Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹1.9 LAdmitted-Finance | -10.00% | ₹1.9 L | L1 | Admitted-Finance |
| 2 | L2₹2.1 L+₹10,595.32 (5.44%)Admitted-Finance | -5.10% | ₹2.1 L+₹10,595.32 (5.44%) | L2 | Admitted-Finance |
Tender Value
₹2.2 L
EMD Value
₹4,320
Closing Date
17 Aug 2026, 6:00 pmClosed
EXECUTIVE ENGINEER UIT BHILWARA
EXECUTIVE ENGINEER UIT BHILWARA
Work on shifting the transformer located in the middle of the main road near Sharda Crossing.
2026_UITBH_584652_4
NIT-12/2026-27 UIT BHILWARA
Open Tender
Electrical Works
Percentage
90 days
BHILWARA
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
Secretary UIT, Bhilwara/MD RISL Jaipur
₹4,320
Yes
17 Sept 2026
10 Aug 2026
18 Aug 2026
10 Aug 2026
17 Aug 2026
10 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply and erection of P.C.C. pole as per REC manual no 15/1979 (ammended upto date) and as per latest Discom specifications with factor of safety 2.5 including excavation of pit upto pole planting depth 1/6th of pole length. and back filling with stone aggregate/boulders and soil by ramming and watering etc complete as required.9.0 Mtr long PCC pole of 200 Kg Working Load | 2 | Each | 5,037 | ₹10,074 |
| 2 | Supply and erection of GI stay set confirming to pattern-1 of BS:16/1974 and as per latest Discom Specifications complete with stay rod with anchor plate fitted with cast iron cross head and steel bow, in cement concrete 1:3:6 including excavation of pit-re-filling etc complete as required.Stay set of dia 20mm, 2.4m long stay rod and anchor plate 380 x 380 x 4.0 mm | 2 | Each | 1,358 | ₹2,716 |
| 3 | Supply and fixing of following LT Supporting accessories with nut bolt & Clamps made out as per standard Discom's specifications with two coats of Red oxide and two coats of Aluminium paint etc. as required. LT cross arm 600 mm long with clamp | 4 | Each | 460 | ₹1,840 |
| 4 | Supply and fixing of following LT Supporting accessories with nut bolt & Clamps made out as per standard Discom's specifications with two coats of Red oxide and two coats of Aluminium paint etc. as required. LT cross arm 1200 mm long with clamp | 4 | Each | 787 | ₹3,148 |
| 5 | Supply and fixing of LT porcelain shackle insulator as per IS:1443 1979 and as per Discom's standard specifications, suitable for working voltage 1100 volts including all accessories like GI Hardware fittings confirming to IS:7935/1975 (latest amended) Nut, Bolt etc. as required. 100mm x 110mm | 20 | Each | 119 | ₹2,380 |
| 6 | Supplying and drawing Aluminium conductor steel reinforced (ACSR) ISI marked(IS 398 part II-1996) on existing cross arms through insulator with all necessary T&P required including binding and twisting etc. 50 Sqmm of (6+1) 3.35 mm (Rabbit) | 100 | Mtr. | 60 | ₹6,000 |
| 7 | Supply and fixing of 'V' type cross arms with top hamper and clamps as per latest Discom specifications made of MS angle on the existing poles complete including all necessary nut and bolt, clamps with two coats of Red oxide and two coats of Aluminium paint etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of product / work refer Annexure 'A' attached with this BSR | 2 | Each | 1,417 | ₹2,834 |
| 8 | Supply and fixing of top hamper on the existing pole as per latest Discom specifications complete including nut bolts with two coats of Red oxide and two coats of Aluminium paint etc as required. Vertical type 11 kV (.7m long) (65 x 65 x6mm angle) | 2 | Each | 275 | ₹550 |
| 9 | Supply and fixing of 11 kV pin insulator confirming to IS:731:1971 with latest ammendment on existing bracket including all accessories like MS forged hot dipped GI Pin confirming to IS 2486(Part-I)/1993 & IS:2486 (Part-II)/1989 with latest amendment, and as per latest Discom specs. etc. as required. | 9 | Each | 175 | ₹1,575 |
| 10 | Supply and fixing of 11kV Disc insulator and Hot dipped galvanized Hardware confirming to IS:731:1971 with latest ammendment and as per latest Discom Specs. on existing bracket including all accessories etc. as required. T & C type hardware 45 KN | 6 | Each | 204 | ₹1,224 |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 1.43 MB
Tendernotice_2.pdf
PDF • 0.23 MB
Tendernotice_3.pdf
PDF • 3.92 MB
Tendernotice_4.pdf
PDF • 0.92 MB
Tendernotice_5.pdf
PDF • 0.13 MB
Tendernotice_6.pdf
PDF • 0.72 MB
BOQ_1038604.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .