Loading
Loading…
Loading…
Tender Value
₹6.8 Cr
EMD Value
₹10.2 L
Closing Date
22 Jul 2026, 11:00 pm
Similar tender results from the same govt authority in the past 3 years.
Gulbarga Electricity Supply Company Limited
Construction of new 33kV UG Cable (Double Run)/Overhead Line of 4.6Kms from 110/33/11kV West MUSS to the proposed 5000kVA HT Installation for Electric Bus Charging Station at Bus Depot No.4, KKRTC, Kalaburagi Division-II (PM E Bus Sewa) in Kalaburagi City under Deposit Contribution Work on Total Turnkey Basis
306785
GESCOM/2026-27/EL/WORK_INDENT296
Open
Electrical
GESCOM Superintending Engineer Projects Corporate Office Gulbarga
3 documents required · 3 mandatory
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
The Bidder should have successfully completed at least one work of 33kV Voltage Class Overhead line/HT UG Cable Line/33kV Voltage class Sub Station along with extension of 33kV line of value not less than 90 percentage of the amount put to tender in any One year during the previous financial years i.e. FY 2021 22, 2022 23, 2023 24, 2024 25 and 2025 26 on PTK/TTK basis in any ESCOMs/ State/ Central Government/ Distribution Companies/ PSUs on PTK/TTK Basis as on the date of bid submission. Which shall be in satisfactory service for at least one year from the date of commissioning. Note Updated to the FY in which the tenders are invited. The value of the completed works shall be given a weight of 10 percentage per year to bring them to the price level of the FY in which the tenders are invited. Scanned copy of the DWA and satisfactory Work commissioning certificate duly indicating Qty. & amount of executed works with date of completion issued by an officer not below the rank of Executive Engineer or equivalent officer of the concerned ESCOMs/Govt. Utilities/PSUs shall be uploaded
The Bidder should have executed the work of at least minimum 50 percentage of tendered quantity of 33kV Overhead line/HT UG Cable line work commissioned on PTK/TTK Basis in any ESCOMs/ State/ Central Government/ Distribution Companies/ PSUs during any one year of the previous financial years i.e. FY 2021 22, 2022 23, 2023 24, 2024 25 and 2025 26 as on the date of bid submission. Which shall be in satisfactory service for at least one year from the date of commissioning. Scanned copy of the DWA and Commissioning certificate duly indicating Qty. & amount of executed works with date of completion issued by an officer not below the rank of Executive Engineer or equivalent officer of the concerned ESCOMs/ Govt. Utilities/PSUs shall be uploaded
Turnover: The bidder should have achieved in at least Two Financial years, a minimum financial turnover of not less than two times the amount put to tender during the 5 Financial years ie. FY 2020 21, 2021 22, 2022 23, 2023 24 and 2024 25. Note Updated to the FY in which the tenders are invited. Financial turnover of previous years shall be given a weight of 10 percentage per year to bring them to the price level of the FY in which the tenders are invited. The bidder should upload the copy of Audited Annual Financial Statements (Including Profit & Loss Account), Balance sheets for the respective Financial Years duly signed by proprietor/Director & certified by Chartered Accountant with UDI No
Liquid Assets: The Bidder should have Liquid assets and/or availability of Credit Facilities of not less than 25 percentage of amount put to tender as on the date of NIT or later before submission of bid, consisting of cash at bank, term deposits with maturity date and availability of fund based credit facility. A certificate issued by any Nationalized Bank/ Scheduled commercial Bank. The bidder should upload the copy of the Credit Certificate should possess the name of the firm, tender indent number and credit facility to be issued in the name of the Chief Engineer (Ele)., Operation, Corporate Office, GESCOM Kalaburagi. The Liquid Asset certificate shall be uploaded in the format enclosed as per Annexure A. If bidder uploads in any other format, then such bids will be rejected. The conditional credit facility certificates are liable for rejection
The Bidder should be a registered sole proprietorship Firm or a partnership Firm under Partnership Act 1932 in India or a limited liability partnership LLP firm act 2008 or a registered company incorporated in India under companies Act 1956/2013. Scanned copy of Certificate of Incorporation in case of Registered Company/Partnership deed in case of Partnership Firm or Certification of Incorporation issued by Registrar of Companies in case of LLP Firm or PAN and GST registration certificate in case of sole proprietorship firm is to be uploaded
The Bidder should possess a valid Super Grade License / Class I Electrical Contractors License issued by the Govt. of Karnataka as on the date of submission of bid. The valid Super Grade License / Class I Electrical Contractors License certificate issued by Electrical Inspectorate, GoK is to be scanned and uploaded.
Bidder shall upload the valid documents of EPF, ESI and GST Registration certificate
The Bidder shall not have been Defaulted /Barred/Black Listed against any Work against any of the previous Orders placed by any State/Central Government/Public sector under takings/Private Sector in the last 05 Years as on the date of submission of bid
Assessed Available Tender Capacity The Bidder has to furnish the details of works in hand as on date of submission of bids duly indicating date of award, awarded amount, percentage of work completion and work description which is to be certified by the officer not below the rank of Executive Engineer. The available tender capacity shall not be less than the Total Amount Put to Tender. The assessed available tender capacity equals AxNx1.5 minus B Where, Where, A equals Maximum value of Infrastructure works executed in any one year during the last 5 years (Updated to FY in which tenders are invited), taking into account the completed as well as works in progress. N equals Number of years prescribed for completion of works for which tenders are invited. B equals value at CSR 2025 26 price level of existing commitments and ongoing works to be completed during the next 9 months (Period of completion of the works for which tenders are invited). Note Updated to the FY in which the tenders are invited. Financial turnover of previous years shall be given a weight of 10 percentage per year to bring them to the price level of the FY in which the tenders are invited. The bidder should upload statement showing the value of existing commitments and ongoing works as well as the stipulated period of completion remaining for each of the works listed shall be counter signed by the employer in charge, not below the rank of Executive Engineer or Equivalent. The statement shall be as per the format prescribed in Annexure B. The bidder shall note that the value of pending work should be considered based on financial progress achieved in the particular work
₹5,000
₹10.2 L
15 Jun 2026
15 Jun 2026
24 Jul 2026
20 Jun 2026
22 Jun 2026
Construction of new 33kV UG Cable (Double Run)/Overhead Line of 4.6Kms from 110/33/11kV West MUSS to the proposed 5000kVA HT Installation for Electric Bus Charging Station at Bus Depot No.4, KKRTC, Kalaburagi Division-II in Kalaburagi City under Deposit Contribution Work on Total Turnkey Basis
Supply of Coyote ACSR Conductor including for jumpers, sag etc
Supply of Lynx ACSR Conductor
Supply of Aluminium Binding Wire
Supply of Aluminium Tape
Supply of 9.5Mtrs Long RCC Pole 350 Kg WL for DPs/TPs/FPs.
Supply of M+9/M+6 Lattice Tower: Fabrication, Galvanizing and structures materials with stubs and all necessary matching material for Road Crossings ie.1.823 MT per Tower (4 Nos M+6 *1.823MT=7.292MT...
Supply of Galvanised Bolts & Nuts for above towers (4 Nos M+6 *0.01MT=0.04MT & 14 No M+9 *0.085MT=1.19MT) Total=1.23 MT.
Supply of 33KV Polymeric Pin Insulators.
Supply of 33kV 70 KN Polymer Insulator (Ball & socket type)
Supply of 33kV Composite Disc Insulator
Supply of 33kV 90KN Polymeric Disc Insulators
Supply of 33 KV Horizontal cross arm
Supply of 33kV HT Single Top Support with bolts & nuts
Supply of Clamp 9.5Mtr RCC Poles for 33kV
Supply of 33 kv DP Set (2 Pole structure Kit) (Excluding poles)
Supply of Guy sets for 33kV line with strain insulator complete
Supply of 8 SWG GI Wire
Supply of Anti climbing devices (per pole 12mtr /kg)
Supply of PG Clamps for Coyote to Coyote
Supply of Bolted type tension clamp Single Coyote ACSR Conductor 70/90KN 16mm.
Supply of 33 kV 3 Core XLPE UG Insulated Aluminium Cable (ROUND WIRE ARMOUR)-33 kV 3 Core XLPE UG Cable-400Sq.mm
Supply of 33kV Heat Shrinkable Straight through jointing kits with Aluminum lugs& ferrules: 33 kV 3 Core XLPE UG Cable - 400 Sq.mm
Supply of Heat Shrinkable outdoor type cable termination kit-33 kV 3 Core XLPE UG Cable-400Sq.mm
Supply of RCC Hume Pipe, 2000 mm Long, 150 mm Dia
Supply of Collars for RCC Hume Pipe
Supply of Cable covering tiles 250x125x40 mm
Supply of Artificial/Manufacture Sand (Extracted from Vol-1, PWD SR Sl No. 62)
Supply of GI Pipe, 100 mm Dia for drain crossing, cable raising etc., (Extracted from Vol-5, BWSSB SR Item No. 177)
Supply of Route & Joint indicating slab with MS Anchor rod
Supply of Isolators: 33 kV, 800 A, 31.5 kA Isolators, double break with manual operating mechanism, with solid core insulator, terminal connector suitable for Al. tube/conductor, marshalling box etc.,...
Supply of 33KV, 800A, 25KA Class Double break Upright mounting type without earth switch. (Live point height 3750mm).
Supply of Earth Bond 450 mm Long
Supply of 30 kV Metal Oxide with surge counter Arrestor class : Discharge Class 3 (Station Medium Duty (SM))- for Transformer & UG Cable /Discharge Class 2 for Overhead Line
Supply of Mounting Structures: Equipments made out of fabricated galvanised angle iron, SM Rails for transformer plinth, cable mounting structures made out of channels and angles including Bolts & Nut...
Supply of Mounting Structures: For 33KV Current Transformers - 0.089+0.004 B&N x 3 No.= 0.279 MT
Supply of Mounting Structures: For 33KV Voltage Transformers - 0.089+0.004 B&N x 3 No.= 0.279 MT
Supply of Mounting Structures: For 33KV Lightning Arrestors - 0.082+0.005 B&N x 3 No.= 0.261 MT
Supply of CI Pipes of 100 mm ID 13mm thickness, 2.75 Mtrs with 2 part clamp out of GI Flat 50x6mm contineously welded alround the pipe using cast iron welding electrodes (as per approved R&D KPTCL d...
Supply of Sodium Bentonite Clay for above pipes
Supply of Number plates
Supply of Danger boards
Supply of Phase Plates (set of 6 per tower) [for 18 M type towers and at DPs]
Supply of Name plate for equipment/earthpit
Supply of CTs: Oil filled Current Transformer 0.2s class with terminal connector suitable for Al. tube/conductor etc., complete as per technical specification: 33KV, 800A, 25KA CT of Ratio 400-200/1-1...
Supply of Marshalling Box for 110 kV / 66 kV / 33 kV CT with 3 core as per technical specification
Supply of PTs: Oil filled Current Transformer 0.2s class with terminal connector suitable for Al. tube/conductor etc., complete as per technical specification: 33KV Single phase, oil filled, outdoor t...
Supply of Marshalling Box for 110 kV / 66 kV / 33 kV CT with 3 core as per technical specification
Supply of Cu Control Cable with Accessories (With Glands/Lugs/Ferruels) 4 Core 6 Sq.mm
Supply of PVC Pipes: Providing PVC ringtite pipes conforming to IS 4985:2000: 32 mm dia
Supply of Bends: Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments: 32 mm dia
Supply of CT PT Operated ETV Meter 0.2s Accuracy Class with ABT feature and DLMS protocal with ToD with RS 232 Port UNIDIRACTIONAL (Suitable for above HT Installation, Rating -/1A -/63.5V)
Supply of Meter box suitable for fixing 3 ETV meters
Surveying for construction of HT and LT Lines duly furnishing single line diagram indicating Pole locations
Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr Long Steel/RCC/PSCC supports as per approved Drawing - Ordinary Soil
Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr Long Steel/RCC/PSCC supports as per approved Drawing - Hard Soil
Digging of Pit for GI Pipe type Earthing: Ordinary Soil.
Digging of Pit for GI Pipe type Earthing: Hard Soil.
Digging of Pit for Guy Set: Ordinary Soil.
Digging of Pit for Guy Set: Hard Soil.
Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth
Erection of Horizontal cross arm including Single Top Support brace & insulator fixing with bolts & nuts.
Erection of DP Set (2 Pole structure Kit) (Excluding erection cost of poles)
Erection of Guy sets for 33kV line with strain insulator complete. (Excluding Digging of Pit)
Guy concreting with boulders mud & Sand. (300x300x450mm)
Erection of Anti climbing devices (per pole 12mtr /kg)
Erection of: M+6 Lattice Tower Complete (4 Poles * 1.823MT = 7.292MT): sorting of tower parts made of fabricated angle iron,setting up of stubs templates,assembling & erection of tower, tightening of ...
Stringing of ACSR Coyote Conductor etc
33KV UG Cable: (b) Laying Cables of sizes 3C x 300 to 3C x 400 Sq mm
33KV UG Cable: (d) Making of straight through joints (3Cx400Sq.mm)
33KV UG Cable (e) Making of cable terminations
33KV UG Cable (f) Covering the cable with tiles
33KV UG Cable (g) Spreading Sand and forming with Sand round the cable
33KV UG Cable: (h) Laying of RCC Hume pipes
33KV UG Cable: (i) Laying of GI Pipe
33KV UG Cable: (j) Laying of Route and Joint indicating stones
Laying of UG Cables by Trenchless Technology (HDD) by adopting Horizontal Boring & Drawing of cable including preparation at site: Normal Soil - 8” Bore (UG cable along with upto 5 Nos of 50/42 mm o...
Laying of UG Cables by Trenchless Technology (HDD) by adopting Horizontal Boring & Drawing of cable including preparation at site: Rock Soil - 8” Bore (UG cable along with upto 5 Nos of 50/42 mm or ...
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Erection of Mounting Structures: Erection, alignment & assembly of fabricated steel lattice structure, pedestal structures & mounting structures for GOS, CTs, PTs, LAs etc., For 33KV Isolators - 0.25+...
For 33KV Current Transformers - 0.089+0.004 B&N x 3 No.= 0.279 MT
For 33KV Voltage Transformers - 0.089+0.004 B&N x 3 No.= 0.279 MT
For 33KV Lightning Arrestors - 0.082+0.005 B&N x 3 No.= 0.261 MT
Erection of Isolators (33kV 800A): Assembly, Errection alignment and wiring including movement from the point of unloading to the point of erection. (Upright Isolator).
Assisting in Testing and Commissioning (Upright Isolator)
Erection of Lightning arrestors and wiring including movement from the point of unloading to the point of erection
BUSBAR Formation: Main Bus/Cross Bus for 33kV for all the three phases in a segment with fixing of insulator spacers, levelling of string conductors to the required height above the equipment, includ...
Grounding of Equipments/Structures, Earthmat formation: Supplying and laying of MS Flats of various sizes, welding and applying ACB paint to welded portion and covering with sodium bentonite clay as p...
Grounding of towers/euipment including cost of 40 mm dia 2.5 mm thick, class 'C' G.I. Pipe of 3 metres length as per specification with 50 X 6 mm GI Flats 3 metre long, salt, charcoal, including excav...
Grounding of equipment by providing cast iron pipe of 100 mm ID 13 mm thickness, 2.75 metre long with 2 part clamp out of G.I. Flat 50 X 6 mm continuously welded alround the pipe using cast iron weldi...
Supplying & providing 450mm dia 450 mm height 1.5" to 2" thick hume pipe collar (non-pressure type) for earth pits including all lead and lifts etc.,
Providing 25 mm dia M.S. Rod 1.05 metre long earthmat spikes including heating, bending top 50 mm overlap flattening and making spike edge at one end driving into the earth below the ground level and ...
Application of Sodium Bentonite Clay around Earthing materials.
Fixing of Number plates
Fixing of Danger Boards
Fixing of Phase Plates (Set of 3 Nos.)
Fixing of Name plates for equipment/Earth pit
Erection of CTs, PTs, Marshalling Box and wiring including movement from the point of unloading to the point of erection (Set of 3Nos)
CT Wiring: Inspection of wiring, ferruling, crimping of lugs, connections in CT, marshalling box & control panel, extension of earth mat etc., (Set of 3Nos)
PT Wiring: Inspection of wiring, ferruling, crimping of lugs, connections in PT, marshalling box & control panel, extension of earth mat etc., (Set of 3Nos)
Assisting in Testing and Commissioning of CT/PT (Set of 3Nos)
Laying of Control Cable with Accessories: (With glands/lugs/ ferruels): 4 Core 6 Sq.mm
Erection of Metering Box with clamping arrangement for mounting on the structure, fixing ETV Meters and wiring including connecting to the existing ground.
Station yard lighting (outdoor): Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diff...
Supplying and fixing of Hot dip Galvanized M.S. Bracket suitable for outdoor luminaries and mounted on poles/ Octagonal pole using necessary bolts, nuts etc., complete - Single Arm Bracket with 1000 m...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Fixing Halogen/Metal Halide/SVL/IL/LED/ Floodlight Fitting over existing Pole/Wall Ceiling including Clamps, Bolts, Nuts and Wiring using suitable capacity Wires.
33KV UG Cable: (a) Cable trench excavation, Ordinary soil
(Extracted from Vol-1, PWD SR Sl No. 1.17.1) (4000*0.8*1=3200Cmt)
Refilling and consolidation (Extracted from Vol-1, PWD SR Sl No. 1.10) (4000*0.8*1=3200Cmt)
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Pole Concreting with CC 1:2:4 (650x500x1850mm)
Coping of Poles. (150mm all alround the pole for an height of 300mm) (400x400x300mm)
Foundation of M+6 Tower : Construction of RCC Footings/pedestals using M25 grade concrete and Fe550D steel reinforcement including the cost of excavation, providing bed concrete (1:2:4) and back filli...
Mounting structures foundations:
Construction of RCC Footings/pedestals using M-25 grade concrete and Fe550D steel reinforcement including the cost of excavation, providing bed concrete (1:2:4) and ba...
33 KV surge arrestor support structure
33KV isolator support structure
33 KV Voltage transformer support structure
Earthmat formation: Excavation formation,refilling (eartmat design area 60mx50m is considered with 5m spacing between the adjacent earth flats approximately as per MS flat annexure) However during th...
Site surfacing (Jelly spreding 20-25 mm): Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants et...
Misc charges as per actual Estimates approved such as shifting existing 07 Nos of DTCs, 02 Kms of 11kV lines, 01 Km of LT lines for getting corridor clearance for proposed 33kV line (Lump sum Amount)
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Bid Docs to upload.zip
Tender Document • 18.21 MB
Download all tender documents and submit your bid