PROVISION FOR DUTY SHED AND A SMALL INFORMATION KIOSK ALONG WITH PROVISION FOR BOREWELL ETC AT ATTRANJIKHERA DISTT ETAH

Amount

Earth work in excavation in all kind of soil by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. (Rate Including GST).

Providing and laying in position cement concrete 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). of specified grade excluding the cost of centering and shuttering. as per direction of Engineer- in-charge. (Rate Including GST).

Centering and shuttering for Foundations, footings, bases of columns, etc. for mass concrete including strutting, propping etc. and removal of form work. (Rate Including GST).

Centering and shuttering for Lintels, beams, plinth beams, girders, bressumers and cantilevers including strutting, propping etc. and removal of form work. (Rate Including GST).

Centering and shuttering for Columns, Pillars, Piers, Abutments, Posts and Struts including strutting, propping etc. and removal of form work. (Rate Including GST).

Centering and shuttering for Suspended floors, roofs, landings, balconies and access platform including strutting, propping etc. and removal of form work. (Rate Including GST).

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand). (Rate Including GST).

Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. (Rate Including GST).

Tile brick masonry with common burnt clay F.P.S. (non modular) tile bricks of class designation 10 in superstructure above plinth level up to floor V level in cement mortar 1:6 (1 cement : 6 coarse sand). (Rate Including GST).

Providing and laying in position specified grade of reinforced cement concrete, 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. (Rate Including GST).

Reinforced cement concrete work with 1:1.5:3 (1 cement: 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement. (Rate Including GST).

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (Rate Including GST).

Providing & Fixing Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. (Rate Including GST).

Providing and laying in position cement concrete of 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources specified grade excluding the cost of centering and shuttering - All work up to plinth level. (Rate Including GST).

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 coarse sand) as per direction of Engineer - in- charge. (Rate Including GST).

Providing and laying vitrified floor tiles size of 600 x 600 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. as per direction of Engineer-in-charge. (Rate Including GST).

Providing and laying rectified Glazed Ceramic tiles of size 300x300 mm or more size (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. (Rate Including GST).

Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete. as per manufacturer's specification.One or more coats on old work. (Rate Including GST).

Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T- iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. (Rate Including GST).

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer Using M.S. angels 40x40x6 mm for diagonal braces. (Rate Including GST).

P/F of 40 mm thick fine dressed redsand stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand), including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone including supply of all material , labour,T&P required required for proper completion of work. (Rate Including GST).

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite stone slab colour black, Cherry/Ruby red Area of slab over 0.50 sqm. (Rate Including GST).

P/F Sanatory and other articles required for execution of work complete. (Rate Including GST). 23-1-CPVC Pipe 15mm [RMT]

23-2-CPVC Elbow 1/2" [EACH]

23-3-CPVC Socket 1/2" [EACH]

23-4-CPVC T 1/2" [EACH]

23-5-T Brass G.I. 1/2 " [EACH]

23-6-CPVC Solvent 250g [EACH]

23-7-CPVC Cupler Blass 1/2 " [EACH]

23-8-Angle cock 1/2" [EACH]

23-9-PVC pipe 4" [RMT]

23-10-Elbow 4" [EACH]

23-11-N trap 4" [EACH]

23-12-PVC pipe 3" [RMT]

23-13-PVC T 3" [EACH]

23-14-PVC Elbow 3" [EACH]

23-15-PVC solvent 250g [EACH]

23-16-Clamp 1/2" 1pkt. [EACH]

23-17-Cera/ Hindware Indian Seat (510 x 400 mm, White) floor mound [EACH]

23-18-Flush cistern [EACH]

23-19-Granite top creamic wash basin [EACH]

23-20-Mirror with screw etc. complete [EACH]

23-21-Waste pipe [EACH]

23-22-wall mound bib cock cp brass [EACH]

23-23-Ceramic Floor Mounted European Water Closet/Western Toilet Commode/EWC S Trap with Slim Hydraulic Soft Close Seat Cover 54cm x35cmx41cm- White (Cera/Hindware) [EACH]

23-24-Ceramic Urinal Pot for Gents (White) [EACH]

23-25-Angle valve 1/2" [EACH]

23-26-PVC pipe 6' dia pressure rating - 6kgf/cm2 IS/ISO 9001 : 2008 [EACH]

23-27-PVC Elbow 6" [EACH]

23-28-PVC Socket 6" [EACH]

23-29-Plug [EACH]

23-30-Cera / hindware quarter Turn Fittings Pillar Cock long neck (Chrome Finish) [EACH]

23-31-Stainless Steel 5" Jali/Trap Floor Drain Grating for Tiolet Floor [EACH]

23-32-Triple layer water tank 500 ltr [EACH]

23-33-22"x 18 " Stainless steel 304 grade granite top sink for R.O plant [EACH]

23-34-Labor charges for fitting & small materials etc. [LS]

P/F Electric items required for execution of work complete. (Rate Including GST). 24-1-LED tube Light complete

24-2-PVC Elbow T socket 1" dai

24-3-PVC Pipe dia 3.00 m long

24-4-Copper wire 1.00 sq mm roll

24-5-Copper wire 1.50 sq mm roll

24-6-Copper wire 2.50 sq mm roll

24-7-6 Sq mm 2 Core Copper Armoured Cable

24-8-MCB 32 Amp.

24-9-Modular Switch 5 Amp

24-10-Modular Socket 5 Amp.

24-11-Modular Switch 15 Amp.

24-12-Modular Socket 15 Amp.

24-13-Ceiling Fan

24-14-Havells Ventil Air DX 200mm Exhaust Fan (White)

24-15-LED bulb 9 watt

24-16-Regulator for fan

24-17-Holder

24-18-Celling box

24-19-Screw 2 inch 144 nos in one box

24-20-Round sheet for fan box

24-21-Round sheet

24-22-MCB Box 6v.

24-24-6x4". Box with sheet complete

24-25-Junction box

24-26-casing patti 3.00 m long & 1.5"

24-28-Labour charges for fitting & small materials as gulli, juction, tape, button etc.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. (Rate Including GST).

Providing & fixing of red sand stone benches having 4 legs of size (0.26x0.26x0.45)m with simple moldings and 8cm thick red sand stone top size 1.50x0.60 m as per design and matching to the existing pattern at site. (Rate Including GST).

Provision for Purchase and installation at site of readymade Dustbins of Red Sand Stone of Cylindrical shape in single block having top molding and depression as per design on extra surface fully open top outer top dia 580mm and height 750mm of required shape & design. (Rate Including GST).

Provision for Solar Pump 2hp including 5" dia boring 80mm deep with starter for supply of water & fixing of 2 kwa solar panel for pump including CPVC pipe 4", casing pipe ,filter jali, boulders ,M.S clamp & supply of all electrical articles etc. (Rate Including GST).

Providing and laying non-pressure NP2 class (light duty) of 600 mm dia. R.C.C. pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete. (Rate Including GST).

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. (Rate Including GST).

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. (Rate Including GST).

Pointing on tile brick work with cement mortar 1:3 (1 cement : 3 fine sand):Flush/ Ruled/ Struck or weathered pointing. (Rate Including GST).

M/S HARISH SHARMA