Installation of Bus Stop at Hazratbal Dargah Chowk Srinagar

Earth work in excavation by manual means In trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, Including getting out excavated earth and disposal of surplus excavated earth as directed:

Providing and Laying of Stone Soling

Providing and laying in position Plain Cement Concrete 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) for leveling course under foundations, including placing, compaction, and curing.

Providing and laying in position cement concrete of specified grade Including curing but excluding the cost of centring and shuttering. All work upto piinth level with: 4.4.4 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 40 mm nominal size)

Providing and fixing 10x10x7.50 cm Cobble stone block hand cut and chisel dressed on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1cement:4 coarse sand) jointled with grey cement slurry mixed with pigment to match the shade of the stone including ruled pointing etc. complete as per direction of engineer-in charge

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etcupto floor V level, including curing but excluding the cost of centring, shuttering and finishing with. 1:1:3 (1 cement: 1 coarse sand: 3 graded stone aggregate 20 mm nominal size)

BackFilling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Supplying and embedding in position high-strength steel foundation anchor bolts (20mm diameter, 500mm long) complete with threading, nuts, and washers as per structural drawing.Anchors

Providing and fixing stainless steel (Grade 304) of Hollow tubes channels, plates etc. including welding,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete,Including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with sultable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing and fixing 12mm thick clear toughened safety glass (15 2553), Including edge polishing, fixing with SS-304 patch fittings, EPDM gaskets, and silicone sealant.

Providing and fixing 10mm thick, UV. stabilized, multi-wall polycarbonate sheet for roofing, including proprietary aluminum profiles and accessories to ensure a leak-proof installation.

Providing and fixing Powdered ACP Sheet 4 mm thick of approved make, colour and shade in partitions/signage, Including cutting, edge finishing, polishing, and fixing with aluminium beading, stainless steel screws/adhesives, scaffolding, transportation, and complete as directed by the Engineer-in-Charge.

Design, supply, installation, tesong, ano commissioning of a high-performance, autonomous dusk-to-dawn Solar Power Generating System, complete in all respects, Including the following minimum specifications and as per the directions of the Engineer-in-Charge (EIC): Solar PV Module: Not less than 200 Wp peak power output, high-efficiency Monocrystalline PERC type with a minimum 25-year performance warranty, compliant with all relevant BIS/IEC standards. Solar Battery: Not less than 100 Ah capacity at 12V (C10 rating). Solar Tall Tubular type designed for deep cycle applications, with a minimum 5-year manufacturer's warranty.Solar Charge Controller: MPPT (Maximum Power Point Tracking) technology, minimum 15A/12V rating, with an in-built programmable automatic dusk-to-dawn feature to control the load (automatic ON at sunset, OFF at sunrise). The controller must be equipped with comprehensive electronic protections including overcharge, deep discharge (LVD), short circult, and reverse polarity. Mounting Structure: Heavy-duty, hot-dip galvanized Mild steel (MS) structure robustly designed.

S/F LED 12w surface lights l/c modular switch,plate 1.5sqmm wire FRLS 2x1.55Sqmm+1.55 Sqmm l/c PVC Condult, Gi Box all complete

Supplying and installing a backlit Advertisement Panel, Internally Illuminated with high-efficiency LED modules and acrylic fascia.

Supplying and fixing a SS-304 perforated sheet dustbin (approx. 40 Litre capacity) with anchoring fittings

Supply and fixing of individual 3D letters of 15 cm height for the bus stop name, fabricated from 5 mm thick, UV-stabilized, high-gloss acrylic sheet of an approved make and color. The scope Includes CNC laser cutting for precise and smooth edges, making a paper template for accurate alignment and spacing, and fixing the letters firmly onto the bus stop fascia using stainless steel studs (pins) and high-strength epoxy adhesive. The work shall be completed in all respects as per specifications and directions of the EIC

Carriage of material lead upto 12km . Aggregate 40mm or above.

Carriage of material lead upto 12km. Sand