REPAIR TO DRAIN, PATH, HARD STANDING AND FENCING OF NCO ACADEMY AT MIL STATION DHANA.

Amount

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and as directed.

M & L for brick work with sub class 'B' bricks, non-modular sizes as per IS 1077: 1992, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:4 complete all as specified and as directed.

Ditto all as per item No 2 above, but except bricks complete all as specified and as directed.

Material & Labour for walling of random rubble uncoursed, well bonded, bedded and solidly hearted built in CM 1:6, complete all as specified and as directed.

Ditto all as per item No 4 above but except stone complete all as specified and as directed.

Demolition of cement concrete(unreinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

M & L for cement concrete M15 (Nominal Mix) using 40 mm nominal size graded crushed stone aggregate as in surface channels and drains, complete all as specified and as directed.

Material & Labour for PCC 1:4:8 type D2 (using 40mm graded crushed stone aggregate) as in foundation, path and hard standing etc., complete all as specified and as directed.

M & L for cement concrete M15 (Nominal Mix) using 12.5 mm nominal size graded crushed stone aggregate in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs, slab staging for water tanks, filling of pressed steel door frame, fixing of hold fasts and the like including weathering, slightly rounded or chamfered angles and throating including necessary formworks complete all as specified and as directed.

Material & Labour for 100 mm thick Cement concrete work 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) as in pavement/ hardstanding finishing the surface concrete topping even and fair including use & waste of form work and and to divide the area in panels complete all as specified and as directed.

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade conforming to IS 15658: 2021 made by block making machine with strong vibratory compaction, of approved size, design & shape, cast in rubber mould, glossy finish of approved colour, laid in required colour and pattern, complete all as specified and as directed.

M & L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

Material & Labour for Outdoor meteor parking / path tiles 10 to 12 mm thick (square/ rectangular) area of each tiles not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including screed bed or bedding layer of mortar 20 mm thick for laying floor finishes with CM 1:6, complete all as specified and as directed.

M & L for 75 mm thick plain cement concrete M10 (Nominal Mix) using 40 mm nominal size graded stone aggregates, laid in alternate panel, surface finished even and smooth without using extra cement including filling in position with 80/25 industrial grade bitumen mix filler of proportion 80 kg of hot bitumen, 1 kg of cement and 0.25 cubic metre of coarse sand as in plinth protection all as specified and as directed.

Material & Labour for Precast designer coloured paver tiles (factory made rectified) of size 300mmx300mmx20mm, top layer glazed made in any type of cement and pigment, in required patterns (compressive strength not less than 250 Kg per Sqcm) as approved by GE in floor etc, set & jointed in neat cement slurry & pointed in white or coloured cement mixed with pigment to match over and including 15mm thick screed layer in cement mortar 1:4, complete all as specified & directed.

Taking down cement plaster on stone/brick/concrete surfaces including racking out joint, hacking for key, scrubbing down with water complete all as specified and as directed.

Material and labour for plastering 15 mm thick (in two coats of 10 mm and 5 mm thick) on fair faces of brick work or concrete surfaces (on vertical surfaces) in cement mortar 1:4 finished even and fair complete all as specified and as directed.

Material and labour for Racking out joints/ pointing in cement mortar on stone work in random rubble or polygonal rubble uncoursed or brought upto course, complete all as specified and as directed.

Material and labour for Keyed pointing in random or polygonal rubble stone masonry, uncoursed or brought upto course in CM 1:4, complete all as specified and as directed.

Dismantling of galvanised barbed wire of any description or in any position, complete all as specified and as directed.

Supply & Fix galvanised, 2 strands, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc., complete all as specified and directed.

Restraining resecuring of existing galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing’s and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc., complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and directed.

S & F hot rolled medium and high tensile structural steel of grade E165 as per IS 15911: 2010 as in framed work such as grills, grating, etc., with ends of bars of shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework water tanks and similar work complete all as specified and as directed.

Supply & Fix Mild steel angle iron fixed independently, without connecting plates etc as in fencing posts confirming to Fe 410 W (Gde E-250) quality-A etc., complete all as specified and directed.

Excavation in post holes each n. exc 0.50 cum, getting out, as in hard dense soil and removing the surplus soil n.exc 50 mtr distance etc., complete all as specified and directed.

Material & Labour for PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregates) as in filling mass concrete in hard standing, path, fencing post etc., complete all as specified and directed.

Supply & Fix Mild steel flat iron cut to length, bent to shape as required including hooking ends or welding ends, fixed independently in angle iron posts conforming to Fe-290 Gde E-165, complete all as specified and directed.

Supply & Fix 12 mm dia Mild screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed on both ends each screwed end to be fitted with washers and one hexagonal or square nut, but length of bolt exc 10cm but n exc 15cm long. , complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining blots, etc. including provision of binding wire, complete all as specified and directed.

Supply only Chain link MS galvanisd fencing, any size or type wieght n exc 4.00 kg per Sqm complete all as specified and directed.

Material & Labour for Mild steel/ TMT round bars 10mm dia and over cut to length, bent to shape required including cranking, bending as directed and to be fixed as in chain link fencing and confirming to Fe 410 W etc., complete all as specified and directed.

Preparation of newly or previously untreated steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed by Engineer-in-Charge.

M&L for Providing precast cement concrete louvres and jallies, 25mm thick (measured solid) type B0 (1:2:4) ( using 12.5 graded crushed stone aggregate) set in CM 1:4 fixed in repair, including all mouldings, complete all as specifid and directed.

Preparation of new plastered or un-plastered surfaces of wall and applying two coats of cement base paint on walls, complete all as specifid and directed.

Preparation of old plastered or unplastered surfaces including brooming down or steel wire brushing, scrapping down smokesoot, moulds, moss and efflorescent salts and trading oil greasy spots, and applying one coat of cement base paint on walls, complete all as specifid and directed.

Preparation of old painted steel surfaces of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed by Engineer-in-Charge.

NOTE :- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs 7,750.00 /- ]

m/s mahendra kumar khare contractor (BID ID -3080899)

M/S JAINENDRA KUMAR JAIN (BID ID -3070822)

siddhant construction (BID ID -3094621)

SUNIL KUMAR KORPAL (BID ID -3079725)

M/s DS Khekde (BID ID -3070957)