Improvement estimate for Central Store, Namakkal office building by providing new shed for Security room and Providing Water pipelines and Electrical works etc., at Namakkal EDC.

PCC 1:4:8 using 40mm HB stone for Plinth production in the following levels as instructed by the Engineer in charge including cost of all materials, labour, lead lift, T&P, etc., complete.

Providing PCC 1:2:4, using 6mm HBG stone chips to average thickness of 5cm and plastering with C.M 1:5 12mm thick including cost of all materials, lead, lift, curing and T&Ps etc complete and as directed by the Engineer incharge of the work.

Supplying and fixing in position of 32mm dia PVC pipes with ISI monogram with necessary clamps and adhesive solution, etc., including cost of materials,labour, excavation, refilling, lead, lift, T&Ps etc. Complete and as directed by the Engineer incharge of the work.

Supplying and fixing in position of 25mm dia PVC pipes with ISI monogram with necessary clamps and adhesive solution, etc., including cost of materials,labour, lead, lift, T&Ps etc. Complete and as directed by the Engineer incharge of the work.

Providing and fixing up of 25mm dia Gun metal wheel valve including fixing charges, materials, lead, lift, T&Ps etc., complete and as directed by the Engineer incharge.

Providing and fixing up of 32mm dia Gun metal wheel valve including fixing charges materials, lead, lift, T&Ps etc., complete and as directed by the Engineer incharge.

Design,fabrication,supplying and erection of shed at infront of newly formed section office using PPGI sheetof 0.50 mm thick powder coated roll forming profile with designed sheets for roof lean to roof with necessary channels made up of structural steel for vertical and horizontal supports and painting with 2 coats of enamel paint, necessary foundation for structual columns and finishing line with adjacent flooring area,including cost of material, labour lead,lift etc complete.

Wiring with 2x1.5sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade insuitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5AFT switch with painting of suitable colour for open PVC light point (for electronic regulator) (6 points per coil)

Wiring with 2x1.5sqmm PVC insulated SC unsheathed FRLS Copper Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 113mm TW switch box in flush with wall with 3 mm thick Hylem sheet cover for 5 A 3 pin non inter locking wall socket with 5A flush type switch with painting suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for open PVC plug point.

Dismantling the central store existing gate size of (4.50 M x 1.50 M) devaluated the materials to store including cost of all materials lead and lift etc., complete and directed by Engineer at site.