fixed to ceiling using 12.5 milimetre diametre and 50 milimetre long dash fasteners, 4 milimetre Galvanised Iron adjustable rods with galvanized steel levels clips of size 85x30x0.8 milimetre, spaced at 1200 milimetre center to center along main “T” bottom exposed with 24 milimetre of all T-sections shall be prepainted with polyester baked paint, for all heights, as per specifications, drawings complete. (currently this item should be used only for VIP cabins).
Providing and fixing collapsible steel gate in one/ two leaves with hot rolled vertical channels of 18 x 9 x 3 milimetre minimum size, crossings of mild steel flats of size 18 x 5 milimetre T or E section for runner of minimum 40 x 6 milimetre size for flange, mild steel flat for top runner of minimum size 40 x 12 milimetre with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 milimetre max. spacing of vertical channels be 100 milimetre enclosed gate position and clear space of 150 milimetre between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer & oil painting etc. complete. (I.S. 10521-1983).
Providing and fixing machine cut both side mirror polished 18 milimetre to 20 milimetre thick telephone black granite/ Amba White/ Cat bary brown/ Ruby Red/ Ocean Brown granite stone partition with rounding the edges including all lead, lift etc. complete.As directed by Engineer in charge..
Providing and laying in concealed walls/ ceilings/ floors 15 mm dia. medium grade having embossed as ISI Mark galvanised iron pipes of 1.25 Kilogram/ metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint, 2 coats complete. Including necessary scaffolding and removing existing pipeline if necessary and conveying and stacking as directed etc. complete.As directed by Engineer in charge..
Providing and laying in concealed walls/ceilings/floors 20 mm dia. medium grade having embossed as ISI Mark galvanised iron pipes of 1.63 Kilogram/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint, 2 coats complete. Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking as directed etc. complete
Providing and laying in concealed walls/ceilings/floors 25 mm dia. medium grade having embossed as ISI Mark galvanised iron pipes of 2.49 Kilogram/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking as directed etc. complete
Providing and laying in concealed walls/ceilings/floors 32 mm dia. medium grade having embossed as ISI Mark galvanised iron pipes of 3.20 Kilogram/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking as directed etc. complete
Providing and laying in concealed walls/ceilings/floors 40 mm dia. medium grade having embossed as ISI Mark galvanised iron pipes of 3.68 Kilogram/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking as directed etc. complete
Providing & Fixing 6 mm thick Fundermax or Equivalent make Density-1.45 g/cm3 (EN-ISO-1183-1) Max exterior `F' quality 1.30 x 2.80 m. board with proper Aluminum box framing of size 35 x 35 x 2mm in labour, wastage, transport, taxes, leads, lifts, scaffolding,supported with necessary brackets of required size including all vertical 470mm & Horizental 600mm fastening fixtures, fittings and necessary arrangement as directed by Engineer in charge
Providing and laying in trenches 40 milimetre diameter medium grade having embossed as Indian Standard Institute Mark galvanised iron pipes of 3.68 kilogram per metre with necessary fitting, remaking good the demolished portion with filling trenches and with primer of anti-corrosive primer oil paint two coats complete.As directed by Engineer in charge..
Providing and laying in trenches 50 milimetre diameter medium grade having embossed as Indian Standard Institute mark galvanised iron pipes of 5.17 kilogram per metre with necessary fitting, remaking good the demolished portion with filling trenches and with primer of anti-corrosive primer oil paint two coats complete.As directed by Engineer in charge..
Providing and fixing C.P. BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge.
Providing and fixing Shower Head with shower arm of approved make shower tube hand shower with divertor of spout including all necessary pipe fittings and connections etc. complete as directed by Engineer in charge.
Providing and fixing Poly Venyl Chloride Rain water pipes of 160 milimetre outer diameter and having wall thickness of 2.2 to 2.7 milimetre confirming to Indian Standard 13592-1992 including proper rainwater receiving recess with Poly Venyl Chloride plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25 milimetre to 40milimetre from face of wall a fixing with clips of approved quality and number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on Cement Concrete or masonry blocks, including necessary scaffolding and maintenance for 3 years for any leakages or dislocations of pipes. All the Poly Venyl Chloride fittings and additional 2 piece socket clips shall be got approved from engineer in charge complete. (The contractor shall give 3 years guarantee bond for payment).As directed by Engineer in charge..
Providing and fixing Oval Type Under Counter Wash Hand Basin of 420 x 590 x 195 milimetre size with pillar cock, C.P.Angular stop cock, long thread of approved make continental including SS bottle trap of necessary pipe connection up to the outside face of the wall, having Telephonic Black / Colour Granite of 180 milimetre thick fixed on Black Kadappa Framework, etc. Complete as directed by Engineer in charge.
Providing and fixing white european type wall-hung, of size 360 milimetre x 360 milimetre x 575 milimetre with flush valve of approved make including soil pipe, vent pipe upto outside face of wall, 100 milimetre dia C.I. plug bend inlet pipe all fittings,cutting & making good walls, floors etc as directed by Engineer in charge.
Providing and fixing 15 cm rigid Poly Venyl Chloride Nahani trap including Poly Venyl Chloride grating, bend, connecting piece of Unplasticised Poly Venyl Chloride pipe up to the outside face of wall, making the good damaged surface and testing complete. ( Prior approval of sample and brand by Ex. Engr. is necessary before use).
Providing structural glezing using min.6mm thick saint-gobain make reflective glass in any shade as per requirement.it includes aluminium framework of rectangular aluminium tube of size 64mm X 58mm and electro coloured to 15 microns .the aluminium extrusions is manufactured asper IS 63400.dow corning 995 silicone Structural Glazing sealant is to be used for fixing glass with aluminium frame.high quality expansion bolts with good load bearing capacity is to be used for fixing aluminium frame to wall.it also includes scaffolding and other necessary fittings. As directed by Engineer in charge..
Providing and fixing 15 centimetre x 10 centimetre salt glazed stoneware gully trap in cement concrete 1:4:8 out side the building including cast iron grating in the sink, connecting glazed stonewre pipe brick masonry chamber with cast iron lid and cast iron grating for the gully trap.As directed by Engineer in charge..
Providing and fixing 450 milimetre x 550 milimetre size superior type Belgium mirror with 16 milimetre diameter nickel plated towel rod complete.
Providing and fixing Orissa Pan of size 580x445x260 milimetre with approved make flush valve including trap, C.I. soil and vent pipe upto outside face of wall including 100 milimetre dia. C.I. plug, bend and necessary pipe connection, etc complete. As directed by Engineer in charge.
Supply and installation of cubicles of width and depth as perAthena Lite- SS Series Cubicles- Std Sizes (W x D x H): 900 mm x 1550 mm x 2105 mm, (Height is including 100 mm gap from bottom, Door Width- 600 mm specifications/ site drawings). Cubicle height to be 2105 mm. Made from solid grade compact high pressure laminate as per IS:2046 and EN-438 manufactured under high specific pressure > 5 MPa and temperature >120°C, All doors will be of single colour and made of 12 mm thick Merino HPL compact panel. The doors will have chamfered edges. Each door will be supported by 3 stainless steel made hinges affixed to the pilasters. Size of panels to be as per drawing. HARDWARE & ACCESSORIES are H shaped (Top) head frame structure made of extruded Aluminium grade 6063 T5-50 micron epoxy powder coated for surface protection, Size to be 125x70x5T. Corner joinery section, Size to be 40x16.5x1.8T. U-Channel Wall joinery section,Size to be 22x16x1.6T. Door stopper section, Size to be 21x12.5x1.6T. Spring loaded Butt Hinges made from Stainless steel grade 304. Surface finish to be matt type. Covers to be lacor coated.etc complete.As directed by Engineer in charge..
Providing and fixing white glazed urinal of series with Pressmatic auto closing valve of having 32 milimetre diameter P.V.C. flush pipe with fitting and flushing of approved make and arrangement including lead soil pipe, lead trap & soil pipe connection upto the outside face of wall etc.complete as directed by Engineer in charge.
Providing and fixing 75 milimetre diameter stabiliser pipe /Poly Venyl Chloride soil vent /waste pipe and with necessary fixtuers and fiting such as bends, tees, single junctions slotted vent, clamps complete.As directed by Engineer in charge..
Providing and fixing 100 milimetre diameter stabiliser pipe /Poly Venyl Chloride soil vent /waste pipe and with necessary fixtuers and fiting such as bends, tees, single junctions slotted vent, clamps complete.As directed by Engineer in charge..
ProvidingandlayingconcretepipesofI.S.NP.classof150mmdiameterinproperline,levelandslopeincludingnecessarycollars,excavation,laying,fixingwithcollarsincementmortar1:1andrefillingthetrench complete.
Providing and fixing heavy duty inter locking concrete Rubber mould glossy paving blocks of 80 milimetre thickness of having a strength of 400 kilogram per square centimetre of approved quality and shape on a bed of crushed sand of 25 to 30 milimetre thick including skirting joints and cleaning etc. complete using 100 percent crushed sand.As directed by Engineer in charge..
Providing and laying chequered tiles of approved quality of size 30 centimetre x 30 centimetre for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete.As directed by Engineer in charge..
Providing and applying a base coat comprising of 1 kilogram Polydee-MC and 1 kilogram fresh cement after wetting the surface followed by drying the surface for 2 days, apply primer coat of TP-40 and after drying, applying Polydee-11 two component (mixing ratio 2 A: 1 B) Antibactorial food grade coating inside drinking watertank in two coats with time interval of minimum 8 hours covering 7 years guarantee on Court Fee Stamp Paper of Rs.100/- etc complete.As directed by Engineer in charge..
Providing and fixing reinforced cement concrete Medium duty (140 kilogram) cover of size 60 centimeter x 45 centimeter with frame over inspection chamber complete.
Providing and fixing reinforced cement concrete Heavy duty (225 kilogram) cover of size 90 centimeter x 45 centimeter with frame over inspection chamber complete.
Providing detailed geological reports of proposed site by maintaining geotechnical investigation of structure stratification collecting soil, rock and ground water samples for laboratory tests to arrive the foundation design parameters . Rock properties such as type of rock, jointing fractures, etc. complete with suggestion about the site foundation and remedies.
Providing and constructing Ductile Iron circular manhole 45 cm dia. At top 90 cm at bottom up to 1.80 meter to 2.70 meter depth including excavation, laying 1:4:8 cement concrete bedding 15 cm thick burnt brick mansonry with 1:1 cement mortar plaster 25 mm thick inside and outside 20 mm (1:3) ductile iron heavy type cover with ring 125 kg in weight. High strength. More life and Durability, Good Antiskid Grip, Suitable to heavy theatric loading, Light weight casting after cost benefits for Transportation Refilling etc. as per requirement. with prior approval of concerned Superitending Engineer.
RWH - Shallow Percolation Pit providing, constructing 2.0m deep shallow depth percolation pit comprising of 1.0m dia pre-cast RCC rings, 300 milimetre thick side filling around outside of RCC rings (annular space) with 40 milimetre size boulders including filling of percolation pit up to 0.5m depth (from bottom up) with 25-75 milimetre clean washed gravels followed by 0.5m depth of 10-25 milimetre of clean washed stones followed by 0.5m of washed river fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) including netlon mesh between each gravel/fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) media layer including covering with RCC slab, manhole frame & cover, PVC rungs etc. including arrangement for inlet & outlet pipe, excavation & backfilling as shown in the drawing. The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge
RWH - Recharge Pit Providing and constructing recharge pit of 2.0m deep and 1.0m dia of pre-cast RCC rings with 6.5" dia x 25m deep borewell at the floor of recharge pit including installation of combination of solid/perforated PVC casing pipe wrapped around with netlon mesh including 300 milimetre thick sidefilling around outside of RCC rings (annular space) with 40 milimetre size boulders including filling of recharge pit up to 0.5m depth with 25-75 milimetre clean washed gravels from bottom up followed by 0.5m depth of 10-25 milimetre of clean washed stones followed by 0.5m of washed river fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) including netlon mesh between each gravel/fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) media layer including covering with RCC slab, manhole frame & cover, PVC rungs, PVC end-caps, fittings etc. including arrangement for inlet & outlet pipe excavation & backfilling as shown in the drawing.The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge.
Boring/drilling bore well of 300 milimetre dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machinery required for the job, all complete as per direction of Engineer in charge, upto 90m depth below ground level.
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well-casing pipe of 150 milimetre dia, conforming to IS:12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per the direction of Engineer in charge.
Supplying, filling, spreading & leveling stone boulders of size range 5cm to 20cm in recharge pit, in the required thickness, for all leads & lifts, all complete as per the direction of Engineer-in-charge.
providing and fitting 75mm thick dry wall with cement board on both sides and aerated concrete sandwich in between cement board with tongue and groove arrangement on site for interblocking of wall's.size of wallpanel 0.6 mts x 2.8 to 3.0 mts in height and thickness 75mm wall panel to be fitted and erected on site of any brand including transporatation. loading, unloading other taxes and fixing on site in bottom and top GI channel and finidhing surface ready for painting,including all lead, lift etc Excluding G.S.T.
Supplying, filling, spreading & leveling gravels of size range 5 milimetre to 10 milimetre , in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-incharge.
Supplying, filling, spreading & leveling coarse fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) of size range 1.5 milimetre to 2 milimetre in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer in charge.
Gravel packing in tubewell construction in accordance with IS:4097, including providing gravel: fine/ medium/ coarse, in required grading & sizes as per the actual requirement, all complete as per direction of Engineer in charge.
Providing and fixing of approved make white aquafree Waterless Urinal of with cartride size of 31.5x33x60cm including other necessary fittings etc. complete.
Providing and applying top coat exterior paint to terrace of approved make, shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by throughly cleaning of oil, grease, dirt and other material and fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) preparing as required,including all lead, lift etc. complete.
Providing and fixing Poly Venyl Chloride Rain Water pipes of 110 mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with Poly Venyl Chloride plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25 mm to 40 mm from face of wall a fixing with clips of approved quality and number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on cement concrete or masonry blocks, including necessary scaffolding and maintenance for 3 years for any leakages or dislocations of pipes. All the Poly Venyl Chloride fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete.
Providing and Fixing toilet set for differently Abled persons consist of Floor Mounted white vitreous china water Closet including 6 litre capacity white vitreous china flushing Cistern with raised soft-push button, white vitreous china wash basin of size 46 x 36 cm and one no SS 304 hinged rail 76 cms & three no SS 304of (Grab Bar) 60 cms all including cutting and making good the walls and floors wherever required ,seat cover, cistern & wash basin fittings,nuts, bolts and gasket etc complete of make Hindware(Matrix series 70002)/ Cera or equivalent as per the direction of Engineer-In-charge.
Providing and constructing Ductile Iron circular manhole 45 cm dia. At top 90 cm at bottom up to 1.80 meter to 2.70 meter depth including excavation, laying 1:4:8 cement concrete bedding 15 cm thick burnt brick mansonry with 1:1 cement mortar plaster 25 mm thick inside and outside 20 mm (1:3) ductile iron heavy type cover with ring 125 kg in weight. High strength. More life and Durability, Good Antiskid Grip, Suitable to heavy theatric loading, Light weight casting after cost benefits for Transportation Refilling etc. as per requirement. with prior approval of concerned Superitending Engineer.
Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 milimetre x 450 milimetre size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 milimetre thick supports with kadappah top 35 to 40 milimetre thick and polished granite 16 to 20 milimetre top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 centimetre height and top granite of 75 x 40 centimetre including cutting, opening for sink of required size in kadappah as well as granite complete.
Providing and applying white-wash in two coats on old/new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down,including all lead, lift etc complete.
Providing and fixing in position Unplasticised Poly Venyl Chloride ultra violet stabilized 110 milimetre outer diameter cowl dome confirming to Indian Standard - 4985 including making joints with solvent cement complete.
Providing and laying cement concrete pipe of Indian Standard 458:2003 non pressure-2 class of 450 milimetre diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 complete.
Providing and laying concrete pipe of Indian Standard Non Pressure class of 300 milimetre diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.
Providing and constructing Brick Masonry Inspection Chamber 90 cm x 45 cm x 90 cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channel shalf round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover heavy duty 140 Kilogram with frame etc complete.
Providing and constructing Brick Masonry Inspection Chamber 60 cm x 45 cm x 90 cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover heavy duty 140 Kilogram with frame etc complete.
Providing and fixing frame work of galvanised iron for suspended false ceiling which includes galvanised iron perimeter channels of size 27 millimeter and 0.5 millimeter thick having one flange of 20 millimeter and another flange of 30 millimeter along with perimeter of the ceiling, fixing in brick wall /partition with the help of rawal plugs and screws, suspending galvanised iron intermediate channels of size 45 millimeter and 0.9 millimeter thick with two flanges of 15 millimeter each from the soffit at 1200 millimeter centres with steel galvanised iron hanger of width 25 millimeter x 0.5 millimeter fasteners, ceiling sections of 0.5 millimeter thickness having curved wedge of 51.5 millimeter and two flanges of 26 milimetre each with lips of 10.5 millimeter fixed to the intermediate channels with the help of connecting clips and in direction perpendicular to the intermediate channel at 450 millimeter centres. 12.5 millimeter dry wall screws at 230 millimeter centres, fixing screws mechanically either with screw driver or drilling machine with suitable attachment etc. complete.
Providing and fixing 900 milimetre high S.S. 304 Grade Stainless steel railing with 40 milimetre diameter and 1.5 milimetre thick at top, 40 milimetre diameter and 1.5 milimetre thick vertical supports spaced at 1.5 m center to center and 8 milimetre thick toughened glass including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe complete.
Providing and fixing Granite plate of required size engraving 10cm. Height letter, figures including painting the lefters/figures with approved colour and shade complete
Supply and installation of tested Vetrotech Saint-Gobain VDSTM fully glazed fire rated unlatched double leaf door system with 120 minutes of integrity (NBC 2016 Part 4 Clause 3.4.5.2), radiation control (EW 120) and partial insulation (EI 20) (NBC 2016 Part 4 Clause number 2.22 Note 2) with symmetrical (Bi-Directional) fire protection. The frames shall be imported cold rolled Forster profiles from Switzerland using DX52D+Z275-M-A-O steel sheets (As per EN standard EN 10327). The door frames are cold rolled from 1.5 mm steel sheet to form a profile of 50 mm x 50 mm on all sides. The door shutter would have the top rail, side rail and bottom rail dimensions of 50 mm x 50 mm. The overall door opening shall be as per tested evidence and tested as per EN 1634-1 in an accredited international laboratory. The glass should be Contraflam Lite 14mm clear 120 min fire rated for Integrity, Radiation control (EW 120) and partially insulation (EI 20) Non Wired Toughened Interlayered glass with a light transmission of 86% and a sound reduction of 38 dB and manufactured in UL & TUV audited Facility and including UL-EU Certification and compliant to class 1(B)1 category of Impact Resistance as per EN 12600. The glass shall provide bi-directional (Symmetrical) fire protection. The glass shall also be tested for 5000 hours of UV resistance. The shutters should be fixed to the frame using Forster Weld-on hinges of dimensions 179mm X 20mm. The profiles shall have groves to incorporate Fire Resistant gaskets. The doors shall incorporate drop down seal at the bottom. The glass should be held in its place with the help of 1.5 mm cold rolled steel beading and Kerafix 2000 ceramic tape with cross section of 4 x 15 mm as per the test evidence. Beading shall be clipped on using Stainless Steel self-tapping screws fixed at a distance of 70 mm from the edges and 150 mm c/c henceforth. The glass panes are to be supported on non-combustible 6 mm Calcium Silicate setting blocks. The door should be fitted with offset pull handle and door closer of Dorma (TS 73V, TS 83V, TS93V), Geze (TS 2000NV) or equivalent. The inactive leaf should be fixed to the frame using a tower bolt at meeting edge at top or as per the tested evidence. The doors shall be manufactured in a TUV audited facility. The doors shall offer C4 level of wind resistance when tested as per EN12211 and shall provide class 4 level of air permeability as per EN 1026. The door shall also be subjected to durability tests as per EN 12400 for C5 classification (200,000 cycles). The doors shall also be tested for class 5 of impact resistance when tested as per EN 13049. The doors shall also be tested for class 4 level of Mechanical strength when tested as per EN13115. The doors shall have water tightness level of 8A when tested as per EN 1027.
Providing & Fixing in position UPVC two track two shutter slidding window with sound proof DGU 20mm thick glass & UPVC fixed central portion having multi chambered outer frame(62X52)mm with an outer wall thickness of 02mm & steel Reinforcement multi chambered sliders sash(42X68)mm with steel reinforcement desiged to give optimum strength soundproof DGU 20mm thick toughned glass with two track two pannel system,12mm spacer of good quality including aluminium track ,inter locking profile,coaxtruded bading EPDM gaskets,silicon sealant, sliding handle, fixtures & fastening(couplings, hinges) including with all required screw & nut with all necessary UPVC sections as per detailed drawings & As directed by engineer incharge etc.complete.
S.S.SATHE
Spectrum Infrastructure
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid