As per NIeT Documents in connection with ganga Sagar Mela 2026

Amount

Dismantling of Telescopic type Tilting Mobile High Mast & find out the fault for proper operation at Sagar Mela Ground as per direction.

Supply & delivery of the following materials as per sample:-

6 SWG stranded steel rope

8 SWG stranded steel rope

Hard PVC Big Roller (dia -150mm, width/thickness-50mm, center hole dia-22mm)

MS shaft for above big roller(dia- 20mm, length-120mm with both end lock pin hole-3mm dia)

Long lock/ split pin

Medium Hard PVC roller (dia -150mm, width/thickness-60mm, center hole dia-22mm)

MS shaft for above roller(dia- 20mm, length-105mm with both end lock pin hole-3mm dia)

Medium lock/ split pin

Hard PVC small Roller (dia -40mm, length-40mm, center hole dia-12mm)

MS shaft for above small roller(dia- 10mm, length-80mm with both end lock pin hole-3mm dia)

Small lock/ split pin

Hard PVC small Roller type-2 (dia -40mm, length-30mm, center hole dia-12mm)

MS shaft for above roller(dia- 10mm, length-65mm with both end lock pin hole-3mm dia)

Small lock/ split pin type-2

6mm SWG wire "U" clamp

8mm SWG wire "U" clamp

MS pulley (dia-110mm, width-20mm, Central hole-20mm)

MS Shaft (dia- 19mm, length-80mm with both end lock pin hole-3mm dia)

Medium lock/ split pin

Cast aluminium pulley (dia-110mm,width-19mm, Central Hole-35mm)

Big size MS pulley (dia-125mm, width-20mm, Central hole-35mm)

MS shaft for above big pulley(dia-33mm, length-240mm with both end lock pin hole-3mm dia)

Medium lock/ split pin

7mm dia x 50mm long SS full threaded nut, bolt, flat washer, spring washer.

12mm dia x 50mm long SS full threaded nut, bolt, flat washer, spring washer.

20mm dia x 50mm long hexgonal headed SS full threaded nut, bolt, flat washer, spring washer.

750-16 tyre -tube-flap

750-16 wheel rim

2.5 sq.mm 3 core copper cable

Superior Quality Grease

Superior Quality gear oil

450mm x 450mmm x 6mm thick (Backlit board)

450mm x 600mm x 6mm thick (Backlit board)

4 sq.mm single core copper wire

2.5 sq.mm single core copper wire

150 amp connector

40 Amp TPN MCB

32 Amp TP MCB

16 Amp 3 phase 415 V reverse forward control switch (Make-L&T)

Re-assemblying of the High Mast by using the supplied materials as in item no-2 for proper operation of the system.

Dismantling of the 27 nos step motor from the unit, rewinding and connected with the high mast unit.

Dismantling of the 27 nos step motor from the unit, heat vernish and connected with the high mast unit.

Dismantling of the gearbox unit from the trolley

Cleaning ,Overhauling , greasing , lubricating of the inner spare of the gearbox unit includig dismantling part by part with reassembling the same all complete

Fitting-fixing of the gearbox unit to the trolley with proper allignment all complete

Fitting-fixing charges of the supplied MS hollow pipe to the balancing unit including welding, jointing , cleaning of rough surface , hiring of welding machine with welder-helper , cutting of damaged portion etc all complete

Making V type handle by providing 4" x 2" channel 16' long and 1 inch shaft of 2' long including welding, jointing , cleaning of rough surface , hiring of welding machine with welder-helper , cutting of damaged portion etc all complete

Testing & check up of the High Mast units by departmental supplied cable for proper operation of the system manual as well as electrical all complete as per direction of EIC.

Making internal Illumination of 42 Nos Departmental Bio Toilet Units by LED chain light and allied works at Ganga Sagar Mela Ground in connection with Ganga Sagar Mela -2026

Supply of decorative LED chain light for pole decoration on hire basis for 07-01-2026 to 16-01-2026

Supply of 2 x 2.5 sq. mm. and 1 x 1.5 sq. mm. PVC insulated single core copper wire for connection of chain light on hire basis

Supply of LED adaptor for the LED chain light as per direction

Supply of 10 AMP DPMCB with enclosure

Labour charges for installation of chain light arrangement for Bio Toilet Illumination with connection of DPMCB as per direction

Making one set of scaffolding only for repairing of 12 Mtr. high mast pole with fixtue with bamboo as main posts and ties fitting and fixing with necessary coir, nails etc. as per direction of the Engineer-incharge.

Taken out the existing LED flood light/ Street light luminaries from PHE stoe at Sagar by engaging personnel Including checking and fault finding as per direction. [255 Nos Fixture]

Supply, delivery and storage of the following materials at site as per sample:

240 Volt, 50 Hz AC, 100 watt Driver for 215 watt LED flood light luminaries [Make: Philips/ Havells/ Any approved]

240 Volt, 50 Hz AC, 75/80 watt Driver for 74 watt LED street light luminaries [Make: Philips/ Havells/ Any approved]

240 Volt, 50 Hz AC, 100 watt Driver for 100 watt LED street light luminaries [Make: Philips/ Havells/ Any approved]

100 watt LED panel with plate for 100 watt LED street light luminaries [Make: Philips/ Havells/ Any approved]

2.5 sq. mm. PVC insulated fiexible multistrand copper wire as per IS : 694 As Amended Up To Date [Make: Gloster/ Finolex/ Mescab/ Havells/ Any approved]

Repairing of the LED flood light/ Street light luminaries by engaging skilled personnel after dismantling the damaged parts and fixing of the newly supplied spares as including connection and testing complete.

Labour charges for detection of fault after disconnecting all power line & supply main line by using necessary metering instument all complete as per direction.

Supply & delivery of following spares for SL No-S/UKC/1911/208

Digital Voltmeter Make-Rishabh

Supply & delivery of following spares for SL No-S/IDE/1502/103

20 Amp DP MCB Make-ABB

Supply & delivery of following spares for SL No-S/IDE/1502/102

25 Amp Contactor Make-ABB

Supply & delivery of following spares for SL No-S/DE/1712/196

Relay 240V PLA

Supply & delivery of following spares for SL No-S/BIE/1701/162

Add On Block Make-ABB

Supply & delivery of following spares for SL No-S/SSE/1911/257

Relay 240V PLA

Supply & delivery of following spares for Ganga Sagar Extension panel

Add On Block Make-ABB

Supply & delivery of following spares for Ganga Sagar panel (PCE Projects Pvt Ltd)

Indicator (R ) Make-ABB

Supply & delivery of following spares for PH-3 of Chemaguri

25 Amp Contactor Make-ABB

Supply & delivery of following spares for PH-2 of Kamalpur Rudranagr Aug.

Digital clock timer Make-GIC

Supply & delivery of following spares for PH-3 of Manasadwip

18 Amp contactor Make-ABB

25 Amp contactor Make-ABB

Star Delta Timer Make-GIC

Digital Voltmeter Make-Rishabh

Add On Block Make-ABB

Supply & delivery of following spares for SL No-S/SPC/1911/256

Digital clock timer Make-GIC

16 Amp DP MCB Make-ABB

50 Amp Contactor Make-ABB

Supply & delivery of following spares for SL No-S/UKC/1911/208

Digital clock timer Make-GIC

Relay 240V PLA

25 Amp contactor Make-ABB

20 Amp DP MCB Make-ABB

Fitting fixing of the above panels by supplid materials to its original positions in the panels and making all power line connection & internal wiring of the panel & testing all complete as per direction of EIC.

Supply,delivery & Fixing 400/450mm dia 400 volt 50Hz AC Heavy duty Exhaust fan [Make-Havells/CG/Polar.[ For Generator Room of Urmimala Bungaow & Generator Building]

Nimpith Ashram

Withdrawing the Hand TW sets from the existing TW and carrying with stored at PHE Bunglow site store including loading and unloading as per direction

Transportation charges of Departmental 1 HP cora Pump with Column pipe etc from PHE Bunglow site store to Nimpith Asram including loading and unloading as per direction

Lowering the Departmental 1 HP cora Pump with Column pipe etc at the TW taken with all precaution all complete.

Labour charges for operation of the pumping machinery as and when required from 08-01-2026 to 16-01-2026

Withdrawing the Departmental cora pump with Column pipe etc from the existing TW and carrying back with stored at PHE Bunglow site store including loading and unloading as per direction after completation of Mela

Transportation charges of Withdrawn Hand TW from PHE Bunglow site store to Nimpith Asram including loading and unloading as per direction

Labour for laying soiling for placement of MTU at differentb points with departmental bricks including carriage of departmental bricks within a lead of 144 sq metres preparation of bed as necessary with brick joints properly filled in and packed with brick joints properly filled in and packed with local sand or powdered earth and including necessary cushion of similar materials below the soling (and in between layers when more than one layer is used) (The item included the cost of obtaining local sand or powdered carth) (a) Single brick flat soling (thickness 75 mm)

Hire charges for supply of bricks

Labour for withdrawing bricks that were laid at different places for placement of MTU.

Hiring charges for supplying of 7' x 5' wooden cot water packet collection from MTU at Ganga Sagar Mela Ground.

Supply & delivery of Silpaulin (Size-12' x 10')

Supply & delivery of 4 inch delivery pipe for waste water from MTU

Making necessary spout for intake water

Dismantling of the Diesel Pump set part by part for dewatering purpose by engaging skilled personel as per direction. [For Pond No-2 -2 Set & Pond No-1 & 3- 2 Set]

Supply, delivery and storage at site of XLD Mobil Oil 20W 40 of approved make [For Pond No-2 -18 Ltr & Pond No-1 & 3- 20 Ltr]

Repairing and overhauling water cooled diesel driven engine coupled with Pump set which includes servicing of fuel pump including supply and changing of Air filter, Diesi filter, Mobile filter. oil pile etc. as per direction of EIC. [For Pond No-2 -2 Set & Pond No-1 & 3- 2 Set]

Repairing of self starter, dyanamo etc. including rewinding complete as per direction of EIC. [For Pond No-2 -2 Set & Pond No-1 & 3- 2 Set]

Machining of the pump shaft including changing of bearing. packing etc. as per existing sample. [For Pond No-2 -2 Set & Pond No-1 & 3- 2 Set]

Reassembling of the Diesel engine with pump set after reparing as per direction of EIC. [For Pond No-2 -2 Set & Pond No-1 & 3- 2 Set]

ORIENTAL ENGINEERING CO. (BID ID -7366191)

MS BABUSONA ENTERPRISE (BID ID -7438515)