Completation of Casuality Block in CHC Surankote by way of Providing and Fixing of Saintary Fittings,Plumbing etc and other allied Work.

Amount

Brick work with common burnt clay F.P S ( non modualar) bricks in super structure above plinth level lupto floor V level.of class designation 75 cement mortar 1:6 (1 cement :6 coarse sand) including carriages.

Half brick masonary with bricks of class designation 75 in foundations and plinth in : Cement mortar 1:3 ( 1 cement: 3 Coarse sand) in super structure above plinth level lupto floor V level.including carriages.

Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand:10 graded brick aggregate 40 mm nominal size) inretaining wall/return wall,columns etc. excluding cost of centering and shuttering all work upto floor V level .including carriages.

15 mm thick cement plaster on the rough side of single or half brick wall of mix 1:6 ( 1 cement :6 Coarse sand ) . including carriages.

Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate ) finished with a floating coast of neat cement including cement slurry but excluding the cost of nosing of steps etc complete 40 mm thick with 20 mm nominal size stone aggregate crushed including carriages.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering .All work up to plinth level with : 1:4:8 with ( 1 cement : 4 coarse sand :8 graded stone aggregate 20 mm nominal size).(around the Pipe)

Providing and fixing white vitreous china pedestal type water closet (European type W.C.pan) with seat and lid.10litre low level white P.V.C.flushing cistern including flush pipe with manually controlled device (hand lever) conforming to IS:7231,with all fittings and fixtures, complete,including cutting and making good the walls and floors wherever required.

W.C.pan with ISI marked white solid plastic seat and lid. make CERA, CAT No. S1050101

Proving and fixing urinal CERA CAT NO.S40201121 size 315x265x440mm Capriana

Providing and fixing urinal division plate 20 mm thick granite of approved shade & colour.

Providing and fixing wash basin with C.I/M.S.brackets,15mm C.P.brass pillar taps,32mm C.P.brass waste of standard pattern,including paintaing of fittings and brackets,cutting and making good the walls wherever required:

Round wash basin under Counter type Make CERA CAT No. S2030112 size 570 x 750mm

Providing and fixing P.V.C.waste pipe for sink or wash basin including P.V.C. waste fittings complete:

Flexible pipe pipe 40mm dia

Providing and fixing 100mm sand cast iron grating for gully,floor or Nahani trap.ISI Marked

Providing and fixing mosquito proof waste coupling 40mmx100mm of approved municipal design. Make JAQUAR CAT No. ALD 709 ISI Mkd. (6 inch)

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing.

Oval Shape 450x350mm (Outer Dimensions)

Providing and fixing 600x120x5mm glass shelf with edges round of suspported on anodised aluminium angle frame with C.P.brass brackets and guard rail complete fixed with 40mm long screws,rawl plug,etc.complete.Make HEXA

Providing and fixing toilet paper holder. Make JAQUAR CAT No. AEC1141

Providing and fixing Soil, waste and vent pipes of approved quality LIKE VECTUS or PRINCE, ISI marked, unbreakable (4 Kg. pressure).

110mm dia

75mm dia

150 mm dia

Providing and fixing PVC clamps of approved design to PVC pipes:

of 110mm dia Pipe

of 75mm dia Pipe

Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete:

110mm dia PVC Door Bend of Make vectus or prince

75mm dia PVC Door Bend of Make Vectus or prince

Providing and fixing plain bend of required degree:

110mm dia PVC Plain Bend of make Vectus or prince

75mm dia PVC Plain Bend of Make Vectus or prince

Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete.

110x110x110mm dia PVC Door Tee of Vectus or prince

75x75x75mm dia PVC Door Tee of Vectus or Prince

Providing and fixing single equal plain junction of required degree

110x110x110mm dia PVC Plain Tee of Vectus or Prince

75x75x75mm dia PVC Plain Tee of Vectus or Prince

Providing and fixing single unequal junction of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete:

110x110x75mm dia PVC Reducer Door Bend of Vectus or Prince

Providing and fixing single unequal plain junction of required degree

110x110x75mm dia PVC Reducer Plain Tee of Vectus or Prince

Providing and fixing following PVC Fittings of approved quality as vectus or prince:

PVC Y/TEE of 110 mm dia.

FLOOR TRAP 110 mm dia.

VENT COWL 110 mm dia.

END CAP 110 MM dia

REDUCER 110MM x 75 mm dia.

P TRAP 110 mm dia.

FLOOR TRAP 75 mm dia

PVC Plain Bend 45 degree 110 dia of make vectus or prince

PVC Collar 110mm Vectus or prince

PVC Collar 75mm Vectus or prince

Providing and fixing trap of self-cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors:

CP Greeting ISI Market

Cutting chases in brick masonry walls for following diameter PVC pipes and making good the same with cement concrete 1:3:6 (1cement: 3coarse sand: 6 graded stone aggregate 12.5mm nominal size) including necessary plaster and pointing in cement mortar 1:4 (1cement: 4coarse sand) :

110 mm dia

75mm dia

Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and color, weighing not less than 105gms. JAGUAR CAT No. AEC 1135N

Providing and fixing PTMT towel ring trapezoidalshape 215mm long, 200mm wide, with a minimum distance of 37mm from wall face with concealed fittings arrangements of approved quality and color, weighing not less than 88gms JAQUAR CAT NO. AEC 1121

Earth work excavation, refilling laying & filling with 1:3:6 Mix (Cement/Sand/Agg, 20mm) all around the pipes Incl. material (excluding cost of pipe).

150mm dia Pipes

110mm dia Pipes

Providing and fixing polyethelene-Aluminium-Polyethelene (PE-AL-PE) composite pressure pipes conforming to IS: 15450 U.V. stabilised with carbon black having thermal stablity for hot and cold water supply,capable to withstand temperature upto 80 degree including all special fitting of composite material (engineering plastic blend and brass inserts wherever required) e.g. Elbows,tees,reducers,couplers and connectors etc.with joiunts complete as per direction of the Engineer-in-charge.(Interna; work-exposed on wall).Make prince PN 20 ISI Marked

2025(25mm OD) Pipe

2532(32mm OD) Pipe

3240(40mm OD) Pipe

4050(50mm OD) Pipe

Making connection of PPR Prince PN 20 distribution branch with PPR main of following sizes by providing and fixing Tee, incl. cutting and Threading the pipe etc complete

25 to 40mm nominal bore

Fixing stop cock in PPR pipe line incl. cutting the pipe and making long screws etc

Providing & Fixing Tank Nipple

Providing and fixing FEMALE THREAD JOINT 50mm x1 1/2"

Provding and fixing MALE THREAD JOINT 40mm x 1 1/4".

Providing and fixing G.I REDUCER 1"x1 1/4"

Providing and fixing SOLUTION (ADHESIVE)

Providing and fixing CP brass long nose bib cock of approved quality conforming to IS standards and wrighing not less than 810 gms

15mm nominal bore JAQUAR Make CAT No. CQT23037

Providing and fixing CP Brass angle valve fo basin mixer and geyser points of approved make conforming to IS:8931

15mm nominal bore JAQUAR CAT No.CQT 23053

Providing and fixing CP Brass close hole basin mixer with pillar cock of approved make conforming to IS:8931

15mm nominal bore BASIN MIXER of JAGUAR CAT No.CQT 23167 NB

Pillar Cock of Jaquar CAT No. CQT 23011

Providing and fixing gun metal gate valve with CI Wheel of approved quality (screwed end)

25mm nominal bore

40mm nominal bore

Providing and fixing gun metal non return valve of approved quality (screwed end)

25mm nominal bore

40mm nominal bore

Providing and fixing unplasticised PVC connection pipe with brass unions

15mm nominal bore

Providing and fixing CP brass shower rose with 15 or 20mm inlet

100 mm dia shower of JAQUAR CAT No.EOS 542A

Constructing masonry chamber 30x30x50 cm, inside with 75 glass designation brick work in cement mortar 1:5 (1cement: 5 fine sand) for stop cock,with C.I. surface box 100x100x75mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) necessary excavation, foundation concrete 1:5:10 (1cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1cement: 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design.(with F.P.S bricks) CRUSHED

Constructing masonry chamber 60x60x60 cm, inside with 75 glass designation brick work in cement mortar 1:5 (1cement: 5 fine sand) for Sluice valve, with C.I. surface box 100mm top diameter, 160mm bottom diameter and 180mm deep (inside) with chained lid and R.C.C. top slab 1:2:4 mix (1cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) necessary excavation, foundation concrete 1:5:10 (1cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1cement: 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design.(with F.P.S bricks) CRUSHED

Providing and fixing PPR union in PPR pipe incl. cutting and threading the pipe and making long screws etc complete [NEW WORK]

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI:12701 marked indicating the BIS License No. with cover and suitable locking arrangement and make necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank {Sintex, Vectus or equivalent}

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4, C.I. cover with frame (light duty) 455x610mm internal dimensions, total weight of cover with frame not less than 38kgs, R.C.C. top slab with 1:2:4 mix, foundation concrete 1:5:10, inside plastering 12mm thick with cement mortar 1:3, finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design

Inside dimension 455x610mm and 40 cm deep for single pipe line with common burnt clay bricks

Making soak pit 2.5 diameter 3.0m deep with 45x45cm dry brick honey comb shelf with bricks and SW drains pipe 100mm dia. 1.8m long complete as per structural design.

with common burnt clay FPS bricks

Providing installation and testing of Geyser of approved quality and manufacture mounted on bolts, well anchored in wall and connected with hot and cold G.I. connection with superior angle valves as required.

40 Ltrs JAQUAR Model/ CAT No. Versa H 40 [Horizontal] {5 STAR RATING}

Providing & fixing SINK MIXER of JAQUAR CAT NO. :CQT 23309

Providing & fixing Soap Case of Jaquar Cat No. AEC1131

Providing & fixing CP Cup of approved Quality

Providing & Fixing CP Nipple of CERA Cat NO. F8070301 (25mm)

Providing & Fixing PVC Cistern of Jaquar CAT NO. WHT184

Providing & Fixing Jet Connection Of Jaquar CAT NO. ALE 547

Providing & Fixing Water Pump 1.5 Hp of Crompton Greaves /Sharp

Spout F/T JAQUAR FLR 5447

Angle value F/T JAQUAR FRL5053N

Bib cock F/T JAQUAR FLR 5047N

Besin Mixer JAQUAR FLR 5001B

Expose Kit JAQUAR FLR 5079 K

Health Faucet JAQUAR ALD 5041 N (ALD 573)

Two way Bib Cock JAQUAR FLR 5041 N

Towel rod JAQUAR CAN 1111 NM

Tumbler Holder JAQUAR ACN 1141 N

Glass Shelf JAQUAR ACN 1171 N

Rack Bolt JAQUAR B204010

Two piece wall hung JAQUAR 510311 P

Sink cock JAQUAR 23347 CQT

Shower JAQUAR 1989 OHS

Arm JAQUAR 477P SHA

Providing and fixing water closet squatting pan(Indian type W.C.pan) with 100mm sand cast iron P or S trap, 10 litre low level P.V.C. flushing cisten including flush pipe ( of approved make) manually controlled device (hand lever) conforming to IS:7231,with all fittings and fixtures complete,including cutting and making good the walls and floors wherever required.

Orrisa Pattern white vitreous china W.C. pan of size 580x440mm make CERA, CAT No. S3020102

Providing and fixing P.V.C.waste pipe for sink or wash basin including P.V.C. waste fittings complete:

Semi rigid pipe 40mm dia

Flexible pipe pipe 40mm dia

Providing and fixing mosquito proof waste coupling 40mmx100mm of approved municipal design. Make JAQUAR CAT No. ALD 709 ISI Mkd. (6 inch)

Providing and fixing following PVC Fittings of approved quality as vectus or prince:

END CAP 110 MM dia

Providing and fixing PTMT bottle trap for wash basin and sink: Bottle trap 31mm single piece moulded with height of 270mm, effective length of tall pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 260gms. JAQUAR CAT No. ALE 773AL190

Providing installation and testing of Geyser of approved quality and manufacture mounted on bolts, well anchored in wall and connected with hot and cold G.I. connection with superior angle valves as required.

60 Ltrs JAQUAR Model/ CAT No. Versa H 60 [Horizontal] {5 STAR RATING}

Providing & Fixing PVC Long Bend Of Approved Quality

Fe.th Elbow 25x1/2''

By Pass Bend 25mm

Fe. th Joint 25x1/2''

PVC Pipe 300mm

PVC Pipe 200mm

PVC Plain Bend 300mm

PVC Plain Bend 200mm

PVC Plain Bend 150mm

Door Tee 150mm

PVC Collar 300mm

PVC Collar 200mm

PVC Collar 150mm

PVC Plain Tee 300mm

PVC Plain Tee 200mm

PVC Plain Tee 150mm

Urinal Censor CICICY S4010102

Urinal Censor CICICY S4010102

Basin Mixer (Medi Series) CQT CHR-23267

Seat Cover (Cera) B15101215N

PVC Clump 110mm

PVC Clump 75mm

One PES EWE Chissel (Cera) S1013195n

Wash Basin Cruse Basi S2040111sn

Wash Basin Cruse Padestal S20901075N

Sensor Top SNR-CHR-35019PM

C.P.Nipple 1 1/2''x1 1/2''

C.P.Nipple 1/2''x2''

C.P.Nipple

Earth work to PVC pipe 300mm dia pipe 1 mtr in depth

Earth work to PVC pipe 200mm dia pipe 1 mtr in depth

Chamber 2'x1'.6'' deep 1.5 mtr

Chamber 2'x1'.6'' deep 1.0 mtr

Chamber 2'x1'.6'' deep 60 cm

PEERZADA SAYED NISAR HUSSAIN SHAH

MS BHAT ROAD AND ROOF BUILDERS

ZULAFKAR AHMED

M/S AYOUB SHEIKH

SHOKAT MEHMOOD

M/S RAZAK HUSSAN MANHAS

MOHD SHABIR

MS ZULFKAR HUSSAIN SHAH

PARMEET SINGH

M/S AYAZ KHAN

Mohd Mashooq

GHULAM NABI MIR

Asif Iqbal

Javid Iqbal

M/S GURNAM SINGH

Abhinav Sudan

Saahil Mir

MOHD RASHID MIR