Providing, Laying and testing 150mm and 80 mm dia water line from Dhalli Tunnel to Hill grove School Sanjauli Bye Pass, Shimla.

Amount

Excavation in foundations, trenches etc., in earth work in all type of soil such as pick work Kankar,moorum shungles including decomposed of soft and hard rock . upto all heights stacking the excavated earth not more than 3 meters clear from the edge of the excavation and then returning the stacked soil in 15cm layers,when required into the plinths sides of foundations etc., consolidating each deposited layer by when required into the plinths sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth upto all leads and lifts etc. complete in all respect as per direction of Engineer-in-Charge.

Providing, supplying, Laying Jointing and testing Galvanised mild steel pipe with plane ended bevelled edged, butt welded pipes and its jointng withstand with the designed pressure of following Diameter conforming to I.S 1239/2000 (Medium class), jointing all fitting , bends, Tees, Collars, Tappers etc. including hydraulic testing of pipes as per direction of Engineer in charge etc all complete refer enclosed Specification and as per technical specs of tender.

150mm nominal bore (Medium Class)

80mm nominal bore (Medium Class)

Providing and fixing of ISI marked Cast Iron sluice valves conforming to IS 14846 latest with upto date amendments of Kirloskar/ Gled/ Leader /Kartar /KSB/ VAG make for nominal pressure PN 1.6. The valve should be of rising stem type, supplied without hand wheels but with caps. The materials for different Table 1 of 15 14646. The valves shall be installed at existing water lines by cutting existing lines welding suitable size making flanges and spool/ tail pieces etc. as per site conditions in all respects as per site conditions in all respects as per directions by Engineer-in-Charge.

Making connection of galvanised steel distribution branch with galvanised mild steel main nominal bore by providing and fixing tee including cutting and threading the pipes complete

20mm to 40mm

50mm to 80mm

Providing,Laying, welding and fixing of M.S. flanges of table 5 and of following diameter at suitable reaches, conforming to following table as per IS:6392-1971 (Latest with upto date amendments) and welding of MS Flanges with G.I. Pipes/ MSERW pipes in two layers on both faces to make the joint leak proof (The cost of providing and laying of G.I.Pipes/MSERW Pipes to be measured and paid for separately). The welding of flanges should conform to IS 816-1969 with electrode as per IS : 814-1991 and required number of nuts & bolts conforming to IS: 1364. The thickness of gasket not less than 3.00mm conforming to IS : 2712-1998. The work shall be done as per entire satisfaction of Engineer-in-Charge within all leads and lifts.

Random rubble maosnry/polygonal rubble masonry (uncoursed /brought to courses ) with approved quality of hard stone in foundation & plinth including leveling up with cement concrete 1:6:12(1cement:6 sand:12 graded stone aggregate 20 mm nominal size) ( in 1:6 (1cement:6 sand) including all leads 7 lifts complete in all respect & as per the direction of engineer in charge

Providing & laying cement concrete.1:2:4 (1cement :2sand :4graded stone aggregate 20 mm nominal size ) and curing complete e/c the cost of form work and reinforcement in foundation & plinth complete.

SITC of AC powered Full bore type Electromagnetic Flow meter with inbuilt GSM modern at the pipe locations with all necessary hardware and software complete.(150 mm dia)

shiv iron general engineers

Stuti Builders

MANOHAR LAL VERMA

Haminder Pal

gian singh

KRP Engineering Pvt. Ltd.