Tender ID

J&K

Cancelled

Works

Civil Works

Balance work for Construction of Administrative and Communication Blocks at FTR HQS BSF Humhama

Public Works Department

Humhama | Budgam, Jammu And Kashmir

Amount: ₹56.2 LCloses: 8 Apr 2026Closed

Timeline

Published28 Mar 2026
Cancelled8 Apr 2026

Cancellation Details

Cancellation of Tender

CancellationDue to change of proposalReason: Due to admistrative reasons/issuesDocument: cancelled_1.pdf

Published 8 Apr 2026

Tender Value

₹56.2 L

EMD Value

₹1.1 L

Closing Date

8 Apr 2026, 4:00 pmClosed

Tender Inviting Organisation

Name

Executive Engineer RnB Division Budgam

Address

Engineeering Complex Budgam

Work Description

Balance work for Construction of Administrative and Communication Blocks at FTR HQS BSF Humhama

Tender Information

Tender ID

2026_PWDJK_306922_1

Reference Number

NIT_No_115_DB_2025-26

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Percentage

Period of Work

120 days

Location

Humhama

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

3 documents required · 3 mandatory

Fee/PreQual/Technical/Finance

Requiredalid original Treasury Challan/Receipt (MH.0059) and CDR Registration Card (.pdf)

RequiredValid GSTIN/ PAN Card No, liability/arrears certificate with current date Tender Document form GST R (.pdf)

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹1,600

Tender Fee Payable To

Executive Engineer RnB Division Budgam

EMD Fee Amount

₹1.1 L

Important Dates

Last Activity

8 Apr 2026

Published

28 Mar 2026

Bid Opening

9 Apr 2026

Download Starts

28 Mar 2026

Download Ends

8 Apr 2026

Submission Starts

28 Mar 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (13 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Providing & fixing AC -5 (Commercial) 12mm laminated wooden flooring of Action Tesa, Pergo, Armstrong, Green Panel or equivalent made from high density fibre board having density 900 kg/m³ or more, core board based of dome technology in 12mm thickness, made from lignocellulose material specifically “plantation timbers” like eucalyptus manufactured with homogeneous core, the flooring shall be tropicalized with an anti-bacterial surface with dimensional stability and laminated with melamine formaldehyde impregnated European made décor paper (70-120gsm) duly overplayed with an anti abrasion layer of aluminium oxide impregnated tissue (55,65,85 gsm) in AC5 6500 abrasion cycle ) The product shall have an isometric locking profile made from a 5 spindled profiling head. the locking profile shall be wax coated to prevent moisture seepage. as per direction of Engineer-in-charge.
2Providing and fixing in wall lining (Dila DEDO) of specified High density High Moisture Resistant board, non-laminated, with basic border design using a router or cnc machine with necessary fixing arrangement including water and termite resistant plywood 8mm thick and screws etc. complete as approved by engineer incharge : 18 mm thick
3Providing and fixing in wall specified High density High Moisture Resistant board, non-laminated, with approved 3D design using a cnc machine with necessary fixing arrangement including water and termite resistant plywood 8mm thick and screws etc. complete as approved by engineer incharge : 18 mm thick
4Polishing in matt finish Satin Enamel paint on wood work/HDHMR Board in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of Primer and allowing sufficient drying time for Ist coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On this, Ist coat of Satin Enamel paint is applied with spray gun. This 1st coat is allowed to dry for 24 hrs then the Satin Enamel paint is applied with compressor pressure spray gun using Satin Enamel paint and thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.)
5Polishing in high gloss/matt finish DECO polish on wood work/HDHMR Board in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet/Dry rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet/Dry rubbing, then surface is applied with special grade Wood fillers to fill all the small and big holes/ grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet/Dry rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of PU polish is applied with spray gun using DECO clear polish and DECO thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final DECO polish is applied with compressor pressure spray gun using DECO Top Coat clear polish and DECO thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.)
6Providing and fixing wooden railing of Wallnut wood with balusters poles of dia 2.5 inch and hand railing of outer dia 3.5 inch x 2.5 inch including all accessories and polish. Complete job. The baluster and hand rail will be paid seperately as:
6.01	Baluster	-	No	-	-
6.02	Hand Rail Straight	-	Mtr	-	-
6.03	Hand Rail curved	-	Mtr	-	-
7Providing, supply and fixing of Roller Blinds with powder coated plain cassette of make Marvel /D Decor/ Hunter Douglas or Equivalent in white/color made of extruded non-rusting aluminum alloy 1.25 mm thick; with 1.5 mm thick internal tube of required dia made of non- rusting aluminum with a pocket to insert the fabric inside of it with end plugs & operating mechanism made up of ABS plastic with ball chain of 1.50 mm thickness for lowering or raising the blind and can be positioned on right or left part of blind. The BALLCHAIN shall be minimum 1.5mm diameter cord with 4.5mm diameter acetal balls molded co- axially to it on 6mm pitch to form an endless ball chain. The brackets should be zinc plated / powder coated mild steel. Bottom rail should be gallent (3 mm dia) with fabric covered and square shape made of non rusting aluminum powder coated with 1.50 mm thickness. The fabric should be enclosed in the suitably created pocket along with tube. The channel shall be closed from the sides with endcaps to give a neat look . The fabric has to be blackout 100% polyester, weight 335g/sqm (+ 5%), 0.53mm (+ 0.05) thickness with excellent hanging and tearing strength of approved color complete as per direction of Engineer-in- Charge.

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.02 MB

Cancellation Documents

cancelled_1.pdf

pdf • 0.33 MB

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.30 MB

Work Item Documents

BOQ_996168.xls

BOQ • 0.30 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Providing & fixing AC -5 (Commercial) 12mm laminated wooden flooring of Action Tesa, Pergo, Armstrong, Green Panel or equivalent made from high density fibre board having density 900 kg/m³ or more, core board based of dome technology in 12mm thickness, made from lignocellulose material specifically “plantation timbers” like eucalyptus manufactured with homogeneous core, the flooring shall be tropicalized with an anti-bacterial surface with dimensional stability and laminated with melamine formaldehyde impregnated European made décor paper (70-120gsm) duly overplayed with an anti abrasion layer of aluminium oxide impregnated tissue (55,65,85 gsm) in AC5 6500 abrasion cycle ) The product shall have an isometric locking profile made from a 5 spindled profiling head. the locking profile shall be wax coated to prevent moisture seepage. as per direction of Engineer-in-charge.
2Providing and fixing in wall lining (Dila DEDO) of specified High density High Moisture Resistant board, non-laminated, with basic border design using a router or cnc machine with necessary fixing arrangement including water and termite resistant plywood 8mm thick and screws etc. complete as approved by engineer incharge : 18 mm thick
3Providing and fixing in wall specified High density High Moisture Resistant board, non-laminated, with approved 3D design using a cnc machine with necessary fixing arrangement including water and termite resistant plywood 8mm thick and screws etc. complete as approved by engineer incharge : 18 mm thick
4Polishing in matt finish Satin Enamel paint on wood work/HDHMR Board in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of Primer and allowing sufficient drying time for Ist coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On this, Ist coat of Satin Enamel paint is applied with spray gun. This 1st coat is allowed to dry for 24 hrs then the Satin Enamel paint is applied with compressor pressure spray gun using Satin Enamel paint and thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.)
5Polishing in high gloss/matt finish DECO polish on wood work/HDHMR Board in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet/Dry rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet/Dry rubbing, then surface is applied with special grade Wood fillers to fill all the small and big holes/ grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet/Dry rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of PU polish is applied with spray gun using DECO clear polish and DECO thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final DECO polish is applied with compressor pressure spray gun using DECO Top Coat clear polish and DECO thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.)
6Providing and fixing wooden railing of Wallnut wood with balusters poles of dia 2.5 inch and hand railing of outer dia 3.5 inch x 2.5 inch including all accessories and polish. Complete job. The baluster and hand rail will be paid seperately as:
6.01	Baluster	-	No	-	-
6.02	Hand Rail Straight	-	Mtr	-	-
6.03	Hand Rail curved	-	Mtr	-	-
7Providing, supply and fixing of Roller Blinds with powder coated plain cassette of make Marvel /D Decor/ Hunter Douglas or Equivalent in white/color made of extruded non-rusting aluminum alloy 1.25 mm thick; with 1.5 mm thick internal tube of required dia made of non- rusting aluminum with a pocket to insert the fabric inside of it with end plugs & operating mechanism made up of ABS plastic with ball chain of 1.50 mm thickness for lowering or raising the blind and can be positioned on right or left part of blind. The BALLCHAIN shall be minimum 1.5mm diameter cord with 4.5mm diameter acetal balls molded co- axially to it on 6mm pitch to form an endless ball chain. The brackets should be zinc plated / powder coated mild steel. Bottom rail should be gallent (3 mm dia) with fabric covered and square shape made of non rusting aluminum powder coated with 1.50 mm thickness. The fabric should be enclosed in the suitably created pocket along with tube. The channel shall be closed from the sides with endcaps to give a neat look . The fabric has to be blackout 100% polyester, weight 335g/sqm (+ 5%), 0.53mm (+ 0.05) thickness with excellent hanging and tearing strength of approved color complete as per direction of Engineer-in- Charge.

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Providing & fixing AC -5 (Commercial) 12mm laminated wooden flooring of Action Tesa, Pergo, Armstrong, Green Panel or equivalent made from high density fibre board having density 900 kg/m³ or more, core board based of dome technology in 12mm thickness, made from lignocellulose material specifically “plantation timbers” like eucalyptus manufactured with homogeneous core, the flooring shall be tropicalized with an anti-bacterial surface with dimensional stability and laminated with melamine formaldehyde impregnated European made décor paper (70-120gsm) duly overplayed with an anti abrasion layer of aluminium oxide impregnated tissue (55,65,85 gsm) in AC5 6500 abrasion cycle ) The product shall have an isometric locking profile made from a 5 spindled profiling head. the locking profile shall be wax coated to prevent moisture seepage. as per direction of Engineer-in-charge.

2Providing and fixing in wall lining (Dila DEDO) of specified High density High Moisture Resistant board, non-laminated, with basic border design using a router or cnc machine with necessary fixing arrangement including water and termite resistant plywood 8mm thick and screws etc. complete as approved by engineer incharge : 18 mm thick

3Providing and fixing in wall specified High density High Moisture Resistant board, non-laminated, with approved 3D design using a cnc machine with necessary fixing arrangement including water and termite resistant plywood 8mm thick and screws etc. complete as approved by engineer incharge : 18 mm thick

4Polishing in matt finish Satin Enamel paint on wood work/HDHMR Board in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of Primer and allowing sufficient drying time for Ist coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On this, Ist coat of Satin Enamel paint is applied with spray gun. This 1st coat is allowed to dry for 24 hrs then the Satin Enamel paint is applied with compressor pressure spray gun using Satin Enamel paint and thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.)

5Polishing in high gloss/matt finish DECO polish on wood work/HDHMR Board in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet/Dry rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet/Dry rubbing, then surface is applied with special grade Wood fillers to fill all the small and big holes/ grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet/Dry rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of PU polish is applied with spray gun using DECO clear polish and DECO thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final DECO polish is applied with compressor pressure spray gun using DECO Top Coat clear polish and DECO thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.)

6Providing and fixing wooden railing of Wallnut wood with balusters poles of dia 2.5 inch and hand railing of outer dia 3.5 inch x 2.5 inch including all accessories and polish. Complete job. The baluster and hand rail will be paid seperately as:

6.01

Baluster

6.02

Hand Rail Straight

Mtr

6.03

Hand Rail curved

Mtr

7Providing, supply and fixing of Roller Blinds with powder coated plain cassette of make Marvel /D Decor/ Hunter Douglas or Equivalent in white/color made of extruded non-rusting aluminum alloy 1.25 mm thick; with 1.5 mm thick internal tube of required dia made of non- rusting aluminum with a pocket to insert the fabric inside of it with end plugs & operating mechanism made up of ABS plastic with ball chain of 1.50 mm thickness for lowering or raising the blind and can be positioned on right or left part of blind. The BALLCHAIN shall be minimum 1.5mm diameter cord with 4.5mm diameter acetal balls molded co- axially to it on 6mm pitch to form an endless ball chain. The brackets should be zinc plated / powder coated mild steel. Bottom rail should be gallent (3 mm dia) with fabric covered and square shape made of non rusting aluminum powder coated with 1.50 mm thickness. The fabric should be enclosed in the suitably created pocket along with tube. The channel shall be closed from the sides with endcaps to give a neat look . The fabric has to be blackout 100% polyester, weight 335g/sqm (+ 5%), 0.53mm (+ 0.05) thickness with excellent hanging and tearing strength of approved color complete as per direction of Engineer-in- Charge.