Upgardation of Health Club at Jammu Tawi Golf Course Sidhra.

Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 (1 cement : 4 fine sand)

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge: 1:3:6 or richer mix (i/c equivalent design mix)

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown

Providing and Laying SPC Tiles in different size, design approved by authorities of Golf Course.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand)

12mm Cement plaster finished with a floating coat of neat cement of mix: 1 : 4 ( 1 cement : 4 fine sand)

Providing and fixing false ceiling at all height including providing and Providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm widex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dashfastener 12.5 mm dia x40mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length with nuts & bolts of required size and other end of angle hanger fixed with G.l. channels 45x15x0.9 mm running at the spacing of 1200 centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having dips of 10.5 mm at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diaX230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre, with 25mm long drive-all screws @ 230mm interval including fixing of INNOVATIVE CEILING SYSTEM INFRATOP 100% WATER PROOF to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of COMPLETE JOB

Providing and fixing Wood based panels with lineal perforations to be fixed on walls. The panels shall be with melamine laminate finish of size 2430mm x 128mm x17mm with 2mm slats at 32mm pitch, Tongue and Groove edges for seamless mounting having density of 800kg/m3. The back of the panels are perforated with 10mm diamete circular holes with a nonwoven fabric covering of 0.2mmr for providing Sound absorption via the acoustic impedance method.Panel is to be fixed on Gi framework as recommended by the manufacturer with screw fixed horizontal / vertical to wall at every 600mm c/c in tongue & groove system on Gi Itramework. The cavity of framework should be inserted with 50mm thick, 1000GSM thermally bonded polyester adding sunnorted from back with chicken wire mesh. Approved Make : VOX or equivalent.(LM.R)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class teak wood

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured

Extra for providing vision panel not exceeding 0.1 sqm in all types of flush doors (Cost of glass excluded) (overall area of door shutter to be measured) Rectangular or square

Providing and fixing decorative high pressure laminated sheet of plain/wood grain in gloss/matt/suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Type S including cost of adhesive of approved quality1mm thick

Providing and fixing aluminum die cast body tubular type universal hydraulic door closer (having brand logo with IS: 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete :

Providing and fixing bright finished brass 100mm mortice latch and lock, iSi marked, with six levers and a palr of anodized (anodic coating not less than grade AC 10 as per IS: 1868) aluminum lever handles of approved quality with necessary screws etc. complete. HEAVY DUTY MORTISE DOOR LOCK

Providing and fixing sliding door bolts, ISi marked anodised (anodic coating not less than grade AC 10 as per IS : 1368), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm

Providing and fixing tower bolts, iSl marked, anodised (anodic coating not less than grade AC 10 as per iS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 300x10 mm

Providing and fixing tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per 15 : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete: 200x106 mm

Providing and fixing handles ISi marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 125 mm

Providing and fixing MAGNETIC CATCH STOPPER floor door stopper, ISi marked, a transparent or dyed to required calcur or shade with necessary screws etc. complete: MAGNETIC CATCH STOPPER

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern ofcapacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts 18.81and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions ofEngineer-in-Charge.

Providing & fixing white vitreous china water less urinal of size 500 x 330 x 315mm having antibacterial /germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal

Providing and fixing 600x120xSmm glass shelf with edges round off supported on anodized aluminum angle frame with CP. brass brackets and guard rail complete fixed with 40mm long screws, rawl plugs, etc.

Providing and fixing toilet paper holder C.P. brass

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour:

Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings. wash basin of size AND TYPEONE PIECE WASH BASIN TOPS SIZE 380 X380 MM DEPTH B45MM AVG

Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.

Providing and fixing 15mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.Indian / JaquarMake/JAL BRAND /EQUALANT MAKE

Providing and fixingSpecule Cubix Series Pure Brass Concealed Diverter | Full Set with 8x8 Inch Overhead Shower | Wall-Mounted Hand Shower & BathTub Spout | Premium Chrome Finish Bathroom Shower System COMPLETE JOB in all respect as per directions of Engineer-in-Charge.

Providing and fixing 12mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot &double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle,

Shower

Carpanter

Helper

Carriage of material by M.T including loading unloading and stacking at site complete

Sand for an av. Lead 15.00 Km.

Stone agg. Above 20mm for an av. Lead 10.00 Km.

Bricks for an av. Lead 10.00 Km.

Electrical Works Wiring for light point/ fan point/exhaust fan point/ call bell point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surfacel recessed PVC conduit, with modular switch, modular plate, suitable Gi box earthing the point with 1.5 sq. mm FRLS PVC insulated coppor conductor singie core cable etc as required (Group-A)

Supplying and fixing suitable size Gi box with modular plate and cover in front on surface of in recess including providing and fixing 6 pin 5/6 amps & 15/16 amps, modutar sockot outlet and 15/16 amps modular switch connection etc. as required.

Wiring for circuit/ sub-main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surfacel recessed PVC conduit as required

2 x 2.5 sq mm + 1 x 2.5 sq. mm earth wire

2 x 4 sq. mm + 1 x 4 sq. mm earth wire

2 x 10 sq. mm + 1 x 6 sq. mm earth wire

Supplying and fixing of 400mm sweep wall mounting fan (oscillating type) on wall with necessary connection as required.

Supplying and fixing of following sizes exhaust fan with PVC blade & Lovers complete set on existing holes on wall! with necessary connection from ceiling rose to fan using 2 core flexible copper wire.

Supplying and fixing of Following light fitting with lamps on ceiling/ wall with necessary connection from ceiling rose to fitting by twin core flexible copper wire.Mirror light LED ftting with 9/11W LED lamp

Providing & Fixing of IP-20 LED Recessed / Surface Mounted, Round / Sqaure SM Mid Power LED Downlight with power coated die-cast aluminum housing with UV Stabilized non yellowish Diffuser with BIS complience 2.5 KV surge protected Isolated driver, with Short & Open circuit protection, having efficiency > 85%. System Lumen efficacy of 2 110 im / walt, THD < 10%, P1.20.95, CRI >80, life time of minimum 50000 Burning Hours with, 70% of intial Lumen maintaned till life ends, CCT 3000°K / 4000°K/ 5700°K /6000°K/6500°K (As per ANSI Bin), maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate (T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shail be submitted. All as per approved by Engineer in charge 5/6 watt.

Supplying and fixing following sizel modules, Gi box alongwith modular base & cover plate for modular switches in recess etc as required

1 or 2 Module (75mm x 75mm)

3 Module (100mm x 75mm)

6 Module (200mm x 75mm)

12 Module ( 200mm x 150mm)

Suplying and fixing following modular switch/ socket on the existing modular plate & switch box Inculding connection but excluding modular plate etc. as required

5/6 amps switch

15/16 amp switch

3 pin 5/6 amp socket outlet

6 pin 15/16 amp socket outlet

Supply, testing, fixing and commissioning of Horizontal storage gyser 3 star 25 litre

Supply, testing, fixing and commissioning PVC based ip 65 sw/metre led type cove light input 220-240, 50 HZ waranty 2 year.

Providing and Fixing of COVE Light Driver ip 65 waranty 2 year.

Supply, Laying and fixxing of speakers lime 2-core, 2.6 sq mm High speaker cablr pvc insulated in pvc

Shifting of existing sounfd system including ampilifier etc complete job.

Supply, testing, fixing and commissioning of5 amp 2909 IP20 dimmer (- R) wth aparacive power supply AC 220-24CV EC/ED iz Cutput pow: 150%(220V input), Dimmer Ranga 30m outdoor 25m indoor

Supply, testing, fixing and commissioning of Self powered (No Battery) UP 87 Smart Switch provides wiress, sell-powerad contros with 3 xays, making it laen for smart home automerton. With a range of up to 80m cutdoors and 25m Indoors, 's dasigned to last avar 100,000 uaas. (compartaste with dimmer)

Supply, testing, fixing and commissioning of 12w Dimmable Deep RecessedThin Trim COB LED Downlight Warm White 3000k Delivers 1000-12000 lumens of energy.

Supplying and fixing of wooden like ver