Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.8 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹24.6 L+₹1.2 L (5.19%)Rejected-Finance | L2 | Rejected-Finance Quoted other than lowest rate. | |
| 3 | L3₹29.4 L+₹6.0 L (25.5%)Rejected-Finance 220 GANPATI ENCLAVE DABWALI ROAD BATHINDA 151001 | BATHINDA | PUNJAB | 151001 | L3 | Rejected-Finance Quoted other than lowest rate. | |
| 4 | L4₹33.9 L+₹10.5 L (44.8%)Rejected-Finance HOUSE NO 8 589 BEHIND PHC HOSPITAL OLD BUS STAND KORBA KORBA CHHATTISGARH 495678 | 495678 | L4 | Rejected-Finance Quoted other than lowest rate. | |
| 5 | L5₹36.1 L+₹12.7 L (54.4%)Rejected-Finance | L5 | Rejected-Finance Quoted other than lowest rate. |
Tender Value
₹49.9 L
EMD Value
₹99,800
Closing Date
19 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SH ASHOK KUMAR, EE, IDSE
GE NORTH BATHINDA Pin-151004
DOOR TO DOOR MAINT ( AREA UNDER AGE BR V) AND REPAIR/CLEANING OF SEWAGE LINE IN MD ACCN UNDER AGE BR V OF GE (N) BATHINDA AT BATHINDA MIL STN
2023_MES_604839_1
8938/NIT-25/23-24
Open Tender
Civil Works
Item Rate
330 days
BATHINDA
Class D Category a(i) (ii)
8 documents required · 8 mandatory
₹500
GE NORTH BATHINDA
₹99,800
Yes
18 Aug 2023
21 Jun 2023
21 Jul 2023
21 Jun 2023
19 Jul 2023
6 Jul 2023
21 Jun 2023 - 27 Jun 2023
Amount
SCHEDULE 'A' B/R Works
Supply only cement OPC grade 43 or PPC in bag of 50 kg each.
Supply only fine aggregate (sand)
Supply only 75mm long butt hinge mild steel medium weight cold rolled.
Supply only 100mm long butt hinge mild steel medium weight cold rolled.
Supply only 150mm mild steel pressed handle oval type stove enamelled black
Supply only 150mm Extruded aluminium alloy handles, fabricated type, anodised
Supply only 200mm long mild steel barrel tower bolt stove enamelled black with bright bolt.
Supply only 150mm long PTMT tower bolts
Supply only 100mm long PTMT butt hinge
Supply only 250mm long mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 Nos bolts and nuts with washers, four for bolt plate and two for staple plate.
Supply only 150mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring
Supply only aluminium (Die cast) body door closer hydraulically regulated, designation No 3, universal type suitable for door shutter of 851 to 1000mm in width and weight between 61 to 80 Kg, ISI marked
Supply only Nail wire tinned tack MS Blue of size 15mm long
Supply only Nail wire GI of size 14 No 25mm long
Supply only Nail wire GI of size 14 No 35-40mm long
Supply only Nail wire GI of size 14 No 50mm long
Supply only self drill screws (Packet of 100 Nos)
Supply only 4mm thick sheet glass frosted /Figured/pinhead type
Supply only 4mm thick sheet glass ordinary quality
Supply only oil putty ready mix (for fixing glass pane)
Supply only continuous (piano) hinges, width of flaps 30mm, mild steel, bright finish or electro- galvanised
Supply only galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm
Supply only mild steel 300mm long rat tail rod pattern spring including roller and roller plate
Supply only Beads, straight (any size and any type) of 2nd class hardwood for glazed or gauzed joinery, including mitred and removing old beads etc.
Supply only curtain rod, stainless steel chromium plated with fixing brackets, stops, roller etc.
Supply ony Mild Steel screw 30 mm long full threading (each Pkt of 100 Nos)
Supply ony Mild Steel screw 35-40 mm long full threading (each Pkt of 100 Nos)
Supply ony Mild Steel screw 50 mm long full threading (each Pkt of 100 Nos)
Supply only galvanized steel tubing (GI pipe) medium grade 15mm bore ISI marked
Supply only galvanized steel tubing (GI pipe) medium grade 20mm bore ISI marked
Supply only galvanized steel tubing (GI pipe) medium grade 25mm bore ISI marked
Supply only 15 mm bib tap cast copper alloy, chromium plated fancy type, long body with crutch or butterfly handle with capstan head, screwed down, screwed for iron pipe or for brass ferrule. Note :- The minimum weight shall be as given in SSR or in relevant IS.
Supply only 15 mm stop valve/Angle valve cast copper alloy, chromium plated. fancy type, screwed down high pressure with crutch or butterfly handle, screwed both ends suitable for iron pipe. Note :- The minimum weight shall be as given in SSR or in relevant IS.
Supply only 15 mm pillar tap brass cast copper alloy with capstan head, chromium plated, fancy type, high pressure with or without letter 'Hot' or 'Cold' with long shank and fly nuts screwed for iron pipe or for brass ferrule. Note :- The minimum weight of tap shall be as given in SSR or in relevant IS.
Supply only 15 mm bib tap cast copper alloy with crutch or butterfly handle with capstan head, screwed down, screwed for iron pipe or for brass ferrule. Note :- The minimum weight shall be as given in SSR or in relevant IS.
Supply only CP Bottle trap of PTMT having minimum water seal of 25mm and discharge pipe 32mm bore Note :- The minimum weight of trap shall be 260gm.
Supply only brass cromium plated shower rose with arm 125mm size, with or without swivel joints suitable for 15mm bore iron pipe
Supply only Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device
Supply only stainless steel sink with drainage board overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm, made out of 1.00mm thick sheet , kitchen or laboratory with plugs, washers, waste pipe including cast iron cantilever brackets and connecting union to waste pipe
Supply only Waste coupling of SS (half or full threaded) 32mm bore dia of discharge pipe for WHB/SINK.
Supply only 15 mm bib tap standard of PTMT any colour high pressure, screwed down, screwed for iron pipe or for brass ferrule. Note :- The minimum weight shall be as given in SSR or in relevant IS.
Supply only ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball (polythene float) complete, screwed suitable for 20mm bore iron pipe Note :- The minimum weight of ball valve shall be as given in SSR or in relevant IS.
Supply only ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball (polythene float) complete, screwed suitable for 25mm bore iron pipe Note :- The minimum weight of ball valve shall be as given in SSR or in relevant IS.
Supply only mixer valve brass chromium plated, two in one, mixer for mixing hot & cold water suitable for WHB or to wall, screwed for iron pipe or for brass ferrule 15mm bore Note :- The minimum weight of tap shall be as given in SSR or in relevant IS
Supply and fixing in replacement vitreous china wash hand basin white colour, flat back of size 550mm x 400mm including waste coupling and waste pipe 32mm dia SS CP and including fixing with angle iron brackets or with long screws and plug as per existing and including cement mortar work for making good disturbed surface complete all as specified and as directed by Engineer-in-charge.
Supply only 10 litres capacity PVC valve less syphonic action type low level flushing cistern of any type (Dual / Single assembly) white with inlet, ball valve, float, handle including bracket, PVC flush pipe, PVC plug and Screws
Supply only Glass shelf (corner type) fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 300 Gms), fancy type brackets complete all as directed by Engineer-in-charge.
Supply only jumper washer (brass) complete with black/white rubber seal (heavy duty suitable for hot or cold water) for any type of 15/20mm bib cock/Stop cock/stop valve etc.
Supply only HDPE plastic Lid (cover) for water tank of 500 Ltr capacity with thread type or lock type
Supply only grating round MS chromium plated of size 125mm round with/without hole
Supply only PVC waste pipe 32mm dia
Supply only full turn/half turn, spindle brass with washer suitable for bib tap/stop cock/pillar cock 15mm bore (any type 1 o 6 No)
Supply only CP extension/GI extension of 15mm x 25mm
Supply only M-Seal
Supply only mild steel chromium plated jet spray suitable for EWC including necessary nut bolts and 01 mtr long flexible CP pipe with connector
Supply only health faucet suitable for EWC including necessary nut bolts and 01 metre long flexible CP pipe with connector
Supply only PVC internal kit/fitting for low level flushing cistern of any type (Dual/ Single assembly) with inlet, ball valve, float and handle complete.
Supply only 450 mm long PVC connection suitable for 15mm nipple with brass nut and PVC washer
Supply only 600 mm long PVC connection suitable for 15mm nipple with brass nut and PVC washer
Supply only plug CI suitable for 15mm bore socket or nipple
Supply only plug CI suitable for 20mm bore socket or nipple
Supply only plug CI suitable for 25mm bore socket or nipple
Supply only GI Union socket size 15 mm bore medium grade ISI Marked
Supply only GI Union socket size 20 mm bore medium grade ISI Marked
Supply only GI connection nipple (for inlet/outlet connection of water tank) 20mm bore including two washer and checknuts (ISI Marked)
Supply only Elbow GI, size 15 mm bore , medium grade ISI Marked
Supply only Elbow GI, size 20 mm bore , medium grade ISI Marked
Supply only Elbow reducing GI size 20X15 mm medium grade, ISI marked
Supply only Elbow reducing GI size 25X20 mm medium grade, ISI marked
Supply only Socket reducing GI size 20X15 mm medium grade, ISI marked
Supply only Socket reducing GI size 25X20 mm medium grade, ISI marked
Supply only Socket GI size 15 mm medium grade, ISI marked
Supply only Socket GI size 20 mm medium grade, ISI marked
Supply only Tee reducing GI size 20x15 mm medium grade, ISI marked
Supply only Tee equal GI size 15 mm medium grade, ISI marked
Supply only Nipple GI size 15mm bore, 50 mm long medium grade ISI marked
Supply only Nipple GI size 15mm bore, 75 mm long medium grade ISI marked
Supply only Nipple GI size 15mm bore, 100 mm long medium grade ISI marked
Supply only Nipple GI size 15mm bore, 150 mm long medium grade ISI marked
Supply only Nipple GI size 15mm bore, 200 mm long medium grade ISI marked
Supply only Nipple GI size 15mm bore, 250 mm long medium grade ISI marked
Supply only Nipple GI size 20mm bore, 50 mm long medium grade ISI marked
Supply only Nipple GI size 20mm bore, 75 mm long medium grade ISI marked
Supply only Nipple GI size 20mm bore, 100 mm long medium grade ISI marked
Supply only Nipple GI size 20mm bore, 150 mm long medium grade ISI marked
Supply only Nipple GI size 20mm bore, 200 mm long medium grade ISI marked
Supply only Nipple GI size 20mm bore, 250 mm long medium grade ISI marked
Supply only cotton thread suitable for used in plumbing fittings as water tight seal on threaded pipe joints (each Pkt of 500 grams)
Supply only PVC (KITEC) Tee 3 straight coupler compression 16mm x 20mm, PVC compression pipe of dia 16/20mm
Supply only PVC (KITEC) Tee 3 side coupler composite compression 20mm x 20mm, PVC compression pipe of dia 20/25mm
Supply only PVC (KITEC) elbow one side coupler and one side thread composite compression 16mm x 20mm, PVC compression pipe of dia 16/20mm
Supply only PVC (KITEC) Tee 2 side coupler and one side thread compression 16mm x 20mm, PVC compression pipe of dia 16/20mm
Supply only PVC (KITEC) elbow both side compression coupler 16mm x 20mm, PVC compression pipe of dia 16/20mm
Supply only white cement ( 1 kg each pack)
Supply only liquid cold mix bitumen emulsion (20 kg each drum) for roof treatment all as specified and as directed by Engineer-in-charge.
Repairs to existing steel members, butt hinges/single action spring hinges/ double action spring hinges/projecting type hinges/box type hinges/all other small steel article, existing door frame/mild steel window frame, repair to steel gates/ door of garrage etc (metal to be welded) by welding at site in any position not exceeding 6mm in thickness and not exceeding 2.5cm in length of welded members at site in any position complete all as specified and as directed by Engineer-in-charge.
Fixing only in repair 75mm/100mm long, medium weight, cold rolled, mild steel butt hinges, complete all as specified and as directed by Engineer-in-charge.
Fixing only in repair 150mm, mild steel pressed handle, oval type, stove enamelled black, complete all as specified and as directed by Engineer-in-charge.
Fixing only in repair 200mm long mild steel barrel tower bolt, stove enamelled black with bright bolt, complete all as specified and as directed by Engineer-in-charge.
Fixing only in repair mild steel sliding door bolts 250mm long, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts washers, four on bolt plate and two on staple plate complete all as specified & directed by Engineer-in- charge.
Fixing only in repair 150mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, complete all as specified and directed by Engineer-in-Charge.
Fixing only in repair galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tack or galvanised wire staples including taking out old broken wire cloth any size complete all as specified & directed by Engineer-in- charge.
Fixing only in repair sheet glass 4mm thick ordinary quality/frosted in squares/rectangulars not exceeding 0.5sqm in each pane for any type of doors/wondows/ventilators complete all as specified and as directed by Engineer-in-charge. Note :- Cost for cutting of glass as per site requirement shall be included in the unit rate, cutting schedule shall be follow as per direction of Engineer-in-charge/JE
Fixing only in repair sheet glass 4mm thick, frosted in squares/rectangulars exceeding 0.5sqm in each pane for any type of doors/wondows/ventilators complete all as specified and as directed by Engineer-in-charge. Note :- Cost for cutting of glass as per site requirement shall be included in the unit rate, cutting schedule shall be follow as per direction of Engineer-in-charge/JE
Fixing only in repair 10 litres capacity low level flushing cistern complete with inlet, ball valve, float, handle, flush pipe of PVC 32mm dia., cistern fixing with PVC plug and Screws complete all as specified and as directed by Engineer-in-charge.
Fixing only in repair 125mm shower rose with arm any type and size, fixed to iron pipe or union complete all as specified and as directed by Engineer-in-charge.
Fixing only in repair pillar tap cast copper alloy with capstan head, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shank and fly nuts screwed for iron pipe or for brass ferrule 15mm bore complete, all as specified & directed by Engineer-in-charge.
Fixing only in repair bib tap cast copper alloy, with crutch or butterfly handle with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified & directed by Engineer-in-charge.
Fixing only in repair mixer valve of any type for mixing hot & cold water screwed down for iron pipe, fixed to WHB/Sink/to wall or as directed in any position complete all as specified and as directed by Engineer-in-charge.
Fixing only in repair stainless steel sink made out of 1.00mm thick sheet, kitchen or laboratory with plugs, washers, waste pipe including bedding in cement mortar to dwarf wall or fixing with cast iron cantilever brackets and connecting union to waste pipe any size complete all as specified and directed by Engineer-in-Charge. Note : (i) Material against BOQ Srl item No. 96 to 109 above shall be issued under Sch 'B' free for fixing only.
Material and labour for Cleaning/removal of blockage from bathroom, kitchen, WHB and urinals including connected Nahani traps / gully traps/floor traps, grating of trap, waste pipes, pipe in any length upto Ist manhole etc., choked with mud / other accumulated sludge and getting out, washing thoroughly at any location, at any floor by rodding/choke remover/Pressure technique/manually or otherwise to clear blockage upto entire satisfaction of users, including refixing of oval assess door covers with new nuts & washers and refixing manhole covers, including removing of all wastes, solid or liquid sludge and depositing the sludge in a pit (at empty/open area) of suitable size at a distance exceeding 50 metres from the building where directed and covering the same with the soil obtained from excavation of pit after treating the sludge by spreading the bleaching powder as directed to reduce the foul gases including all excavations and earthwork complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Cleaning/removal of blockage from EWC/IWC (any type) including connected traps (any type), pipe in any length upto Ist manhole etc., choked with mud / other accumulated sludge and getting out, washing thoroughly at any location, at any floor by rodding/choke remover/Pressure technique/manually or otherwise to clear blockage upto entire satisfaction of users, including refixing of oval assess door covers with new nuts & washers and refixing manhole covers, including removing of all wastes, solid or liquid sludge and depositing the sludge in a pit (at empty/open area) of suitable size at a distance exceeding 50 metres from the building where directed and covering the same with the soil obtained from excavation of pit after treating the sludge by spreading the bleaching powder as directed to reduce the foul gases including all excavations and earthwork complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Cleaning of existing sewage system/pipe line 100/150/200mm dia (length of pipe line manhole to manhole not exceeding 10mtr) including cleaning of manholes (any type rectangular / square / circular) located in different situations/sites, taking off the manhole cover (CI or RCC) and placing in the same original position after getting out liquid/sludge/solid contents from the manholes/sewage line and complete perfect function/running/flowing condition without any obstruction by removing all blockage in system with manual labour (rodding manually) or by mechanically sewage suction pump (at contractor;s discretion as required at site) making it fully functional to the entire satisfaction of Engineer-in-charge including removing of all wastes, solid or liquid sludge through closed container and depositing the sludge in a pit (at empty/open area) of suitable size at any distance upto 200 metres from the line/colony area where directed and covering the same with the soil obtained from excavation of pit after treating the sludge by spreading the bleaching powder as directed to reduce the foul gases including all excavations and earthwork complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Cleaning of existing sewage system/pipe line 100/150/200mm dia (length of pipe line manhole to manhole exceeding 10 mtr but not exceeding 20 mtr) including cleaning of manholes (any type rectangular/square/circular) located in different situations/sites, taking off the manhole cover (CI or RCC) and placing in the same original position after getting out liquid/sludge/solid contents from the manholes/sewage line and complete perfect function/running/flowing condition without any obstruction by removing all blockage in system with manual labour (rodding manually) or by mechanically sewage suction pump (at contractor;s discretion as required at site) making it fully functional to the entire satisfaction of Engineer-in-charge including removing of all wastes, solid or liquid sludge through closed container and depositing the sludge in a pit (at empty/open area) of suitable size at any distance upto 200 metres from the line/colony area where directed and covering the same with the soil obtained from excavation of pit after treating the sludge by spreading the bleaching powder as directed to reduce the foul gases including all excavations and earthwork complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Cleaning of existing sewage system/pipe line 250/300mm dia (length of pipe line manhole to manhole exceeding 10 mtr but not exceeding 20 mtr) including cleaning of manholes (any type rectangular/square/circular) located in different situations/sites, taking off the manhole cover (CI or RCC) and placing in the same original position after getting out liquid/sludge/solid contents from the manholes/sewage line and complete perfect function/running/flowing condition without any obstruction by removing all blockage in system with manual labour (rodding manually) or by mechanically sewage suction pump (at contractor;s discretion as required at site) making it fully functional to the entire satisfaction of Engineer-in-charge including removing of all wastes, solid or liquid sludge through closed container and depositing the sludge in a pit (at empty/open area) of suitable size at any distance upto 200 metres from the line/colony area where directed and covering the same with the soil obtained from excavation of pit after treating the sludge by spreading the bleaching powder as directed to reduce the foul gases including all excavations and earthwork complete all as specified and as directed by Engineer-in-Charge.
Note for item No 112 to 116 (i) Contractor must employ Minimum Six nos labourer's daily i.e. for Jogender Singh Enclave -02 No, Himgiri - 02 No, Gurnam Singh Enclave & DAD colony - 02 No. (ii) Contractor or his representative shall report daily at 09.00 AM except on Sunday/ National holidays in the office of Engineer-in-Charge/ Complaint cell to receive complaint slip and necessary directions. Complaints received through telephonic message from JE/ Engineer-in-Charge shall also be attended on the same day and the completion of work shall be reported by 05.00 PM of every working day to JE/ Engineer-in-Charge. (iii) In case of non attaedence of complaints against BOQ item 112 & 113 by the contractor on the same day, a penalty of Rs 200/- per complaint per day and for complaints against BOQ item 114 to 116, a penalty of Rs 100/- per complaint per day will be recovered from the contractor due. (iv) The cost for all necessary T&P such as green female bamboo strips, iron rods, sewage rodding machine, buckets, rope, ladder, safety mask, bleaching powder etc. and all other other materials for execution of the work shall be included in the unit rate.
Removing the manhole cover (CI or RCC) for opening of septic tank or sewage wells (any type rectangular or circular) of any size and any capacity in foul condition and bailing out of mudy water, taking out semi solid sludge/solid contents/night soil from tank by manually or mechanically by sewage suction pump (at contractor's discretion) making it fully functional and cleaning the internal surfaces with water to the entire satisfaction of Engineer-in-Charge including all necessary tools and plants required for removal of all wastes, solid or liquid sludge from the site through closed container and depositing the sludge in a pit (at empty/open area) of suitable size at any distance upto 200 metres from the line/colony area where directed and covering the same with the soil obtained from excavation of pit after treating the sludge by spreading the bleaching powder as directed to reduce the foul gases including all excavations and earthwork and refixing the manhole cover to its original position complete all as specified and as directed by Engineer-in-Charge. Note:- (i) All the tools and plants including mechanical pump, closed lorry and other allied arrangements for making septic tank clean and functional will be made available by the contractor without any extra cost to the Govt. (ii) The mode of measurement shall be considered 25% of the actual volume of septic tank/ manholes (contains human excreta and water). Cost for the dewatering/bailing out of mudy water shall be including in the unit rate(i.e. qty of solid sludge contents) nothing extra shall be paid on this account.
Excavation in trenches in soft / loose soil not exceeding 1.5 metre wide & not exceeding 1.5 metre in depth for foundations of manholes, sewerage pipe lines etc including getting out complete all as specified and as directed by Engineer-in-Charge .
Demolition and breaking up drain pipes SGSW, AC or reinforced concrete pipe upto and including 150 mm bore pipes, complete all as specified and directed by Engineer-in-Charge.
Material & labour for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate to drain pipe including packing under & hunching against the sides of pipe 150 mm dia ( internal) after they are laid and tested in trenches, complete all as specified and directed by Engineer-in-Charge.
Material & labour for 150 mm dia ( internal) SGSW pipes grade ‘A’ laid in trenches & jointed, complete all as specified and as directed by Engineer-in-Charge .
Demolition of brick work built in cement mortar including all quoins, pillars etc., but excluding pre-cast cement concrete articles complete all as specified and as directed by Engineer-in-Charge .
Material and labour Brick work with sub class ‘B’ bricks old size straight or curved on plan exceeding 6 metre mean radius built in Cement Mortar 1:4, complete all as specified and as directed by Engineer-in-Charge .
Demolition of cement concrete of any description in ground floor or in any position not exceeding 15 cm thickness, complete all as specified and as directed by Engineer-in-Charge .
Material & labour for cement concrete 1:3:6 type C-2 using 40 mm graded crushed stone aggregate for foundations, fillings & mass concrete, sub base, plinth protection, complete all as specified and as directed by Engineer-in-charge.
Material & labour for cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate for manhole benching, flooring and coping, complete all as specified and as directed by Engineer-in-charge.
Taking down cement or cement lime plaster from brick wall etc including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.
Material & labour for 15 mm thick cement plaster in CM 1: 4 on fair / unfair faces of brick work or concrete surfaces finished even & smooth without using extra cement, complete all as specified and as directed by the Engineer-in-Charge.
Material & labour for 10 mm thick cement plaster in CM 1: 4 on fair / unfair faces of brick work or concrete surfaces finished even & smooth without using extra cement, including mixing of WPC in mortar @ 3% of cement content,complete all as specified and as directed by the Engineer-in-Charge. (Note :- Water proofing compound shall be measured & paid separately as Supply only)
Material & labour pre-cast RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregates as in pre-cast manhole cover slabs of any thickness, size or shape including all necessary form work, finishing concrete surface fair & even and set in CM 1:4, including demolition of old cover, complete all as specified and directed by Engineer-in-Charge.
Material and labour for mild steel TMT bars 6 mm to 8mm dia cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed by the Engineer-in-Charge. (NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.)
Supply and fixed mild steel work in rungs, hooks, handels, manhole covers, hold fast & small articles, complete all as specified and as directed by the Engineer-in-Charge.
Returning/filling in including spreading, leveling, watering & well ramming in layers not exceeding 25 cm thick each, complete all as specified and as directed by Engineer-in-Charge.
Removal of excavated material to distance not exceeding 1.5 metre above the starting point, complete all as specified and as directed by Engineer-in-Charge .
Supply only integral water proofing powder ISI make complete all as specified and directed by Engineer-in Charge.
Supply & Fixed in repair CI cover suitable for 75mm dia CI bend/Tee etc. fixed with bolt and gasket, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixed in repair CI cover suitable for 100mm dia CI bend/Tee etc. fixed with bolt and gasket, complete all as specified and directed by Engineer-in-Charge.
Dismantling and disconecting of existing cast iron soil vent pipe fixed to wall laid in trenches including all fitting & accessories, complete all as specified and directed by Engineer-in Charge.
Supply & Fixed 100 mm dia cast iron soil waste and vent pipes (sand cast) in any length with or without laid in floor with cement joints, complete all as specified and directed by Engineer-in Charge.
Supply and fixed 100 mm dia cast iron soil waste and vent pipes (sand cast) in any length fixed to wall with cement joints including supply & fixing Stack clamps of 50mm x 5mm flat iron & 16mm dia round iron stays, including nuts & bolts & securing ends of stays to wall & roof, complete all as specified and directed by Engineer-in Charge.
Supply & Fixed 75 mm dia cast iron soil waste and vent pipes (sand cast) in any length with or without laid in floor with cement joints, complete all as specified and directed by Engineer-in Charge.
Supply and fixed 75 mm dia cast iron soil waste and vent pipes (sand cast) in any length fixed to wall with cement joints including supply & fixing Stack clamps of 50mm x 5mm flat iron & 16mm dia round iron stays, including nuts & bolts & securing ends of stays to wall & roof, complete all as specified and directed by Engineer-in Charge.
Supply and fixed in repair 100 mm bore cast iron bends/Tees of any radius diminshing pieces or tappers (larger bore measured), complete all as specified and directed by Engineer-in Charge.
Supply and fixed in repair 100 mm bore cast iron bends/Tees of any radius diminshing pieces or tappers (larger bore measured) with oval access door, complete all as specified and directed by Engineer-in Charge.
Supply and fixed in repair CI cowl 100mm bore fixed with cement joint in cement mortor 1:2, complete all as specified and directed by Engineer-in Charge.
Supply & Fixed in repair CI branch piece single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches of 100 mm with oval access door bore, complete all as specified and directed by Engineer-in Charge.
Supply and fixed in repair 75 mm bore cast iron bends/Tees of any radius diminshing pieces or tappers (larger bore measured), complete all as specified and directed by Engineer-in Charge.
Supply and fixed in repair 75 mm bore cast iron bends/Tees of any radius diminshing pieces or tappers (larger bore measured) with oval access door, complete all as specified and directed by Engineer-in Charge.
Supply and fixed in repair CI cowl 75mm bore fixed with cement joint in cement mortor 1:2, complete all as specified and directed by Engineer-in Charge.
Supply & Fixed in repair CI branch piece single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches of 75 mm with oval access door bore, complete all as specified and directed by Engineer-in Charge.
Supply and fixed in repair cast iron floor trap, 75 mm outlet dia, with grating including jointing to waste pipe fixed in cement concrete type B-1, 1:2:4, complete all as specified and directed by Engineer-in Charge
Supply & Fixed in repair SFRC (Steel fibre reinforced concrete) cover and frame (heavy duty HD-20 grade designation) size of cover 0.70 x 0.70 conferming to IS 12592, fixed in cement cocrete 1:2:4, complete all as specified and directed by Engineer-inCharge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises.
Material & Labour for non skid ceramic coloured tiles 7 to 8 mm thick (Square/ rectangular ) in floors ,area of each tile exceed 0.11 sqm but not exceed 0.18 sqm set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles, over and including 15 mm thick screed plaster in CM 1:6, complete all as specified and directed by Engineer-inCharge.
Supply & fixing in repair vitreous China squatting pan 'Orissa' pattern white of size 580mmx440mm white with integral foot rests and CI 'P' or 'S' trap (excluding flushing cistern, flush pipe above floor), including demolation of tile, PCC, taking out mass concrete filling and re filling PCC (1:7:12) type F2 after fixing of WC and trap with proper joints leakproof including PVC flush pipe upto finished floor level, and making good with 30mm thick cement concrete (1:2:4) type B0 finished rough as a sub base to recieved tile work and including all other connected work as required upto entire satisfaction of Engineer-in-charge, complete all as specified and as directed by Engineer-in- charge. (NOTE : Tile work with screed shall be measured and paid separately under appropriate item of this schedule.
Supply & fixing in replacement vitreous china wash down water closet pan (pedestal pattern, EWC) white clour (excluding flushing cistern and flush pipe) including connection to drain and to flushing pipe anti syphonage etc., including plastic water closet seat with cover (white clour) closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device including stainless steel chromium plated jet spray with 01 mtr long PVC pipe with CP connector and necessary nut bolts and with necessary CP screws and plug for fixing WC complete all as specified and as directed by Engineer-in- charge.
Supply & fixing in repair PVC low level cistern 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pvc pipe of low or high density or PVC 32 mm dia for low level cistern and PVC connections, complete all as specified and as directed by Engineer-in- charge.
Supply & fixing in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed by Engineer-in- charge.
Supply & fixing in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints for drain or rain water fixed along walls with stack clamps made out of FI 50x5mm and 16mm dia round iron stay (interval of 1m) including PCC work, complete all as specified and as directed by Engineer-in- charge.
Supply & fixing in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed by Engineer-in- charge.
Supply & fixing in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints for drain or rain water fixed along walls with stack clamps made out of FI 50x5mm and 16mm dia round iron stay (interval of 1m) including PCC work, complete all as specified and as directed by Engineer-in- charge.
Supply & fixing in repair PVC (SWR) bends (any radius) suitable for 110mm bore pipe fixed to walls or laid in floor complete all as specified and as directed by Engineer-in- charge.
Supply & fixing in repair PVC (SWR) vent cowl suitable for 110mm bore PVC pipe complete all as specified and as directed by Engineer-in- charge.
Supply & fixing in repair 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and as directed by Engineer-in- charge.
Supply & fixing in repair PVC (SWR) vent cowl suitable for 75mm bore PVC pipe complete all as specified and as directed by Engineer-in- charge.
Supply & fixing in repair 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and as directed by Engineer-in- charge.
Supply & fixing PVC (SWR) floor trap suitable for 100/110mm bore pipe, plain with grating including jointing with solvent cement complete all as specified and as directed by Engineer-in- charge.
RAKESH KUMAR GARG & CO.
M/S SAI BUILDERS
M/S BHAGWATI CONSTRUCTION COMPANY
M/s DHEERAJ JAIN CONSTRUCTION COMPANY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .