ADDITION ALTERATION TO FURNITURE SHED AT AFAC COIMBATORE

Amount

Surface dressing not exceeding 15 cm deep in soft loose soil , complete all as specified & directed.

Excavation in trenches not exceeding 1.50 mtr wide and not exceeding 1.50 mtr deep and getting out in hard/dense soil, complete all as specified & directed.

Returning filling in trenches including spreading, levelling watering and well ramming in layers not exceeding 25 cm thick in hard/dense soils, complete all as specified & directed.

Removal of excavated soil to a distance not exceeding 100 mtr and depositing where directed at a level not exceeding 1.50m above the starting point, complete all as specified and as directed.

M&L for hard core with broken stone boulders of gauge not exceeding 63mm, watering and well rwmming, complete all as specified and directed.

M&L for Plain Cement Concrete 1:4:8 type D2 (40 mm graded stone aggregate) in foundation and filling in mass concrete, complete all as specified and as directed.

M&L for Pre-cast cement concrete 1:3:6, type C1(20mm graded aggregate) block masonry with solid blocks, exceeding. 10 cm in width and setting in cement mortar 1:4 complete all as specified and directed.

M&L for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified and directed.

M&L for Roof trusses(framed), trussed, purlins, crane gantries, rails, fastenings and heacy bracketbframing(Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe410-W (Gde-E-250 quality A), complete all as specified and directed.

S&F for Pre painted gavalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screrws, complete all as specified and directed.

S&F for Pre painted gavalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screrws, complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8 type D2 (40 mm graded stone aggregate), finished even & fair, complete all as specified and directed.

M & L 40mm thick Cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate), floor finished even and smooth, complete all as specified and directed.

M&L for glass dividing strips, 3 mm thick 38mm width and inserted in position, complete all as specified and directed.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking, made by table vibratory method using PU mould, laid in required colour & pattern laid over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

Taking down cement plaster on brick or stone walls, ceilings, etc including racking out Joints, hacking for key, scrubbing down with water, complete all as specified and directed.

M&L for 15mm thick Rendering in CM 1:4, on othe than fair faces of brick work or concrete surfaces mixed with WPC all as specified and directed. Note : WPC shall be measured and paid separately

M&L for 10mm thick Rendering in CM 1:6, on fair faces of brick work or concrete surfaces all as specified and directed.

M&L prepaeation newly plastered of wall surfaces and applying two coats of cement base paint over a coat of primer all as specified and as directed directed.

M&L prepation of newly plastered wall surfaces and applying three coats of white wash, all as specified and as directed.

Supply only Intergral waterproofing compound

M&L for Preparation of old treated of wall surfaces and applying one coat of cement base paint, all as specified and as directed.

M&L for preparation of old treated wall surfaces and applying two coats of white wash, all as specified and as directed.

M&L for Preparing old surface of wood and wood based material of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint, all as specified and as directed.

M&L for Preparing old surface of steel and steel based material of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint, all as specified and as directed.

M&L for preparing new steel and iron surfaces of any description over 10 cm in width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide primer, all as specified and as directed.

M&L for preparing new steel and iron surfaces of any description not exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, all as specified and as directed.

Demolition of concrete in above ground floors and pavings not exceeding 15 cm thick, all as specified and as directed.

Dismantling timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 Sqcm in section, all as specified and as directed.

Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridge sheets, all as specified and as directed.

Removal of debris/building material out side the campus including loading and unloading, etc to a distance exceeding 5 Km but not exceeding 10 km out side the MD land complete all as specified and directed. Note:- Location and permission of depositing the building materials/debris disposal outside the MD land shall rest with contractor at his own arrangement.

UNIQUE INDIA CONSTRUCTIONS

Rajapriyaconstruction

S.RAMACHANDRAN

E.G.R CONSTRUCTIONS

NAVEEN ENTERPRISES

KRISHNA ENTERPRISES

p.chinnasamy

T C KARUNANITHI

S KUMARAN

eurekaenterprises