Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.3 LAccepted-AOC PLOT NO RZ B 1 59 KH NO 534 535 BLOCK B 1 NEW ROHANPURA PP NO 1416 NAJAFGARH NEW DELHI 110043 | NEW DELHI | NAJAFGARH | DELHI | 110043 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹59.8 L+₹15.6 L (35.2%)Rejected-Finance 00 KANDHARPUR NEAR JUNIOR HIGH SCHOOL KANDHARPUR BAREILLY UTTAR PRADESH 243004 UDYAM UP 15 0021222 | BAREILLY | UTTAR PRADESH | 243004 | L2 | Rejected-Finance Not Lowest Tender | |
| 3 | L3₹77.3 L+₹33.1 L (74.7%)Rejected-Finance | L3 | Rejected-Finance Not Lowest Tender | |
| 4 | L4₹80.0 L+₹35.7 L (80.7%)Rejected-Finance | L4 | Rejected-Finance Not Lowest Tender | |
| 5 | L5₹84.7 L+₹40.5 L (91.4%)Rejected-Finance HARINAGAR BEHIND MAHESHWARY MARKET PO TATISILWAI DIST RANCHI PIN 835103 | RANCHI | JHARKHAND | 835103 | L5 | Rejected-Finance Not Lowest Tender |
Tender Value
₹49.9 L
EMD Value
₹99,000
Closing Date
17 Sept 2022, 6:00 pmClosed
GE South Delhi Cantt 110010
Garrison Engineer South Delhi Cantt 110010
REPAIR/MAINT OF WOODEN FURNITURE FOR JCOs/ORs MARRIED ACCN/OTM UNDER GE (SOUTH) DELHI CANTT-10
2022_MES_537224_2
GE/DS-49/2022-23
Open Tender
Civil Works
Item Rate
270 days
GE South Delhi Cantt
Please refer Tender documents.
11 documents required · 11 mandatory
₹500
GE South Delhi Cantt
₹99,000
Yes
10 Oct 2022
27 Aug 2022
19 Sept 2022
27 Aug 2022
17 Sept 2022
3 Sept 2022
Amount
A) Removal of following existing unserviceable wooden components of various MES F/DB/FD/MAP furniture items or similar items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing,providing hinges, placing everypart in-tact the disturbed portion, as applicable as per drgs and as directed by EIC. B) Work will be executed where the furniture exist in different User Units of GE(South) Delhi including BSO's Furniture Yard as directed by Engineer-in-Charge. C) Timber shall be of seasoned 2nd class teak wood. D) The make of material shall be one of the make as per the list of make given under Srl Page No.111
Table 3'X2' with / without Drawer: FD-55/284/283/291/288
Top 16 mm thick plywood BWP grade with 0.8/1 mm thick laminate(Make- Archidply/greenply/century) in colour/shade as approved by EIC/GE and balancing white sunmica 0.8/1 mm thick with 2/1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.
Legs as per drg (Note : Each leg shall be measured and paid as one unit)
Top long rail as per drg
Top Short rail as per drg
Center Stiffener as directed by EIC
Short stiffener as per drg
Drawer made of 16 mm thick BWP plywood with 0.8/1 mm thick laminate sheet both side, shade as approved by EIC/GE with 2/1.6 mm thick PVC edging in front & sides and bottom of drawer shall be 9 mm thick BWP Plywood with 0.8 /1 mm thick white sunmica and with telescopic channel complete. All as per drg.
S/S handle.
Teak wood corner for leg as per drg.
Shoe as per sample
Table Dining 6/8 Persons : FD-273, 376/MAP
Top of dinning table 06 person 16 mm thick plywood BWP grade with 0.8/1 mm thick laminate in colour/shade as approved by EIC/GE and balancing white sunmica 0.8/1 mm thick with 2/1.6 mm thick PVC edging be fixed with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.
All as above but for 08 Pers.
Teak wood corner to leg as per drg rest all as directed by EIC/GE.
Top long rail as per drg
Top short rail as per drg
Legs as per drg. (Note : Each leg shall be measured and paid seperately)
Shoe as per sample
Table Dining 4' x 3' for JCOs/ORS: FD/MAP-II/03
Top 16 mm thick plywood BWP grade with 0.8/1 mm thick laminate in colour/shade as approved by EIC/GE and balancing white sunmica 0.8/1 mm thick with 2/1.6 mm thick PVC edging fixed with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.
Teak wood corner shall for leg as per drg.
Top long rail as per drg
Top short rail as per drg
Leg as per drg
Shoe as per sample
Table writing : FD-33,275, DB-3982
Top 16 mm thick plywood BWP grade ISI marked with 0.8/1 mm thick laminate in colour/shade as approved by EIC/GE and balancing white sunmica 0.8/1 mm thick with 2/1.6 mm thick PVC edging of fixed with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.
Teak wood corner for leg.
Leg as per drg
Foot rest as per drg
Stiffener side as per drg
Complete cabinet body except drawer/shutter with made out with 16 mm thick plywood BWP grade with 1/0.8 mm thick sumica and balancing white sunmica 1/0.8 mm thick, shade as approved by Engr-in-Charge/GE all as per drg and specified.
Back ply BWP grade as per drg.
Drawer made of 16 mm thick plywood BWP grade with bothside sumica 0.8/1 mm thick with 1.6 mm thick PVC edging through edge bander machine of shade as approved by Engr-in-Charge/GE with 2 mm thick PVC edging in front & sides and bottom of drawer shall be 9 mm thick BWP Plywood with white sunmica 0.8 mm thick including with telescopic channel complete. Rest all as per drg.
S/S handle as per sample
16 mm thick BWP grade plywood with bothside laminate sheet 0.8 mm thick of shade as approved by Engr-in-Charge/GE for Cabinet door along with magnetic catcher complete rest all as per drg and as directed by Engr-in-Charge.
Table Dressing Gents :FD-230
Mirror 5mm thick with 6 mm thick Back ply BWP grade as per drg.
Frame for mirror assembly, complete as per drg.
Complete Cabinet including drawer made of 18 mm thick Plywood ext grade with 0.8 mm thick sunmica, shade as approved by EIC/GE with 2 mm thick PVC edging in front & sides and bottom of drawer made of 18 mm thick BWP Plywood with telescopic channel complete . Rest all as per drg.
6 mm thick back ply BWP grade of table dressing box as per drg.
Peg Table :FD-277/ 384, DB-3973
Top 16 mm thick plywood BWP grade ISI marked with 0.8/1 mm thick laminate in colour/shade as approved by EIC/GE and balancing white sunmica 0.8/1 mm thick with 2/1.6 mm thick PVC edging fixed with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.
Legs as per drg. (Note : Each leg shall be measured and paid seperately).
Top Short rail as per shape & size of long rail complete as directed by Engr-in-Charge.
Center stiffener as per shape & size of sides stiffner as per drg.
Teak wood corner for leg as per drg.
Shoe as per sample
Table Bed Side :FD-276/248/MAP
S/S handles of drawers as per sample held with BSO office
Sides with 16 mm thick BWP grade plywood with both side sunmica 0.8/1 mm thick complete rest all as per drg.
Top 16 mm thick plywood BWP grade ISI marked with 0.8/1 mm thick laminate in colour/shade as approved by EIC/GE and balancing white sunmica 0.8/1 mm thick with 2/1.6 mm thick PVC edging fixed with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.
Drawer made of 16 mm thickBWP grade plywood with 0.8 mm thick sunmica of shade as approved by EIC/GE with 1.6 mm thick PVC edging in front & sides and bottom of drawer made of with 9 mm thick BWP Plywood with 0.8 mm thick white sunmica including Teliscopic Channel complete. Rest all as per drg.
Drawer made of 16 mm thickBWP grade plywood with 0.8 mm thick sunmica of shade as approved by EIC/GE with 1.6 mm thick PVC edging in front & sides and bottom of drawer made out with 9 mm thick BWP Plywood with 0.8 mm thick white sunmica and telescopic channel complete. Rest all as per drg.
Top back Sides with 16mm thickBWP plywood with 0.8 mm thick both side with 1.6 mm thick PVC edging complete rest all as per drg.
Painting to frame with two coat of enamel paint including replacement of unsv shoes and welding wherever required complete and with both side stiffner as directed by EIC
6 mm thick back ply BWP grade of table bed side as per drg.
Shelf with 12 mm thick BWP grade plywood with both side 0.8 mm sunmica with PVC edging 1.6 mm thick complete as per drg. FD-276
Sides with 16 mm thick BWP Grade plywood with both side 0.8 mm thick sunmica with 1.6 mm thick pvc edging through hot pressed machine complete and fixing arrangment with PVC corner rest all as per drg. FD-276
TOP with 16 mm thick BWP Grade plywood with both side 0.8 mm thick sunmica with 1,6 mm thick pvc edging through hot pressed machine complete and fixing arrangment with PVC corner rest all as per drg. FD-276
Table Centre :FD-274 / 235
Top 16 mm thick plywood BWP grade ISI marked with 0.8/1 mm thick laminate in colour/shade as approved by EIC/GE and balancing white sunmica 0.8/1 mm thick with 2/1.6 mm thick PVC edging fixed with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.
Legs with shoe as per drg. (Note : Each leg shall be measured and paid seperatly)
Top Short as per shape & size of long rail complete as directed by Engr-in-Charge.
Center stiffener as per shape & size of sides stiffner as directed by Engr-in-Charge.
Teak wood corner to legs as per drg.
Teapoy : FD-278, 34, 382
Top 16 mm thick plywood BWP grade ISI marked with 0.8/1 mm thick laminate in colour/shade as approved by EIC/GE and balancing white sunmica 0.8/1 mm thick with 2/1.6 mm thick PVC edging fixed with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.
Center Stiffener as per bottom rail shape irrespective of what is shown on drg complete as directed by EIC
Legs as per drg. (Note : Each leg shall be measured and paid seperately).
Teak wood corners all as per drg and as directed by Engr-in-Charge/GE.
Shoe as per sample kept in GEs office.
Bed Ply top :FD-246/247
Teak face ply 3.5 mm thick on head rest/foot rest with half round Tw beading complete as per drg
Long rail as per drg
Ply top 12 mm thick BWP Grade rest all as per drg.
Head rest complete as per drg
Foot rest complete as per drg
Stiffner as per drg
MS FI corner to each legs as per sample & as directed by Engr-in-Charge/GE.
Hat stand : FD-233
Hat stand made out with 18 mm thick BWP plywod with 1 mm thick sunmica complete as directed by Engr-in-Charge.
Mirror with other components as per drg.
Brass pegs as per sample held at BSO yard.
Chair Dining : FD-279/16/250/228
Rear legs as per drg. (Note : Each leg shall be measured and paid seperately)
Front Leg as per drg. (Note : Each leg shall be measured and paid seperately)
Seating Frame members front, back sides as per drg
Bottom/Centre stiffener as per drg
Teak wood corner to each legs as per drg.
Back strip as per drg
M&L for Re-canning of Chair Dining in Godrej pattern with oval shape 2 mm wide new off plastic cane and 3mm wide at the edge make as approved by GE including taking out old canning complete all as shown on drawing including S&F PVC shoe to each legs complete and as directed by the Eng - in - Charge.
Table computer: MAP/TP
Top 16 mm thick plywood BWP grade ISI marked with 0.8/1 mm thick laminate(Make- Archidply/greenply/century) in colour/shade as approved by EIC/GE and balancing white sunmica 0.8/1 mm thick with 2/1.6 mm thick PVC edging fixed with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.
Sides with 16 mm thick BWP grade plywood with both side 0.8 mm thick sunmica complete rest all as per drg.
Complete key board made of 16mm thick BWP grade ply wood with both side 0.8 mm sunmica with telescopic channel & 1,6 mm thick PVC beading complete rest all as per drg & as directed by Engr-in-Charge.
Complete mouse board made of 16mm thick BWP grade ply wood with both side 0.8 mm sunmica with telescopic channel & 1.6 mm thick PVC beading complete rest all as per drg & as directed by Engr-in-Charge.
M&L for one coat of synthetic enamel paint to frame including preperation of surfaces replacement of all shoes /caps complete. Rest all as per drg and as directed by Engr-in-Charge.
Chair Writing : FD-20,202,250,280
Rear legs as per drg. (Note : Each leg shall be measured and paid seperately)
Front Leg as per drg. (Note : Each leg shall be measured and paid seperately)
Seating Frame members front, back sides as per drg
Bottom/Centre stiffener as per drg
Arm rest as per drg
Back strip as per drg
M&L for Re-canning of Chairs in Godrej pattern with oval shape 2 mm wide new off plastic cane and 3mm wide at the edge make as approved by GE including taking out old canning complete all as shown on drawing including pvc shoe to each legs and as directed by the Eng - in - Charge.
Chair Easy : FD-229/ 201/17
Rear legs as per drg. (Note : Each leg shall be measured and paid seperately)
Front Leg as per drg. (Note : Each leg shall be measured and paid seperately)
Seating/back Frame members front, back,side rail as per drg
Arm rest as per drg
M&L for Re-canning of Chairs seat in Godrej pattern with oval shape 2 mm wide new off white plastic cane and 3mm wide at the edge make as approved by GE including taking out old canning complete all as shown on drawing including pvc shoe to each legs and as directed by the Eng - in - Charge.
M&L for Re-canning of Chairs back in Godrej pattern with oval shape 2 mm wide new off white plastic cane and 3mm wide at the edge make as approved by GE including taking out old canning complete all as shown on drawing and as directed by the Eng - in - Charge.
Table Office Clerk : DB-4120
Top 16 mm thick plywood BWP grade ISI marked with 0.8/1 mm thick laminate in colour/shade as approved by EIC/GE and balancing white sunmica 0.8/1 mm thick with 2/1.6 mm thick PVC edging fixed with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.
Repair of drawers with replacement of u/s parts as per drg including fixing S/S handls as per sample all as directed by Engr-in-Charge.GE.
Repair of Cabinet box with replacement of u/s parts as per drg S/S handles as per sample all as directed by Engr-in-Charge/GE.
A) M&L for melamine polish with spray machine after removing of existing polish by scrapping and smothening of surface by grinder machine wherever required or as directed by EIC to the following furniture articles all are of MES pattern viz F/DB/FD/MAP series or Similar items incl applying wax for depressed surface as well as washing with caustic soda wherever required before polishing all as specified and shown on drgs and as directed by Engineer-in-Charge. B) Work will be executed where the furniture exist in different User Units at OTM/Md Accn under the jurisdiction of GE (south) Delhi including BSO's Furniture Yard as directed by Engineer-in-Charge
Bed Plywood Top : FD-246/247
Chair Dining : FD-279/16/250/228
Chair Writing :FD-20,202,250,280
Chair Easy : FD-229/ 201/17
Hat Stand with Mirror :FD-233
Peg Table :FD-277/ 384, DB-3973
Table dining 6/8 pers : FD-273,376/MAP or similar type Drg
Table dining 4'x3' for JCOs : FD/MAP-II/03 or similar type Drg
Table 900x600mm with & without Drawer/ Table 900x900/ Table 600X600 : FD-42/55/41/223/224/231/284/283/291/293
Table Bed Side :FD-276/248/MAP
Table Centre :FD-274 / 235
Table dressing gents:FD-230
Table wrtiting : FD-33,275,DB-3982 or similsr type
Teapoy : FD-278, 34, 382
Table Office Clerk: DB-4120
Notes for BoQ:- The contract sum shall be after deducting the amount of Credit shown in Credit Schedule of this Tender.
The furniture article as and when received from Unit/Occupant as case may be, the Engineer-in-Charge (BSO) shall enter these furniture articles in furniture deposit register (IAFW-1830) and shall subsequently issue for necessary repair/polishing to the Contractor through Nominal issue voucher(NIV) mentioning the date of issue duly signed by the contractor. In certain cases the repairable furniture article can also be issued directly from units.
The contractor shall return these furniture articles after repair work on or before 30 days from the date of issue of furniture and nominal Receipt Vouchers (NRV) shall be issued duly signed by furniture I/C, BSO and Contractor.
If the contractor fails to repair and return these furniture article within 30 days, a penalty of Rs 10 per furniture article per day will be levied to contractor and the same will be recovered from contractors claims.
Generally the periodicity for issue of furniture from BSO Yard shall be once or twice in a month (reckoning from date of commencement of work as per WO No.1) subjected to the users requirement/availability of furniture for repair works. However care shall be taken that repairable furniture shall be issued not more than 20% of total qty of CA provision in one month.
Removal of Existing componants of following MES Pattern Furniture Item's Carefully without disturbing the adjoining Parts and S&F new componants of same pattern as per Drg in lieu of Dismantled /Discorded componants including Tighting the Joints, Pinning, Screwing, wedging, Gluing, Providing Hinges, Placing every part in-tact condition.
Cleaning, Derusting of Stain/Dirt old polish with Grinder machine or Sand Paper as required and as directed making the Surface smooth filling the holes with putty where ever required and Applying two coats of French Polish for wooden Items .
Replaced/ Changed parts should be First finished seperately upto the level /extent so that the Painting /Polishing on whole Items should be matched and desired finish shall be obtained.
Work will be executed where the Furniture Item's exist in different user unit's of BSO GE South New Delhi including Furniture yard of BSO's Sub Division.
M/S Shri Balaji Enterprises
M/S NEHAL ENTERPRISES
SMS Enterprises
UNIVERSAL ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .