Construction of Swimming pool (Olympic size 50 mtr X 25 mtr X 6 feet) at Regional College of Physical Education (RCPE), Panisager, North Tripura .

Amount

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge

ALL KIND OF SOIL

Supplying and filling in plinth with sand/pebbles under floors, including watering, rammii=ng, consolidating and dressing complete

Concrete Work

Providng and lying in position cement concrete of spefified grade excluding the cost of contering anf shuttering - All work up to plinth level:

1:2:4( 1 cement: 2 coarse sand ( zone - III ) : 4 graded stone aggregate 20 mm nominal size.).

1:4:8 ( 1 cement: 4 coarse sand ( zone - III ) : 8 graded stone aggregate 40 mm nominal size.).

Steel reinforcement for R.C.C work including aightening, cutting bending , placing in sition and binding all complete upto plinth level.

Thermo- Mechanically Treated bars of grade Fe-

CLASSIC COMPETITION SWIMMING POOL PANEL.

Stainless steel structure complete with base lodularr panels, classic type overflow gutter and puchedbuttersses. Rear side of panels and gutter protected by a transparent sheet . All other parts manufactured in AISI 470 stainless steel, more resisteant to corrosion than AISI 1316l . Size 1.4 m x 1.00 m

Modular STRUCTURE HEAD WALLS

Headwall construction, the modular pane; is 300 mm higher than the water level , to host competition touch pads accoring to FINA norms Designed for fixing to concrete pool deck constrction (excluding from supply) upper frame 100mm wide , in stainless steel link plate described in dedicated position. to be completed by a cocrete deck step ( excluded from supply) built by third finishing on horizontl plate not included

GUTTER DRAIN

The gutter grid is sloping 5 and creates with the PVC coping an hand - grid complying with EN norms

RECESSED STEP STAIR

Stainless steel structure complete with base frame, modular panes , classic type overflow gutter and punched buttersses . Rar side of panes and gutter protected by a transparent plastic sheet . Complete with recessed foot rest in short sied size : 1.2m x 1.00 m

GRAB RAIL RECESSED STEP STAIR

PAIR OF GRAB RAILS FOR RECESSED FOOT LADDER . ANCHORS IN THE MODULAR GUTTER.

PVC MEMBRANE

PVC MEMBRANE with polyster mesh obtained by calendaring two PVC membrance at hot temperature. The face towards water has a special chlorine resistant formulation and recieves a transparent acry paint for extra protaction.

THICKNES :1.5MM

HOTWELDING AND SEALING

Providing lying and sealing the memrance supplied in rolls 205cm wide on the construction site by hot temperature weldin gfilling and finsiishing with liquid PVC on joints and smoothing each welding

Mosaic target

FINA size obtained with glass mosaic , 20 x 20 mm x 2mm thick , gluing , filling and installation complete in al respect.

Mosaic line width : 250mm

BLACK LANE MARKING IN PAINT

Providing and making black paint stripes on the floor PVC using liquied PVC with tetrahdrofurane, ethyl acetate etc.

Size according to FINA norms.

" TWIN TYPE " OVERFLOW GUTTER DRAIN

Set of two vertical overflow gutter drains for discharge water into return piping network of filtration system. Includes two solid PVC sockets fpr 90mm dia. Pipe connection.

Providng , lying and joint welding of UPVC (class 6 kg/ sqm) heavy duty with ittings like reducers , bends, T-joints etc. as per the direction of Engineer - incharges (Finolex /Astra/Prince). The rate should include required labour , tools and tackles etc , complete

Filtration Equipments

FILTERS

Supplying, Installation, Testing and Commissioning of TOTALLY ANTI-CORROSIVE Bobbin Wound filter 2000 mm diameter, fitted with pressure gauge, panel manual air bleeder, water drain and emptying plug, fitted with collector arms and diffuser made from unplasticized PVC and polypropelene, filtration velocity 140m³/hr/m². Max.EN ISO 9001 :2000 Standard.(2W+1S) working pressure : 2.5 kg/cm². Flow rate = 125m³/hr outlet 140 mm Height :2040mm : filtration area : 3.14 m 2, Make : Aqua pac, abyss

Valve Battery Manifold made in PVC with flanges for connecting to filters as per DIN 2501 standards. Consist of set of 5 - buttterfly valves for carrying out filtration, back-washing, rinsing and shut down of the filters .etc., complete . Size : 140mm.

Valve battery supports

Valve battery supports of suitable Height made of Zinc Plated Steel height : 2.30m easy assembly valce manifold brackets from 63 mm dia -225 mm dia for all types filters Make : Aqua pac, abyss

Re- circulating pump

Cast iron pumps 3000 r.p.m Mechanical sleal in stainnless steal I.P - 54 motor protection stainnless steal AISI-420 SHAFT Make : Aqua pac, abyss

Chemical dosing system

Dosing pump

Membrance Dosing pump "EXACTUS" model

Electronic dosing pump to be mounted both on its base as well as hung on the wall. Pumps following CE regulations, IP- 65 protection. Power connections : 220/240V, 50/60 Hz. The materials in contacts with liquied are polypropylene viton , teflon and pvc includes anti acid plastic case flow 201/ hr @ 5 bar Make : Aqua pac, abyss

Chemical storage tank

Semi transparent polythelene tank with external scale so that levels can be checked easily capicity of tank 500ltr. Make : Aqua pac, abyss

Agitators

Agitators for easy installation in the tanks, provided with steering grip in bakelite, rod and propellor arms in PVC length of stirring rod 900mm complete etc as required Make : Aqua pac, abyss

Floor Inlets

White ABS plastic bottm inlet for concrete with S.S screws and regulable flow. Max flow rate : 12 m 3 / hr complies with en 13451-1.

Make : Aqua pac, abyss

Pools drain

Main drain. Body and grille in white ABS grille fixed with scres.maximum flow 13m 3 / hr.

Make : Aqua pac, abyss

Contol and Regulatory Valve

All valves shall be in uPVC with PN- 10 rating and EPDM SEAT. complete etc as required(Contol and Regulatory Valve)

Competition Equipment

Starting block

Supplying and Installation of Starting block in plain PVC board Fiberglass top 740 x 520 mm with track start (5 positions) as per FINA norms. Fixing with 6 bolts.

Make : Anti, Aquapac, Astral

Float inlets

Supply ANTI wave racing lane of 50n MAXI MODEL consisting of 50m ss cable , ss hook , super tensioner and antiwave float as FINA standard and colour. Instead of abyss or equivalent plastic float of approval colour and polyster line . All complete as per site condition

Make : Anti, Aquapac, Astral

Floating rope anchors

Floating rope anchors on two plain PVC board glued on both sides of the gutter channel, polished stainless steel anchor bolted on the two PVC board, extension of the floating line with 'hammer head' terminal to enter the slot as per FINA standard.

Supplying Float Line Roller made in SS- 316. It is mounted over rotating wheels for maximum mobility and transport. Width 1.8m as per FINA standard.

Float line tensioner. In AISI 316. Chrome plated

Providing and instalation of back stroke indicator made of stainless steel 304, 43mm dia pipe of height 1.8 m consisting of 2 nos post, 1 polyster chord and foats for 25 m width including supprot anchor for attachment on the deck area for completion Make : Anti, Aquapac, Astral

Providing and instalation of false start indicator made of stainless steel 304, 43mm dia pipe of height 1.8 m consisting of 2 nos post, 1 polyster chord and foats for 25 m width including supprot anchor for attachment on the area for completion Make : Anti, Aquapac, Astral

Techno Sports Infra Pvt Ltd

Decor India