WBPHE/DIC/BMSD(D)/NIeT-03 of 2024-25/2

Amount

Supply and delivery at site of the following vertical multi stage pumping machinery and electrical accessories as per approved vendor list of PHED-

Supply and delivery installation of vertical multi stage Pump With pumping machinery directly coupled with water proof suitable size motor having following specification:- Pump: Duty condition -20 m3/hr, Head-36 Mtr, Shaft-stainless steel Impeller-S.S/GM. Outlet Size: 65mm/80mm., Motor: 5 HP 3 Ph, 50Hz, 415 Volt ± 10% 2900 RPM Motor must be suitable for operation with DOL Starter. (Test certificate along with characteristic curve should be submitted at the time of delivery). Model: Kirloskar ( KCIL 20-3)

Supply and delivery installation of 5 HP DOL starter for above mentioned pump (Relay range- 6A to 10A)

Supplying & laying of1.1KV grade 10 sq.mm3 core XLPE insulated Aluminium armoured cable conforming to IS 7098(Part-1) 1988, with upto date amendments

1.5mtr long 80mm dia UPVC standard type column pipe [cream color) with both side threaded and one end side socketed with registered KPMG

Laying of pipe line including cost of pipe & fittings of 180mm dia UPVC standard type column pipe [cream color) with both side threaded and one end side socketed with registered KPMG

80mm dia. CIDF Non-Raising Sluice Valves, PN 1.0 5.00 rating (Conforming to 15:14846) for delivery pipe line and wash out line. (MOC & TC needed for valve).

80mm dia. CIDF single door swing Non Return Valve, PN 1.0 rating (Conforming to 15:5312). (MOC & TC needed for valve).

2.5 inch/3 inch Enlarger/reducer for vertical mülti stage Pump to distribution line

80 mm dia CIDF 90°bend- 1no., CI/MS flanged short piece 0.50 mtr.-ino, CI/MS flanged pipe 1mtr.-1 no. etc (as per IS specification and certification registered) for construction

Supply and delivery of following fittings item for vertical multi stage pumping machinery and electrical accessories as per approved vendor list of PHED-

180 mm X 90 mm service saddle

MTA-90 mm

Tail Piece-90 mm

Tail Piece-160 mm

Tail Piece-250 mm

Flange-90 mm

Flange 160 mm

Flange-250 mm.

Coupler-180 mm

Coupler-200 mm

Reduce-180mm X 160 mm

150mm dial Pressure gauge (Range 0-7kg/cm³] with glycerine filling inside the dial including brass cock and fitting complete [This cost includes 15mm, dia G.l. pipes and specials)

Suitable Kiosk box for cable connection of vertical multi stage Pumpmotor set with degree of protection IP 65 including suitable legs and 6 Nos. Al. Bus bar for 32 Amps and all necessary earthing arrangement and insulator as per direction of EIC

Making CC foundation for support of the kiosk box after excavating the earth upto a depth of 0.6 Mtr below the GL including supply of all materials complete with 12 mm thick cement plastering with net cement finishing complete as per direction of EIC (size: 3' x 1' x 5').

Making earthing arrangement as per following -

Making earthing arrangement by supplying 5/8" dia earth spike of 2 mtr long with galvanized bolts, nuts and washer etc including supply and fitting fixing 8 SWG GI wire and restoring the surface duly rammed as per direction and inter connection with earth spike to continue running earth on the top of the PCC pole complete and testing as per satisfaction and direction of EIC.

Installation of vertical multi stage Pumping machinery to newly sunk tubewell along with column pipes (as required), top cover, valves, and specials of above with protection pipe and supply of MS clamp, nut bolt, cable gland socket etc, making inerconnection of the pump delivery line to pump collecting main line near tubewell with supply of all necceasary pipe, reducer/enlarger, GI/MS specials etc. including brick, sand, cement, rod etc and laying & drawing of all actuator cable & cable protection pipe as required and all to complete the job including all connection & testing commissioning as per direction of EIC

Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including moving, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary ming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm.

125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.

Making concrete slab for covering above equipment for protection of valves and pipes with 12mm thick plaster and net cement finish complete.

Transportation of above materials from vendor to site

Add GST @ 18%

Add Cess @ 1%

ORIENTAL ENGINEERING CO. (BID ID -5572578)

HINDOL ROY (BID ID -5592634)