Welcome maintenance of Officers Md Accn and Cleaning and marking of water tanks along with roof treatment and leakage seepage for New and Old Mil Stn Kapurthala under GE Kapurthala.

Amount

M&L perparation of old decorated plastered surfaces of wall and cornics by complete removal of existing treatment by applying water and scrapping of entire thickness of existing treatment with using steel scraper and thereafter applying two coat of oil bound distemper over and including wall care putty to achieve smooth finish over a coat of appropriate primer complete all as specified and directed by Engr-in-Charge. Note- OBD to be done by roller.

M&L perparation of old decorated plastered surfaces of wall and cornics by complete removal of existing treatment by applying water and scrapping of entire thickness of existing treatment with using steel scraper and thereafter applying applying two coat of exterior emuslion paint/ weather proof coat over and including wall care putty to achieve smooth finish over a coat of appropriate primer complete all as specified and directed by Engr-in-Charge. Note- weather proof coat to be done by roller.

M&L for preparation of old plastered surfaces of ceiling and applying two coats of oil bound distermper complete all as specified and directed by Engr-in-Charge. Note- OBD to be done by Roller.

M&L for preparation of old plastered surfaces of ceiling and applying two coats of white wash after complete removal of existing complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster on brick or stone wall etc incl raking out joints, hacking for key scrubbing down with water etc, complete all as specified and directed by Engr-in-Charge.

M&L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces of walls and applying one coat of Birla white putty 2mm Thick to obtain the true line to achieve smooth surface and applying two coats of oil bound distermper complete all as specified and directed by Engr-in-Charge. Note- OBD to be done by Roller.

M&L applying two coats of cement base paint on newly plastered or unplastered wall surface over a coat of cement primer including preparation of surfaces,complete all as specified and directed by Engr-in-Charge. Note- CBP to be done by Sprayer.

M&L for preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old steel surfaces of any description over 10cm girth or width not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed by Engr-in-Charge.

Dismantling floor hearth or wall tilling including cement mortar bedding (but not backaing coat) removing serviceable tiles to store & rubbish off the premises, complete all as specified and directed by Engr-in-Charge.

M&L for glazed ceramic coloured tiles 9-10mm thick of area exe 0.13 sqm and not exe 0.72 sqm over 10 mm thick rendering in CM(1:4) as in vertical surfaces such as in dado/skirting after taking down plastering including set and jointed neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed by Engr-in-Charge.

M&L Vitrified Ceramic tiles9-10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.42sqm but not exceeding 1.00 Sqm, in floors/skirting etc set & jointed in neat cement slurry & pointed in white or coloured cement to match. incl 15mm thick screed bed/bedding layers in cm 1:4 complete all as specified and directed by Engr-in-Charge.

M&L for granite 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types including 15 mm thick bedding layer in CM 1:6, complete all as specified and directed by Engr-in-Charge.

Taking up or down steel tubing 15mm bore & connection including cleaning for refixing or removal to store, complete all as specified and directed by Engr-in-Charge.

S&F15mm bore GI water tubing medium grade fixed complete to wall or ceiling, complete all as specified and directed by Engr-in-Charge.

Taking up or down steel tubing 20 mm bore & connection including cleaning for refixing or removal to store, complete all as specified and directed by Engr-in-Charge.

S&F 20 mm bore GI water tubing medium grade fixed complete to wall or ceiling, complete all as specified and directed by Engr-in-Charge.

Cutting chases pinning in brick/stone/blocks masonary in making good to facings where required and pointing in CM (1:3) to ends or eges of steps, cills, sun shades, shelves, lintel etc and cutting chases for concealed water tubing or etc and making good, complete all as specified and directed by Engr-in-Charge.

S&F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed by Engr-in-Charge.

S&F 20mm dia aluminium chromium plated tubular towel rails,D type,60cm long between flanges, complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15 mm bore CP bib taps (long body) fancy type cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15mm dia stop/angle valve, CP cast copper alloy with crutch or butterfly handle. Screwed down high pressure, screwed both ends for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repairs for vitreous china ware wash hand basin with pedestal type (color as specified and directed), flat back size 550 X 400mm including 15mm dia pillar tap swan neck) chromium plated, CP waste coupling, waste fittings, union and waste pipe 32mm dia or required length and all necessary inlet, out let connections complete all as specified and directed by Engr-in-Charge.

S&F fancy type chromium plated 15mm dia pillar taps swan neck , cast copper alloy with crutch or butterfly handle, screwed down, with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and directed by Engr-in-Charge.

S&F in repairs vitreous china squatting pan wash down water closet of size 580x440 mm, white, with integral foot rests complete fixed in repairs with P or S trap, PVC flushing cistern low level of Make 10 ltrs capacity including brackets for flush tank, PVC flush pipe and all necessary fittings etc complete all as specified and directed by Engr-in-Charge.

S&F in repairs S&F sinks with drainage board made of stainless steel 3mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed by Engr-in-Charge.

S&F in repairs brass CP mixture valve Centre hole, cast copper alloy fancy type chromium plated for mixing hot and cold water screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia as per, complete all as specified and directed by Engr-in-Charge.

S&F in repairs Brass CP wall mixer with L bend for connection to overhead shower for mixing hot & cold water screwed down for iron pipe and fixed of 15mm bore complete all as specified and directed by Engr-in-Charge.

S&F in repairs 100mm over head shower of chromium plated any colour or fixing with 15mm pipe with 225mm, SS Arm and flange complete all as specified and directed by Engr-in-Charge.

S&F in repairs Chromium plated, Brass, Jet spray including flexible pipe 15mm bore, screwed down, high-pressure pipe of 15 mm bore with wall flange fixed to wash down water closet (pedestal pattern) complete all as specified and directed by Engr-in-Charge.

S&F in repairs stainless steel plate rack (Utensil rack) of size 900mmx1200mm and depth 300mm made with 0.63mm thick stainless sheet fixed with brass screw including necessary fittings complete all as specified and directed by Engr-in-Charge.

S&F in repairs vitreous china European type wash down water closet pan (single piece including built in flushing cistern) colour (as specified and directed) including seat cover (with MS or CP hinging device) and fixing bolts, P or S trap, necessary inlet and outlet connections, complete all as specified and directed by Engr-in-Charge.

S&F in repairs Toilet paper holder of CP fixed to walls with chromium plated (CP) brass screws complete all as specified and directed by Engr-in-Charge.

S&F in repairs towel rack of CP fixed to walls with chromium plated (CP) brass screws complete all as specified and directed by Engr-in-Charge.

S&F in repair 20mm dia gunmetal gate valves with iron wheel screwed both ends for iron pipe and fixed, complete all as specified and directed by Engr-in-Charge.

S&F in repairs health faucet with 15 mm with 1.00 mtr CP flexible pipe, complete all as specified and directed by Engr-in-Charge.

S&F in repairs soap dish stainless steel of heavy weight of approved make, complete all as specified and directed by Engr-in-Charge.

S&F in repairs corner glass shelf of size 300mm dia 8mm thick with chromium plated bracket complete all as specified and directed by Engr-in-Charge.

M&L steel curtain rod of 25mm dia, powder coated having wall thickness 1mm, with aluminium powder coated brackets fixed to wall with screws, gutties @ 1500mm C/C (approx) and curtain rings (Minimum 5 Nos rings per running mtr of curtain rod) including taking out the existing old pelmet box along with old curtain rods and removing, complete all as specified and directed by Engr-in-Charge.

Dismantling of cast iron pipes jointed in cement mortar and taking out from trenches/ wall 100/75 mm bore (sand cast) incl bends/Y/T complete all as specified and directed by Engr-in-Charge.

S&F 75mm PVC(SWR) pipes single socketed in any length with rubber ring joint fixed to walls complete all as specified and directed by Engr-in-Charge.

S&F 75mm PVC(SWR) bends complete all as specified and directed by Engr-in-Charge.

S&F 110mm PVC(SWR) pipes single socketed in any length with rubber ring joint fixed to walls complete all as specified and directed by Engr-in-Charge.

S&F 110mm PVC(SWR) bends with access door complete all as specified and directed by Engr-in-Charge.

S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal with access door, complete all as specified and directed by Engr-in-Charge.

Add to items 48 & 49 if provided with access door, complete all as specified and directed by Engr-in-Charge.

S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed by Engr-in-Charge.

S&F 75mm PVC (SWR) branch piece, double (double Y) equal or unequal, complete all as specified and directed by Engr-in-Charge.

Add to items 51 & 52 if provided with access door, complete all as specified and directed by Engr-in-Charge.

M&L for hacking out old broken glass (any thickness size, quality or description) from wooden/ metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones not exceeding 0.5 Sqm, complete all as specified and directed by Engr-in-Charge.

M&L for Acrylic glass sheet plain 3mm thick ordinary quality and glazing with oil putty in square not.exc 0.5 Sqm in each pane, complete all as specified and directed by Engr-in-Charge.

M&L for sheet glass frosted 3mm thick ordinary quality and glazing with oil putty in square not.exc 0.5 Sqm in each pane, complete all as specified and directed by Engr-in-Charge.

Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frame), complete all as specified and directed by Engr-in-Charge.

Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4.00 Sqm each (Without taking off shutters from the frame, complete all as specified and directed by Engr-in-Charge.

Taking down Shutter exceeding 1.0 Sqm but not exceeding 2.00 Sqm each, complete all as specified and directed by Engr-in-Charge.

Taking down Shutter exceeding 2.0 Sqm each, complete all as specified and directed by Engr-in-Charge.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, in opening as per specification and drawing, complete all as specified and directed by Engr-in-Charge.

S&F pressed steel frames factory made for doors out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs, hinges, lock strike plate, hinges etc complete, size of frame 125x60mm including tarring ends and back of chowkats and lugs including back filling of PCC 1:3:6 for chowkats & PCC 1:2:4 for block for hold fast including two coats of synthetic enamel paint over a coat of red oxide primer on exposed surfaces complete all as specified and directed by Engr-in-Charge.

S&F 35mm thick 2nd class hardwood (factory made) plain framed paneled shutters ( two panels) with lock rail and panels of 12 mm thick veneered particle board with comercial veneering on both sides of 9mm thick ply (BWP grade) fixed to chowkhat/ frame complete. The size of rails and styles of 2nd class hardwood as per IS 1003 (Part I) Killn seasoned & chemically pressure treated complete all as specified and directed by Engr-in-Charge.

S&F 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc.; size of members of shutters as specified in SSR Part – I, Section – 8, clause 8.24 (b) ; supplied and fitted to chowkats, complete all as specified and directed by Engr-in-Charge.

M&L for 25mm thick Prelaminated particle board, grade -2 quality interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work for cuboard shutter, complete all as specified and directed by Engr-in-Charge.

S&F factory made solid Panel PVC moulded door shutter with particle board core ,28 to 30mm thick (stiles) with 2,4 or 6 raise panel design with 2mm thick moulded pvc sheet on the front face and 2mm plain colour pvc sheet on back face supplying and fixing in frame at site, complete all as specified and directed by Engr-in-Charge.

S&F steel window 1.25mm thick Box type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises glazed Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:2:4) type B-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Mild Steel Hold Fast,150mm long of 12mm Square bar made to shape – 04 Nos per window (b) Handles of Z Sec 20mm x 100mm long (c) stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (e) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf complete all as specified and directed by Engr-in-Charge and shown on drawings. Note: (i) Glass shall be measured and paid separately under appropriate item of Sch 'A' (ii) Irrespective of whatever shown on drgs, & measured and paid separately under appropriate item of Sch 'A'.

S&F steel window 1.25mm thick Box type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises gauged Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Mild Steel Hold Fast,150mm long of 12mm Square bar made to shape – 04 Nos per window (b) Handles of Z Sec 20mm x 100mm long (c) stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (e) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf. Note: wire mesh shall be measured and paid separately under appropriate item of Sch 'A'.

S&F framed work such as grills, grating, etc, with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work or water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed by Engr-in-Charge.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed by Engr-in-Charge.

S&F 200 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed by Engr-in-Charge.

S&F alumunium hinges for PVC door shutter, size of hinges in 100mm, complete all as specified and directed by Engr-in-Charge.

S&F Aluminium handles, cast type, anodised of size 150 mm, complete all as specified and directed by Engr-in-Charge.

S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed by Engr-in-Charge.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, Overall length of cover plate 140 mm , with hard drawn steel spring, fixed in floor, complete all as specified and directed by Engr-in-Charge.

S&F in repairs 300mm, ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed by Engr-in-Charge.

M&L for metal Welding Exc 6 mm but n exc 9mm in repairs n. exc 2.5cm in length, complete all as specified and directed by Engr-in-Charge.

M&L Preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new steel surfaces of any description over 10cm girth or width not otherwise described and applying two coat of synthetic enamel paint over red oxide primer complete all as specified and directed by Engr-in-Charge.

S&F in repairs for PVC flushing cistern valve less, syphonic action type low level, ball valve, float and handle with bracket fixed in repair of 10 ltrs capacity complete all as specified and directed by Engr-in-Charge.

S&F in repair 1000 litres capacity Rotational moulded polyethylene water storage tanks triple layered (Cylindrical vertical with closed top) hoisted and fixed in position including complete all as specified in SSR Part I including disconnectiong of existing tank, complete all as specified and directed by Engr-in-Charge.

S&F in repairs 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed in repair complete all as specified and directed by Engr-in-Charge.

M&L PVC floor trap 75 mm dia outlet fixed with grating including jointing to waste pipe in run lead complete all as specified and directed by Engr-in-Charge.

Taking down plaster from edges of RCC chajja or corner where steel reinforcement coming out incl dubbing with in CM (1:3) after applying cement slurry in girth not exceeding 30cm complete all as specified and directed by Engr-in-Charge.

Dismantling boarding, any description, fixed in any position with nails, complete all as specified and directed by Engr-in-Charge.

S&F 18/19mm thick block boards, grade 2 quality, interior grade, commercial type in shelves, complete all as specified and directed by Engr-in-Charge.

S&F 6mm thick cover fillet for 18/19mm wide block board of 2nd class hardwork, complete all as specified and directed by Engr-in-Charge.

Disconnecting existing water tanks setting aside (or lowering if required) for repairs, including Cleaning and removing all scale and dirt,chlorinating etc, from tanks and from mouths of circulating pipes, etc. cleaning etc and hoisting if required, reconnecting and refixing in position all as specified in SSR for capacity exc 250 & n exc 500 Litres, complete all as specified and directed by Engr-in-Charge.

Disconnecting existing water tanks setting aside (or lowering if required) for repairs, including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. cleaning etc and hoisting if required, reconnecting and refixing in position all as specified in SSR for capacity exc 500 & n exc 1000 Litres, complete all as specified and directed by Engr-in-Charge.

S&F new rotational moulded polyethylene water storage tank three layered (Cylindrical vertical with closed top), white coloured, hoisted & fixed in position , capacity 500 litres, including dismantling of unserviceable tank and removing from site complete all as specified and directed by Engr-in-Charge.

S&F new rotational moulded polyethylene water storage tank tank three layered (Cylindrical vertical with closed top), hoisted & fixed in position , capacity 2000 litres, including dismantling of unsv tank and removing from site, complete all as specified and directed by Engr-in-Charge.

Refixing old15mm steel tubing and connections in new or old position (Walls, ceiling, floors, etc), complete all as specified and directed by Engr-in-Charge.

Refixing old 20mm steel tubing and connections in new or old position (Walls, ceiling, floors, etc), complete all as specified and directed by Engr-in-Charge.

S&F in repairs float valves 15mm high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210 gms./25mm-455gms/ 40mm - 690 gms), complete all as specified and directed by Engr-in-Charge.

S&F in repairs float valves 20mm high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210 gms./25mm-455gms/ 40mm - 690 gms), complete all as specified and directed by Engr-in-Charge.

S&F in repairs float valves 25mm high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210 gms./25mm-455gms/ 40mm - 690 gms), complete all as specified and directed by Engr-in-Charge.

S&F in repairs gunmetal globe and gate valve with iron welded hand screwed both and for iron pipe 15mm, complete all as specified and directed by Engr-in-Charge.

Taking down eaves gutters and rainwater pipes including all fittings, complete all as specified and directed by Engr-in-Charge.

Demolition of brick/block masonry built in CM including all quoins, arches, pillars etc and clearing off the premises, complete all as specified and directed by Engr-in-Charge.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and directed by Engr-in-Charge.

S&F in repairs PVC cover of water tank cap 500/1000 ltrs complete all as spd.complete all as specified and directed by Engr-in-Charge.

M&L PCC 1:2:4 type B-0 using 20 mm graded crushed stone aggregate 25mm thick complete all as specified and directed by Engr-in-Charge.

M&L for cleaning of roof by removing of vegetation from wall/floor at any height and making good the damaged portion to match with the existing by PCC 1:2:4 type B-0 and finished with 15mm thick plaster in 1:4 complete all as specified and directed by Engr-in-Charge.

Uprooting of tree roots from walls/roof of any girth at any height/ location of any depth by dismantaling brickwork/PCC and making good the damaged portion as existing by PCC 1:2:4 type B-0 and finished with 15mm thick plaster in 1:4 complete all as specified and directed by Engr-in-Charge.

M&L for cleaning the surface and made free of vegetation, dirt, foreign particles, liatance complete all as specified and directed by Engr-in-Charge.

M&L rendering 10mm thick on brick or concrete surface in cement mortar 1:3 with water proofing compound finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

Supply only water proofing compound.(Make Dr Fixit), complete all as specified and directed by Engr-in-Charge.

Supply and apply high build elastomeric waterproofing coated based on pure hydrophobic polyurethane cold applied or spray, brush applied, membrane with an elongation of 280 % and tensile strength of 2.7N/mm2 as per ASTMD 2370, crack bridging ability of 3mm, no leakage upto 5 bars of water pressure, minimum 88% solid content. The system includes final base preparation, epoxy primer application with 100% water dilution and pure polyurethane application in two coats with minimum consumption of 1.2 kg/sqm, complete all as specified and directed by Engr-in-Charge. Note: Application should be done with graco sprayer by company authorised applicator.Make: Asian/ STP/ Sikka.

COSMO BUILDERS

GEE EMM ASSOCIATES