Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹79.5 LAccepted-AOC 4 KHEME KA KUA PAL ROAD JODHPUR RAJASTHAN 342001 | JODHPUR | JODHPUR | RAJASTHAN | 342001 | L1 | Accepted-AOC L1 bidder found reasonable | |
| 2 | L2₹89.4 L+₹9.1 L (11.3%)Rejected-Finance UTARLAI KAWAS BARMER RAJASTHAN 344 001 | BARMER | RAJASTHAN | 344001 | L2 | Rejected-Finance Higher rate quoted by bidder | |
| 3 | L3₹89.8 L+₹9.4 L (11.7%)Rejected-Finance 12 53 CHOPASNI HOUSING BOARD JODHPUR 342 008 RAJ | JODHPUR | JODHPUR | RAJASTHAN | 342008 | L3 | Rejected-Finance Higher rate quoted by bidder |
Tender Value
₹99.2 L
EMD Value
₹1.7 L
Closing Date
17 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AF JAISALMER
HQ CWE AF JAISALMER
PROVISION OF SEWAGE REALTED WORKS SERVICES IN DOMESTIC AREA AT AF STN UTARLAI
2022_MES_533645_2
80188/E8
Open Tender
Civil Works
Item Rate
300 days
GE AF UTARLAI
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,000
GE AF UTARLAI
₹1.7 L
Yes
19 Sept 2022
26 Jul 2022
19 Aug 2022
26 Jul 2022
17 Aug 2022
2 Aug 2022
Amount
Surface desseing in soft/loose soil not exceeding 15cm deep complete all as specified and directed.
Excavating trenches in soft/loose soil, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, cesspits,manholes, pier holes, water/sewer pipe line, cable line etc not exceeding 10 Sqm area on plan and not exceeding 1.5 m in depth and getting out complete all as specified and directed.
Excavating trenches in hard/dense soil, not exceeding 1.5 m wide and exceeding 1.5 m but not exceeding 3 m in depth; for foundation, etc. or for shafts, cesspits,manholes, pier holes, water/sewer pipe line, cable line etc not exceeding 10 Sqm area on plan and exceeding 1.5 m but not exceeding 3 m in depth and getting out complete all as specified and directed.
Excavating trenches in hard/dense soil, not exceeding 1.5 m wide and exceeding 3 m but not exceeding 4.5 m in depth; for foundation, etc. or for shafts, cesspits,manholes, pier holes, water/sewer pipe line, cable line etc not exceeding 10 Sqm area on plan and exceeding 3 m but not exceeding 4.5 m in depth and getting out complete all as specified and directed.
Excavating trenches in hard/dense soil, not exceeding 1.5 m wide and exceeding 4.5 m but not exceeding 6 m in depth; for foundation, etc. or for shafts, cesspits,manholes, pier holes, water/sewer pipe line, cable line etc not exceeding 10 Sqm area on plan and exceeding 4 m but not exceeding 6 m in depth and getting out complete all as specified and directed.
Excavating trenches in soft/disintegrated rock, not exceeding 1.5 m wide and exceeding 1.5 m but not exceeding 3 m in depth; for foundation, etc. or for shafts, cesspits,manholes, pier holes, water/sewer pipe line, cable line etc not exceeding 10 Sqm area on plan and exceeding 1.5 m but not exceeding 3 m in depth and getting out complete all as specified and directed.
Excavating trenches in soft/disintegrated rock, not exceeding 1.5 m wide and exceeding 3 m but not exceeding 4.5 m in depth; for foundation, etc. or for shafts, cesspits,manholes, pier holes, water/sewer pipe line, cable line etc not exceeding 10 Sqm area on plan and exceeding 3 m but not exceeding 4.5 m in depth and getting out complete all as specified and directed
Excavating trenches in soft/disintegrated rock, not exceeding 1.5 m wide and exceeding 4 m but not exceeding 6 m in depth; for foundation, etc. or for shafts, cesspits,manholes, pier holes, water/sewer pipe line, cable line etc not exceeding 10 Sqm area on plan and exceeding 4 m but not exceeding 6 m in depth and getting out complete all as specified and directed
Excavating trenches in bituminous/concrete road/hardstanding and the like, not exceeding 1.5 m wide and exceeding 1.5 m but not exceeding 3 m in depth; for foundation, etc. or for shafts, cesspits,manholes, pier holes, water/sewer pipe line, cable line etc not exceeding 10 Sqm area on plan and exceeding 1.5 m but not exceeding 3 m in depth and getting out complete all as specified and directed.
Removing excavated material to a distance not exceeding 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed
Removing excavated material to a distance exceeding 50 m but not exceeding 100 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed
Removing excavated material to a distance exceeding 250 m but not exceeding 500 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed
Removing excavated material to a distance exceeding 500 m but not exceeding 1.5 km and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed
Removing excavated material to a distance exceeding 1.5 km but not exceeding 5 km and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm with soft/loose soil or hard/dense soil complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm with soft disintegrated rock complete all as specified and directed
M & L for rendering 10 mm thick cement plaster on fair faces of brick work/ concrete surfaces in cement mortar (1:3) using water proofing compound mixing with cement as per manufacturer's instructions, surfaces finished even and smooth without using complete all as specified and directed. ( Note : Water proofing compound shall be measured and paid for separately)
Supply only Integral water proofing compound complete all as specified and directed.
M & L for Non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular), coloured tiles, area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match shade of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor finishes/tiles complete all as specified and directed.
M & L for cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.
M & L for cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in coping, surface channels of manholes/ drains, cills, benching for manholes and the like including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work etc complete all as specified and directed.
M & L for reinforced cement concrete (1:2:4) type B-1, using 20 mm graded crushed stone aggregate as in manhole slabs, and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary form work etc complete all as specified and directed. (Note : Reinforcement shall be measured and paid for separately )
M & L for extra for forming fair finished drain or channel 50 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc.complete all as specified and directed .(Note : Inner girth shall be measured and paid for.)
S & F framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 Kg each brackets, conforming to Fe-290 Gde E-165 for frame to manhloe slab complete all as specified and directed.
M & L for precast cement concrete block masonry in precast cement concrerte (1:3:6) type C-1 using 20mm graded stone aggregate with solid blocks exc 10cm in width and setting in cement mortar (1:6) complete all as specified and directed.
M & L for precast cement concrete block masonry in precast cement concrerte (1:3:6) type C-1 using 20mm graded stone aggregate with solid blocks exc 10cm in width and setting in cement mortar (1:4) complete all as specified and directed.
M & L for precast reinforced cement concrete (1:2:4) type B-1, using 20 mm graded crushed stone aggregate as in manhole cover slabs, chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and the like and set in cement mortar (1:4); including weathering, slightly rounded or chamfered angles and throating including necessary form work as complete all as specified and directed. (Note : Reinforcement shall be measured and paid for separately)
S & F 10mm dia and over mild steel TMT bars , cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.
S & F 6 to 8mm dia mild steel TMT bars, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.
S & F mild steel round bars 10mm dia and overof grade Fe-410-W Gde.E-250 Quality'A' or Fe 290 Gde E-165; , cut to length, bent to shape required including cranking, bending and binding with and including mild steel wire (annealed) not less than 0.9 mm diameter including as in rungs complete all as specified and as directed.
M & L for preparatngn of new steel and iron surfaces of any description not exceeding 10cm in width or girth and applying one coat of black bituminous paint over a coat of red oxide zink chrome primer complete all as specified and directed.
S & F 75 mm bore cast iron, sand cast, soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.
S & F 75 mm bore cast iron, sand cast, soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed.
S & F 100 mm bore cast iron, sand cast, soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.
S & F 100 mm bore cast iron, sand cast, soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed.
M & L for 150 mm bore reinforced cement concrete pipe, class NP3, with collars; laid on concrete bed to required slope and jointed complete all as specified and directed.
M & L for 200 mm bore reinforced cement concrete pipe, class NP3, with collars; laid on concrete bed to required slope and jointed complete all as specified and directed.
M & L for 250 mm bore reinforced cement concrete pipe, class NP3, with collars; laid on concrete bed to required slope and jointed complete all as specified and directed.
M & L for 300 mm bore reinforced cement concrete pipe, class NP3, with collars; laid on concrete bed to required slope and jointed complete all as specified and directed.
M & L for cement concrete (1:3:6) type C-2 using 40 mm graded crushed stone aggregate as in concrete bed for 150 mm bore reinforced cement concrete pipes including packing under haunching against the sides of pipe after they are laid and tested complete all as specified and directed.
M & L for cement concrete (1:3:6) type C-2 using 40 mm graded crushed stone aggregate as in concrete bed for 150 mm bore reinforced cement concrete pipes including packing under and completely surrounding pipes with concrete after they are laid and tested complete all as specified and directed.
M & L for cement concrete (1:3:6) type C-2 using 40 mm graded crushed stone aggregate as in concrete bed for 200 mm bore reinforced cement concrete pipes including packing under haunching against the sides of pipe after they are laid and tested complete all as specified and directed.
M & L for cement concrete (1:3:6) type C-2 using 40 mm graded crushed stone aggregate as in concrete bed for 200 mm bore reinforced cement concrete pipes including packing under and completely surrounding pipes with concrete after they are laid and tested complete all as specified and directed.
M & L for cement concrete (1:3:6) type C-2 using 40 mm graded crushed stone aggregate as in concrete bed for 250 mm bore reinforced cement concrete pipes including packing under haunching against the sides of pipe after they are laid and tested complete all as specified and directed.
M & L for cement concrete (1:3:6) type C-2 using 40 mm graded crushed stone aggregate as in concrete bed for 250 mm bore reinforced cement concrete pipes including packing under and completely surrounding pipes with concrete after they are laid and tested complete all as specified and directed.
M & L for cement concrete (1:3:6) type C-2 using 40 mm graded crushed stone aggregate as in concrete bed for 300 mm bore reinforced cement concrete pipes including packing under haunching against the sides of pipe after they are laid and tested complete all as specified and directed.
M & L for cement concrete (1:3:6) type C-2 using 40 mm graded crushed stone aggregate as in concrete bed for 300 mm bore reinforced cement concrete pipes including packing under and completely surrounding pipes with concrete after they are laid and tested complete all as specified and directed.
S & F in repairs 150mm x 150mm salt-glazed stoneware gully traps, square or round mouthed, type 'P' of size with 150mm dia outlet pipe set and jointed in cementmortar (1:1) complete all as specified and directed.
S & F in repairs vitreous China water closet Sqatting pan, "Orissa Pattern" size 580x440mm white with 'P' or 'S' trap front or back inlet and integral foot rests any pattern including connecting pipe of CI at suitable bore and length and including fixing of Cistern, flush pipe including provision of lean cement concrete bedding in PCC (1:5:10) type E-2 and making good to disturbed surface etc but excluding supply of flushing cistern and flush pipe complete all as specified and directed. (Note:-PVC seat cover, PVC flushing cistern and flush pipe shall be measeued and paid for supply only under respective items)
S&F in repair vitreous china wash down water closet (Pedestal pattern) including connection to drain (or out going pipe) and fixing to flushing pipe, anti-sypohonage pipe etc. with plastic water closed seat cover (white) closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device hinge device, complete all specified and directed. (Note:- PVC seat cover, flushing cistern and flush pipe shall be measeued and paid for supply only under respective items)
Supply only plastic water closet seat cover, white, closed pattern flat bottom, and cover and mild steel chromium plated or aluminised hinging device for pedestal or Anglo Indian WC seats complete all specified and directed .
Supply only 32 mm dia flush pipe of polyethylene of low or high density or PVC for low level flushing cistern suitable for IWC, EWC and anlo-Indian water closet complete all specified and directed.
Supply only 10 llitres capacity low level PVC valveless syphonic action type flushing cistern with inlet ball valve, float and handle including brackets complete all as specified and directed.
S & F in repair 15 mm size PVC connection with PTMT nuts of length 450 mm long complete all as specified and directed.
S & F in repairs 75 mm dia of outlet cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete(1:2:4) type B1 using 20mm graded stone aggregate complete all as specified and directed.
S & F 100mm bore cast iron 'P' or 'S' trap for WCs without grating complete all as specified and directed.
S & F 100 mm cast iron connection socket/TEE to fit out let of WC complete all as specified and directed.
S & F in repairs 100 mm cast iron connection socket/TEE to fit out let of WC complete all as specified and directed.
S & F in repairs 75 mm dia cast iron bends(any radius) with oval access door etc complete all as specified and directed.
S & F in repairs 100 mm dia cast iron bends(any radius) with oval access door etc complete all as specified and directed.
S & F in repairs 75 mm dia cast iron cowl complete all as specified and directed.
Cutting into existing manholes for connecting new drains with inserting 150mm dia pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed.
Cutting into existing manholes for connecting new drains with inserting 200mm dia pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed.
Cutting into existing manholes for connecting new drains with inserting 250mm dia pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed.
Cutting into existing manholes for connecting new drains with inserting 300mm dia pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed.
Rolling and consolidating formation surfaces with 8 to 12 tonne power roller roller to required camber and gradient complete all as specified and directed.
M & L for 150mm thick (spread thickness) soling (or sub base) in one layer with broken boulder or quarried stone of (Granite,Trap,Basalt) , interstices filled, surface formed and rolled and consolidated to required gradient and camber with 8 to 12 tonne power roller complete all as specified and directed.
M & L for 150 mm thick (compacted thickness) WBM, in two layers (75 mm thick each layer) with coarse aggregates of Granite, trap or basalt of grading -2 (63 to 45 mm size), spread, rolled and consolidated to required gradient and camber complete all as specified and directed.
M & L for preparing surfaces of WBM by brushing with wire brushes for removing caked mud etc. sweeping with brooms & finally fanning the cleaned surfaces with air compresser to remove all loose dirt and dust etc; and applying evenly a priming/tack coat with paving bitumen primer of grade VG-10 @ 10 kg/10 sqm using mechanical sprayer complete all as specified and directed.
M & L for 40mm consolidated thickness bituminous premix semidense aphaltic concrete (SDAC) with 5.5% binder content (bitumen of grade VG-30) by weight of total mix using Mechanical Paver including levelling device and profile control within the specified tolerance and internal heating arrangement for the screed all as specified in clause 20.B.4.6 of SSR Part -I, rolled and consolidated to required camber and gradient with 8 to 12 tonne power roller to a uniform smooth surface etc complete all as specified and directed. Note:- Design Mix Job Mix Formula shall be got carried out from the IIT,NIT, Govt Engineering College, National Accreditation Board forTesting and Calibration laboratories (NABL) approved laboratory; by the contractor under his own expenses and arrangements, shall be approved by the GE before commencement of work. Bitumen extraction test and core test etc shall invaribly be carried out at site during execution of the work).
M & L for 100mm thick cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base of floor/pavement complete all as specified and directed.
M & L for 100mm thick cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in top layer of floor/pavement complete all as specified and directed.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified and directed.
Demolition of cement concrete (unreinforced ) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Demolition of reinforced cement concrete any descriptiona and in any position not otherwise specifically provided for, including cutting reinforcement as required to facilitate demolition and removing from site complete all as specified and directed.
Demolition of brick masonry/ block masnory masonry/ PCC block masonry/stone masonry built in cement mortar including all quoins, arches, pillars, etc .but excluding ashlar facings, dressd stonework and precast concrete articles and removing from site all as specified and directed.
Demolition of precast RCC articles built in cement mortar including all quoins, arches, pillars, etc. and removing from site all as specified and directed.
Demolition and breaking up 150 mm internal dia drain pipes (Salt glazed stoneware, AC or Reinforced concrete) set in cement mortar incuding removing from trenches complete all as specified and directed.
Demolition and breaking up 200 mm internal dia drain pipes (Salt glazed stoneware, AC or Reinforced concrete) set in cement mortar incuding removing from trenches complete all as specified and directed.
Demolition and breaking up 250 mm internal dia drain pipes (Salt glazed stoneware, AC or Reinforced concrete) set in cement mortar incuding removing from trenches complete all as specified and directed.
Demolition and breaking up 300 mm internal dia drain pipes (Salt glazed stoneware, AC or Reinforced concrete) set in cement mortar incuding removing from trenches complete all as specified and directed.
Dismantling 100 mm internal dia cast iron or reinforced concrete drain pipes jointed in cement mortar and taking out of trenches and walls, if required complete all as specified and directed.
Dismantling 75 mm internal dia cast iron or reinforced concrete drain pipes jointed in cement mortar and taking out of trenches and from walls, if required complete all as specified and directed.
Dewatering the sewage water from existing manholes/ grease traps/ soakage pits/ septic tanks of any type/size/capacity at any depth in foul conditions by bailing out / pumpimg out or by any other means and removing/draining off sewage water in open drain / nearby surrounding low lying area complete all as specified and as directed.
Cleaning and desludging by removing semi-solid sludge/ solid sludge from existing manholes/ grease traps/soakage pits/ septic tanks of any type/size/capacity at any depth in foul comnditions by adopting Mechanical methods including all necessary tools and plants requred for removal of sludge and solid contents from site to a distance out side MD land where directed by EIC and covering the top with15cm layer of soil complete all as specified and as directed.
M/S Tanisha Traders
M/s godara infratech and power industries
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .