WBPHED/EE/AMD/ NIeT-28 of 2026-2027/1

Jungle cutting, cleaning compound premises or shrubs, plants, jungles etc. by cutting and removingas directed.(Specific permission of Engineer in Charge prior to execution will be necessary)

Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC: 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all completes.

Earth work in filling in compound, tank, low land, ditches etc. with good earth, in layers not exceeding 150 mm. including breaking clods and consolidating the same by ramming and dressing complete.(Payment will be made on profile measurement before and after the work)-a) With earth obtained by fresh excavation upto 1800 mm. depth(including the cost of excavation from land arranged by the Deptt. within a lead of 100 m.)-For levelling up front and side area.

Cutting the existing 6 inch thick concrete road using a mechanical road cutter/vibrator, executing the necessary earthwork excavation, laying a 40-foot length and 200mm of Mild Steel (M.S.) piping to efficiently drain surface water from the front side of the bottling plant's main gate and connect it securely to the high-drain sludge removal system, making good all damaged surfaces, backfilling the excavated gaps with Plain Cement Concrete (PCC), and levelling the finished surface to match the surrounding profile, completely finishing the entire work in all respects as per the direction of the Engineer-in-Charge (EIC).(MS pipes Supplied departmentally)

Clearing and cleaning all types of plastic waste—including plastic caps, empty bottles, premature bottles, and bags—from the roof surface, transferring and disposing of the collected debris into the designated dustbins by engaging unskilled labor, and completely finishing the work in all respects as per the direction of the Engineer-in-Charge (EIC).(5nos manual labour)

Supply of 4 Core X 4 Sqmm Aluminum Armored, XLPE insulated 1.1 K.V. grade cable, conforming to IS:7098(I) as per direction of EIC.(Make:-Gloster/other approved in vendor list.)

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed. (From DB to pole)

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :-4 Core X 4 Sqmm.

Supply of 90 Watt LED Highly efficient IP66 LED street-light with aluminium pressure die-cast housing, toughened glass in the front and peanut lens for batwing light distribution,higher spacing between poles and maintenance-free system.(Make:-Approved Make)

Fixing outdoor type fluorescent/SV/MV light fitting on pole including S&F 40 mm dia x 1.68 mts. long GI Pipe (ISI-Medium) bracket with 40 mmx10 mm thick, MS clamp etc. and providing wiring with 2x1/1.40 PVC insulated and sheathed wire (single core) from loop box at the base of pole to light fiting through pole & bracket (without control switch) including making connections & painting.