Construction of Toilet at Mashobra Bazar in ward No 21

Amount

Cutting in earth work in all kinds of soil including spade work, pick work, jumper work and blasting work and disposal of excavated earth up to all leads and lifts as directed by Engineer-in-Charge. (Disposal of earth/muck in MC dumping site at Bharyal free of cost, transportation charges will be paid extra)

Excavation in earth work in all kinds of earth work including spade work, pick work, jumper work, B/work chiseling wedging out of rock etc. up to all lifts in earth work including dressing of sides and bed and disposing of excavated earth to be leveled and neatly dressed as directed by the Engineer-in-charge. (Disposal of earth/muck in MC dumping site at Bharyal free of cost, transportation charges will be paid extra)

Providing and laying cement concrete 1:6:12 (1 cement: 6 sand: 12 graded stone aggregate 40mm nominal size) and curing complete excluding cost of centring and shuttering in Foundation and plinth

Random rubble masonry/polygonal rubble masonry (Uncoursed/ brought to courses) with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement: 6 sand; 12 graded stone aggregate 20mm nominal size) in cement mortar 1:6 (1 cement: 6 sand) in breast walls and retaining walls

Providing from work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling upto all heights and removal of the same for insitu-reinforced concrete & plain concrete work in Foundation, footings basis of columns etc. and mass concrete.

Beams, cantilever, girders and lintels. Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels not exceeding 1 Mtr. in depth in all heights from floor.

Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like.

Flat surfaces such as soffits of suspended floors, roofs, landings and the like. Floors etc.upto 200mm. In thickness. Column, pillars, posts and struts upto floor two level :

Providing and laying cement concrete work 1:1.5:3 (1 cement : 1.5 sand :3 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : Column, pillars, posts and struts upto floor two level :

Lintels, beams girders bressumers and cantilevers upto floor two level :

Providing mild steel/ Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor all level-tor steel

Half brick masonry in common burnt clay building bricks in :-Cement Mortar 1:4 (1 cement : 4 sand) First Class Bricks

15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. Cement Mortar 1:4 (1Cement:4 Sand).

Providing woodwork in frames of doors,windows, clerestory, windows and other frames wrought, framed and fixed in position. 2nd class deodar wood.

Providing 40x3 mm flat iron hold fast 40cm. Long including fixing to frame with 10mm diameter bolts & nuts and wooden plugs and embeding in cement concrete block 30x10x15cm. 1:3:6 ( 1 cement : 3 sand: 6 graded stone aggregate 20mm nominal size)

White glazed tiles 6 mm thick in flooring, treads of steps and landing laid on a bed of 12 mm thick cement mortar 1:3(1 cement :3 sand) finished with flush pointing in white cement.

White glazed tiles 6 mm thick in skirting risers of steps and dado 12 mm thick cement mortar 1:3 (1 cement :3 sand) and jointed with cement slurry.

Providing and laying cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in Foundation and plinth.

Steel work welded in built up sections,trusses and framed work,including cutting,hosting,fixing in position and applying a priming coat of red lead paint.In beams joists channels,angles,tee,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like.

Steel work welded in built up sections, trusses and framed work, including cutting , hoisting, fixing in position and applying a priming coat of red lead paint. In trusses and trussed purlins in buildings.

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge.

Providing and fixing ridges or hips 60 cm overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges.

Providing and fixing M.S. BP Sheet 1.66mm to 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely)

Providing and fixing 15 cm. wide 45 cm. overall semicircular plain G.I. sheetgutter with iron brackets 40x3mm size bolts and nuts and washers etc. including making necessary conections with rain water pipe complete as per design. 0.63mm thick sheet.

Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws. 40mm thick 2nd class deodar wood.

Providing and fixing anodized aluminum sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete.250x16mm

Providing and fixing aluminum handles anodized transparent or dyed to required colour of shade with necessary screws etc. complete 125mm

Providing and fixing aluminum tower bolts (barrel type) anodized trans parent or dyed to required shad and colour with screws etc. complete. 250x10mm

Providing and laying granite stone in flooring 20mm (average) thickness base of cement mortar 1:3 (1cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete. 20mm.thick

Kota stone slab flooring 20 mm (average) thick base of cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. Including rubbing and polishing complete. 30 mm thick.

Providing and fixing ply wood lining with butt jointing and nails (frame work and cove fillets to be measured and paid for separately) 4 mm thick

Painting two coats(excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping With enamel paint other than white

P/F PVC water storage tank 1000 LTR Capacity (for approved quality double Layer)

P/L Tank Nipple 15mm

P/F G.I/M.I union 15mm dia (for approved quality)

P/L G.I. Pipe 15mm dia (for approved quality)

P/L PVC Pipe 100mm dia (for approved quality)

P/F PVC Door bend 100mm dia

P/F PVC Plain Bend 100mm dia

P/F C.P. Brass stop cock 15mm

Providing and fixing vitreous china water closet squatting pan (Indian type W.C. pan)size 580mm (earth work, bed concrete, foot rest and trap to be measured and paid for separately) – Orrissa pattern

Providing and fixing 8 to 10 liters P.V.C low level flushing cistern with a pair of C.I or mild steel brackets complete with fitting in all respect.

P/F Viterous china bowl pattern urinal connection with waste pipe by means of white lead mixed with chopped hamp waste water pipe to be measured paid to be seprately flat back type of size 433x260x350mm

P/F Viterous China devation plate (for approved quality)

P/F C.P. Brass ball cock 15mm dia

P/F C.P. Brass Bib tap 15mm dia

P/F P.V.C pipe 32mm dia for W.C. or Sink

P/F PVC Connection pipe 45cm long (for approved quality)

P/F C.P. Brass Angle Cock 15mm dia

OM PRAKASH

HITESH KAITH