REPAIR/REPLACEMENT OF ROOF TRETAMENT, ARREST THE LEAKAGE /SEEPAGE, GI TUBING, PVC TANK AND CERTAIN ALLIED WORKS IN CERTAIN OFFRS MD

Amount

Demolition of cement concrete of any description and in any position not otherwise provided for including taking down old existing roof treatment (screed bed/tarfelt/App membrane )complete all as specifed and directed

M&L for providing PCC type B-1 (1:2:4) using 20 mm graded aggregate as in roof padding/kerbs or mud stops,rounded or chamfered angles and throating on edges complete all as specified and directed

M&L for applying acrlic based waterproofing flexible liquid single component, weather resistant acrylic waterproofing membrane for all types of exposed roof slabs (new and old) terraces (slopped and flat) etc. using ultra voilet rays and heat reflecting system complete all as specified and directed

Taking down cement plaster of any description from wall/ceiling including raking out joints hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for renderig 15mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete of walls, chajja, fins, facia etc upto 3 stories height mixed with water proofing compound (ISI Marked) @ 200ml per litre by weight of cement or as per manufacturer's instructions, finished even and smooth without using extra cement complete all as specified . Note :- 1. Supply on water proofing compound shall be measured and paid separately. 2. Cost of scafolding for rendering is included in quoted rate. 3. Rendering will be done in two layer. Ist layer will be 10-12mm thick and 2nd layer will be 3-5 mm thick

Supply only water proofing compound complete all as spd and directed

M & L preparation of newly plastered surfaces of roof projection, fascia,walls and applying two coats of cement based paint complete all as specified and directed.

Demolition of RCC work of any description and in any position complete all all as specified and directed.

M&L for Nominal mix using RCC 1:1.5:3 type A-1 (using 20 mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.

M&L TMT bars 10 mm dia and over cut to length bent to shape required including cranking, bending, hooking ends and binding with MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L TMT bars but 6 to 8 mm dia as in stirrups cut to length bent to shape required including cranking, bending, hooking ends and binding with MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for providing drip moulding or small weather groove n exc exc 15 cm width or girth including cutting to edges all mitres and stopped ends for roof projection/chajjas/fair fascia including necessary formwork complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 etc complete all as specified and directed.

Demolition of PCC in ground floors and pavings not exc 15 cm thickness below or above ground level complete all as specified and as directed.

M&L Cement Concrete 1:3:6 Type C-2 using (40mm graded aggregate), 75mm thick as in Plinth Protection/ Foot Path, laid in alternate bays, finishing Concrete Surfaces Even and Smooth without using Extra Cement complete all as specified and as directed.

S&F cast iron soil waste and vent pipes in any length with or without ears with lead joints in trenches or in floors or wall using sand cast CI pipes 100 mm bore pipes etc complete all as specified including dismantling old pipe complete all as specified and directed.

S&F cast iron soil waste and vent pipes in any length with or without ears with lead joints in trenches or in floors/walls using sand cast CI pipes 75mm bore pipes etc complete all as specified including dismantling old pipe complete all as specified and directed.

S&F 110mm bore Cast iron bend, any radius complete all as specified and directed.

S&F 75mm bore Cast iron bend, any radius complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections, including removal from site complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections, including removal from site complete all as specified and directed.

Supplying and laying of 20 mm diameter CPVC pipes SDR 13.5 & Plain CPVC SDR 11 fittings as per IS:15778 laid in trenches /Fixed to walls complete all as specified and as directed.

Supplying and laying of 16 mm diameter CPVC pipes SDR 13.5 & Plain CPVC SDR 11 fittings as per IS:15778 laid in trenches/ fixed to walls, floor and ceiling etc complete all as specified and as directed.

Disconnecting existing tanks, setting aside (or lowering if required) for Cleaning and removing all Scales and dirts from the Tank and mouths of Circulating Pipes, etc. after draining out Water from the Tank of capacity exc. 250 LITRE but not exc. 500 LITRE, cleaning the Tank by scrubbing the deposits with Wire Brush, writing Letters "CLEANED ON DD.MM.YYYY" (i.e. date of Cleaning of Tank) not exc. 50mm in height afterand hoisting if required reconnecting and re-fixing in position. in position complete all as specified and as directed.

Disconnecting existing tanks, setting aside (or lowering if required) for Cleaning and removing all Scales and dirts from the Tank and mouths of Circulating Pipes, etc. after draining out Water from the Tank of capacity exc. 500 LITRE but not exc. 1000 LITRE, cleaning the Tank by scrubbing the deposits with Wire Brush, writing Letters "CLEANED ON DD.MM.YYYY" (i.e. date of Cleaning of Tank) not exc. 50mm in height afterand hoisting if required reconnecting and re-fixing in position. in position complete all as specified and as directed.

S&F rotational moulded polythene water storage tank of capacity 500 ltrs (Cylindrical/vertical with closed top), triple layer construction, ISI marked, hoisted & fixed in position including over flow 450mm, waste pipe 600mm long with all fittings such as dead plugs and checknuts etc. of 20 mm dia including dismantling of old PVC tank (Capacity 250- 500 Litres) & removing to where directed complete all as specified and as directed.

S&F rotational moulded polythene water storage tank of capacity 1000 ltrs (Cylindrical/vertical with closed top),triple layer construction, ISI marked, hoisted & fixed in position including over flow 450mm, waste pipe 600mm long with all fittings such as dead plugs and checknuts etc. of 20 mm dia including dismantling of old PVC tank (Capacity 500- 1000 Litres) & removing to where directed complete all as specified and as directed.

S&F ball/ float valves high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed 20mm bore pipe minimum weight 210 gms complete all as specified and as directed.

S&F in repair ball/ float valves high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed 20mm bore pipe minimum weight 210 gms complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provideded for etc complete all as specified and directed.

S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for two coat of synthetic enamel paint over one coat of red oxide primer on new steel surface of any description over 10 cm width or girth complete all as specified and directed.

S&F Stack clamps for 100 mm bore sand cast iron pipe made out of 50mm x 5mm flat and 16 mm dia round iron stays,including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S&F Stack clamps for 75 mm bore sand cast iron pipe made out of 50mm x 5mm flat and 16 mm dia round iron stays,including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

MOHAN SINGH BHADORIA

M/S YOGANSH CONSTRUCTION CO.

M/s Anjali Construction

M/s. Ravi and brothers

Sunil Traders

JAY PRAKASH SHARMA

RAVINDRA SALES