Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.6 LAccepted-AOC | L1 | Accepted-AOC ok | |
| 2 | L2₹35.6 L+₹99,389 (2.87%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹43.4 L+₹8.8 L (25.5%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | Rejected-Technical 101 AWADH RESIDENCY ARYA SAMAJ ROAD DANAPUR PATNA PATNA BIHAR 801503 | PATNA | BIHAR | 801503 | - | Rejected-Technical NO IN WLR |
Tender Value
₹48.5 L
EMD Value
₹97,000
Closing Date
24 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF BIHTA
Air Force Station Bihta - 801103
ADDITION/ALTERATION TO LIVING-IN-ACCOMMODATION OF SNCOS AND ONE MINOR WORK AT AF STN BIHTA (PHASE-II)
2023_MES_587285_1
8301/BHT/E8
Open Tender
Civil Works
Item Rate
180 days
BIHTA
CLASS D Category a(i)
7 documents required · 7 mandatory
₹500
GE AF BIHTA
₹97,000
Yes
20 Jun 2023
28 Mar 2023
2 May 2023
28 Mar 2023
24 Apr 2023
11 Apr 2023
28 Mar 2023 - 4 Apr 2023
Amount
Taking up or down steel tubing 15 mm dia and connections including cleaning for refixing or removal to store, complete all as specified and directed.
Taking up or down steel tubing 20 mm dia and connections including cleaning for refixing or removal to store, complete all as specified and directed.
S&F 15 mm dia GI tubing, medium grade, with all fittings and fixed complete to walls, ceilings and floors, complete all as specified and directed.
S&F 20 mm dia GI tubing, medium grade, with all fittings and fixed complete to walls, ceilings and floors, complete all as specified and directed.
S&F in repair 20 mm dia ball brass valve, high pressure with polythene float and fly nut, screwed down for iron pipe, complete all as specified and directed.
S&F in repair gun metal globe or gate valve of size 20 mm dia with iron wheel head screwed both ends and for iron pipe & fixed, complete all as specified and directed.
S&F in repair angular stop valve 15 mm nominal dia cast copper alloy, fancy type, chromium plated, screwed down high pressure with crutch or butterfly handle screwed one end for iron pipes or for unions and fixed, complete all as specified and directed.
S&F in repair stop valves 15 mm nominal dia, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete all as specified and directed.
S & F in repair of chromium plated 125 mm long shower rose with or without swivel joints, any size, incl fixing to steel pipe or union, complete all as specified and directed.
S&F in repair bib taps, cast copper alloy, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm dia GI pipe or for brass ferrule or to GI socket complete all as specified and directed.
S & F in repair of PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality, complete all as specified and directed.
S&F in repair soap dish made of stainless steel, approx size 120x100 mmx 1 mm thick, fixed to walls with plugs & SS screws, complete all as specified and directed.
S&F in repair 'D' type towel rail 60 cm long, stainless steel, fancy type, 20 mm dia, fixed with stainless steel screws, complete all as specified and directed.
S & F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including trap set in and including concrete and connection to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor, complete all as specified and directed.
S&F in repair white vitreous china wash down water closet pan (pedestal pattern), including white plastic seat cover with flat bottom and mild steel chromium plated or aluminised hinging device (excluding flushing cistern and flush pipe) including connection to drain (or out going pipe) and to flushing pipe, anti syphonage pipe, etc, complete all as specified and directed.
S&F in repair 10 Ltr capacity PVC low level flushing cistern, top push type with inlet ball valve, PVC float, brackets including superior quality PVC flush pipe of 32 mm dia, complete all as specified and directed.
S&F in repair vitreous china wash hand basin white with flat back of size 550x400 mm, excluding chain and plug, taps and porcelain stopper but incl superior quality PVC waste pipe of 32 mm dia and one pair of 600 mm long cast iron brackets, complete all as specified and directed.
S&F in repairs vitreous china wash hand basin, counter sunked in any stone slab, white of size 450 x 300 mm including waste coupling, superior quality PVC waste pipe and connection 32 mm bore complete all as specified and directed.
S&F in repair vitreous china urinal, bowl type (back or corner wall type), of size 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, complete all as specified and directed.
S&F in repair 15 mm bore fancy type pillar taps, cast copper alloy, with capston heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts, screwed to PVC Connection and fixed, complete all as specified and directed.
S&F 500 Ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl dismantling existing water tank, complete all as specified and directed.
S&F PVC (SWR) floor trap including jointing to waste pipe with solvent cement, diameter of outlet 75mm, complete all as specified and directed.
Dismantling existing cast iron soil, waste & vent pipes upto 100 mm internal dia, fixed to wall or laid in trenches incl all fitting & accessories, complete all as specified and directed.
S & F 100 mm dia spun cast iron soil waste and vent pipes sand cast in any length with or without laid in trenches or in floor with cement joints, complete all as specified and directed.
S & F 75 mm dia spun cast iron soil waste and vent pipes sand cast in any length with or without laid in trenches or in floor with cement joints, complete all as specified and directed.
S & F 100 mm bore cast iron bends of any radius diminshing pieces or tappers (larger bore measured), complete all as specified and directed.
S & F 75 mm bore cast iron bends of any radius diminshing pieces or tappers (larger bore measured), complete all as specified and directed.
Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site, complete all as specified and directed.
Taking down chowkats or frame with shutter (without taking out shutter from the frame) exceeding 1.50 sqm and n exc 4.00 sqm each and removal from site, complete all as specified and directed.
Taking down of shutters of any description exc 1.00 Sqm but n. exc 2 Sqm each, complete all as specified and directed.
S & F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixed in opening complete as per manufacturer's specifications and as directed by Engineer-in-Charge.
S & F for 30 mm thick factory made solid panel PVC door shutter conferming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings ass as directed by Engineer-inCharge.
S & F pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs hinges lock strike plate etc, complete all as specified and directed.
M & L for PCC 1:3:6 Type C-0 (using 12.50 mm graded stone aggregate) as in filling back side of pressed steel door frames and the like, complete all as specified and directed
S&F 35mm thick factory made IInd Class Hard wood (Hollock) glazed and skeleton, open rebated, prepared to receive glass, gauge etc, without sash bars, edges of framing plain, chamfered and rounded, fitted with cut and mitered beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed.
S&F 40mm thick factory made IInd Class Hard wood (Hollock) paneled door shutters single panel with lock rail and panel of 9mm B.W.P. marine grade plywood bonded with high quality liquid phenol formaldehyde synthetic resin adhesive conforming to IS-710 or 12mm thick particle board veneered with commercial veneering on both faces. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed.
S&F steel ventilators with top hung shutters including projecting type hinges with steel handle and steel peg stay, complete without glazing bars, including one shop coat of zinc chromate primer, complete all as specified and directed.
S&F steel windows with side hung double shutters (inside guaze & out side glazed shutter) with pressed steel box type frame, including box type hinges, with steel handles, steel peg stay complete including window grill with & without glazing bars, frame fixed with MS screw 100mm dovetailed or welded including one shop coat zinc chromate primer, Ref TD-CE/ALD/TD/-172 sheet 1/2 & 2/2 (PWF windows), complete all as specified, shown on drawings and as directed. (PCC filling for window frame shall be measured and paid separately.)
M&L for 2nd class hard wood (Sal) plain, solid, straight chowkhats and frames, wrought, framed, rebated on the solid, rounded or chamfered put together with glue, pinned at joints, supplied and fixed, complete all as specified and directed.
M&L for 25 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames or stones, concrete or brick surrounds, glazed with putty or fixed with glazing pins/clips etc.
M&L for 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane, complete all as specified and directed.
M&L for figured glass, 3 mm thick, pin head type and glazing with oil putty in squares not exc. 0.50 Sqm in each pane complete all as specified and directed.
S&F 0.56 mm dia MS galvanised wire cloth with average width of aperature 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.
S&F in repair 0.56 mm dia MS galvanised wire cloth with average width of aperature 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.
S&F aluminium anodised barrel tower bolt of extruded section 200 mm long and fixed, complete all as specified and directed.
S&F 250 mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed.
S&F 150 mm size aluminium handles, cast type, anodised, complete all as specified and directed.
S&F 300 mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed.
S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor, overall length of cover plate 140 mm, complete all as specified and directed.
S&F for 100 mm long mild steel butt hinges, heavy weight cold rolled mild steel and fixed, complete all as specified and directed.
S&F for 75 mm long mild steel butt hinges, heavy weight cold rolled mild steel and fixed, complete all as specified and directed.
S&F 100 mm size aluminium handles, cast type, anodised, complete all as specified and directed.
S&F 100 mm long hasp & staple safty type anodised aluminium with mild steel hinge pin bolt to hinge plate and fixed with screws, complete all as specified and directed.
Taking down cement plaster of any description and thickness on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.
M & L for 10 mm thick rendering in CM (1:6) on fair faces of brick walls or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed.
M & L for 5 mm thick rendering in CM (1:3) on fair faces of ceiling surfaces, finished even and smooth without using extra cement, complete all as specified and directed.
M & L 15 mm thick rendering in CM (1:4) on fair faces of brick walls or concrete surfaces, finished even and smooth without using extra cement with using water proofing compound, complete all as specified and directed. (WPC will be measured and paid separately).
Supply only integral water proofing compound of approved quality, ISI marked, complete all as specified and directed.
M&L for applying two coats of cement based paint over a coat of primer on newly plastered surfaces of walls including preparation of surfaces, complete all as specified and directed.
M&L for applying two coats of cement based paint over a coat of primer on newly plastered surfaces of walls including complete removal of existing treatment from previously treated walls, complete all as specified and directed.
M&L for applying three coats of white wash on ceiling including preparation of new surface, complete all as specified and directed.
M&L for applying two coats of white wash on ceiling including preparation of old previously treated surfaces of ceiling, complete all as specified and directed.
M&L for applying a layer of 2 mm thick wall care putty as per manufacturer's instructions on walls and over it applying two coats of distemper oil emulsion over a coat of alkali resistant primer including preparation of surfaces, complete all as specified and directed.
M&L for complete removal of existing treatment of wall and applying two coats oil bound distemper over a coat of alkali resistant primer over a layer of 2mm thick wall care putty, complete all as specified & as directed .
M&L for preparation of old decorated plastered surfaces of wall and applying two coats of white wash, complete all as specified and directed.
M&L applying two coats of synthetic enamel paint over a coat or pink primer on wood or wood based surfaces, exceeding 10 cm in width or girth, incl preparation of the new surfaces, complete all as specified and directed.
M&L applying two coats of synthetic enamel paint on wood or wood based surfaces, exceeding 10 cm in width or girth, incl preparation of the old previously treated surfaces, complete all as specified and directed.
M&L for preparation of primer coated new steel surfaces and applying two coats of synthetic enamel paint (ordinary tint) of any description, over 10 cm in width or girth, not otherwise described, complete all as specified and directed.
M&L for preparing new steel surfaces exceeding 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chromate primer, complete all as specified and directed.
M&L for preparation of old painted steel surfaces and applying one coat of synthetic enamel paint (ordinary tint) of any description, over 10 cm in width or girth, not otherwise described, complete all as specified and directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc, complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floor and pavings n.exc 15 cm thickness (below or above GL), complete all as specified and directed.
M&L for 25mm thick plain cement concrete 1:2:4 type B-0 (using 12.50 mm graded stone aggregate) as in flooring/sub base finished even and fair to receive floor finishes/screed, complete all as specified and directed.
M&L for joint free non skid ceramic coloured tiles, 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, laid over and including 15 mm thick screed bed in CM 1:6, complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing tiles and rubbish off the premises, complete all as specified and directed.
Demoliton of stone slabs and tiles of any description or thickness in floors, apron, platform etc laid, bedded and pointed in any mortar, complete all as specified and directed.
M&L for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed.
M & L glazed ceramic coloured tiles of approved quality ISI marked (450 X 350 X 7 mm / 450 x 300 x 7 mm / 350 x 250 x 7 mm thick) as in vertical surfaces such as skirting dados etc set jointed in neat cement slurry and pointed in coloured cement to match with the tiles including 1:4 cement plaster 10 mm thick on brick work and concrete surface, complete all as specified and directed.
M & L Non-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles including 15 mm thick screed bed 1:6 all as specified and directed.
S&F stainless steel tubular curtain rods, 25 mm dia, with fixing brackets and one pair of decorative end caps etc, complete all as specified and directed.
Dismantling of Brick tiles or terracing tiles, single layer on roofs, complete all as specified and directed.
Dismantling of Textile old roof coverings including frames (if any), complete all as specified and as directed.
Demolition of concrete of any description & in any position not otherwise specifically provided and removing debris outside MD Land, complete all as specified and directed.
M&L for providing cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) as in roof padding, roof kerbs (rounded or chamfered on edge) etc, complete all as specified and directed.
M&L for providing, cement concrete type C1 1:3:6 (using 20 mm graded crushed stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges, complete all as specified and directed.
M&L for 10 mm thick rendering on roof surfaces in CM 1:4 with using WPC as per manufacturer's instructions, finishing surfaces even and smooth without using extra cement, complete all as specified and directed. (Note: WPC shall be measured and paid separately under appropriate item.)
M&L for applying bituminous primer @0.40 Ltr/sqm on dried surface after cleaning the dust etc, complete all as specified and directed.
M&L for applyng tack coat of hot blown bitumen 85/25 grade conforming to IS-702 @1.2 kg per Sqm including cleaning surface etc, complete all as specified and directed.
M&L for providing polymeric water proofing membrane consisting of 90 to 100 micron thick central core of HMHDPE film with standard weight not less than 3 Kg/Sqm shall be laid with 100 mm side lap/end lap on prepared surfaces as per manufacturer's instructions and under strict supervision of manufacturer's technical representative, complete all as specified and directed.
M&L 40mm thick brick tiles bedded in 20 mm thick cement mortar 1:4 and joints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement, complete all as specified and directed.
Excavation in trenches in soft/loose soil n. exc. 1.5m wide and n.exc 1.5m in depth for laying/taking out under ground cables or for foundations etc and getting out, complete all as specified and directed.
Returning, filling in soil including spreading, leveling, watering and well ramming in layers n.exc 250mm thick, complete all as specified and directed.
Removing excavated material (Surplus soil) to a distance not exc 50m and depositing where directed at level not exc. 1.5m above the starting point, complete all as specified and directed.
M&L PCC 1:4:8 type D-2, using 40 mm graded stone aggregate, as in foundation, filling, mass concreting etc, complete all as specified and directed.
M&L PCC 1:2:4 type B-2, using 40 mm graded stone aggregate, as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses, columns, pillars, boundary pillars and posts (including caps and bases), complete all as specified and directed.
Formwork (fair finished surfaces) to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; or other similar work, vertical or to batter, complete all as specified and directed.
Taking down copper/aluminium point wiring (light, fan socket or power) complete fittings such as switches, sockets, ceiling rose, pendents, regulators etc complete as ordered and removing retrieved materials and making good the disturbed surface of wall, floors, ceiling etc complete all as specified and directed.
Taking down carefully unserviceable sub main wiring of any size and type including making good the disturbed surfaces of walls, ceilings etc including two coats of white /colour washing/ distempering etc to match the existing complete all as directed by EIC.
Taking down carefully unserviceable distribution boards/metal enclosures of any type and capacity including wooden board and making good the disturbed surfaces of walls, ceilings etc including two coats of white/colour washing/ distempering etc to match the existing complete all as directed by EIC.
Material and Labour for wiring complete 1.5 sqmm FRLS grade single core PVC insulated, unsheathed, 1100V grade copper multistranded conductor drawn through and including rigid PVC conduit pipe on walls, surface on roofs and beam etc including PVC insulated copper earth continuity conductor 1.5 Sqmm cable connected to common earth dolly including steel terminal boxes made out of 1.6mm thick MS sheet concealed in walls with laminated sheet top cover 3mm thick for housing the switches, sockets regulators etc all as specified and directed for: - a) One light point/fan point/exhaust fan point/bell point controlled by one switch with cable 1.5 sq mm.
(b) One 3 pin /5 pin socket outlet 5 Amp controlled by 1 No one way 5/6 Amp switch on independent board.
(c) One 3 pin /5 pin socket outlet 5 Amp controlled by 1 No one way 5/6 Amp switch on same board along with other switches, fan regulator etc.
Point wiring with PVC insulated unsheathed stranded copper conductor cable of size 2.5 Sqmm, with PVC insulated unsheathed stranded copper conductor cable FRLS of size 2.5 Sqmm stranded for earth continuity wire, to be drawn in rigid PVC medium grade concealed conduit not less then 20 mm dia with MS sheet metal sunken switch/Terminal box 1.6 mm thick and phenolic laminated sheet cover 3.0 mm thick and brass screws with cup washers for one socket outlet 15 amp on independent board including all necessary wall cutting and making good disturbed surface all as directed and specified. Note for item of point wiring: Rate for wall cutting for switch/terminal boxes & chase cutting for concealing conduits and making good disturbed surfaces to match with the adjoining surface shall be deemed included in the unit rate.
S&F switch piano flush button single pole one way 6 Amp, 220 Volts, complete all as specified and as directed by Engr-in-Charge.
S&F switch socket combination, 5/6 Amps, 220 volt, multi pin, flush type, universal, complete all as specified and directed.
S&F switch piano flush button single pole one way 15/16 Amp, 220 Volts, complete all as specified and as directed by Engr-in-Charge.
S&F for socket outlet, 6 Pin, 15 Amp flush type, 220 Volts, complete all as specified and as directed by Engr-in-Charge.
S&F bell push, flush type 5/6 Amps, 220 volts AC,single pole, complete all as specified and directed.
S&F Call bell AC 220 Volts, single pole, ding dong sound, complete all as specified and directed.
S&F Ceiling rose, surface bakelite, 65x20 mm, three terminal, complete all as specified and directed.
S&F stepped type electronic fan regulator, flush type, 230 volts AC, single pole, humming free, fixed on the existing phenolic laminated sheet, complete all as specified and directed.
Supply and fixing LED Tube light fitting complete of 18W/20W 220 V, AC complete with all accessories and including connecting up with 3 core copper conductor cableof suitable size between ceiling rose and fitting terminal complete including taking down old light fittings all as specified and as directed by Engr-in-Charge.
S&F round shape 10 watt, 220 volts AC with high efficiency PMMA diffuser, soft glare free light complete with driver, holder, LED lamp, suitable for roof ceiling/wall including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) and complete incl taking out old one all as specified and directed by engineer-in-charge.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm, sweep with, blades, and frame and louvers, complete all as specified and directed.
S&F MCB SPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 40 Amps, complete all as specified and directed.
S&F MCB SP 240 Volts, 'C' series, breaking capacity 10 KA of rating 6-32 Amps, complete all as specified and directed.
S&F Sheet metal enclosure with socket plug top and MCBs single pole with a two pin and earth plug and socket complete with one single pole MCB of "C" series of cap 6-32 Amps including taking out the old one complete all as specified and as directed by Engr-in-Charge.
S&F sheet metal enclosures (MCB Distribution board) when MCB’s to be used single pole and neutral 8 ways 220 volt with 200 amps rated bus bar, double door with bus bar neutral link earth bar, Din rail, necessary blanking plated, including fixing DB flush in wall complete with making good disturbed surfaces and colour matching including taking down old one complete all as specified and as directed by Engr-in-Charge.
Taking down old unserviceable 125 Amps MCCB DB TPN and Supply & Fixing MCCB DB TPN 415 Volts 125 Amps rating with breaking capacity of 16 KA, fixed thermal & magnetic setting complete with making all connections, complete all as specified and directed.
S & F sub main wiring using approved colour coding (Phase-red, Neutral-black, Earth-green) complete with two single core FRLS PVC insulated and unshealthed stranded copper conductor cable 4 sqmm as current carrying conductor and one run of 4 sqmm as neutral cable, voltage rating 1100 volt, ISI marked drawn in and including concealed PVC conduit ISI marked of dia not less than 25 mm and thickness 2 mm with stranded accessories along with one run of FRLS PVC green colour insulated, unsheathed, stranded copper conductor of size 4 sqmm, complete all as specified and directed.
S & F sub main wiring using approved colour coding (Phase-red, Neutral-black, Earth-green) complete with two single core FRLS PVC insulated and unshealthed stranded copper conductor cable 6 sqmm as current carrying conductor and one run of 6 sqmm as neutral cable, voltage rating 1100 volt, ISI marked drawn in and including concealed PVC conduit ISI marked of dia not less than 25 mm and thickness 2 mm with stranded accessories along with one run of FRLS PVC green colour insulated, unsheathed, stranded copper conductor of size 6 sqmm, complete all as specified and directed. Note for sub main wiring:- Two runs of single core FRLS PVC cable with one run of earth contunity conductor and one run of pvc conduit shall be measured as one unit.
Disconnecting and taking down carefully ceiling fan/exhaust fan and refixing after cleaning, oiling/greasing and connecting with suitable size copper conductor cable, complete all as specified and directed.
M&L for painting of ceiling fans/exhaust fans of any sweep with one coat of synthetic enamel paint applied with spray machine, including filling cavities with filler after cleaning of surfaces, complete all as specified and directed.
M&L for earthing complete with galvanized steel earth plate 600x600x6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanised earth lead wire of 4 mm dia as earthing lead by means of bolts, nuts, check-nuts, and washers of galvanised iron or steel besides welding at all joints as shown in drawings and including excavation and earth work, GI pipe light grade 15 mm bore for protection of GI wire from earth electrode to test point /machinery / equipment. supplying and laying charcoal dust comman salt PCC (1:2:4) type B1 using 20 mm graded stone agregrate chamber and RCC cover 54 cm X 54cm x50 mm thick (1:2:4) type B-1 using 20 mm stone agrigrtae ) reinforced with 8 mm dia TMT bars @ 75mm C/C both ways with mild steel handle 12 mm dia, using round bar ,PGI funnel with wire mesh, 20 mm dia GI pipe medium grade for watering all as shown in electrical plate No-3 of SSR part-1 including testing and taking out the old one complete all as specified and directed Note - Cost of GI wire and GI protection pipe up to a distance 7.5 M shall be included in quated rate of above Items.
Bikarma Enterprise
M/S Harsh Traders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .