Construction of burnt oil pit, rail track and allied civil works at 220 kv s/s Sahnewal

Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation

Dismantling Concrete 1:4:8 or 1:5:10

Dismantling Concrete 1:2:4

Dismantling RCC

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)

Centring and shuttering for faces of walls, partitions, retaining walls and the like (vertical or battering) including attached pillasters, buttersses etc when curved.

Centering and shuttering for flat surfaces

Cement Concrete 1:8:16 with stone ballast 40mm gauge stone aggregates using concrete mixer volumetric type

Cement Concrete 1:6:12 with stone ballast 40mm gauge stone aggregates using concrete mixer volumetric type

Cement Concrete 1:4:8 with stone ballast 40mm gauge stone aggregates using concrete mixer volumetric type

Cement Concrete 1:2:4 with stone ballast or shingle using concrete mixer volumetric type

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth

Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure

Laying of Dry Stone Ballast 40mm gauge for flooring

P&F MS rail weghing 44.64 kg or 90 lbs/ mtr

Wrought iron and mild steel ladders, gratings

Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe 500 grade as per IS 1786-1985, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. 110mm o/d PVC pipe of 4 Kgf. / sqcm

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. 200mm o/d PVC pipe of 4 Kgf. / sqcm

Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) BClass, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in tr enches in the ground complete. 40 mm i/d pipe

Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) BClass, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in tr enches in the ground complete. 50 mm i/d pipe

Providing and fixing RCC manhole covers only 455 x 610 mm rectangular RCC man hole cover only as per ISI: Heavy duty

P&F in positon SWR UPVC special for soil waste vent or antisyphonage pipes for 110 mm o/d pipes Vent Cowl

Supply and erection of PVC insulated PVC sheathed (3 core) round flexible wire with copper conductor (FR) cable(ISI marked) confirm to IS:694/1990 left bare in pipe or casing of suitablesize complete in all respect as desired by the Engineer-in-charge:-- Overall size 2.5sq.mm (3 core)

Heavy gauge PVC conduit pipe 25mm dia

MCB Triple Pole 40amp. (10kA, Curve-C)

Supplying and fixing of double door distribution board SP&N Double Door Distribution Board 4 way each

Supply and fixing of Non Clog Pump of 3 BHP 3 Phase of cromton make

P&F Base Plates

P&F MS cleats

P&F 12.5 x 300mm long anchor bolts

P&F MS angle nozing 50x50x6mm

Disposal of surplus earth/debris

Recovery of steel scrap

Landing Rates of Cement

Landing Rates of Steel

Landing Rates of Fine sand

Landing Rates of C Aggregate 13.2/12

Landing Rates of C Aggregate 11.2/10

Landing Rates of C.Sand

Landing Rates of Stone Metal 40mm

Structural steel