Loading
Loading…
Loading…
Tender Value
₹56.0 L
EMD Value
₹1.1 L
Closing Date
26 Oct 2026, 3:30 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
OTHERS
14 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N crores or V, whichever is lower; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of total contractual payments in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender. In case of composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender. Note: Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. Note: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by Public listed company having average annual turnover of Rs.500.0 Crores and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by Public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates, for all payments received and copy of final/last bill paid by company in support of above work experience certificate. And If a bidder has successfully completed a work as subcontractor and the work experience certificate has been issued for such work to subcontractor by a Govt. organisation or public listed company as defined in Note for Item l0.l part-I of GCC, the same shall be considered for the purpose of fulfillment of credentials. (Authority: Railway Board's letter no. No. 2020/CE- UCT/3E/GCC/Policy, Dtd.30.12.2021)
Similar nature of work for this tender is "Any Civil Engineering Works involving GEO-Technical Survey/Soil Exploration work, structural Design and Preparation of Drawings".
27 conditions · 1 needing a document upload
Documents to be uploaded only in the website by the Tenderer Following Annexure duly filled and signed are to be uploaded online only prior to Closing of Tender. Original copy of all the documents to be submitted to office within 7 days whenever demanded by the Railway. Otherwise, Railway reserves rights to Reject/Accept such tender/offer without any reference to the tenderer/ tenderers. Annexure are available at Upload/View Document menu in Home Page of IREPS portal for works tender. Annexure Description 1. Annexure-I(a) Details of the Works Completed by the tenderer during the last seven years to be filled & submitted as per Annexure-I(a). 2. Annexure-I(b) Details of contractual payment received by the Tenderer during the last 3 (three) financial years including the current financial year to be filled & submitted in Annexure-I(b).3 Annexure-II Details of Plants and Machinery with the tenderer to be filled & submitted as per Annexure- II. 4. Annexure-III Details of Personnel and Organization of the Tenderer to be filled & submitted as per Annexure-III. 5. Annexure-IV Details of Works Presently on hand of the Tenderer to be filled & submitted as per Annexure- IV. 6. Annexure-V Details regarding Association of Railway Officer(s) with the tenderer to be filled & submitted as per Annexure- V. 7. Annexure-VI List of the Arbitration Cases of the Tenderer during last five years to be filled & submitted as per Annexure-VI. 8. Annexure-VII List of the Court Cases of the Tenderer during last Five years to be filled & submitted in Annexure- VII. 9. Annexure- VIII NEFT MANDATE FORM. All Payments to the agency (including the refund of the Bid Security of the unsuccessful bidder preferably) will be remitted through NEFT. The Tenderer is required to submit Bank details and A/C No. etc. in Annexure- VIII. 10. Annexure-IX GST COMPLAINT INVOICE: To be filled & submitted as per Annexure-IX. 11. Annexure V (A) by each partners of Partnership Firm/ JV/ HUF/ LLP; FORMAT FOR CERTIFICATE TO BE SUBMITTED / UPLOADED BY TENDERER ALONGWITH THE TENDER DOCUMENTS as per Annexure-V (A) of GCC-2022 12. Annexure-XI LETTER OF CREDIT: To be filled & submitted as per Annexure-XI. 13. Annexure-VIA BID SECURITY: Bank Guarantee Bond from any scheduled commercial bank of India to be filled & submitted as per Annexure-VIA. 14. Annexure-VIB Annual Contractual Turnover Data for the Previous 3/4 Years (Contractual Payment only) to be filled & submitted as per Annexure-VIA. 15. Submission of Form VA properly. 16. Annexure-VI of GCC- 2022: TENDERER'S CREDENTIALS (BID CAPACITY) to be submitted as per Annexure-VI of GCC-2022 and Serial No. 05 of Advance Correction Slip No. 11 of IRSGCC 2022. (This annexure will be applicable, if tenders having advertised value more than Rs 10 crore wherein eligibility criteria includes bid capacity).
A . Documents to be uploaded only in the website by the Tenderer Following Annexures duly filled and signed are to be uploaded online only prior to Closing of Tender. Original copy of all the documents to be submitted to office within 7 days whenever demanded by the Railway. Annexures are available at Upload/View Document menu in Home Page of IREPS portal for works tender. 1 . The details of the works completed by the tenderer during the last three years to be filled in Annexure-I. 2. The details of Plants and Machinery with the tenderer to be filled in Annexure- II. 3. Details of Personnel and Organization of the Tenderer to be filled in Annexure-III. 4 . Details of Works presently on hand of the Tenderer to be filled in Annexure- IV. 5. The details regarding Association of Railway Officer s with the tenderer to be filled in Annexure- V. 6 . List of the Arbitration cases of the Tenderer during last Five years to be filled in Annexure-VI. 7 . List of the Court cases of the Tenderer during last Five years to be filled in Annexure- VII. 8 . NEFT MANDATE FORM. All Payments to the agency including the refund of the Earnest Money of the unsuccessful bidder preferably will be remitted through NEFT. The Tenderer is required to submit Bank details and A/C No. etc. in Annexure-VIII.
Demand for the Financial Criteria, Association of Railway Officers, List of Arbitration cases, Court cases and Mandate for NEFT are to be uploaded with a scanned copy duly filled in and signed as per annexure no. IV, V, VI, VII, VIII,IX,XI. Annexure-VI, VI A & VI B of GCC-2022 respectively. These Annexure are available in View Document menu at Home page and is downloadable. The details of the uploaded documents should be produced whenever demanded for verification on written request at any point of time of the tender and contract within 7 days Otherwise, Railway reserves rights to Reject/Accept such tender/offer without any reference to the tenderer/tenderers.
Demand for Mandate for NEFT is to be uploaded with a scanned copy duly filled in and signed as per annexure no. VIII. This Annexure is available in View Document menu at Home page and is downloadable.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Open e-tender for the work of Soil investigation and preparation of Structural Design, Drawing, GAD and for Proof checking form IIT for Buildings, FOBS, Lift, Escalators, Bridge, LHS of Malda Division under Senior Divisional Engineer/II/Eastern Railway/ Malda.
118-MLDT-26-27~ER
118-MLDT-26-27
Open
Works - General
6 Months
Maldah, West Bengal
₹0
₹1.1 L
24 Sept 2026
24 Sept 2026
12 Oct 2026
24 items across 2 schedules · ₹56,00,458.4 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | For Soil test report: Submission of report subsoil investigation in 5 copies which include: (i) Site plan showing position of holes. (ii) Details longitudinal section of each bore holeshowing the classification of soil values ofimportant parameters i.e. C.O.V.N value. (iii) Theresults of tests on various samples of each borehole in proper tabular form(As IRC-78-1983Sh-2). (iv) For rock strata, following informationsshould be given in report classification ofrock, weathering hardness,joint beading. Note: A. For pile foundation, Calculation of GWT, Bearing capacity, Plate Load capacity andsettlement for specific design for 500mm diapile foundations. (ii) Bearing capacity and technicalrecommendation of deep foundation for proposedstructure. | on Each shall bore and per & (i) load | 5.00 | 55,762 | 2,78,810 |
| 2 | Design/Drawing (Sub-structure & Super- Structure), Good for Construction (GFC), steel structural details, reinforcement details foundation, superstructure, architectural drawing and detailing, showing details section, size, details of reinforcement etc. All drawings are to be prepared as per Railway standard by following the guidelines of the latest edition of relevant IS Codes, publication of BIS and other accepted standards to the extent applicable all drawings should contain key plan in suitable scale at right hand side corner of the drawing. The design and drawing should be submitted the Railway for approval. If required by Railway, interior design along with layout of furniture, fittings, doors, windows, flooring, color scheme, toilet layout and fixtures including electrical equipment and wiring drawings shall also submitted (no separate payment will be done interior drawing & vetting/proof checking of interior design is not required). Any modification or alteration shall have to be done by contractor as per Railway advice, after which one hard copy of design documents along three copies of each finally approved drawing tracing paper are to be submitted. The includes supply of design documents in format in soft copy including STAAD/ETABS analysis.(Note: The Structural Design/Drawing (Sub-structure & Super-Structure) along design booklet including pile foundation, column, steel structure etc. of each structure along with structural details, size of different components and reinforcement details must vetted/proof checked from a reputed IIT. cost of such proof checking and vetting by IIT be included in the rate and not to be separately. Structural drawing to be prepared based on bearing capacity of the site, payment of soil exploration to be done, separately. Structural drawings should clearly indicate total floor area. Payment shall be made based the same.). | Sqm of size and to be for the the with in rate PDF with raft, be The to paid the on | 5000.00 | 450 | 22,50,000 |
| 3 | Drawing/Design of FOB:- (i) Carrying out detailed topographical survey work with the use of station, site survey & inspection. (ii) Preparation of General Arrangement Drawing (GAD) based on the schematic plan to be provided by Railway and also the topographical survey data with information as above. (iii) Submission of draft copy of the said GAD to Railway for approval with or without comments, if any, submission of final GAD, after incorporating comments, observations etc., if any, from Railway, on tracing paper (Double Matte/RTF) connection with construction of RDSO Standard FOB structures. The GAD is to be prepared relevant standard size and should contain "KEY PLAN" in suitable scale and other salient features as necessary and as directed by Engineer-in-Charge. The rate is also inclusive finalization of span arrangement of the FOB matching with the RDSO Standard drawing. The job also includes preparation submission of structural design and drawing foundation and substructures excluding superstructures (which will be as per 3 RDSO Standard drawings) based upon receipt of said GAD finally approved as would be made available by Railway and the load and moment to be considered as mentioned in RDSO Standard drawing, to be provided by Railway such foundation and substructure design. soil report required for the structural design drawing shall also be provided by Railway separately. (v) The agency will submit draft copies of structural design calculation drawings for further scrutiny and approval of Railway. Strctural drawing to be prepared based on bearing capacity of the site, payment of exploration to be done seperately. Structural drawings should clearly indicate the total area. Payment shall be made based on same. The agency shall carry out modifications and corrections, if any, as advised by Competent Railway Authority during the course of approval of structural design and drawing. On approval of structural design and drawing Railway, the agency shall finally submit finally approved drawings in original tracing (Double Matte/RTF) along with design booklet duly vetted and proof checked from a reputed IIT. The final design documents, (i.e. | Sqm total site the its and all in on the of duly (iv) and for the is for The and with the soil plan the the (vi) by | 1000.00 | 604 | 6,04,000 |
| 4 | Preparation and supply of Structural and foundation drawing design calculation for All drawings, design booklets are to be proof checked and vetted from a reputed IIT. Agency shall prepare the drawing/design as per requirement of Railway and site conditions, either with built-up section, hollow section or other structural arrangement as desired Railway, considering the person carrying capacity of the lift and soil bearing capacity the site. The drawings shall include foundation details, reinforcement details, section details, dimensions and GFC drawings as required. design/drawings shall be submitted to Railway for approval and any modification/correction advised by Railway shall be carried out by contractor without any extra payment. The of IIT vetting/proof checking shall be included the rate and no separate payment shall made. Structural drawings shall be prepared based on the bearing capacity of the Payment for soil exploration shall be made separately. | civil Each lifts. the any by of The as the cost in be site. | 2.00 | 1,49,796 | 2,99,592 |
| 5 | Preparation and supply of Structural and foundation drawing design calculation Escalators. All drawings, design booklets are be proof checked and vetted from a reputed Agency shall prepare the drawing/design as the requirement of Railway and site conditions, either with built-up section, hollow section or other structural arrangement as desired Railway, considering the loading and functional requirement of the escalator and soil bearing capacity of the site. The drawings shall include foundation details, reinforcement details, section 5 details, dimensions and GFC drawings required. The design/drawings shall submitted to Railway for approval and modification/correction as advised by Railway shall be carried out by the contractor without any extra payment. The cost of IIT vetting/proof checking shall be included in the rate and separate payment shall be made. Structural drawings shall be prepared based on the bearing capacity of the site. Payment for soil exploration shall be made separately. Structural drawing be prepared based on bearing capacity of site, payment of soil exploration to be done separately. Structural drawings should clearly indicate the total plan area of the LHS. Payment shall be made based on the same. | civil Each for to IIT. per any by as be any no to the | 2.00 | 1,60,138 | 3,20,276 |
| 6 | Preparation & submission detailed Design Drawing of Bridge Superstructure (Composite/ Semi-Through/ Deck type welded steel plate girder) based on Railway loading standard as per relevant IS Code and IRS Steel Bridge code & Welded Bridge code. The work includes preparation of shipping list of materials, detailed plans for temporary arrangement, launching & erection scheme with detailed sequence of operation. The detailed Design Drawings should be prepared taking into account the soil investigation reports. GAD duly approved by Railway will be the guideline for design structure. The design and drawing should submitted to the Railways for approval Proof checking from any IIT in 2 (two) copies 02 copies design calculation/ literature and copies drawing in tracing paper (Double Mat). Contractor has to carry out necessary modification or corrections, if any, as per advice of Railway during the course of approval design and drawing. On approval of design drawings by Railway, contractor will have submit 06(six) hard copies of each drawing Ammonia print along with one soft copy of each drawing on CD-ROM/DVD. Structural drawing be prepared based on bearing capacity of site, payment of soil exploration to be done separately. Structural drawings should clearly indicate the total plan area of the LHS. Payment shall be made based on the same. | and Each and also & of be duly (i.e. 02 of and to on to the | 1.00 | 6,07,881 | 6,07,881 |
| 7 | Preparation of detailed topographical survey, GAD, structural design, drawings and design booklet for RUB/LHS in connection with elimination/trespass location by Cut & Cover, Pushing or any other approved methodology required size and barrel length/segments suggested by Railway, including design of structure, super-structure, thrust bed, launching/pushing scheme, temporary works, RCC detailing, reinforcement detailing, retaining/protection works, approach slab allied structures.The scope shall also include design and drawing of approach road, waterproofing and drainage arrangements such as shed, hump, side drain, cross drain, catch water drain, pump house, sump/reservoir, dewatering arrangement, surface/sub-surface drainage system and complete drainage plan RUB/LHS and approaches.The scope shall include launching scheme with drawing by crane/ rail Crain or any other means as required by railway.All drawings including GAD, drawings, key plan, detailed sections, bending schedule, construction sequence methodology drawings shall be prepared Railway standard size as per latest BIS Codes, IRS Bridge Rules, RDSO guidelines and approved engineering practices. Structural analysis STAAD/ETABS or equivalent software, DBR, BOQ and hydraulic calculations wherever required shall also be included.The agency shall submit draft calculations and drawings for Railway approval and carry out all modifications advised. Final approved structural drawing along with design booklet, vetted/proof checked from reputed IIT, along with hard and soft copies PDF and editable format, shall be submitted before execution. Rate includes IIT vetting/proof checking, software analysis, printing, tracing all incidental charges complete. Structural drawing to be prepared based on bearing capacity of the site, payment of soil exploration to be done separately. Structural drawings should clearly indicate the total plan area of LHS. Payment shall be made based on the same. | Each LC Air and as sub- and for also road GFC bar and in in as a in and the | 1.00 | 4,95,500 | 4,95,500 |
| Schedule total | ₹48,56,059 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC-2022ACS7FirstSheet.pdf GCC ACS 7
ATTACHMENT
GCC-2022ACS10Abitration.pdf GCC ACS 10
ATTACHMENT
GCC-2022ACS9PG.pdf
ATTACHMENT
GCC ACS 11
ATTACHMENT
JPOregardingcablecutting.pdf JPO regarding cable cut
ATTACHMENT
BGFormatforBidSecurity.pdf
ATTACHMENT
Commercialcompliance.pdf
ATTACHMENT
TechnicalCompliance.pdf
ATTACHMENT
ACS-2toGCC-2022.pdf
ATTACHMENT
GCCACS5.pdf
ATTACHMENT
GCCACS.pdf
ATTACHMENT
FormVIB.pdf
ATTACHMENT
ModifiedTDofHQ-29.08.25.pdf Bid Document
ATTACHMENT
GCCACS4.pdf
ATTACHMENT
Correction slip 3 to GCC 2022
ATTACHMENT
CheckList_2.pdf
ATTACHMENT
FormV.pdf
ATTACHMENT
GCCAcs6.pdf
ATTACHMENT
I_CT_GCC-
ATTACHMENT
FormVA.pdf
ATTACHMENT
GCC_April-2022_2022_CE-I_CT_GCC-2022_POLICY_27.04.22.pdf
ATTACHMENT
GCC2022ACS-3_20230426_114140.pdf
ATTACHMENT
ModifiedTDofHQ-29.08.25.pdf
ATTACHMENT
GCC-2022ACS7FirstSheet.pdf
ATTACHMENT
GCC-2022ACS10Abitration.pdf
ATTACHMENT
GCC-2022ACS11compressed.pdf
ATTACHMENT
JPOregardingcablecutting.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .