JAD/CIVIL/CSR-1039

Earth work in excavation over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm. On plan) including disposal of excavated earth lead up to 50m and lift up to 1.5 m, dispose earth to be level and neatly dressed complete as per the instruction of Engineer-in-charge.All kinds of soil/ soft rock/ weathered rock

Return earth filling by available excavated earth (excluding rock) or locally available sand in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming(allow for breading up lumps, shrinkage etc.) watering lead upto 50 metre and lift up to 1.5 m complete as directed by the Engineer-in-charge

Supplying and filling in plinth with sand under floors, including watering,ramming, consolidating and dressing complete.

Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift upto 1.5m: All kinds of soil

Cleaning Jungle including uprooting of rank vegetation, grass, brush wood, trees and sapling of girth upto 30cm. Measured at a height of 1 m above ground level and removal of rubbish upto a distance of 2KM out side the periphery of the area cleared by your own vehicle.

Providing and laying in position Plain cement concrete 1: 2 : 4 ( 1 Cement : 2 Coarse : 4 Graded stone aggregates 20 mm nominal size) excluding the cost of centering, shuttering and cement san in foundation, footings, and bases of column as per specifications and drawings and direction of Engineer in charge.

Providing and laying plain cement concrete 1:3:6 (1 cement : 3 Coarse sand : 6 graded stone aggregate 20mm nominal size )in foundation, plinth wherever necessary including desalinating, finishing, curing etc. as per specification all complete but centring and shuttering etc.

Providing and laying reinforced cement concrete work 1:1.5:3 (1 Cement : 1.5 coarse sand : 3 graded stone aggregate using 20 mm down screened and washed) including machine mixing, placing in position and mechanically vibrating in footing, column, plinth beam up to plinth level and like including preparing of the top surface finishing curing ecomplete in all respects as per specification and direction.

Providing and laying reinforced cement concrete work 1:1.5:3 (1 Cement : 1.5 coarse sand : 3 graded stone aggregate using 20 mm down screened and washed) including machine mixing, placing in position and mechanically vibrating in beams, suspended floor landing, balconies, lintel etc.to any floor and any where and like including preparing of the top surface finishing curing complete in all respects as per specification and direction.

Hire and labour charges for providing and fixing straight shuttering for concrete works to anywhere at any floor (including staging) including strutting, propping etc. and removal of form or striking out after completion of works as directed and specified by the Engineer-in-charge. a) Foundations, footings, bases of columns plinth beam etc

b) Suspended floors, roofs, landings, balconies, shelves etc.

c) Lintels, beams, cantilever etc.

Steel reinforcement (for reinforced cement concrete work) including transporting, decoiling, straightening, derusting, placing, cutting to requisite length, hooking, bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection including removal of loose rust and applying a coat of cement wash if necessary complete in all respects as per drawing and at any floor as directed.

Brick work with bricks of class designation 75 in foundation and plinth in: Cement mortar 1:6 (1 Cement : 6 Coarse sand) .

Brick work with bricks of class designation 75 in superstructure with cement mortar 1:6 (1 cement : 6 course sand) including all materials, labour, scaffolding, racking out joints, curing as per specification and direction of the Engineer-in-charge.

Half brick masonry with bricks of class designation 75 in super structure above plinth level upto floor V Level.Cement mortar 1:4 (1 cement: 4 course sand).

Coursed rubble masonry (second sort) with hard stone in foundation & plinth in:-Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and fixing factory made solid core, commercial flush door shutters non-decorative type, core of block board construction with well seasoned chemically treated timber of moisture content, not exceeding 12 per cent and side styles, top and bottom rails of main width as per I.S. Code, well seasoned hard wood chemically treated and well matched commercial ply veneering with vertical grains on cross bends on both faces of shutters, hot pressed and banded with phenol formaldehyde synthetic resin conforming to I.S./ 2202 (part –I) / 1930. A) 35mm thick shutter with 100mm oxidized S.S. butt hinges with necessary screws for double or single leaf shutters complete.

Providing and fixing aluminum. (Heavy type) sliding door bolts with nuts and screws etc. complete.a) 300 x 16mm

Providing and fixing bright finished brass casement window fasteners of minimum weight 200 grams to side hung steel windows with necessary welding and machine screws etc. complete.

Providing and fixing bright finished brass peg stays 300mm long of minimum weight 330 grams. to side hung steel windows with necessary welding and machine screws etc. complete.

Providing and fixing anodized aluminum tower bolt including necessary screws etc. complete.250 X 10mm

Providing and fixing anodized aluminum door handle including necessary screws etc. complete.a) 125mm

24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides.The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter).

Providing and fixing Structural steel work reveted,bolted or welded in built up sections, trusses and framed work ,including cutting hoisting, fixing in position and applying a priming coat of approved steel primer.

Brick on edge flooring with bricks of class designation 7.5 on a bed of12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks:

Providing and laying for 40mm thick Cement concrete in flooring, in ratio 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate) finished with a floating coats of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete including cost of all materials but excluding cost of cement.

Providing and laying for laying decorated colour back ground ceramic tiles of reqd. size in wall/floor laid on 10mm thick cement mortar 1:3 ( 1 cement : 3 coarse sand) finishing with flush painting in white/ color cement as required. Tiles should be standard quality of Spartek/Somany.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey,Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm includingpointing the joints with white cement and matching pigment etc., complete.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(i) Single socketed pipes.110 mm diameter

12 mm cement plaster of mix : 1: 6 (1 cement : 6 coarse sand )

Providing neat cement punning about 1.5mm thick in wall, dado, window sills, plinth etc. and like at any level to anywhere as directed and specified by the Engineer-in-charge.

White washing with lime to give an even shade : New work (three or more coats).

Supplying and Painting with synthetic enamel paint/ aluminum paint of approved brand and manufacture Two or more coats in new work..Two or more coats in new work.

Finishing walls with waterproofing cement paint of approved brand and manufacture and of required shade to give an even shade.New work (three or more coats)

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.m including cutting the patches in proper shape, raking out joints and preparing and plastering( 1 :4 ) the surface of the walls complete shade including cost of all materials, labours, scaffolding, tools and tackles , disposal of rubbish to the dump yard with in 50 M lead excluding the cost of cement.

Providing and fixing of glass panes, with putty and nails wherever necessary: Glass panes 4mm thick.

Removing white or color wash snowcem/distemper by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Demolishing of Cement conc. including disposal of material within 50m lead.1:3:6 or Richer Mix

Dismantling of old brick work including stacking of serviceable material and disposal of unserviceable material within 50m lead.In cement mortar.

Dismantling of old plaster or skirting raking out joints and cleaning the surface of plaster including disposal of rubbish to the dumping yard with 50 mtr. lead.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: A) White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing white vitreous china wash basin with C.I./ M.S. brackets, 15mm C.P.brass pillar tap (single) 32mm C.P. brass waste of standard Pattern, including PVC waste pipe and PVC connector pipe including painting of fitting and brackets , cutting and making good the walls wherever required.a)Wash basin size: 550 X 400mm.ISI Marked.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin with all fittings of 430x260x350 mm or 340x410x265 mm sizes respectively.

Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe.

Providing and fixing 32 mm dia. P.V.C. flexible waste pipes for sinks and wash basins.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic molded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm.

Providing and fixing I.S.I marked bend of required degree with access door, insertion of rubber washer 3mm thick nuts and bolts complete.100mm dia S.C.I. Pipe (S & S)

Providing and fixing I.S.I marked sand cast iron collar:-100mm

Providing and refixing of 1st quality Tata Gindal make G.I.Pipe Removing of old G.I.Pipes and complete with G.I.Fittings and clamp including cutting and making good the wall etc. A) 15mm dia Nominal bore

b) 20mm dia. Nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : A) 25 mm nominal bore

B)20 mm nominal bore

C) 15 mm nominal bore

Providing and fixing gun metal non- return valve of approved quality (screwed end) :25mm nominal bore A)Horizontal

B) Vertical

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter

Providing and placing on terrace polyethylene water storage tank ISI: 12701 with cover and suitable locking arrangement and making necessary holes for inlet and outlets and overflow pipe but without fittings and base supports for tank.(1000 Litre each)

Providing and fixing heavy duty C.P brass bib cock of 15mm nominal bore as per approved sample (Brand:-Jaquar/Omco).

Providing and fixing heavy duty C.P brass stop cock (concealed) of 15mm nominal bore as per approved sample. (Brand:-Jaquar).

Providing and fixing 100mm dia I.S.I marked S.C.I. pipe for soil/vent pipe.

Providing, laying and jointing glazed stone ware pipes 150mm dia grade – A with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. excluding the cost of cement.

Providing, laying cement concrete 1:5:10 (1 cement : 5 coarse sand 10 stone aggregate of 40mm size) all round S.W.pipes including bed concrete as per standard design . 150mm dia S.W. pipe

Making soak pit 2.5m diameter 3.0 metre deep with 45x45 cm dry thick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100mm diameter, 1.8m long complete as per standard design.

PART-B Drilling of 5” dia bore hole

Providing and fixing of 5” dia PVC casing pipe

Supply of Accessories : a) 32mm ball valve ALTO

b) 32mm Non-return Valve ALTO

c) 32mm M.S. Clamp to hold pipe

d) G.I. Nipple 32mm

e) G.I. Bend 32mm

f) Bore well cover , size- 5”

g) Pressure Gauge

h) PVC Tape 02 Roll, Taplon Tap 10 Roll, M-Seal 20 pkt.

Installation charges of Pump & above item in position charge

a)Supply of G.I. pipe, including G.I Union, Elbow, Socket, Reducer of pipe line (Make:- Jindal, Medium) size 1” dia

b) Size ¼” dia

c) Size ½” dia

d) Valve size ¼” dia

e) Valve Size ½” dia

Providing and laying single layer brick flat soling with over burnt / picked jhama bricks including preparing and levelling the bed and filling the joints with locally available coarse sand after dismantling old one

40 mm Thick cement concrete flooring 1:2 :4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 m nominal size) finished with a floating coat of neat cement including cement slurry

Providing and applying with synthetic enamel paint two or more coats with approved brand and shade ready mixed paint including primer as directed by manufacture with a monogrammed of UCIL and date of repairing.

Proviiding & installation of Solar Powered 01 HP submersible Auto run & stop DC/AC pump motor (waareo DOO Wp) of stainless steel suitable for minimum 125 x115 mm bore well operating head 60 meter discharge rate minimum 2000 LPH with lowering up to 60 mtrs 32mm dia UPVC schedule 80 column pipe & 23.5 Sq mm x 3 core flat submersible cable of IS694:1190. 1. Including Monil/polucrystaliune pv array (900 wp) mounted on suitable direction to optimize panel uses and withstand the wind pressure up to 200 km ph & making suitable arrangements to operate hand pump manually in the same bore when there is no solar power including 5 year warranty against defects in materials & workmanship with locking arrangement of switchboard all complete. The system should be eco-friendly

Installation & fixing of push cock

Supply and fitting of hot dip galvanized steel staging composite structure

HDPE water tank (ISI make) 1000 Ltr capacity with cover & locking arrangement

S C PRASAD CO

VARUN ENTERPRISES

M/S. P.B ENTERPRISES

M/s S.S.CONSTRUCTION

M/S A K ENTERPRISES