Loading
Loading…
Loading…
Tender Value
Refer Docs
Closing Date
27 Aug 2026, 11:00 am3d left
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
CONSIGNEE
Not Applicable
60 days
Expenditure
General
83
3 conditions
I/We engage to supply the Western Railway with the articles specified above upon the terms of the Indian Railway Standard Condition of Contract latest revision and upon the terms of the Revised Special Conditions and Instructions for the guidance of the Contractors issued by the Western Railway S/137/F Revised May 2011 - Amendment No.3 of June 2016.
Railways reserves the rights to place order for entire / bulk quantity on firms who have successfully supplied same/similar items to any Railway/ PUs for which documentary evidence must be furnished along with their offer evidencing execution of such the purchase orders
Firm should submit authorization certificate from OEM.
21 conditions
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Earnest Money Deposit (EMD): (1) EMD shall be submitted by tenderer as specified in tender schedule, along with their online offer. There shall be no exemption from submission of EMD for any tender or by any tenderer except those exempted. (2) Exemption to submit EMD will be given in the following cases : (a) Micro and Small Enterprises (MSEs) against UDYAM certification. (b) Other Railways and Government Departments. (c) Vendors registered with Railways for the trade group of the item tendered.
SECURITY DEPOSIT (SD): 1. All successful tenderer shall deposit Security Deposit (SD) amount @5% of contract value rounded off to nearest higher Rs.10,subject to maximum Rs. 50 lakh for contract value upto Rs 50 Cr. In case of contract value above Rs 50 Cr. SDwill be Rs 1 Cr.2.There shall be no exemption from submission of Security Deposit (SD) for any tender or by any tenderer except following:i. The Contract value up to Rs.25(twenty-five) lakh.ii. Other Railways and Government Departments.iii. PSUs owned by Ministry of Railways and PSUs for the group of items that are manufactured by them.iv. In tenders issued against PAC,OEM in whose favour PAC has been issued.v.Vendors registered with Railways for the trade group of the item tendered for orders valued up to their monetary limit of registration.vi. Vendors appearing on theapproved vendor lists of RDSO/PUs/CORE, subject to approval status being valid on the date of tender closing.
4 locations across Madhya Pradesh · 20 Set · 10 Numbers total
25 KV EARTHING/DISCHARGE ROD ASSEMBLY, 33kv electric shock proof hand gloves,
83265717~WR
83265717
Open - Indigenous
Goods
Ujjain, Madhya Pradesh
₹0
Exempted
4 Aug 2026
4 Aug 2026
5 items · 20 Set · 10 Numbers total
33kv electric shock proof hand gloves for working on high voltage electrical fittings made fro m specially compounded latex for complete insulation, 100% shock proof, smooth finishing inside and outsi de of gloves ,Cuff Length 6-10 Inches, Finger Type Full Fingered, glove size- Large and Medium in equal qua ntity. the product shall be manufactured as per IS 4770/1991 or latest. test potential 33000 volts and worki ng potential 26500 volts to be supplied with manufacturer test certificate (one SET consists of 2 nos. of glo ves for wearing on left and right hand) make/brand- commander, Vidyut, KAWACH, Crystal, Raychem, Kara m or Similar. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| JR. ELECTRICAL ENGINEER GRADE I (POWER) UJJAIN, WR | Madhya Pradesh | 10.00 Set |
| Total | 10 Set | |
Digital Multifunction (Installation) Tester having function of Fault loop impedance measureme nt with RCD Non-trip feature, prospective earth fault and short circuit current measurement, voltage measu rement range of 500 V, Insulation resistance measurement (test voltage range from 100V to 1000V). Conti nuity and line resistance measurement, Earth resistance measurement using 2-pole & 3-pole with accessori es, RCD testing for Type AC, A, B and programmable RCD, Bluetooth connectivity, internal memory for test data storage with rechargeable battery. Accepted Make- Fluke, Metravi, Motwani or Similar. [ Warranty Pe riod: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| JR. ELECTRICAL ENGINEER GRADE I (POWER) UJJAIN, WR | Madhya Pradesh | 2.00 Numbers |
| Total | 2 Numbers | |
25 KV EARTHING/DISCHARGE ROD ASSEMBLY FOR HIGH RISE OHE WITH WORKING VOLTAGE 25 KV AC TRACTION IN 4 EQUAL SECTIONS (OVERALL LENGTH SHOULD NOT BE LESS THAN 6.7 METER) OF FIBRE GLASS STICK WITH SINGLE CORE FLEXIBLE MULTISTRAND ANNEALED COPPER CABLE OF SIZE 248/0.4 5 MM & 13 METER (11.5+1.5)MTR LONG, EACH DISCHARGE ROD SUPPLIED WITH 2 NOS. RAIL CLAMPS & TO P CLAMP SUITABLE FOR 10-20 MM DIA. CONDUCTOR AND WHOLE ASSEMBLY TO BE SUPPLIED IN CANVAS B AG AND ALL SHALL BE AS PER RDSO SPEC. No. ETI/OHE/51 (9/87) WITH LATEST A&C SLIP No. 1 (10/92 [ Wa rranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SR. SECTION ENGINEER (ELECTRICAL POWER) RATLAM, WR | Madhya Pradesh | 4.00 Numbers |
| Total | 4 Numbers | |
25 KV EARTHING/DISCHARGE ROD ASSEMBLY FOR HIGH RISE OHE WITH WORKING VOLTAGE 25 KV AC TRACTION IN 4 EQUAL SECTIONS (OVERALL LENGTH SHOULD NOT BE LESS THAN 6.7 METER) OF FIBRE GLASS STICK WITH SINGLE CORE FLEXIBLE MULTISTRAND ANNEALED COPPER CABLE OF SIZE 248/0.4 5 MM & 13 METER (11.5+1.5)MTR LONG, EACH DISCHARGE ROD SUPPLIED WITH 2 NOS. RAIL CLAMPS & TO P CLAMP SUITABLE FOR 10-20 MM DIA. CONDUCTOR AND WHOLE ASSEMBLY TO BE SUPPLIED IN CANVAS B AG AND ALL SHALL BE AS PER RDSO SPEC. No. ETI/OHE/51 (9/87) WITH LATEST A&C SLIP No. 1 (10/92 [ Wa rranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| JR. ELECTRICAL ENGINEER GRADE I (POWER) UJJAIN, WR | Madhya Pradesh | 4.00 Numbers |
| Total | 4 Numbers | |
33kv electric shock proof hand gloves for working on high voltage electrical fittings made fro m specially compounded latex for complete insulation, 100% shock proof, smooth finishing inside and outsi de of gloves ,Cuff Length 6-10 Inches, Finger Type Full Fingered, glove size- Large and Medium in equal qua ntity. the product shall be manufactured as per IS 4770/1991 or latest. test potential 33000 volts and worki ng potential 26500 volts to be supplied with manufacturer test certificate (one SET consists of 2 nos. of glo ves for wearing on left and right hand) make/brand- commander, Vidyut, KAWACH, Crystal, Raychem, Kara m or Similar. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SR. SECTION ENGINEER (ELECTRICAL POWER) RATLAM, WR | Madhya Pradesh | 10.00 Set |
| Total | 10 Set | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].