COMPREHENSIVE MAINTENANCE CONTRACT OF VARIOUS MD/ OTM BLDGS AT NEW PINTO PARK UNDER GE (AF) PALAM DELHI CANTT-10

Amount

Demolition of brick work built in cement mortar, including all quoins, arches, pillars etc of any description including removing debrish from site complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar in floors, aprons etc complete all as specified and as directed.

Demolition of concrete in ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Taking down cement plaster or cement lime plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Dismantling asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

Dismantling timber scantling 40sqcm over in section, in any position (unframed work) complete all as specified and as directed.

M&L for brick work with old size sub class `B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified

S&F for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F for mild steel work as in roof trusses(framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe- 290 Grade E-165 complete all as specified and as directed.

M&L for mild steel works (Fe-290 Grade E-165) as in posts and struts etc in fencing of angle or other sections, including cutting tops to shape as directed, drilling holes, notching for wire etc etc conforming to Fe- 290 Grade E-165 complete all as specified and as directed.

M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) including finished even and smooth without extra cement and with water proofing compound by weight as per manufacturer's instructions including necessary scaffolding for building (G+3 storey) complete all as specified and as directed. Note:- WPC shall be measured and paid separately under respective items of BOQ.

M&L for 10mm thick plaster on fair faces of brick work or concrete surfaces in cement mortar (1:3) as in ceilings including finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) including finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparing plastered or unplastered newly surfaces on ceilings including brooming down or steel wire brushing, scraping down and applying three coats of white wash complete all as specified.

M&L for preparing plastered or unplastered old surfaces on ceilings including brooming down or steel wire brushing, scraping down and applying two coats of white wash complete all as specified.

M&L for preparing plastered or unplastered new surfaces on walls including brooming down or steel wire brushing, scraping down and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and as directed.

M&L for preparation of surfaces plastered or unplastered new surfaces on walls including brooming down or steel wire brushing, scraping down and applying two coats of cement base paint of approved colour and shade complete all as specified and as directed.

M&L for prepartion of plastered or unplastered old decorated surfces by complete removal of existing treatment of walls and applying two coats of oil bound distemper over a coat of primer over 3 mm thick (avg thickness) cement base wall care putty complete all as specified.

M&L for prepartion of plastered or unplastered old decorated surfces and applying one coat of oil bound distemper complete all as specified and directed.

M&L for preparation of plastered or unplastered old decorated surface of walls by brooming down or with steel wire brushing, scrapping down, smoke, soots, moulds, moss, efflorescent salts & trading oil, greasy spots and filling cracks/holes by putty and applying one coat of cement base paint complete all as specified.

M&L for cleaning of PVC over head service tank of capacity exceeding 2000 litres but not exceeding 5000 litres, cleaning by brooming, removing all dirt, vegetation grown on roof around tank if any, washing the tank with approved bleaching powder rendering it clean to store potable water after applying two coats lime wash internally including writing the date of cleaning and capacity of tank with white synthetic enamel paint (letters not exceeding 30 centimetre height) on the outlet surface directly visible complete all as specified and as directed.

Description all as per item No. 24 herein above but tank of capacity exc 500 ltrs and not exc 1000 litres complete all as specified.

Demolition of cement concrete any description and in any position not other wise specifically provided complete all as specified and as directed.

M&L for plain cement concrete (1:2:4) type B2 (using 40mm graded stone aggregates) as in posts and pillars complete all as specified and as directed.

M&L for 75 mm thick cement concrete (1:4:8) type D2, (using 40 mm graded stone aggregates) as in sub base including finished even and fair complete with and including use and waste of necessary form work all as specified.

M & L for hardcore of gauge n exc 63mm broken stone or boulders, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for factory made machine pressed precast concrete interlocking paver block any shape and size, with grey cement and pigment to match, confirming to IS 15658-2006 of 60mm thickness, M-35 grade with and including laid over 50 mm thick sand cushioning complete all as specified.

M&L for pre polished chequred cement concrete tile of size 300mm x 300mm x 25 mm thick, set, jointed and pointed with neat cement slurry with grey cement and pigment as in floors with and including 20 mm thick screed bed with CM (1:4) complete all as specified.

S&F for false ceiling at all heights with semi perforated 12mm thick micro tegular edged GRG (Glass Fibre Reinforced Gypsum false ceiling tiles of size 595mm x 595 mm of approved texture, design and patterns having moisture content less than 2% , humidity resistance of 99%, NRCO.50 TO 0.75 AS PER is 8225:1987, nONCOMBUSTIBLE AS PER bs 476 (PART 4) -1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on and including interlocking metal T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000mm, cross-T of size 15x32 mm of length 1200 mm and secondary intermediate cross -T of size 15x32 mm of length 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2 mm, Galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws complete all as specified and directed.

Taking down shutter of any description of area exceeding 1 sqm and not exceeding 2 sqm each complete all as specified.

Taking down chowkhat or frame (without taking off shutter from the frame) of area not exceeding 1.5 sqm each, removing from the site including cutting holes required for taking out existing hold fast etc. complete all as specified.

Description all as per item No 34 herein above but area exceeding 1.5 sqm and not exceeding 4 sqm each.

S&F for rolled mild steel framed work as in doors or gates of angle or other section gates with gusset plates, rails, cladding, chowkhats/frame or like etc welding hold fast, hinges etc and conforming Fe-290 Gde-E-165 complete all as specified.

S&F for 35 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified.

M&L for second class hard wood factory made 35mm thick glazed and skeleton shutters, open repated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass/wire mesh etc size of member of shutters with sash bar as specified in SSR Part- I, Section 8, clause 8.24 (a) complete all as specified and as directed.

S&F for factory made PVC door frame of size 50mmx47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing complete all as specified and as directed.

Supply and fixing for factory made Solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC shets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC shet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site as per specification and drawing.

S&F for butt hinges, stainless steel, ISI Marked 100mm size, complete all as specified.

S&F for MS butt hinges 100mm size, cold rolled, medium weight fixed with screws to wooden frames or welding to steel frames etc complete all as specified.

S&F for aluminium sliding door bolt, 300 mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections or cast alluminium alloy cincluding a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified.

S&F for aluminium anodized barrel tower bolts of extruded section length of bolt 200mm long complete all as specified.

S&F for aluminium anodized barrel tower bolts of extruded section length of bolt 150 mm long complete all as specified.

S&F for extruded aluminium alloy handles, fabricated type, anodised, 125 mm size complete all as specified.

S&F for extruded aluminium alloy handles, fabricated type, 100 mm size complete all as specified.

S&F for stainless steel wire cloth 0.36 mm nominal dia of wire and avedrage width of apertupre 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

S&F in repairs for stainless steel wire cloth 0.36 mm nominal dia of eire and avedrage width of apertupre 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified.

Hacking out old broken glass, any thickness, size, quality, or description from wooden/metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete upto 4th storey complete all as specified and as directed.

Supply and fixing for sheet glass 4mm thick ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane upto 4th storey complete all as specified and as directed.

Supply and fixing for figured glass pin head type 3mm thick glazing with oil putty in square not exc 0.50 Sqm each panes upto 4th storey complete all as specified and as directed.

S&F for factory made steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed

S & F for factory made steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with out glazing bars, dovetailed or welded complete all as specified and as directed

M&L for preparation of new or previously untreated surfaces of wood of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of steel of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome oxide primer complete all as specified and as directed.

M&L for preparation of old painted surfaces of wood of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted surfaces of steel of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint complete all as specified.

S&F in repairs 18/19 mm thick prelaminated partcile board both sides , interior grade , of approved shade and pattern fixid with screws to timber frame for cupboard and shelves and all necessary fittings (hinges , scrowes , beeding piece haspstaple ), complete all as specified

M&L for 75mm thick PCC (1:2:4), type B-2 (using 40mm graded stone aggregates) as in floor including use of necessary form work complete all as specified.

S&F for framed work such as grills, gratings etc with ends of bars shouldered and or reveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified.

Taking down carefully unserviceable copper/aluminium point wiring (light, fan, socket or power )complete including fixture and fitting such as wooden terminal boxes, plastic laminated sheet cover including taking down of meter board any type complete all as specified and directed.

Taking down unservesiable sub main wiring with conduits/battens etc complete all as specified and as directed.

M & L for Point wiring with single core PVC insulated but unsheathed 1.5 Sqmm FRLS multistranded copper conductor cable 1100 volts grade IS-694 marked drawn in and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked with all conduit fittings and fixing accessories including pressed steeI boxes with bakelite sheet for mounting switches, sockets, fan regulators, etc and earth wire single core PVC insulated but unsheathed multistrand copper conductor cable 1100 volts grade IS-694 marked 1.5 Sqmm FRLS cable as continuous earth wire connecting to common earth dolly for one light point controlled by one switch one way complete all as specified.

All as per item No 64 above but for one fan/exhaust fan point controlled by one switch.

All as per item No 64 above but for one socket outlet 5 Amp controlled by one switch on independent board

All as per item No 64 above but for one 3 pin 5Amps socket out let point on the same board controlled by one switch complete

All as per item No 64 above but for one bell point controlled by one switch.

All as per item No 64 above but for one power point 6 pin 15 Amps socket out let with 2.5 Sq mm stranded copper conductor cable PVC insulated including earth wire 2.5 Sq mm copper conductor cable connected to earth dolly complete, all as specified and directed.

Supply and fixing in repair ceiling rose, surface type, 65mm x 50mm, 3 terminal complete all as specified.

Supply and fixing in repair Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittingscomplete all as specified.

Supply and fixing in repair stepped fan regulator 300 watt, 230 volts, 50 HZ, AC. Complete all as specified.

Supply and fixing in repair switch piano flush type 5 Amps, single pole one way complete, all as specified and directed by Engr-in-Charge.

Supply and fixing in repair socket out let 3 pin 5 Amps, flush type complete, all as specified.

S&F in repair switch piano flush type single pole one way15 Amps complete, all as specified.

Supply and fixing in repair socket outlet 2 in 1, 6 pin 5/15 Amps, flush type complete all as specified.

Supply and fixing in repair electric ding dong bell, 230 volt AC, single pole, complete, all as specified.

Supply and fixing in repair flush type bell push, 5 Amps complete all as specified.

S&F in repair Indoor decorative LED battens- integrated type 20 watt 4 feet white fixture suitable for LED tube 20 watt , bipin holder, connector block, LED rod 20 watt etc complete with all accessories internally are wired and including connecting up with twin core copper conductor cable complete all as specified and directed by Engr-in-Charge. Make- Havells Cat No-LHEXACP7UN1W020 or equiavent from the list of makes.

Supply and fixing in repair LED bulb 7 watt fixed in pendent holder /bulk head complete all as specified and directed. Make- Havells Cat No- LHLDEUEEMC8R007 or equiavent from the list of makes.

Supply and fixing in repair sheet metal enclosure for distribution board SPN (when MCBs to be used ) 8 way double door, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified.

Supply and fixing in repair vertical type load line distribution board, double door ,4 way, AC, 3 phase, 415 volts, TPN bus bar 200 Amps rating and earth bar & din rail suitable for accomodation of MCCB 100/125 Amp, 16KA 4 Pole as incomer complete all as specified and as directed by Engr-in-Charge.Make-Legrand Cat no-507740 or equiavent from the list of makes.

Supply and fixing in repair vertical type load line distribution board, double door ,6 way, AC, 3 phase, 415 volts, TPN bus bar 200 Amps rating and earth bar & din rail suitable for accomodation of MCCB 100/125 Amp, 16KA 4 Pole as incomer complete all as specified and as directed by Engr-in-Charge. Make-legrand Cat no-507741 or equiavent from the list of makes.

Supply and fixing in repair MCCB, 4 pole 100A, 16KA,complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair MCB, SPN, 40A ,10KA complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair MCB, SP, 6-32A ,10KA complete all as specified and directed by Engr-in-Charge.

M&L for sub main wiring with two single core 6.0 sqmm PVC insulated FRLS multistranded copper conductor cable drawing into and including rigid non metallic PVC conduit, medium grade ISI marked with all conduit fittings & fixing accessories and one single core 6.0 sqmm multistranded copper conductor cable as continous earth wire complete all as spd and directed by Engr-in- Charge. Note:- Two core of 6.0 sqmm main cable, one core of 6.0 sqmm earting cable and PVC conduit shall be measured and paid as one run.

M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, check nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) with fair finish, internal surface of concrete chamber shall be given 15mm thick plaster in CM (1:4), funnel with wire gauge of 22 gauge, 8 mesh per liner inch, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) and specified including provision of earth wire protected by 15mm dia medium grade GI pipe and watering GI pipe shall be 20mm bore medium grade etc complete, all excavation and earth work & connecting the earthing to an earthing test point main switch board as specified and testing on completion complete all as specified & directed by Engr-in-Charge.

RK TRADERS

High Tech Metal India

M/S Ashoka Engineers and contractors

DOLMA ASSOCIATES

JAIPAL AND BROTHERS

M/S Davinder Kumar

SAMIYA ENTERPRISES