REPAIR MAINTENANCE OF EM INSTALLATIONS INCLUDING STP BR WORKS UNDER AOR OF AGE BR III AT BB CANTT SRINAGAR

Amount

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but n exc 4 sqm each complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) not exc. 1.5 sqm each complete all as specified and as directed.

Taking down shutters of any description n exc 1 sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and as directed.

S&F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S&F 35mm thick second class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) and fitted to chowkats complete all as specified and as directed.

S&F 35mm thick factory made plain framed, panelled shutter (two panel) with lock rail (2nd class HW rail and style) and panel of 9 mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

S&F 150 mm size aluminium handles, cast type, anodised complete all as specified and as directed.

S&F 100 mm size aluminium handles, cast type, anodised complete all as specified and as directed.

S&F 200 mm long (Length of bolt) aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F 150 mm long (Length of bolt) aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S&F 300mm long (Length of bolt) mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed.

M&L for preparation of new wood and wood based surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion in concrete, brick work, masonry, etc. and making good disturbed ground complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed.

S&F 0.63 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile over and including 10 mm thick backing coat in cement mortar (1:3) complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for 25 mm thick cement concrete (1:2:4) type B0 (using 12.5mm graded crushed stone aggregate) as in levelling course, sub-floors, sub-bases, etc. and finishing surfaces of concrete even and rough to receive the topping layer complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed.

M&L for chequered cement concrete tiles with white cement and pigments 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block with grey cement and no pigments any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade over and including 25mm thick sand cushioning complete all as specified and directed.

M&L for factory made precast cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in road side kerb stone of size & shape as directed by Engineer-in-Charge set in cement mortar (1:4) complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick laid over and including cement screed bed in CM (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including 10 mm thick backing coat in cement mortar (1:3) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for 75 mm thick cement concrete (1:4:8) type D2 (using 40mm graded crushed stone aggregate) as in sub-floors, sub-bases, etc. and finishing surfaces of concrete even and rough to receive the topping layer complete all as specified and directed.

M&L for 75mm thick cement concrete (1:3:6) type C1 (using 40 mm graded crushed stone aggregate) as in plinth protection etc finished cement concrete even and smooth without using extra cement and filling the construction joints with mastic filling complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces, rendering is to be finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces, rendering is to be finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for preparation of newely plastered or unplastered wall surfaces and applying two coats of cement base paint complete all as specified and directed.

M&L for preparation of newely plastered or unplastered wall surfaces and applying two coats of distemper oil emulsion over a coat of suitable primer complete all as specified and directed.

Dismantling brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.

S&F in repairs Vitreous China Squatting Pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including provision of cement concrete bedding complete all as specified and directed.

S&F in repair 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, 32mm dia PVC flush pipe and connections to pipes complete all as specified and directed.

S&F in repair Vitreous China wash basin, white, flat back, size 580x450 excluding taps, waste, chain and plug and porcelain stopper but including bracket any size, including cutting for and pinning in ends of brackets including 15 mm bore centre hole brass CP mixer for mixing hot & cold water screwed down for iron pipe and waste pipe complete all as specified and directed.

S&F in repair Angle valve / Stop valve 15mm dia fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repair CP brass soap dish, heavy duty, fixed with chromium plated brass screws complete all as specified and as directed.

S&F in repair CP towel ring 200mm dia fixed with chromium plated brass screws complete all as specified and as directed.

S&F in repair CP steel grating 75/100mm dia complete all as specified and directed.

S&F in repair 15mm dia Bib taps, chromium plated, fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Dismantling PVC water tanks exc 500 litres and not exc 1000 litres capacity etc complete all as specified and directed.

S&F 1000 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layered hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F in repair 20mm bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F in repair 20mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair 25mm outer dia, 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

S&F in repair 32mm outer dia, 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

S&F PP-R Gate valves (brass insert) 25mm outer Dia as per requirement of the site complete all as specified and directed.

S&F PP-R Gate valves (brass insert) 32mm outer Dia as per requirement of the site complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints and including necessary fittings fixed to walls complete all as specified and directed.

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints and including necessary fittings fixed to walls complete all as specified and directed.

M&L for second class soft-wood wrought in scantlings inccluding dismantling of old timber scantling complete all as specified and directed.

S&F in repairs 6mm thick plywood with 5 Nos of ply, grade BWR, type BB, fixed with screws to timber frame work as in wall and ceilings complete all as specified and directed.

S&F 2nd class hard wood Plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads of size exc 13 Sqcm and n exc 25 Sqcm complete all as specified and directed.

S&F in repairs 15 mm bore Brass CP Wall mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.

M&L for preparation of old distempered surfaces of walls by washing, rubbing down and stopping and applying two coats of distemper oil emulsion complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Complete removal of the existing treatment on walls by scraping and washing down with water and applying two coats of distemper oil emulsion over a coat of suitable primer over 1mm thick wall care putty complete all as specified and directed.

M&L for preparation of old decorated plastered surfaces of walls and applying a coat of cement base paint complete all as specified and directed.

M&L for mild steel work in hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Dismantling of fencing wire mesh, any type complete all as specified and directed

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

Supply only chain link MS galvanisd fencing, any size or type complete all as specified and directed. Note : Actual weight of the fencing shall be ascertained by Board of Officers to be convened by GE.

M&L for preparation of new or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for preparation of newely plastered or unplastered of walls surfaces and applying two coat of acrylic exterior emulsion paint over a coat of primer complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

S&F in repairs galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long with dia of neck 5 to 10mm complete all as specified and directed.

M&L for hardcore of gauge n exc. 63 mm, broken stone or boulders deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surfac complete all as specified and directed.

M&L for mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips conforming to Fe-410-W (Gde. E-250) Part- I quality-A or Fe 290 (Gde - E-165) complete all as specified and directed.

M&L for plain cement concrete (1:3:6) type C2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for plain cement concrete (1:3:6) type C1 (using 20 mm graded crushed stone aggregate) as in as in surface channels and drains complete all as specified and directed.

M/S Ghulam Mohammad Shalla

M/S Tajamul Ah Buchh

GHULAM NABI GILKAR AND CO

M/S Vivek Gupta and Co

M/S PARVEZ AHMAD LONE