Development of Street for People at the following locations. Site A Governor Road between Johnstone School and BT Park Site B Turel mapal (new Lambulane ) Road. (Connecting Nongpok Thong). (Nongpok thong to Ananda Singh Hr. Sec Academy).

Amount

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable materialwithin 50 metres lead as per direction of Engineer-in-charge - In Cement mortar

Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: Channels, angles, tees and flats

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m - All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level - 1:4:8 ( 1 Cement: 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforce cement concrete work including pumpinf of concrete to site of laying but excluding the cost of centering, shuttering, and reinforcement , including admixture in recommended proportion as per IS 9103 to accelerate, retardn setting of concrete, improve workability without impairing strength and durability as per direction of Engineer- in charge. M25 grade reinforce cement concrete by using 380 kg of cement per cum of concrete. All worl upto plinth level.

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete work including pumping of concrete to site of laying but excluding the cost of centring, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. M-25 grade reinforced cement concrete by using 380kg. of cement per cum of concrete. All work above Plinth Level upto floor V Level.

Centering and shuttering including strutting, propping etc. and removal of form for:

(i) Foundations, footings, bases of columns, etc. for mass concrete.

(ii) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

(iii)Suspended floors, roofs, landings, balconies and access platform.

(iv) Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level - Thermo-Mechanically Treated bars

Brick work with Ist class common burnt clay F.P.S. (non modular) bricks in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

15 mm cement plaster finished with a floating coat of neat cement of mix : 1:3 ( 1 cement : 3 fine sand)

Neat cement punning

Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc. complete - Electric resistance or induction butt welded tubes.

Providing and fixing wire mesh to Steel welded built sections as per direction of Engineer-in-charge (Steel frames to be paid separately)

Providing and laying 60 mm thick factory made cement concrete interlocking paver block (Rubber Moulded) of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design / shape laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand etc. all complete as per the direction of the Engineer-in-charge.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement: 4 coarse sand) - 25 mm thick.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture.

Painting Two coats on New Concrete surfaces ( painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces)

Providing and fixing Cast Iron benches.

Stainless steel dustbin with frame (80l)

Providing and fixing Murals- 12 feet tall

Signage

Providing laying and compacting Granular Base/Sub base with naturally occuring Sand Gravel Material free from organic ore other deleterious constituent spreading with Motor Grader and compacted be rolling with power roller of 8-10 capacity in layers not exceeding 150 mm (spread thickness)

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete work including pumping of concrete to site of laying but excluding the cost of centring, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. M-25 grade reinforced cement concrete by using 380kg. of cement per cum of concrete. All work above Plinth Level upto floor V Level.

Centering and shuttering including strutting, propping etc. and removal of form for:

(iii)Suspended floors, roofs, landings, balconies and access platform.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level - Thermo-Mechanically Treated bars

Brick work with Ist class common burnt clay F.P.S. (non modular) bricks in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

Half brick masonry with Ist class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in Cement mortar 1 : 4 (1 cement : 4coarse sand)

15 mm cement plaster finished with a floating coat of neat cement of mix : 1:3 ( 1 cement : 3 fine sand)

Neat cement punning

Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc. complete - Electric resistance or induction butt welded tubes.

Providing and laying 60 mm thick factory made cement concrete interlocking paver block (Rubber Moulded) of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design / shape laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand etc. all complete as per the direction of the Engineer-in-charge.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement: 4 coarse sand) - 25 mm thick.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture.

Painting Two coats on New Concrete surfaces ( painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces)

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/vibratory roller in stages to proper grade and camber, applying and brooming requisite type of screening/binding Materials to fill up the intertices of coarse aggregate, watering and compacting to the required density (B) By Manual Means - (i) Grading - I (Aggregate size - 63 mmmm to 45mm) - (a) Using Screening Crushable type such as Moorum or Gravel

Bitumunious Macadam (Providing and laying bituminous macadam with 100-120 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction) - (i) for Grading I ( 40 mm nominal size ) - (a) VG - 40

Close Graded Premix Surfacing/Mixed Seal Surfacing (Mechanical means using HMP of appropriate capacity not less than 75 tonnes/hour. Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.09 mm (Type-a) or 13.2 mm to 0.09 mm (Type-b) aggregates using penetration grade bitumen to the required ine, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled roller 8-10 tonne capacity, and finishing to required level and grade. ) - Type - A

Seal Coat ( Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A and B seal coats) - (i) Case - I : Type A

Road Marking with Hot Applied Thermoplastic Compund with Reflectorising Glass Beads on Bituminous Surface (Providing and laying of hot applied thermopalastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes)

Providing and fixing Cast Iron benches.

Stainless steel dustbin with frame (80l)

TRAFFIC :-

Retro- Reflectorised Traffic Signs. Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC: 67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75mm x 6mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.

90 cm equilateral triangle

60 cm equilateral triangle

60 cm circular

80 cm x 60 cm rectangular

60 cm x 45 cm rectangular

60 cm x 60 cm square

90 cm high octagon

Direction and Place Identification Signs upto 0.9 sqm Size Board. Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75x75x6mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45x45x60 cm . 60 cm below ground level as per approved drawing.

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m - All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level - 1:4:8 ( 1 Cement: 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforce cement concrete work including pumpinf of concrete to site of laying but excluding the cost of centering, shuttering, and reinforcement , including admixture in recommended proportion as per IS 9103 to accelerate, retardn setting of concrete, improve workability without impairing strength and durability as per direction of Engineer- in charge. M25 grade reinforce cement concrete by using 380 kg of cement per cum of concrete. All worl upto plinth level.

Centering and shuttering including strutting, propping etc. and removal of form for:

(i) Foundations, footings, bases of columns, etc. for mass concrete.

(i) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

(ii)Suspended floors, roofs, landings, balconies and access platform.

(iv) Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level - Thermo-Mechanically Treated bars

MAVEN INFRASTRUCTURE PROJECTS PRIVATE LIMITED

Meetei Construction Private Limited