REPAIR / REPLACEMENT OF SOLAR WATER HEATER / LIGHTS WITH OTHER ALLIED AND OTHER CONNECTED WORKS UNDER AGE (I) AF MANAURI

Amount

S&F in replacement sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 4 Sqmm FRLS, 1100 Volts grade cable drawn into concealed and including rigid non metalic PVC Conduit of size not less than 25mm dia including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 4 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete all as specified & directed. Note:- (a) Two runs of 4 sqmm cable and one run of 4 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) Quoted rate shall deem to be included cost of cutting chasses in wall for concealling conduit and making good to match with existing finish. Make : Havells /Anchor /Finolex

S&F in replacement to hot water stainless steel storage tank inner tank high quality steel inner tank ensures high resistance corrosion and food grade material suitable for upto 300 Ltr per day capacity solar water heater made by aluminium section type grade ,size, be as per section -2 of IS:12933 (pt-2) /2003: the minimum thickness of aluminum channel section 1.6 MM, sheet 0.7 to 1 MM support 1.2 MM with other all tech specification complete all as specified & directed.

S&F in replacement digital controller volume control temperature control panel suitable for solar water heating capacity 300 LPD for heating element operation dry heat protection leakage low power consumption with other complete all as specified & directed.

S&F in replacement vacuum tube copper coil solar energy water heater suitable for solar water heater capacity 300 LPD (Ltr per day) in existed model/ make and technical specification complete all as specified & directed.

Supply and fixing in replacement to heater immersion water heating element suitable for solar water heater capacity upto 300 LPD 220 volt with tech specification/ make model all as per site complete all as specified & directed.

M&L for servicing cleaning soldering to leakage portion / required repairing work to solar panel / plate of solar water heater capacity upto 300 LPD in any specifications/ cap/ make/model etc chemical disclearing to all vest materials of water storage tank ,heating unit , water storage tank , inlet/ out let pipe etc all including replacement of minor spare such as indication lamp, inter connection pipe etc and cutting welding jointing to solar plate stand, mounting bolt titing / fixing properly for making functional properly included re-assembling/ fixing and re-connected as per existed etc complete all as specified & directed.

S&F in replacement of complete flat plate collector suitable for upto 300Ltr capacity., solar flat collector cover plate made of toughened glass, sheet for absorber made of copper, absorber consisting of copper sheet and copper tube and confirming to IS-12933 Part-1 with amdt no 1 & 2 and IS-12933 Part-2/2003 and various components shall be as under and complete all as specified and directed:- a) Cover plate: cover plate shall be toughened glass and thickness of 4.0 mm (min) confirming to section -1 of IS: 12933(pt-2)/2003 the solar transmittance of cover plate shall be minimum 82 percent at near normal incidence. b) Collector box: collector box shall be made of aluminium section only type grade ,size, be as per section-2 of IS:12933(pt-2)/2003 : the minimum thickness of aluminum shall be as under : 1. Channel section for sides 1.6 mm 2. Sheet for bottom 0.7 mm 3. Support for glass retaining 1.2 mm 4. Sheet for entire body 1.0 mm (c) Absorber shall consist of riser , Header and sheet for absorber the diameter of header shall be as per existing, sheet for absorber shall be made of copper only.

M&L of 3-layer PP-R (Polyproplene random copolymer) pipes 20 mm bore SDR 7.4 & SDR 11 UV stabilsed and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polyprocylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified & directed.

M&L for 3-layer PP-R (Polypropylene random copolymer) pipes 25 mm bore SDR 7.4 & SDR 11 UV stabilsed and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropelene random fittings fixed complete to walls, ceilings or in floors etc all as site required and directed.

M&L for Hoisting/connecting/fixing PVC water tank rotational moulded polyethylene water storage tank of capacity 250 ltrs (cylindrical vertical with closed top), connecting up Pipes, securing access covers etc complete all as specified & directed.

S&F PP- R Gate valves (brass insert) 25 mm bore as per requirement of the site complete all as specified & directed.

M&L for Fabricated/framework of staging for installation of PVC water tank with angle iron of size confirm to Fed 290 Gde-E-165 complete all as specified & directed.

S&F in replacement of 150 watt flood light fitting for replacing with High mast tower / pole in any lenght/ specification ,energy saving IP 65 protection ,required nut bolt washer etc including making electric connection using three core copper flexible cable drawn through in PVC flexible conduit complete all as specified and directed. Note : Quoted rate shall be included cost to take down/ up, replacing of inter connection cable etc and other required site work.

S&F in replacement LED bollard 10 watt with coverage of 360º lighting area and IP65 protection luminaire, corrosion resistant complete with all accessories including making proper base structure for fitting complete all as specified & directed. Make : Model No LBLSN-10-CDL of Crompton Greaves or equivalent in Havells/Phillips

S&F LED Post top light fitting 40 W energy saving heavy duty IP 65 protection including GI pipe light grade in suitable size grouting in brick wall to be fix light fittings using nut bolts clamps and making all electric connection using three core flexible copper cable of suitable size drawn through in flexible conduit pipe including taking down of old light fitting complete all as specified & directed.

S&F LED recessed mounted 2x2 luminaire LED 36 W light fitting with minimum 100lumen per watt energy saving low glare high power mounting on two Nos PVC round/ square block on surface of wall / beam etc incl making all electric connection using three core copper cable drawn through in PVC flexible counduit pipe from ceiling rose to fittings including taking out to unsv old fittings complete all as specified & directed.

S&F LED recessed mounted down 15 W light fitting energy saving low glare high power mounting on two Nos PVC round/ square block on surface of wall / beam etc incl making all electric connection using three core copper cable drawn through in PVC flexible counduit pipe from ceiling rose to fittings including taking out to unsv old fittings complete all as specified & directed.

S&F in replacement wall brackets lanterns in B22 brass aluminium cover cast aluminium body finished with polyurethane paint (with prior treatments)with acrylic window cover total length 393mm ,max projection breath 205mm,base provided 134mm X101mm for wall mounting complete all as specified & directed. Make-Mepro/Crompton/Havells

S&F in replacement LED CLIO wall light 15 watt withUP-DOWN Luminaire with wall surface mounting using COB LED as light sourse and IP65 protection luminaire, corrosion resistant complete with all accessories including making proper base structure for fitting complete all as specified & directed. Make-Crompton Greaves or equivalent in Havells/Phillips

Supply,erecting and fixing in replacement cast aluminium heavy duty designer leg and broader designer basenfinished with polyurethane paint (with prior treatment)diameter of one leg is approx 76mm,outer dia for spigot entry 60 mm,03 Nos "T"shaped bolt with nuts washers provided for concrete foundation,total length of the pole including base and legs (base with plate x 3 Nos legs) is 2463 mm (8 feet 1 inches) complete all as specified & directed. Note : Earth work, cement concrete will be measured and paid separetely. Make-Bajaj/ National tubing/ Mepro

Supply,erecting and fixing in replacement cast aluminium EXTRA heavy duty designer leg and broader designer basenfinished with polyurethane paint (with prior treatment)diameter of one leg is approx 88mm,outer dia for spigot entry 75 mm,03 Nos "T"shaped bolt with nuts washers provided for concrete foundation,total length of the pole including base and legs (base with plate x 4 Nos legs) is 3000 mm (9 feet 8 inches) complete all as specified & directed. Note : Earth work, cement concrete will be measured and paid separetely. Make-Bajaj/ National tubing/ Mepro

S&F in replacement cast aluminium designer pole bracket fully cast aluminium finished with polyurethane paint (with prior treatment)with square junction with max projection breath of 625 mm ,suitable for two numbers post top lanterns for 2.5 meter and 3 meter poles complete all as specified & directed. Make-Bajaj/ National tubing/ Mepro

S&F in replacement cast aluminium designer pole bracket fully cast aluminium finished with polyurethane paint (with prior treatment)with square junction with max projection breath of 1155 mm ,suitable for two numbers post top lanterns for 3 meter poles complete all as specified & directed. Make-Bajaj/ National tubing/ Mepro

S&F in replacement led post lantern 25watt fully cast aluminium body finished with polyurethane paint (with prior treatment)with acrylic window cover ,total length of fitting 558mm (22 inches)max breath of fitting 266mm,spigot entry 78mm complete all as specified & directed. Make- Bajaj/Havells/Phillips/Mepro

S&F in replacement led post lantern 40 watt fully cast aluminium body finished with polyurethane paint (with prior treatment)with acrylic window cover ,total length of fitting 752mm (30 inches)max breath of fitting 431 mm ,spigot entry 78mm ccomplete all as specified & directed. Make- Bajaj/Havells/Phillips/Mepro

Note :- (i) Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. The contract amount shall be arrived at after deduction of Schedule of Credit from the total quoted amount in BOQ. (ii) Make of material shall be as per mentioned in Particular specifications or Appendix 'B' to Particular specifications as approved by AGE (I) AF manauri if not specified in BOQ

M/S SHIV BALLABH MISHRA (BID ID -3085018)

Bharat Trading Company (BID ID -3081162)

gangotri enteriprises (BID ID -3086117)

Ambrish Builders (BID ID -3090142)

AMRESH TRADERS (BID ID -3082958)

M/S SATISH KUMAR (BID ID -3089282)

bharat construction (BID ID -3089356)