Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹23.0 LAccepted-AOC C O S 1 ESS GEE COMPLEX NEAR J K BANK SONAWAR BAZAR B B CANTT SRINAGAR 190004 J K | SRINAGAR | SRINAGAR | JAMMU AND KASHMIR | 190004 | L-1 | Accepted-AOC BEING L1 | |
| 2 | L-2₹24.4 L+₹24,660 (1.02%)Rejected-Finance R O KHREW TEH PAMPORE DISTT PULWAMA PIN 191103 J K | PULWAMA | JAMMU AND KASHMIR | 191103 | L-2 | Rejected-Finance L-2 | |
| 3 | L-3₹24.6 L+₹38,890 (1.61%)Rejected-Finance RAWALPORA WANABAL PATI YAYIL POST OFFICE SANAT NAGAR SRINAGAR 190005 J K | SRINAGAR | JAMMU AND KASHMIR | 190005 | L-3 | Rejected-Finance L-3 | |
| 4 | L-4₹24.7 L+₹52,240 (2.16%)Rejected-Finance | L-4 | Rejected-Finance L-4 | |
| 5 | L-5₹26.5 L+₹2.4 L (9.81%)Rejected-Finance | L-5 | Rejected-Finance L-5 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
20 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 861 EWS
GE 861 EWS c/o 56 APO
REPAIR TO DRAINS PCC PATH HARD STANDING FENCING SECURITY WALLS PARAPET WALLS AND ALLIED WORKS AT KHREW AND SHER E SHALI UNDER GE 861 EWS
2023_MES_592171_1
GE 861 EWS-15/2023-24
Open Tender
Civil Works
Item Rate
270 days
GE 861 EWS
As per tender documents
7 documents required · 7 mandatory
₹500
GE 861 EWS
₹90,000
Yes
13 Jul 2023
29 Apr 2023
27 May 2023
29 Apr 2023
20 May 2023
13 May 2023
Amount
Demolition of cement concrete in ground floor and paving not exc. 15cm thick, below or above ground level, complete all as specified and directed.
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.
Demolition reinforcement cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position, complete all as specified and directed.
Demolition cement concrete (unreinforced) of any description and in any position, not otherwise specially provided, complete all as specified and directed.
Taking down cement plaster from brick work or concrete or stone surfaces including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.
M&L for random rubble stone masonry uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6, complete all as specified and directed.
All as per Srl item No. 6.00 here-in-above but except stone.
M&L for flush pointing to random/squared rubble masonry in CM 1:3, complete all as specified and directed.
M&L for brick work with sub class 'B' (Old size bricks) straight or curved on plan exceeding 6 metre mean radius, built in cement mortar 1:6, complete all as specified and directed.
All as per Srl item No. 9.00 here-in-above but except bricks.
M&L for rendering 15mm thick in CM 1:4 on brick work or concrete surfaces, finished the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for rendering 15mm thick in CM 1:4 on stone masonry surfaces or surface other than fair faces of brick work, finished the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for 50mm thick PCC 1:3:6, type C-2 (using 40mm graded crushed stone aggregates) as in plinth protection, laid in alternate ways and including joints filling with sealing compound Grade "A", finished the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in grouting of angle iron posts, pillar, coping, plinth courses, parapets and raillings etc, including necessary form work, complete all as specified and directed.
M&L for PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in surface channels and drains, complete all as specified and directed.
M&L for precast reinforced cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in cover slab for MH / septic tank etc, set in CM 1:4 including necessary form work, complete all as specified and directed. Note :- Reinforcement shall be measured and paid seperately under respective items.
M&L for precast cement concrete, RCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in louvers and jallies, 40mm thick (measured solid) including precast pillars of size 125mm x 125mm in section all moulding, complete all as specified and directed.
M&L for RCC M-25 (Design Mix) as in beams, cantilevers, bressumers, lintels over 1.5 mtr clear span, beams supported on wall etc, complete all as specified and directed by Engr-in-charge.
M&L for RCC M-25 (Design Mix) as in slab supported on walls, beams and columns in floor, roofs, landings, balconies, canopies, deck slabs etc, complete all as specified and directed by Engr-in-charge.
Formwork to edges of rough finshed surfaces of concrete of flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 20cm wide, complete all as specified and directed by Engr-in-charge.
Formwork to edges of rough finshed surfaces of concrete of flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but not exc 20cm wide, complete all as specified and directed by Engr-in-charge.
Formwork to rough finished surfaces of soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed by Engr-in-charge.
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed by Engr-in-charge.
M&L for mild steel TMT bars 05mm dia and over, upto and including 10mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 10mm dia or securing with clips, complete all as specified and directed by Engr-in-charge.
Dismantling structural steel work including doors, gates, grills but framed truss etc, complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description, not otherwise provided for, complete all as specified and directed.
M&L for mild steel angle iron for post, struts in fencing including cutting tops to shape as required, drilling holes, notching for wire, including welding etc, confirming to Fe-290 Gde E-165, complete all as specified and directed.
M&L for mild steel framed work such as grills, gratings etc, with ends of bars shouldered and or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work, confirming to Fe-290 Gde E-165, complete all as specified and directed.
M&L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc, complete, drilled for fixing of steel sheeting or other covering doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete similar work, conforming to Fe-410-W (Gde-E-250) Quality-B, complete all as specified and directed.
S&F in repair/replacement galvanised 2 strand, steel barbed wire, 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc, complete all as specified and directed. Note :- Each line of wire to be measured.
M&L for 75mm thick PCC 1:3:6, type C-2 (using 40mm graded crushed stone aggregates) as in sub base, floor etc, finished the surface fair and even without using extra cement, complete all as specified and directed.
M&L for chequred cement concrete tiles, glossy finish of size 30cm x 30cm x 25mm thick with grey cement and pigment, set, jointed and pointed in neat cement slurry as in floors, laid over and including 15mm thick screed bed in CM 1:6, complete all as specified and directed.
M&L for 100mm thick PCC 1:2:4 type B-2 (using 40mm graded crushed stone aggregates) as in Hardstanding, sub base of floor, floor etc, complete all as specified and directed by Engr-in-Charge.
M&L for 60mm thick machine pressed precast concrete interlocking paver block of any shape and size, confirming to IS 15658-2006, M-35 Grade with grey cement and pigment, complete all as specified and directed.
All as per Ser item No 34.00 here-in-above but except tiles including dismantling of existing paver blocks in any position, complete all as directed by Engr-in-Charge.
M&L for sand filling under floors or in foundation or under paver block including watering and consolidation, complete all as specified and directed by Engr-in-Charge.
M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.
M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistance primer, complete all as specified and directed.
M&L for preparation of old plastered or unplastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed.
M/S SHEIKH FEROOZ AHMAD
FIRDOUS AHMAD BABA
M/S U.K. ENTERPRISES
M/S Hilal Builders
BHAT CONSTRUCTIONS AND BUILFERS
SAMEER CONSTRUCTIONS
M/S BASHIR AND SONS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .