Construction of Road in Jai Shree Vihar Colony (A.No. 3368/825, 826 to 833, 845, 846, 848, 849, 850 mi, 851mi, 3452/850, 849, 850mi, 851mi, 3453/851 Rev. Village Titardi) 5601

Item Code [2023 17.29.4]:Item Type [RUIDP] :: Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths full round HDPE DWC (double wall corrugated) pipes of SN8 grade as per IS 16098 (Part 2) amended upto date in trenches in complete including all material, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications, drawings and as per direction of Engineer. Note : E/w to be measured and paid separately. Length of pipe shall be measured in between the outer wall of two manholes/Inspection chambers. Pipe in the manhole/inspection chamber’s wall shall deemed to be included in the item of manhole/inspection chamber shall not be payable. 300 mm ID

Item Code [2025 11.1]:Item Type [road] ::Earth work in excavation for structures as per drawing and MoRTH specifications Clause304.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. Sub Item Code [2025 11.1 + I(i)]: Earth work in excavation for structures as per drawing and MoRTH specifications Clause304.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. Ordinary soil Upto 3 m depth

Item Code [2025 11.4]:Item Type [road] ::Sub Item Code [2025 11.4 + I(i)]: Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and MoRTH specifications Clause 1702, 1703, 2102 & 2104 P.C.C grade M 10 Nominal mix 1:3:6

Item Code [2025 3.14]:Item Type [road] :: Construction of sub grade and earth enshoulders with approved material obtained from borrow pits with all lifts and leads , transporting to site, spreading, grading to requireds lope and compacted to meet requirement of Table 300 - 2 with lead up to 50 m as per MoRTH Specification Clause 305.3

Item Code [2025 PWD BSR 5.1]:Item Type [road] :: Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base (WBM/WMM) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per MoRTH Specification Clause 502

Item Code [2025 UNIFIED BSR 10.3]:Item Type [road] ::Sub Item Code [2025 UNIFIED BSR 10.3 + (i)]: Direction and Place Identification signs upto 0.9 sqm size board Retro-reflectorised Traffic Signs Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 801.3.1. fixed over aluminum sheeting, 2mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75x75x6mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450x450x600mm, 600mm below ground level as per approved drawing and MoRTH Specification Clause 801.

Item Code [2025 UNIFIED BSR 11.4]:Item Type [road] ::Sub Item Code [2025 UNIFIED BSR 11.4 + III (i)]: Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and MoRTH specifications Clause 1702, 1703, 2102 & 2104 P.C.C. grade M 20 Nominal mix (1:2:4)

Item Code [2025 UNIFIED BSR 11.4]:Item Type [road] :: Sub Item Code [2025 UNIFIED BSR 11.4 + V]: Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and MoRTH specifications Clause 1702, 1703, 2102 & 2104 R.C.C. grade M 25

Item Code [2025 UNIFIED BSR 16.41]:Item Type [road] ::Sub Item Code [2025 UNIFIED BSR 16.41 + 16.41.2]: Providing and fixing of Reinforced Ferrocement Drain cover designed for class "AA" loading duly marked on cover with adequate steel reinforcement having thickness 75 mmto150 mm anti-corrosive bitumen painted M.S. plate Rim and on M.S. lifting hooks admixture like plasticizer bond improving compound shrinkage resistance compound abrasion resistant complete as per approved design etc. for drain Opening Size 451 to 700 mm Standard Drain Cover Size 1000mm x 800mm x 100mm

Item Code [2025 UNIFIED BSR 3.5 (iii)]:Item Type [road] :: Excavation for road work in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and sides lopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per MoRTH Specification Clause 301.3