SPECIAL REPAIR TO BLDG NO 144/01 TO 08 (OR MD ACCN) AND OTM BLDG NO 440 AND 441 (BATHROOMS AND TOILETS) UNDER AGE B/R-I AT ALWAR

Amount

Dismantling of stone slab and tiles of any description or thickness in floors, aprons etc laid, beded and pointed in any mortar including removing the dismantled material complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises complete all as specified and directed

Taking down cement plaster any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

Demolition of concrete in ground floors and pavings n exc 15cm thickness (below or above ground level) including removing the domolisd material out side of defence land all as specifed and directed

M&L for 25mm thick cement concrete type B-0, 1:2:4 (12.5 mm graded stone aggregate) as under floor tiles finished the surface even and fair complete all as specified and as directed by Engineer-in-Charge.

M&L for coloured joint free Non skid ceramic tiles 7 to 8mm thick area of each tile exceeding 0.18Sqm but not exceeding 0.36 Sqm, as in floors etc, laid over and including 15 mm thick screed bed of cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

All as per item No 6.00 above but in skirting over and including 10 mm thick plaster in cement mortar 1:4 including necessary cutting of tiles as required size all as specified and as directed.

M&L for coloured non skid ceramic tiles 7 to 8mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floors etc, laid over and including 15 mm thick screed bed of cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L glazed ceramic coloured tiles(Ist quality) in vertical surface 450mm x 300mm x 7-8mm thick joint free set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in cement & sand mortar 1:4 complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store bore of pipe 15mm complete all as directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store bore of pipe 20mm complete all as directed.

Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) bore of pipe 15mm complete all as directed

Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) bore of pipe 20mm complete all as directed

S&F 15mm dia steel water tubing medium grade galvanised with all fittings and fixed to wall and ceiling or laid in floor complete all as specified and as directed.

S&F 20mm dia steel water tubing medium grade galvanised with all fittings and fixed to wall and ceiling or laid in floor complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing and making good , cutting not exc 10cm girth complete as specified and directed.

S&F in repairs, vitreous China squatting pan, 'Orissa' pattern, size 580mm x 440 mm, white with integral foot rest and 'P' or 'S' trap, including provision of Cement concrete bedding, connection to trap and flushing pipe etc complete including making good to disturbed surfaces of floor to match with existing specifications as specified and directed.

S&F in repair 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet ball valve, float, handle including Flush Pipe of polyethylene of low or high density or PVC 32 mm dia for low level cisterns and brackets after taking down old cistern all as specified and as directed.

S&F in repair vitreous china wash basin white flat back, size 450x300 mm, including brackets cutting for and pinning in ends of brackets or erecting stand including waste fitting, brass chromium plated 32mm size with long screwed shocks and fly nut, flange end bedded in red lead cement and othe end fixed complete all as specified and directed.

Supply only 32mm dia high density polyethylene (HDPE) pipes of pressure rating 6Kg/Sq. cm laid in floor or fixed to walls including taking down old pipes all as specified and as directed.

Supply only 40mm dia high density polyethylene (HDPE) pipes pressure rating 6Kg/Sq. cm laid in floor or fixed to walls including taking down old pipes all as specified and as directed.

S&F in repair stop valves/angle cock bore of pipe in 15mm, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in reapirs 15mm bore, stop valve, chromium plated, fancy type, with long shank, and cup (Concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions etc complete all as specified and directed.

S&F in repair bib taps bore of pipe in 15mm, cast copper alloy, fancy type, chromium plated, with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair Pillar taps,15 mm bore cast copper alloy, fancy type, chromium plated, with capstan heads, screwed down high pressure complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repairs brass chromium plated shower rose 125mm size fixed to 15mm bore pipe all as directed.

S&F brass chromium plated tubular towel rail, 20mm dia, D type, 60 cm long between flanges fixed to wall complete all as specified and directed.

S&F stainless steel kitchen utencil rack over all size 30" x 31" x 10" and thickness of stainless steel plate 0.60mm, fixed to wall with stainless steel screws complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick for kitchen or laboratory with plugs washers and wastes including waste pipe fixing cantilever brackets and connecting union to pipe overall size not less than 915mm x 460mm and bowl size 410mm x 330mm x160mm complete all as directed.

S&F grating round 100 mm size of PTMT (Minimum weight 25gms) complete all as directed. Make Prayag or equivalent as approved by GE

S&F PVC (SWR) 75mm dia floor trap, plain with grating including jointing with solvent cement.

S&F 110mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in trenches or floors all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, fixed to walls with holder bat clamps of GI flat iron 25x3 mm all as specified and directed.

S&F PVC (SWR) bends 110mm dia any radius.

S&F PVC (SWR) junction single(Single T) equal or unequal with access door110mm dia.

S&F PVC(SWR) vent cowl 110mm dia.

S&F PVC(SWR) vent cowl 75mm dia.

S&F PVC(SWR) reducers 110mm dia.

S&F 75mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in trenches or floors.

S&F 75mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, fixed to walls with Holder bat clamps of GI flat iron 25x3mm all as specified and directed.

S&F PVC (SWR) bends 75mm dia any radius.

S&F PVC (SWR) junction single(Single T) equal or unequal 75mm dia.

S&F 110mm PVC (SWR) WC connector bent type all as specified and as directed.

Dismantling AC Pipe/ PVC pipes 110mm/ 75 mm dia.

Dismantling water tanks capacity exc 250 & not exc 500 litres of any description complete all as specified and directed.

Dismantling water tanks capacity exc 500 & not exc 1000 Litres of any description complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks 500 litres capacity double layers ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I and directed by Engr-in-Charge.

S&F rotational moulded polyethylene water storage tanks 1000 litres capacity double layers ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I and directed by Engr-in-Charge.

Disconnecting existing tanks, exc 500 & n exc 1000 litres setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position all as specified and directed.

S&F in repairs 20mm bore ball valves, high pressure, PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron piped and fixed in position all as specified. Make- Prayag or equivalent as approved by GE.

S&F in repairs 20mm bore Gun Metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.5 Sqm but n exc 4.00 Sqm each.

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) not exc 1.5 Sqm each.

Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each.

S&F mild steel Framed work using angle Iron, flat Iron, round bars as in security doors/gates with end of bars shouldered and or rivetted or forged into spikes ,framed guard bars barred into iron doors ,walkways railing framework amd similler work confiming to Fe 290, GDE E-165 all as specified and directed.

Dismantling fencing wire mesh,any type including Mild steel bars, flat iron , nuts & bolts etc complete all as specifeid and directed .

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion in natural ground and making good disturbed ground Complete all as specified and directed.

Excavating in post holes (or similar holes) each not exc 0.5 Cum, getting out in soft/loose soil and removing surplus soil to a distance n exc 50m complete all as specified and directed.

M&L for cement concrete type C-2, 1:3:6 using 40mm graded stone aggregate as in foundation filling and mass concrete in fixing of fencing post including necessary form work if required at site complete all as specified and directed.

S&F hand rails, half round or other stock section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolt posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and the screwed the other to be fitted with washers and one hexagonal or square but exc 5 cm but n.exc 10 cm long, dia of shank 5 to 10mm.

Supply only chain link MS galvanisd fencing, any size or type complete all as specified and approved by GE.

Fixing only Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire complete all specified and directed.

M&L for mild steel round bars of 10 mm dia and over conforming to Grade E-165 (Fe 290) as in handles of man hole covers & similar works including necessary cutting etc and fixing in position complete all as specified & directed.

Removing steel window shutters by cutting hinges by welding and making good any demage occurred during removal of shutters not exceeding 0.75 Sqm each all as specified and directed.

S&F 35mm thick, factory made panelled door shutter (two panel), plain, framed with 2nd class hard wood lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rails and stile as per IS-1003 (Part I), kiln seasoned and chemically pressure treated complete as specified and directed.

S&F 35mm thick, second class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauge, etc (without sash bars) fitted with cut and mitred securing beads for securing glass etc complete as specified and directed sizes of members of shutters as specified in SSR Part I Section 8 clause 8.24 (a) complete all as specified and directed.

S&F steel windows box type with side hung shutters including projecting type hinges with steel handle 150mm, and steel peg stay complete with glazing bars, dovetailed or welded & factory made (XW2)M/F) double shutter, openable shutter with glazing bars and other openable shutter without glazing bars, fabricated with members of standard size as shown on drawings including frames complete all as specified. Note :- The quoted rates shall be deemed of lugs and FI required for fixing wire cloth, sheet glass, grills, iron mongry and guard bars as shown on drg.

M&L for aluminum powder coated (thickness of powder coating not less than 50 micron) as in ventilators half fixed and half louvers type and small window single leaf cut to size, jointed together with cadmium plated steel screws including rubber packing, aluminium beading or gasket for aluminium sections for fixing glass sheet and necessary fittings complete, screws plugs, handle, tower bolt, stay hocks etc all as specified and directed. (Make : JINDAL/HINDALCO). Notes :- (i) Weight of aluminium sections shall only be measured. (ii) The supply only rate of glass sheet will be measured seperately.

S&F solid PVC door frame of size 50mmx47mm made out of 10mm, single side prelam PVC sheet used and edges will be painted to match with printed to match with prelam sheet, reinforced with MS square tube & fixing in opening including hold fast complete all as specified and directed. (SS butt hings shall be paid seperately supply only)

S&F factory made solid PVC Moulded door shutter 28 to 30mm thick (stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on front face & 2 mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and directed.

S&F mild steel cupboard shutter with frame, godrej pattern made out of 22 guage mild steel sheet including chromium plated MS handle with proper locking arrangement (brass mortice lock vertical type size 65mm 4 lever with escutcheon plates & two keys) with & including two coats of spray painting with synthetic enamel paint of approved tint over a coat of red oxide primer including fixing with 6 Nos 12 mm dia bolt 150mm long grouted in brick wall/concrete including making good the disturbed surface as original complete all as specified and as directed. Note :- The measurement shall be taken of front elevation and not girthwise.

Supply only stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete.

S&F stainless steel butt hinges, 100mm medium weight and fixed all as directed.

S&F butt hinges, cold rolled mild steel , 100mm medium weight and fixed all as directed.

S&F aluminium anodised barrel tower bolt of extruded section 200mm long all as directed.

S&F 150mm aluminium anodised barrel tower bolts of extruded section

S&F 125mm extruded aluminium alloy handles , fabricated type, anodised

S&F 150mm extruded aluminium alloy handles , fabricated type, anodised

S&F aluminium anosided hasp and staple, 100mm size safety type with mild steel hinge pin including to bolt to hinge plate and fixed with screws complete all as directed.

S&F mild steel sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12mm dia, 250mm long, with and including a minimum of 6 bolts and nut, four on bolt plate and two on staple plate and fixed

S&F harrison rail/curtain rod of metalic 20mm dia with chromium plated including bracket both side fixed in position by drilling holes in walls and fixed the brackers with rawl plug and steel screw compete all as specified and directed.

M&L for repairs to sunken floor slab with the following specifications :- (a) Roughening surfaces of old concrete floor and wall by picking, sweeping clean and washing down with water to remove dust etc. (b) PCC 1:2:4, type B-0, using 12.5mm graded stone aggregate averaging 50mm thick as in sunken floor,with proper slope towards GI spout. (c) providing 15mm thick cement plaster in cement mortar 1:3 mixed with water proofing admixture as per manufacture's instructions over bottom and vertical surfaces contact with sunken slab, finishing the surface even and smooth using extra cement. (d) Damp proof course on horizontal surfaces with scrapping and properly cleaning the surface to remove loose particles & applying one coat of self priming (33% dilution) and two coats of undiluted material with @ 10.67 lts per 10 sqmt as Damp proof for water proofing ,and Damp proof course on vertical surfaces scrapping and properly cleaning the surface to remove loose particles and applying one coat of self priming (33% dilution) and one coats of undiluted material with @ 4.85 lts per 10 sqmts. Damp proof for water proofing Make of DPC solution :- Asian/STP/Choksey/Pidilite. (e) Brick bats filling under sunken floor. (f) PCC 1:3:6,type C-2,using 20mm graded stone aggregate 75mm thick, over brick bats filling as in subbase to receive tiles. Note :- For payment purpose only floor area shall be measured.

M&L for taking down and removal of loose/ditegrated old concreteplaster and applying 3mm thick bonding coat of modified styrene butadiene emulsion (SBR Bonding agent i.e Nitobond SBR 45) in proportion 1(Nitobond SBR 45) : 1 (Water) : 3 (OPC) by volume with the brushes etc to bind New cement plaster/polymer Modified Plaster/concrete / Screed concrete with old surface etc complete.

M&L for applying 15 mm thick plaster with polymer modified mortrar fortified with SBR (Nitobond SBR 45) in porpotion 1:3 by weight 5 Litres Nit bond SBR 45 to added to 50 Kg cement with 13 Litre water addition, finished surface to match with existing adjoining surface of ceiling, Beams and like complete

M&L rendering 20mm thick polymer cement mortar 1:3 prepared with latex SBR by the weight of cement concrete surface including finishing the surface even and smooth without using extra cement. Make : Liquid of M/S choksey/STP/Sika/Pidilite as approved by GE. Note:- Exact qty and application process of chemical is strictly as per manufature,s guidelines

M&L for waterproofing treatment by the ater proofing liquid of Tech force 2K strong of choksey od equivalent of Dr Fixit/Fosroc fter proper cleaning f the new surface free of dust and applying the first coat (By brush only) @ 4-4.5 Sqm/Lit, allowing it to dry for 24 hrs and applying the second coat over it on horizontal and vertical surface all as specified and directed. Note:- 1. Application shall be carried out through authorised applicator of manufactureer only and as per guidlines of manufacturere strictly. 2. Each stage shall be passed by the Engr-In-Charge/GE before laying further coat. Note :- Sunshield 100 of M/S Choksey or fosroc/ST/Pidilite/Sika as approved by GE

M&L for 75mm thick cement concrete (1:3:6) type C1 using 20 mm thick graded stone aggregate as in plinth protection laid in alternate bays n exc 2.5m length finished even & smooth and joint to be filled with Bituminous mastic filling including necessary form work complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar includin gall quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M&L for brick work with old size fly ash bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick built in cement mortar 1:4

Demolition of reinforcement cement concrete in roof, floors(other than ground floors), beams, staircase, landing, chajjas and similar suspended work complete all as directed.

M&L for use and waste of form work to soffits of suspended slabs such as roof slab n.exc 200mm thick complete all as specified.

M&L form work to edges of concrete flats, treads, breaks in floors, windows cills, concrete railings, floor and roof n.exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specifed.

M&L for use and waste of form work to sides and soffits of chajjas for fair finished surfaces complete all as specified and as directed.

M&L for reinforced cement concrete type B1 (1:2:4) nominal mix using 20 mm graded broken stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, shelves and the like complete all as specifed and directed.

M&L for reinforced cement concrete type B1 (1:2:4) nominal mix using 20 mm graded broken stone aggregate as in chajjas and the like complete all as specifed and directed.

S&F mild steel TMT round bars 10 mm dia and over, cut to length, bent to shape required, including cranking , binding spirally for hooping end and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified.

All as per item No 101.00 above but 6mm dia to 8 mm dia.

M&L for 7.5cm thick sand stone slabs in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4. complete all as specified.

M&L for 16-18mm thick granite black colour (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platform, staircase treads and like jointed over and including 15mm thick screed in cement mortar (1:6) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, compltee all as specified.

Rounding the edges of stone slabs one edge, such as in steps, cooking plateform and other similar situations complete all as directed.

M&L for drilling holes for pipes etc in cooking plateform stone slab including RCC slab nexc 25mm dia and exc 100mm depth complete all as directed.

M&L for Machine cut kota stone slab flooring 20 to 25mm thick single piece not less than 1.20 mtr laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 15mm thick cement screed bed in cement mortar 1:6 including rubbing, half rounding/nozing and mirror polishing complete all as specified and as directed.

M&L for kota stone slab 20 to 25mm thick, single piece in riser of steps, skirting, dado and pillars laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 10mm thick rendering in cement mortar 1:4 including cutting, rounding outer edges, rubbing and mirror polishing complete all as specified and as directed.

M&L 15 mm thick rendering in cement mortar 1:4 mixed with water proofing admixture as per manufacturers instructions on fair faces of stone masonry, or concrete surfaces, finished with even and smooth complete all as specified and directed. Note :- Water Proofing admixture shall be measured and paid seperately.

M&L for rendering 15mm thick internal surfaces in cement mortar 1:6 on fair faces of stone masonry or concrete surfaces finished even and fair without using extra cement all as specified and as directed.

M&L 5mm thick rendering in cement mortor 1:3 on concrete surfaces as in ceilings (with sunshed, chajja etc) and finishing surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for taking down and removal of loose/disintegrated old concrete/plaster and applying 10mm thick bonding coat of modified styrene butadiene emulsion (SBR bonding agent i.e. Nitobond SBR 45) in proportion 1(Nitobond SBR 45) : 1(water) : 3(OPC) by volume with the brushes etc to bind new cement plaster/polymer modified plaster /concrete /screed concrete on old wall/ceiling surface etc complete all as specified and directed by Engr-in-Charge.

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified

Supply only liquid water proofing admixture

M&L two coats of synthetic enamel paint over one coat of pink primer on wood or wooden based surface exc. 10cm width or girth including preparation of new or previously untreated surfaces complete all as specified and directed.

M&L one coats of synthetic enamel paint on Old Painted wood or wooden based surface exc. 10cm width or girth including preparation all as specified and directed.

M&L for applying two coat of synthetic enamal paint over a coat of red oxide primer on new steel based surfaces exc.10cm width or girth including preparation all as specified and directed.

M&L two coats of synthetic enamel paint on old steel surfaces of any description over 10cm width or girth including preparation all as specified and directed.

M&L for preparation of newly plaster surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

M&L for two coats of white wash on decorated surfaces of ceiling including preparation of surfaces complete all as specified and as directed.

M&L for one coat of white wash on decorated surfaces of ceiling including preparation of surfaces complete all as specified and as directed.

M&L for applying two coats of distemper oil emulsion over 2mm thick wall care putty on newly plaster surface of walls complete all as specified and directed.

M &L for complete removal of existing treatment of any description & applying two coat of oil bound distemper over 2mm thick wall care putty on undecorated old surfaces of walls complete all as specified and directed.

M&L preparing new plastered surfaces of walls and applying three coats of white wash complete as specified and directed.

M&L for applying two coats of white wash on old decorated surface of walls including preparation all as specified and as directed.

M&L preparing new plastered surfaces of walls and applying two coats of cement paint over a coat of cement base primer complete as specified and directed.

M&L for complete removal of existing treatment of any description & preparation of old surfaces by washing rubbing down and stopping of plastered surfaces and applying two coats of Cement based paint white or tined on walls including cornices etc over a coat of cement base primer complete all as specified and directed.

Excavation in trenches n.exc. 1.5 M wide and n.exc. 1.5 M in depth for foundation and getting out in soft/loose soil all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers n.exc. 25cm deep as in soft/loose soil copletete all as specified .

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point

Demolition and breaking up 150 mm bore drain pipes, salt glazed stone ware set in cement mortar including PCC haunching and bedding, complete.

M&L for 150 mm bore reinforced concrete pipe, class NP2, laid and jointed (in CM 1:1) complete with collars all as specified & as directed

M&L for PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate in bedding to NP2 drain pipes, including packing under and haunching against the sides of pipes after they are laid and tested complete for 150 mm bore pipe all as specified and as directed.

M&L for cutting into existing manholes / septic tank for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required for 150mm bore pipe.

S&F for 50mm thick steel fibre reinforced (SFRC) man hole cover with iron frames (medium) complying to the standard specifications as mentioned in the IS 12592 BIS Standard minimum load bearing capacity 5 ton/Sqm in square, rectangular or circular shape complete all as specified & as directed.

S&F for GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste

M&L for Providing cement concrete as in coping PCC 1:2:4 Type B-0 using 12.5mm graded aggregate, with & including necessary form work Complete all as specified and as directed.

M&L for use and waste of form work to soffits of suspended slabs such as roof slab n.exc 200mm thick complete all as specified.

M&L form work to edges of concrete flats, treads, breaks in floors, windows cills, concrete railings, floor and roof n.exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n.exc 20 cm wide complete all as specifed.

M&L glazed ceramic coloured tiles(1st quality) in vertical surface 300X200x 7-8 mm set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in cement & sand mortar 1:4 complete all as specified and directed.

S&F aluminium alloy, anodised, 300mm sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

M&L 15mm thick rendering in cement mortar 1:4 on fair faces of stone/brick masonry, or concrete surfaces, finished with even and smooth complete all as specified and directed.

S&F in repair vitreous china under counter basin size 560 x 450 x 185 mm shape ovel of Somany Cat No SKU: 17111025001101 or equivalent of PARRYWARE / JAQUAR / SOMANY / PRAYAG as approved by GE including 32 mm CP waste coupling & PVC flexible waste pipe of 90 cm long complete all as specified & directed.

S&F in repair for vitreous china urinals, half stall (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing grating and Union for discharge pipe incl CP 40mm waste coupling and PVC 40mm waste pipe 900mm long .

S&F in repair urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)

M&L for 16-18mm thick Granite (of any type) work for wall lining/urinal partition etc, (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 10mm thick rendering in cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, compltee all as specified.

M&L for hard core of broken stone or boulders of gauge n.exc. 63mm deposited spread and levelled in layers n.exc. 15 cm thick watered and rolled/ rammed to a true surface complete all as specified and directed.

M&L cement concrete 75mm thick 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base of floor fcomplete all as specified & directed.

M&L precast cement concrete block masonry 1:2:4 Type B-1 (using 20mm graded stone aggregates) as in kerb with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and directed.

Supply and laying of sand including spreading, levelling and ramming in layers n.exc. 25 cm thick in each layer complete all as directed.

S&F for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and no pigment laid over sand cushing complete all as specified & directed. Note :- Sand cushioning will measured and paid seperately.

Surface excavation n. exc 30 cm deed and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Taking down carefully copper/aluminium point wiring for one light/socket/power point and taking down of teak wood batten/ PVC casing caping and making good disturbed surfaces of walls/ ceiling/ floors etc including dismentling of fittings.

M&L for point wiring for one light point controlled by one, one way switch with 1.50 Sqmm two single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including PVC casing & caping with accessories fixed on surface of walls/ceiling by means of PVC sleeves/dash fasteners with cadmium plated screws, all as per IS and including wooden boxes fixed on wall with and including 3mm thick phenolic laminated sheet top cover for mounting switches, sockets, fan regulators etc complete all as specified.

All as per serial item No 155.00 here-in-before but for one fan point controlled by one switch and regulator.

All as per serial item No 155.00 here-in-before but for one exhaust fan point controlled by one switch and regulator.

All as per serial item No 155.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on same board.

All as per serial item No 155.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on independent board.

All as per serial item No 155.00 here-in-before but for one bell buzzer point controlled by one switch.

All as per serial item No 155.00 here-in-before but for one light point controlled by two, two way switches.

All as per serial item No 155.00 here-in-before but for one 3 pin socket outlet 15/16 Amps controlledby one 15/16 Amps switch on independent board with 2.50 Sqmm two single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour.

S&F switch piano flush type, single pole, one way, 5/6 Amp, 230 Volts complete all as specified and directed.

S&F switch piano flush type, single pole, one way, 5 Amp, 230 Volts complete all as specified and directed.

S&F switch piano flush type, single pole, two way, 5 Amp, 230 Volts complete all as specified and directed.

S&F bell/buzzer AC 230 Volts single pole complete all as specified and directed.

S&F switch piano flush type, single pole, one way, 15 Amp, 230 Volts complete all as specified and directed.

S&F socket outlet for 3 pin (with 2 pin outlet also), 5/6 Amp, flush type 240 Volt complete all as specified and directed.

S&F socket outlet for 2 in 1, 3 pin 5 & 15 Amp, flush type 240 Volt complete all as specified and directed.

S&F ceiling rose surface bakelite 65mm x 50mm two or three terminals complete all as specified and directed.

S&F decorative ultra slim liner LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient suitable for 16 Watt to 20 Watt with LED tube of model E-LITE LED Pride Plus and connecting up with and including three core, PVC insulated, sheathed copper conductore cable of required size and length from ceiling rose to fitting complete all as specified & directed. Make :- Havells Cat Part No LHEXBHP71NW018 or equivalent of Philips/ Crompton Greaves /Bajaj/Wipro.

S&F LED type security light luminaire 20 watt 230 V 50 Hz including all necessary fitting accessories and LED complete all as directed. Make Havells Superb Cat part No LHEXAYP7PN6K020 or equivalent of Philips/ Crompton Greaves/ Bajaj/ Syska

S&F LED bulb 10/11 watt complete all as specified and directed. Make : Havell's/Crompton/ Syska.

S&F lamp holder PVC/Polycarbonatetype with back plate suitable forbatten fittings complete all as specified.

S&F stepped type electronic fan regulator, flush type and connecting up ISI marked 240 volts complete all as specified & directed.

S&F sheet metal enclosures, double door type, suitable for fixing MCB SPN with 200 Amps rated bus bar, 8 way, 240 volts complete all as specified and directed.

S&F sheet metal enclosures, double door type, suitable for fixing MCB SPN with 200 Amps rated bus bar, 4 way, 240 volts complete all as specified and directed.

S&F sheet metal enclosures, double door type, suitable for fixing MCB SPN with 200 Amps rated bus bar, 2 way, 240 volts complete all as specified and directed.

S&F MCB 63 Amps, triple pole & neutral, 415 Volts complete all as specified and directed. Make : Legrand/ Havells/ABB

S&F MCB 32 Amps, single pole & neutral, 240 Volts complete all as specified and directed. Make : Legrand/Havells/ABB

S&F MCB 6-40 Amps, single pole, 240 Volts 'C' curve, 10KA ISI marked as per IS/IEC 60898-1 2002 complete all as specified and directed. Make : Legrand /Havells /ABB

S&F sub main wiring on including passing throuh PVC conduit pipe 1100 volts grade with PVC flexible cable copper conductor unsheathed multistranded single core of size 6 Sqmm and continuous earth with PVC flexible cable copper conductor unsheathed multistranded single core of size 4 sqmm of green colour confirming to IS 694/1990 including taking down existing unserviceable sub main wiring. (Note : Two runs of cable with one run of earth wire and one run of PVC casing caping should measured as one length).

S&F 2nd class hard wood rectangular block open recessed of size 30 x 25 x 5cm depth with 3mm thick phenolic laminated sheet top cover fixed with suitable steel screws & PVC rawl plug (4 Nos) complete all as specified and directed.

Supply, laying, jointing and testing XLPE insulated, armoured, heavy duty LT underground electric cable with stranded aluminium conductor 1100 volts grade cross sectional area 16 sqmm 2 core laid in trenches, along poles through pipes etc complete all as specified & as directed. (i) Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately including taking down old unserviceable XLPE cable. (ii) Road cutting/floor cutting /cutting holes etc in walls required for laying/fixing of cable etc shall be made good as per existing. Nothing extra shall be admissible on this account. Quoted rates shall be inclusive of the above provisions.

M&L for brick work with fly ash bricks {As per IS-13757 (1993) burnt clay fly ash building bricks}, (Old size bricks) with width equal to the length of the brick laid dry & flat abutted with each other with gap between adjacent bricks not exc 10 mm over UG cable for protection complete all as specified & directed.

M&L dry sand (Tibba sand) and punning for cushioning to under ground cable all as directed. Note :- For the purpose of payment only punned thickness shall be measured.

M&L 40mm grade GI pipe (light grade) for protection of LT cable fixed to wall /pole /road crossing including clamps complete all as directed.

Disconnecting from elect connection and taking down carefully the existing electric energy meter of any capacity, any make, any size and depositing the same in AGE E/M Store Yard all as specified and directed by the Engineer-in-Charge. Refixing the same inside the old meter inside box carefully including necessary electric connections complete all as directed.

Disconnecting from elect connection and taking down carefully the existing ceiling fan/exhaust fan/geyser of any capacity any make, any size and depositing the same in AGE E/M Store Yard all as specified and directed by the Engineer-in-Charge. Refixing the same ceiling fan/exhaust fan/geyser carefully including necessary electric connections complete all as directed.

M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point/panel/ equipment and testing on including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre, charcoal and salt in alternate layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore 3.00 metre long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shall be provided on CI frame etc complete all as specified & as directed.

S&F cubical metallic box of size 0.80m x 0.60m x 0.25m depth, made out of 2 mm thick mild steel sheet, front openable double door type with locking arrangement with and including 3 mm thick plain sheet clear glass of suitable size fixed to facilite meter reading and position of MCBs, all internal and external steel surfaces painted with two coats of synthetic enamel paint over a coat of red oxide primer, internal wiring with PVC insulated single core multistranded copper conductor FRLS cable IS-694 marked of adequate size but not less than 6 Sq mm with proper ferrule and cable gland, box shall be fixed on wall with 'Anchor' type/fastner type bolts & nuts (set of 6 bolts of 12 mm dia 200 mm long with nuts and washers) grouted into the wall properly to hold the box, writing MES/Qtr No for each energy meter with thick white synthetic enamel paint, neoprene rubber gasket shall be provided for proper sealing including incoming MCCB 100 Amps rated, box shall have arrangments for fixing electric energy meter-04 Nos, MCB DB SPN 2 way, 4 Nos complete all as directed.

M/S JINDAL ENTERPRISES