Supply and Assembling of Furniture Items at 32nd BN SSB at Howly (1B) (Assam) and at 37th BN SSB at Managaldai (1B) (Assam)

BOQ and Specification

SECTION-A (OFFICE FURNITURE-SSB HOWLY)

Primary, Secondary Work Surface, Back Unit (Top Panel) Drawer fronts and Shutters etc. Size of Main Table (All

dimensions are in mm)

Softclosing access flap with in-build power box are provided on work surface for wire

management. Under Structure including Integrated pedestal and Back Unit sliding door should Size of

be made of made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade Secondary/Side/ERU/Return

Table (All dimensions are in

panels like side, bottom,back and shelves. Pedstal construction is BOX-BOX-FILE type which mm)

uses powder coated 400 MM long metal Panel Drawer Slides. Drawers should have a soft

closing & anti slam mechanism. Handles are provided for ease of opening. Pedestals are

provided with lock for security. The table shall have full modesty panel made of 18 mm thick Size of 3 Drawer Pedestal Unit 400(L)*450(D)*680(H) 400(L)*450(D)*680(H) 400(L)*450(D)*680(H) 400(L)*450(D)*680(H) 400(L)*470(D)*545(H)

MDF one side pre-laminate board confirming to IS-14587:1998. The table should have stiffners/ (All dimensions are in mm)

tie channels to maintain stability of the overall frame. The manufacturer should have the

following certification ISO 9001:2015,ISO 14001:2015,ISO 45001:2018,ISO 50001:2018, ISO Size of Back Storage Unit (All

37001:2016, ISO Greenguard and bidder should be member of IGBC. dimensions are in mm)

Primary, Secondary Work Surface, Back Unit (Top Panel) Drawer fronts and Shutters etc. Size of Main Table (All

dimensions are in mm)

Softclosing access flap with in-build power box are provided on work surface for wire

management. Under Structure including Integrated pedestal and Back Unit sliding door should Secondary/Side/ERU/Return

be made of made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade Table (All dimensions are in 1600(W)*500(D)*640(H) 1600(W)*500(D)*640(H) 1200(W)*470(D)*725(H) 1800(W)*500(D)*650(H) 1350(W)*500(D)*740(H)

confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping for body mm)

panels like side, bottom,back and shelves. Pedstal construction is BOX-BOX-FILE type which

uses powder coated 400 MM long metal Panel Drawer Slides. Drawers should have a soft Size of 3 Drawer Pedestal Unit 400(L)*450(D)*680(H) 400(L)*450(D)*680(H) 400(L)*450(D)*680(H) 400(L)*450(D)*680(H) 400(L)*470(D)*545(H)

closing & anti slam mechanism. Handles are provided for ease of opening. Pedestals are (All dimensions are in mm)

provided with lock for security. The table shall have modesty panel made of 18 mm thick MDF

one side pre-laminate board confirming to IS-14587:1998. The table should have stiffners/ tie

channels to maintain stability of the overall frame. The manufacturer should have the following

certification ISO 9001:2015,ISO 14001:2015. The manufacturer should have the following

certification ISO 9001:2015,ISO 14001:2015,ISO 45001:2018,ISO 50001:2018, ISO

37001:2016, ISO Greenguard and bidder should be member of IGBC.

Seat/Back Assembly: The Cushioned seat assembly consists of seat outer (material 30% Glass Fiber

Nylon) & upholstered Seat inner ( material - poly propylene) with moulded polyurethane foam &

polyster fabric. The net Back is made up of back outer (material - Glass Fiber filled Nylon ) Back inner

(material -PP) and upholstered using Polyester Mesh fabric with high tenacity yam. Full Back size:

46.5cm W x 60.0cm H, Seat Size: 51.0cm W x 49.0cm D. High Resilience (HR) polyurethane foam: The

HR polyurethane foam is moulded with density 45 +/-2 kg/m3 amd Hardness load 12+/- 2 kg as per IS :

7888 for 25% compression. The armrest is having two adjustment , Height (6.0±0.5cm) and Depth

(6.0±0.5cm) . Height is provided in aluminium structure of armrest which is connected to Aluminium Back

spin and is operated bu botton. The depth adjustment is provided in pad which is fixed to armrest

structure. Armrest top is made of PU molded over plastic over plastic inner. Active Bio-synchro

Mechanism : The adjustable tilting mechanism is designed with the following features: 360° revolving

type, Front - pivot for tilt with feet resting on ground & continious lumber ensuring more comfort, Tilt

tension Adjustment can be operated in seating position, 5 position tilt limiter giving option of variable tilt

angel to the chair, Seat/ back tilt ratio of 1:2, The mechanism housing is made up of HPDC Aluminium &

back powder coated (DEF 40 to 60 micron) , The neckrest assembly consist ou upholstered Neckrest

inner with moulded poluutertane foam & polyster fabric, upholstered inner is fixed to neckrest

cover.Neckrest is fixedto back assembly through neckrest spin. height adjustment of 505± 0.5cm. and

rotation adjustment of overall 20°± 2° , Pedestal is high pressure Die cast polish aluminium and fitted

with 5 nos. Twin wheel castors. Make: Godrej. The manufacturer should have the following certification

ISO 9001:2015,ISO 14001:2015. The manufacturer should have the following certification ISO

Digitally signed by

AVANISH AVANISH KUMAR

4 Midback Chair with Headrest 8 Name of Model UGS-010 Pulse Quip Opus HB Adapt

The Seat is made up of 1.2±0.1 cm thk. Hot pressed plywood measured as per QA method.The Back

should be made up of injection moulded glass filled nylon & upholstered using net fabric with high

tenacity yarn. Seat size shoul be: 47 cm Wx49.5cm D, Back Size: 45 cm Wx65.3 cm H. It should have

High resilence polyurethane foam moulded with density=55±2kg/m3 and hardness 16±2 kgf as per

IS:7888 for 25% compression. The armrest should have an Up-Down adjustment of 8.5±0.5cm which

should be provided in armrest structure. Armrest Top should have an integrated layer of Thermoplasti

Elastometer(TPE). The chiar should have Lumbar support assembly consisting of polypropylene pad

with moulded polyurethane foam and covered with polyester fabric. The height of lumbar pad should be

adjustable with an adjustment of 8±0.5cm in height.Chair should have Front Pivot Synchro Mechanism

with Following Features: 360 degree revolving type,Single point Control, front-pivot for tilt with feet

resting on ground for comfort, tilt Tension adjustment, 4- position locking with anti shock feature, Proposed mage

seat/back tilting ratio of 1:2. The neck rest assembly should consist of polypropylene pad with moulded

polyurethane foam & covered with polyester fabric. Neckrest should be fixed to back assembly through

neckrest connector.Neckrest assembly should have height adjustment of 4.2±0.5cm and rotation

adjustment of overall 76 degree±2 degree. The chair should have pneumatic height adjustment with an

adjustment stroke of 10±0.3 cm. Pedestal assembly should be injection moulded in black 30% glass

filled nylon and fitted with 5 Nos. twin wheel castors. The pedestal pitch-centre dia should be

Ø66.1±0.5cm. It should also have twin wheel castors injection moulded in black nylon.Overall Size: 76.1

cm Wx76.1cmD x 114cm-128.2 cm H x 44-54 cm Seat Height. The manufacturer should have the

following certification ISO 9001:2015,ISO 14001:2015, The manufacturer should have the following

certification ISO 9001:2015,ISO 14001:2015,ISO 45001:2018,ISO 50001:2018, ISO 37001:2016, ISO

The seat and back should be made up of seasoned wood and plywood uholstered with black synthetic

leather and polyurethane foam.The back and seat size should be 46cm x 27cm and 46 cm x 40 cm

respectively.The armrest tube should be made up of Ø 2.54 ± 0.03 cm x 0.2 ± 0.016 cm thick M.S.

E.R.W tube and powder caoted. Armrest should be gas assisted injection moulded from black

polypropylene. The understructure assembly should be cantilever type frame made of Ø 2.54 ± 0.03 cm

x 0.2 ± 0.016 cm thick M.S. E.R.W tube and powder coated. The manufacturer should have the

following certification ISO 9001:2015,ISO 14001:2015. The manufacturer should have the following

certification ISO 9001:2015,ISO 14001:2015,ISO 45001:2018,ISO 50001:2018, ISO 37001:2016, ISO

Greenguard and bidder should be member of IGBC. Proposed mage

Should be made of minimum 25mm thick MDF one side prelaminate board conforming to

IS14587: 1998 and having chamfered edge. Plastic ABS access flap should be provided for

easy access to wires and cables. The Under-structure consists of mixture of 25mm and 18mm

Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990,

Edge banded with matching 2 mm thick PVC lipping. Aluminium alloy 63400 - WP profile is used

for connecting panels together. Made of 18mm Thick Pre-laminated twin board of E1-P2 grade

and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC

lipping. Powder coated accent metal strip provided below work surface to enhance aesthetics. It Proposed mage

is made of 0.8mm CRCA as per IS 513,epoxy polyester powder coated (DFT 40-60 microns). An

array of panels made of 0.8mm CRCA MS IS:513, epoxy polyester powder coated (DFT 40-60

microns) should be used for flow of wires and cables. Provision to mount 6 module plate should

be provided below worktop. Cutout on top with two piece injection moulded plastic part polymer

component should be fitted to pullout audio,video cables onto worktop and connect devices

charger to power socket below worktop. Manufacturer should be certified with ISO18001, ISO

9001, ISO 14001 . The manufacturer should have the following certification ISO 9001:2015,ISO

The seat is made up of 1.2±0.1cm thick hot pressed plywood and upholstered with fabric or

synthetic leather and moulded Polyurethane foam.the back is made up 1.2±0.1cm thick hot

pressed plywood upholstered with replaceable fabric or synthetic leather upholstery covers and

mouldedp polyurethane foam.The back ply and foam is designed with contoured lumber support

for comfortable seating posture.Back size:48cm(W) x 76 cm(H),seat size : 51cm(W) x

48cm(D).The high resilience polyurethane foam for seat and back with density 45±2kg/m³ and

hardness load16±2 kgf as per IS:7888 for 25% compression.The armrest top is made of moulded

polyurethane and mounted on to a fixed type tubular . The seat and back are arrested together with

fixed type spine without adjustment made of 0.8mm cm thick HR Steel. The pneumatic height

adjustment has an adjustment of 9.0±0.3cm.The pedestal is fabricated from 0.2±0.02cm thick high

resilience sheet(IS:DD 1079/HR skin pass),chrome plated and assembled with injection moulded black

polypropylene hub cap and 5 nos. Twin wheel castors.The pedestal is 66.0±0.05cm.Pitch center dia

(76.0±1.0cm with castors).The twin wheel castors are injection moulded in black nylon.The manufacturer

should have the following certification ISO 9001:2015,ISO 14001:2015,ISO 45001:2018,ISO

50001:2018, ISO 37001:2016, ISO Greenguard and bidder should be member of IGBC.

The seat is made up of 1.2±0.1cm thick hot pressed plywood and upholstered with fabric or

synthetic leather and moulded Polyurethane foam.the back is made up 1.2±0.1cm thick hot

pressed plywood upholstered with replaceable fabric or synthetic leather upholstery covers and

mouldedp polyurethane foam.The back ply and foam is designed with contoured lumber support

for comfortable seating posture.Back size:48cm(W) x 64.5 cm(H),seat size : 51cm(W) x

48cm(D).The high resilience polyurethane foam for seat and back with density 45±2kg/m³ and

hardness load16±2 kgf as per IS:7888 for 25% compression.The armrest top is made of moulded Proposed mage

polyurethane and mounted on to a fixed type tubular . The seat and back are arrested together with

fixed type spine without adjustment made of 0.8mm cm thick HR Steel. The pneumatic height

adjustment has an adjustment of 9.0±0.3cm.The pedestal is fabricated from 0.2±0.02cm thick high

resilience sheet(IS:DD 1079/HR skin pass),chrome plated and assembled with injection moulded black

polypropylene hub cap and 5 nos. Twin wheel castors.The pedestal is 66.0±0.05cm.Pitch center dia

(76.0±1.0cm with castors).The twin wheel castors are injection moulded in black nylon.The manufacturer

should be having certifications like; ISO. The manufacturer should have the following certification ISO

9001:2015,ISO 14001:2015,ISO 45001:2018,ISO 50001:2018, ISO 37001:2016, ISO Greenguard and

Main Table, Side Table & Hinge Door Unit should be made of 25mm thick plain particle board

(PPB) clad with 0.6mm thick post formed laminate and 1 mm thick backing laminate (BDL). Flat

Edge duly sealed with 2 mm thick PVC Beading The size of the main table should be 1650 x

900 x 740, Size of Side Unit Should be 1550 x 450 x 705 , SIze of Hinge Door UNit Should

be1280 x 425 x 705. The manufacturer should have the following certification ISO

9001:2015,ISO 14001:2015. The manufacturer should have the following certification ISO Proposed mage

Greenguard and bidder should be member of IGBC.

Chair should have pneumatic seat height adjustment facility. Height of the chair should be

atleast 97cm. Depth and width of the chair should be at least 76cm. Seat height should be at

least 54cm.Back size-47.5cmWx58cmH. The seat and back should be made up of 1.2±0.1 cm

thick hot pressed plywood upholstered with fabric upholstery cover and moulded polyurethane

foam .The back Foam should be designed with countered lumbar support for extra comfort. The

High resilience polyurethane Foam should be moulded with density=45±2kg/m3 and hardness

load 16±2 kgf. The armrest should be injection moulded from black Co polymer polprylene. It Proposed mage

should have centre tilt mechanism with tilt tension adjustment, upright position locking, 360

degree revolving and seat back tilting ratio should be 1:3.The pedestal should be injection

moulded in black 33% glass filled Nylon-66. The pedestal should also have 5 nos twin wheel

castor. The manufacturer should have the following certification ISO 9001:2015,ISO

14001:2015. The manufacturer should have the following certification ISO 9001:2015,ISO

14001:2015,ISO 45001:2018,ISO 50001:2018, ISO 37001:2016, ISO Greenguard and bidder

It should be a smaller dimension which fits in living room with relative ease. The sofa needs to

be compact with simple design that provides good comfort and convenience. It needs to have a

ompactness that ensures efficient space management in your home and accommodates

everyone comfortably. It should have a rubber wood fascia and a contour armrest that adds the

elegance of the sofa. Dimension of 3 seater sofa should be 1340W*870D*780H andof 1 seater

Sofa should be 920mmW* 870mmD* 780mmH. Upholstery should be made of PVC. Frame

material should be Tropical Solid Wood joined by means of Proposed mage

hardened steel screws and steel bolts, as well as glue. Seat foam should be Slab stock foam

along with recron sheet, Foam Density : 17 kg/ cubic cm. Back foam should be Slab stock foam

with recron fill, Foam Density : 17 kg/cubic cm. S-spring with cross menbrane webding.The

manufacturer should have the following certification ISO 9001:2015,ISO 14001:2015. The

manufacturer should have the following certification ISO 9001:2015,ISO 14001:2015,ISO

45001:2018,ISO 50001:2018, ISO 37001:2016, ISO Greenguard and bidder should be member

• Material : Fabric

• Thickness : 1 mm

• Breaking Load (N) : Warp 1327

• Elongation at break (%) : Warp 27.5

• Colour Fastness to Rubbing (Dry/Wet) (scale 1- 5) :

Dry = 4 Wet = 4

• Material : Combination of plywood and pine Wood

• Plywood thickness : 12 mm (moisture resistance and termite free)

• Pinewood cross section ( without knots)

• Moisture content : 10 -12 %

• Material : Slab stock foam

• Density : Base 28 kg/m3 and super soft 32 kg/m3 at top

Pocket spring of diameter 2 mm is emebdded in seat

• Material : Slab stock foam of density 28 kg/cubic m is pasted on back.

• The front of the backrest is made of loose conjugated polyester fibre

• 3 mm MDF board

Legs : Rubber wood .

Facia : Membrane pressed on MDF

Size of 1 seater :95cm W*95cm D*95cm H, size of 2 seater 149cmW, 95cm H, 95cm H.

The manufacturer should have the following certification ISO 9001:2015,ISO 14001:2015,ISO

45001:2018,ISO 50001:2018, ISO 37001:2016, ISO Greenguard and bidder should be member of

Coffee Table 12 Name of Model UCT-005 Victoria Trent Centre Table Ambassador

Providing and Supplying Wooden Centre Table 1200mm L x 600mm D x 450mm Ht made of

Solid Wood Structure. The Wood is 50 mm thick and 150mm in Width. The Wooden Structure is

finished in Melamine polish. The manufacturer should have the following certification ISO

Greenguard and bidder should be member of IGBC. Proposed mage

Computer Chair: Godrej Model: Regale: The seat and back are made up of black injection moulded com

polymer polypropylene. The contoured back is designed with integral cuout for easy handling of the

chair. Seat Size: 48.5 cm ( W) x 29.0cm (H) . The frame understucture is made of powder coated (DFT

40-60 micron) made of MS ERW OBLONG tube and welded connected tube made up of MS ERW

Square tube . The manufacturer should have the following certification ISO 9001:2015,ISO

14001:2015,ISO 45001:2018,ISO 50001:2018, ISO 37001:2016, ISO Greenguard and bidder should be Proposed mage

member of IGBC.

a. Size per Penta workstation:Main Table 1350mm*1350mmW with 600mm height: 1200 mm.

b. Each workstation to be provided with Mobile pedestal (2 Drawer and one filing Cabinet) [Size: 400mm

(W) x 560mm (D) x 560mm (H)], Keyboard pull-out tray and CPU trolley

c. Panel thickness: Main Panel 52.4 mm

d. Panel components:

i. 2 nos of vertical extrusion made of aluminum and coated with epoxy powder coating.

ii. Horizontal extrusions made of aluminum and coated with epoxy powder coating at every division of

iii. Blocks made from composite construction of MDF and paper honeycomb.

iv. One no. of fabricated bottom frame (comprising of L-channels, formed plates and steel tube welded

together and coated with epoxy powder coating) as a welded structure of steel component.

v. 1 nos of Plain metal bottom tiles made of 0.8mm thick MS CRCA Grade D as per IS: 513

vi. 2 nos of Pre-laminated intermediate tiles made of 9.0 to 9.5 mm thick pre-laminated particle board

conforming to IS: 12823 having all its edges with minimum 0.5 mm thick PVC edging

vii. 1 nos of Fabric magnetic top tiles (fabric upholstered metal tiles in 0.6 mm thick G.I. Grade O as per

IS: 277. The fabric upholstered with adhesives)

viii. 1 no of top trim made of aluminum extrusion. Proposed mage

ix. Cover Trims and end trims.

x. Joinery post made of aluminum extrusion having average wall thickness of 1.2mm and coated with

epoxy powder coating.

x. Die Cast Caps (made of aluminium alloy having average wall thickness of 1.2 mm and coated with

epoxy powder coating) to cover exposed top edge of Panel at junctions and ends. Panels are to be

supported on Double side legs (fabricated by CO2 welded MS Tube with the MS base plate) with

e. Work surface: Made of 25 mm thick pre-laminated particle board having all its edges with minimum 2

mm thick PVC edge banding. The work surface shall be provided with circular cut out of 0.65mm

diameter as per the requirement, for passing of wires. These cut outs shall be provided with ABS covers.

f. Brackets providing support for work surface:

i. Work surface Bracket mounted on to the Horizontal extrusion and made from 2.0 mm thick CRCA

grade D steel as per IS: 513-19. All the work surface are mounted on the work surface through round

Philip head diameter 4 mm x 19 length having finish zinc plated blue.

ii. Holder Bracket made from 2.0 mm thick CRCA grade D steel as per IS:513-19, slid in between end

trim and vertical extrusion and mounted on work surface. The manufacturer should have the following

certification ISO 9001:2015,ISO 14001:2015,ISO 45001:2018,ISO 50001:2018, ISO 37001:2016, ISO

Big size almirahof 916mm W x 486mm D x 1981mm H made of 0.7mm thick CRCA MS epoxy

powder coated with welded construction. The almirah should have 4 adjustable shalves made

with 0.8mm thick CRCA MS. The doors should be metal door made with0.8mm thick CRCA MS

having mozac handles with m10 screw type leaver. The manufacturer should have the following

certification ISO 9001:2015,ISO 14001:2015, The manufacturer should have the following

certification ISO 9001:2015,ISO 14001:2015,ISO 45001:2018,ISO 50001:2018, ISO

37001:2016, ISO Greenguard and bidder should be member of IGBC.

4 Door book case of size: 1742mm H x 914mm W x 320mm D, made of made of 0.7mm thick

CRCA MS epoxy powder coated with knock down construction. Each door should have 6 leaver

cam lock with common key. Each door should have 3mm thick glass for clear inside vission

secure in metal frame through rubber gasket. The manufacturer should have the following

certification ISO 9001:2015,ISO 14001:2015, The manufacturer should have the following

certification ISO 9001:2015,ISO 14001:2015,ISO 45001:2018,ISO 50001:2018, ISO

37001:2016, ISO Greenguard and bidder should be member of IGBC. Proposed mage

Table size should be (3000mmW*1150mmW*740mm). Worktop Should be Made of 25mm

Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-

12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access panels provided with

soft closing hinges, Under structure The Under-structure should consist of mixture of 25mm and

18mm Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-

12823:1990, Edge banded with matching 2 mm thick PVC lipping. Anodised aluminium alloy

63400 - WP profile is added at bottom edges for improving the aesthetics. The product has a

knock-down construction. A wire raise should made of 0.8mm CRCA MS IS:513. It is epoxy

polyester powder coated (DFT 40-60 microns) for flow of wires and cables. Cutout provision

below Access flap at two locations for standard 8 module Anchor Roma is provided. Beside

each cutout, an additional cutout with plate is provided for mounting Audio Visual Cables

(eg.HDMI,VGA-A,etc). The manufacturer should have the following certification ISO Proposed mage

Greenguard and bidder should be member of IGBC.

3 Seater Sturdy Perforated Metal Bench with cushion made up of CRCA and duly textured

Powder Coated to the thickness of 60-80 Micron. Seat, Arms & Legs: 1.2MM Thick High quality

cold-rolled steel is perforated, pressed and welded to form the shape, Center Beam: 2MM Thick

High Quality cold-rolled steel is pressed and welded to form the shape, the surface is treated to

avoid rust. The product must be from a Manufacturer having ISO 9001,ISO 14001. The

manufacturer should have the following certification ISO 9001:2015,ISO 14001:2015,ISO

45001:2018,ISO 50001:2018, ISO 37001:2016, ISO Greenguard and bidder should be member

High chair seat nd back should be made up of injection moulded high impact strength

Seat Size (All dimensions are

polypropylene compound with indoor grade UV resistance. Understructure should be Powder 52.5(W)*53.2(D) 52.5(W)*53.2(D) 50(W)*50(D) 46 (W)*53.3(D)

coated MS ERW Tube legs and footrest. The manufacturer should have the following

certification ISO 9001:2015,ISO 14001:2015. The manufacturer should have the following Back Size (All dimensions are

37001:2016, ISO Greenguard and bidder should be member of IGBC. Seat height (All dimensions

Footrest height (All dimensions

Overall height (All dimensions

Bed Structure Consists of Metal frames made of MS25mm Sq Pipes in 1.2 mm thickness and Size (All dimensions are in

MS Channels in 1.0mm Thickness. Bottom Panels and tailboard made of 25mm thick particle mm) 2100 (L)*1950(W)*1050(H) 2108 (L)*1895(W)*1133(H) 2040 (L)*1600(W)*750(H)

board. Headboard is 25mm PU painted MDF. Sideboards made of 18mm thick particle board.

The manufacturer should have the following certification ISO 9001:2015,ISO 14001:2015,ISO

45001:2018,ISO 50001:2018, ISO 37001:2016, ISO Greenguard and bidder should be member

Bed Structure consist of metal frames made of M.S. Channels in 1.0 mm Thickness.

Horizontal plinths and bottom plinth are made of 25 mm Thick Prelaminated Particle Board. Size (All dimensions are in

Head board is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil mm)

wrapped decorative trims fixed to it.

Tail board is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil

wrapped decorative trims fixed to it.

Side rail is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped

decorative trims fixed on to it.

Mattress panels of Bed are made of 18 mm thick Prelaminated Particle Board with all the

exposed edges are edge banded with 0.8 mm thick PVC edge banding. The manufacturer

should have the following certification ISO 9001:2015,ISO 14001:2015,ISO 45001:2018,ISO Proposed mage

50001:2018, ISO 37001:2016, ISO Greenguard and bidder should be member of IGBC.

Mattress for Double Bed (78inch*72inch*4inch)

Thickness 10 cm

The complete foam quilted mattress gives you highly desirable comfort

The soft foam quilting provides the perfect amount of cushion contouring in

conjunction with providing proper firm support

The stitched bonded fabric provides excellent tear resistance and performance. The

manufacturer should have the following certification ISO 9001:2015,ISO 14001:2015,ISO

45001:2018,ISO 50001:2018, ISO 37001:2016, ISO Greenguard and bidder should be member

Mattress for SIngle Bed (78inch*36inch*4inch)

Thickness 10 cm

The complete foam quilted mattress gives you highly desirable comfort

The soft foam quilting provides the perfect amount of cushion contouring in

conjunction with providing proper firm support

The stitched bonded fabric provides excellent tear resistance and performance. The

manufacturer should have the following certification ISO 9001:2015,ISO 14001:2015,ISO

45001:2018,ISO 50001:2018, ISO 37001:2016, ISO Greenguard and bidder should be member

Table SIZE: L1500 W900 H757 T37MM, TOP: 19mm MDF board with okume veneer, LEGS:

720 x 103 x 20 solid wood, Chair SIZE: W430 H933 D565 SH480 MM, Solid wood frame, PVC

Monterry upholstery. The manufacturer should have the following certification ISO

Greenguard and bidder should be member of IGBC.

Dresser table in the suite room should be of 461mmD*460mmW*1710mmH. Panels of dressing

tables should be made of 18mm thick prelaminated particle board. All the exposed edges

should be edge banded with 0.8mm thick PVC edge banding. Drawer front and Door should be

made of 18mm thick prelaminated Particle board. Mirror panel should be made of 18mm thick

particle board with 4mm thick mirror fixed to it. supporting pipe used for fixing the mirror frame

should be made of MS square pipe of thickness 1.2 mm. Construction should be knock down.

18mm thick prelaminated particle board should be in iperial oak shade . The manufacturer

should have the following certification ISO 9001:2015,ISO 14001:2015,ISO 45001:2018,ISO

50001:2018, ISO 37001:2016, ISO Greenguard and bidder should be member of IGBC.

SECTION-B (II) (HOME FURNITURE-SSB MANGALDAI)

Size (All dimensions are in

Bed structure should consist of MS frames of MS 25mm square pipes in 1.2mm thickness and

MS channels in 1mm thickness. Partition panels and plinths are made of 25mm thick

prelaminated particle board. Headboard and Tailboard are made of 25mm thick PVC membrane

pressed MDF. Side Board, Mattress Panels and drawer panels should be made of 18mm thick

prelaminated particle board with all exposed edges are edge banded with 2 mm thick pvc edge

banding. The manufacturer should have the following certification ISO 9001:2015,ISO Proposed mage

14001:2015,ISO 45001:2018,ISO 50001:2018, ISO 37001:2016, ISO Greenguard and bidder

should be member of IGBC.

Size (All dimensions are in

All body panels should be 18mm prelaminated particle board with all exposed edges banded

with 2 mmPVC edge banding. Door panel should be made of 18mm PVC membrae pressed

MDF. Mirror should be fixed. Drawer front should be 18mm thick PVC membrane pressed MDF.

Drawer bottom should be 9 mm thick particle board. The manufacturer should have the

following certification ISO 9001:2015,ISO 14001:2015,ISO 45001:2018,ISO 50001:2018, ISO

37001:2016, ISO Greenguard and bidder should be member of IGBC.

Size (All dimensions are in

Bedside table should be Top panels and drawer front should be 18mm thick PVC Membrane

pressed MDF. Body and drawer panelsshould be 18mm thick prelaminated particle board with

2 mm thick pvc edge banding in all exposed edges.The manufacturer should have the following

certification ISO 9001:2015,ISO 14001:2015,ISO 45001:2018,ISO 50001:2018, ISO

37001:2016, ISO Greenguard and bidder should be member of IGBC. Proposed mage

4 Door Wardrobe with Mirror 1 Name of Model UDT-002 Chocolate 4 Door Wardrobe with Mirror Pioneer 8WM Keril -3 Door Wardrobe with Mirror

Size (All dimensions are in

All body panels should be 18mm prelaminated particle board with all exposed edges banded

with 2 mmPVC edge banding. Door panel should be made of 18mm prelaminated particle

board. Body Back should be 18mm thick particle board. Should be provided with Mirror. The

manufacturer should have the following certification ISO 9001:2015,ISO 14001:2015,ISO

45001:2018,ISO 50001:2018, ISO 37001:2016, ISO Greenguard and bidder should be member Proposed mage

Size (All dimensions are in

Body panels are made of 18 mm thick Prelaminated Particle Board.All the exposed edges are

edge banded with 2 mm thick PVC edge banding. Provided with half drawer storage. The

manufacturer should have the following certification ISO 9001:2015,ISO 14001:2015,ISO

45001:2018,ISO 50001:2018, ISO 37001:2016, ISO Greenguard and bidder should be member

Lotus Pro mattress for double bed (78inch*72 inch*4

Thickness 10 cm

The complete foam quilted mattress gives you highly desirable comfort

The soft foam quilting provides the perfect amount of cushion contouring in

conjunction with providing proper firm support

The stitched bonded fabric provides excellent tear resistance and performance. The

manufacturer should have the following certification ISO 9001:2015,ISO 14001:2015,ISO

45001:2018,ISO 50001:2018, ISO 37001:2016, ISO Greenguard and bidder should be member

Lotus Pro mattress for double bed (78inch*72 inch*4

Thickness 10 cm

The complete foam quilted mattress gives you highly desirable comfort

The soft foam quilting provides the perfect amount of cushion contouring in

conjunction with providing proper firm support

The stitched bonded fabric provides excellent tear resistance and performance. The

manufacturer should have the following certification ISO 9001:2015,ISO 14001:2015,ISO

45001:2018,ISO 50001:2018, ISO 37001:2016, ISO Greenguard and bidder should be member

Size (All dimensions are in

Body panels are made of 18 mm thick Prelaminated Particle Board

All the exposed edges are edge banded with 2 mm thick PVC

edge banding.The manufacturer should have the following certification ISO 9001:2015,ISO

14001:2015,ISO 45001:2018,ISO 50001:2018, ISO 37001:2016, ISO Greenguard and bidder

Size (All dimensions are in

Body panels are made of 18 mm thick Prelaminated Particle Board

All the exposed edges are edge banded with 2 mm thick PVC

Door are made of 18 mm thick AGT with all the exposed edges are

edge banded with 2 mm thick PVC edge banding and with

AGT decorative trim fixed on to it.

Drawer components are made of 18 mm thick Prelaminated Particle

Board .All the exposed edges are edge banded with 2 mm thick Proposed mage

PVC edge banding.

Body back and drawer bottom are made of 8 mm thick

Prelaminated particle board. The high quality hardware used like Roller slides, Hinges, minifix,

wooden dowels is of make Hettich.. Lock used for middle door is 3

way lock. Lock used for right hand door and drawer is cam lock. The manufacturer should have

the following certification ISO 9001:2015,ISO 14001:2015,ISO 45001:2018,ISO 50001:2018,

ISO 37001:2016, ISO Greenguard and bidder should be member of IGBC.

Size (All dimensions are in

Body panels are made of 18 mm thick Prelaminated Particle Board

All the exposed edges are edge banded with 2 mm thick PVC

edge banding. The manufacturer should have the following certification ISO 9001:2015,ISO

14001:2015,ISO 45001:2018,ISO 50001:2018, ISO 37001:2016, ISO Greenguard and bidder

Size (All dimensions are in

Net Weight (kg)

Primary Material

Contemporary & Modern

Delivery Condition

Number of Shelves

Number of Drawers

Wheels Included

Country Of Origin

Size (All dimensions are in

Net Weight (kg)

2 Dining Chairs

Primary Material

Contemporary & Modern

Delivery Condition

Upholstery Material

Wheels Included

Country Of Origin

Sofa Set (3seater + 2 Seater ) 4 Name of Model Divine Sofa Set (3seater + 2 Seater ) Bonjour Sofa Set (3seater + 2 Seater ) Legend 11 Delphy

Size (All dimensions are in

Net Weight (kg)

64 (3 Seater), 50 (2 SEater)

Primary Material

Synthetic Leather

Delivery Condition

Upholstery Material

Seat Height (cm)

Country Of Origin

Size (All dimensions are in

Top should be toughened glass of 10 mm thickness and frame should be a combination of

metal and wood. Storage area underneath the glass top should be made of toughened glass of

6mm thickness. The understructure should be made of 70mm Sq legs of MDF with PU finish.

The manufacturer should have the following certification ISO 9001:2015,ISO 14001:2015,ISO

45001:2018,ISO 50001:2018, ISO 37001:2016, ISO Greenguard and bidder should be member

Dining table with Atlanta Chairs 3 Name of Model UGDT-002 Atlanta 6 seater Dining table with Atlanta Chairs Radiance 11

Size (All dimensions are in 2950(H) x 590(W) x354(D); Chair : 303(H) x 220(W) x 2950(H) x 590(W) x354(D); Chair : 303(H) x 220(W) x H 700 x W 1500 x D 900; Chair : H 900 x

Weight: 70 KG, Primary Material: Solid Wood. Atlanta dining set is a stylish addition to any

modern home. The table Is a blend Of the classic and contemporary, It is crafted from rubber

wood, which offers longevity. The Y shaped legs and a wooden plank in the centre provides

additional support to the table. The Chairs have an innovative look with a low backrest and

joined armrest. With Dark brown Lacquer finish and Ivory coloured PVC upholstery on the seats

it is packed with comfort and style. The manufacturer should have the following certification ISO

Greenguard and bidder should be member of IGBC.

1 seater for Bed Room 8 Name of Model UBS-003 1 seater for Bed Room Gradient 1 seater for Bed Room Foyer seater Bliss

Size (All dimensions are in

Net Weight (kg)

Primary Material

Delivery Condition

Upholstery Material

Seat Height (cm)

Country Of Origin

UBS-003 1 seater for Bed Room

Corner Table 4 Name of Model UGCT-009 Corner Table Timberland Corner Table Pioneer 18CT

Size (All dimensions are in

Net Weight (kg)

Primary Material

Contemporary & Modern

Delivery Condition

Maximum Load Capacity (kg)

Number of Shelves

Wheels Included

UGCT-009 Corner Table

TV Unit along with Bookcase & Display Unit 1 Name of Model ULCD-003 Meraki TV Unit along with Bookcase & Display Unit Innovate

Size (All dimensions are in

600mm(W)*470mm(D)*1920mm(H) and

TV Unit- 1200mm(W)*560mm(D)*1920mm(H), Display Unit 600mm(W)*470mm(D)*1920mm(H)

Bookcase 600mm(W)*470mm(D)*1920mm(H) and Display Unit 600mm(W)*470mm(D)*1920mm(H)

Construction should be Particle Board. Color Combination is Brown and Beige. The

manufacturer should have the following certification ISO 9001:2015,ISO 14001:2015,ISO

45001:2018,ISO 50001:2018, ISO 37001:2016, ISO Greenguard and bidder should be member

SECTION-C (MODULAR KITCHEN-SSB HOWLY) Urban Godrej Sleek Kutchina Johnson Kitchen

Structure made up of Galvanized STEEL. Basket/trolley made up of highest grade of steel i.e

SS-304 with Ni. Cr. plating on it and with warranty of 15 years.

Godrej - Tandem Box used in drawers/ trolleys are tested for 2,00,000 times with 25kg/50kg

load in order to check its performance. Comes with 15 years warranty. Hinges used in shutters

are imported from Hettich and on that CED coating is done for better long life. Legs/ Leveler -

flexible height of the kitchen PVC Skirting , Shutters/ Drawer front – Steel, Kitchen Carcase

floor units comes in default Height of 600mm and Depth 560mm, Kitchen Carcase Wall units

comes in default Height of 700mm and Depth 310mm

Legs : 150mm, Wire basket sizes: 500mm depth , 100/150/200mm height & Width as per

Chimney Included. The manufacturer should have the following certification ISO 9001:2015,ISO

14001:2015,ISO 45001:2018,ISO 50001:2018, ISO 37001:2016, ISO Greenguard and bidder

should be member of IGBC.

3 2 Drawer Unit with Tranquil (175H + 425H) 600 mm 1 Valentia Red

25 2 Drawer Unit with Tranquil (175H + 425H) 600 mm 1 Valentia Red

31 Prefab Corner Plain Shelf Unit 1000 mm 1 Valentia Red

32 Prefab Corner Plain Shelf Unit 1000 mm 1 Valentia Red

33 SKIRTING (REHAU) SYSTEM-150mm- BRUSHED ALUMINIUM 8

34 BRUSHED ALUM. SKIRTING 150mm HARDWARE PACKET FOR KITCHEN CABINETS 1

38 Misc Items for completion of Kiitchen Work 1 LS